REPAIR TO INTERLOCKING PATHS DRAINAGE SYSTEM FENCING BOUNDARY WALL HARD STANDING AND GATES AT VARIOUS LOCATIONS UNDER AOR OF AGE BR II AT AFS CHAKERI KANPUR

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for cement concrete 1:3:6 type C -2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brick work old size with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Ditto all as per item No 5 above but except bricks. Note:- Old bricks obtained from item No 1 shall be reused.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded aggregate ) in copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) mixed with WPC as per manufacturer instruction on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement, complete all as specified and as directed. Note:- WPC shall be measured and paid separately as "Supply only"

Supply only liquid water proofing compound

M & L for preparing new plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M & L for preparing old decorated surface and applying two coats of cement base paint complete all as specified and as directed.

Demolition of reinforced cement concrete of any description complete all as specified and as directed.

S&F SFRC drain/manhole cover 'heavy duty' of overall size 600mm x 450mm x 100mm factory made complete all as specified and as directed by Engineer-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s Polycrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE” (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame

M&L cement concrete Type C- 2, 1:3:6 using 40 mm graded stone aggregate as in surface channel and drain, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L cement concrete Type D-2, 1:4:8 (using 40mm graded stone aggregate) 100 mm thick as in sub base complete all as specified and directed,

M&L for sand filling /sand cushioning for bed of interlocking tiles complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block glazed, coloured any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and pigment, laid over sand cushioning complete all as specified and as directed. Note:- Sand cushioning shall be measured and paid separately.

M & L polished Chequered cement concrete Coloured tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment laid on screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over and includindg 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster in CM 1:4 complete all as specified and as directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 mix (using 40mm graded stone aggregate) as in flooring /paving/plinth protection including finishing even & smooth w/o using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire mesh of any description complete all as specified and directed

Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded in concrete or brick portion and making good disturbed complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L Cement Concrete Type B- 2 1:2:4 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S &F mild steel section as in posts and struts in fencing including cutting tops to shape as difillets (for securing wire meshrected, drilling holes notching for wire, etc.; flat iron,etc.) including all necessary and similar work conforming toFe-290 Gde E-165 complete all as specified and as directed.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F for 1.00 m dia concertina coil hot dip prime galvanized punched tape string core ( 2.8 mm thick wire of risn tensile strength of 165 Kg/ 50 mm tape ( 0.52mm thick) and having 0.91 m dia (apprx) after stretching, streched length of 9.00 m (maximum) including GIU clips for laying over boundary with angle iron complete all as specified and directed.

M & L for restraining re-scuring including making good staples etc galvanised. 2 strand, steel barbed wire of any description and restraining and refixing to any type of standard rails straining bolts, including, securing or tying at crossings with complete all as specified and as directed.

Supply only chain link fencing M S galvanised fencing of square any size or type complete all as specified and as directed.

Fixing only chain link fencing or welded wire mesh of any description complete all as specified and as directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of old painted steel surface and applying one coats of synthetic enamel paint complete all as specified and as directed

M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer of same make complete all as specified and as directed

Removing debris etc lying at different locations to a distance exc 5 Km, including loading, unloading and stacking/spreading at the destination as ordered by Engr-in-Charge complete all as specified and as directed.

M&L digital heavy duty parking coloured tile of size 300mm x 300mm x 15mm thick outdoor full body vitrified laid over and including 20mm thick screed bed / bedding layer in CM 1:6 complete all as specified and directed

M&L 300x450mm, ceramic vertical 3D tiles, matt/gloss finish, 5mm to 6mm thick tiles with high definition and digitally printed over 10 mm thick rendering (1:4) on vertical surface as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed

S & F framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F 1.25mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Taking down steel rolling shutter of any descriptipn including top cover complete all as specified and as directed.

S & F Steel rolling shutters, made out of 1 mm thick steel lathing with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.

S&F steel rolling shutters made out of 1.25 mm thick steel lathing, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150 mm complete all as specified and as directed.

Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) 100mm (internal dia) set in cement mortar including haunching and bed concrete complete all as specified and as directed.

S&F for multilayer UPVC Pipes 160mm nominal dia (out side dia) SN2 (SDR 51) wall thickness 3.20 to 3.70mm confirming to IS 16098 (Part-I) laid in trenches end jointed with elastomeric sealent for drainage and sewage purpose complete all as specified and as directed.

S&F for multilayer UPVC Pipes 200mm nominal dia (out side dia) SN2 (SDR 51) wall thickness 3.90 to 4.50mm duly ISI marked laid in trenches end jointed with elastomeric sealent for drainage and sewage purpose complete all as specified.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed.

-ditto- but for dia of pipe 200mm.

Scraping and removing sand to a distance exc 50 metre but not exc 250 metre from slanted base of firing range. Note : (i) The height of one end of slanted base of firing range is approx 1.50 mtr from surrounding GL and height of other end is approx 6.00 m from surrounding GL. (ii) The quoted unit rate is deemed to included loading and unloading of sand.

Labour only for filling of mixture of ganga sand and saw dust (in equal proportion by voulme or as directed by Eng-in-Charge) including spreading and levelling in layers not exc 25 cm in slanted base of firing range complete all as specified and directed. Note : - (1) The height of one end of slanted base of firing range is approx 1.50 mtr from surrounding GL and height of other end is approx 6.00 m from surrounding GL. (1) Labour element for mixing of sand and saw dust is deemed to included in quoted unit rate (2) Sand and saw dust will be measured and paid seprately.

Supply only Ganga sand complete all as specified and as directed

Supply only saw dust complete all as specified and as directed.

M & L for pre - cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole cover / drain covers set in CM 1:6 etc complete all as specified

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips qual

smc system & services

JOG CONSTRUCTION

M/S ASM ENTERPRISES

SHASHI CONTRACTORS

aarohi nirman company