Maintenance work

Dismantling the damaged Brick work in cement mortar under 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Countrywood frame with scantling above 2m for doors including labour charges for wrought and putup and fixing holdfast in frame etc., complete complying with standard specification and as directed by the departmental officers.

Renewing the damaged double skin wall panelling using 21/2"x11/2" Aluminium Channel 2"-0" intervals on both directed and fixing 12mm thick anti termites water proofing plywood using screws etc., and finishing with 1mm thick special texture super matt laminate sheet of approved quality and colour with grooves using fevicol etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Providing Fully Calcium Silicate HILUX BOARD partition using alu box section and aluminium frame at an interval of 0.75m at the aluminium frame of size 63.50mm x 38.10mm x 1.28mm, 1.41mm at 0.8158 kg/m wih necessary'L' Angles, Screws, nails and fixed in the wall using drilling machine with neat straight alignmnets etc., after finishing the frame work and fixed with Both side 12mm thick HILUX BOARD approved quaility and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch Box and AC plug Box and Telephone Box requirements and finally cleaning the wooden partition for both side with neat position etc. The partition both side should be finished with best wall putty and painting two coats of Interior emulsion paint over one coat of primer including preparaion of surface etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and paritition work, transporting charges etc., complete as directed by the departmental officers.

Renewing and refixing the damaged broken false ceiling with new one of "Gyp board false ceiling using 10mm thick Gypboard of approved quality design pattern and drops given by the deptl officers. Using "U" shaped galvanised iron channel of size 25x25x0.55mm thick at 1.20mc/c on both longtitudinal and cross fixing "U" shaped G.I channel of size 50x10x0.55mm thick, direction for vertical sup port and at 0.90m centre to centre on longtitudinal direction respectively for Horizontal support by using teak wood reepers at corners and at intermediately and fixing the "GYPBOARD" on the panel provided as per design/pattern given by the deptl officers. And fininshing the ceiling surface with same plaster of paris materials etc.Necessary openings should be could with Acrylic paint made for providing spot light, floursent tubes in the ceiling by using kit ply 12mm thick and openings should be std specfn and etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm with pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Renewing the damaged broken unserviceable Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia (Parryware) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing approved best quality brass CP towel rod 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Renewing the damaged broken unserviceable two way tap including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing and fixing Angle Cock with new one of Jaquar make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing approved best quality porcelin soap dish of size 150 x 150 x 50mm (white/colour) including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Exec- utive Engineer before use on works). - White / Colour

Supplying and fixing in position S.S 304 grade crimped wire mesh square hole shape 3mm thick etc., complete complying with standard specification and as directed by the departmental officers.The rate including cost of material labour for fixing conveyence and cutting to required size etc.,

Repolishing the mosaic flooring including polishing stone and hire charges for polishing machine but excluding cost of electrical charges

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Best Varnishing Wood work two Coats of approved quality in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality of paint should be got approved by the Executive Engineer before use on works.)

Painting the old wood work two coats in all floors with best Synthetic enamel paint of approved quality, colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Please Enable Macros to View BoQ information