03 - Main gate se chini mill gate tak CC road ka nirman kariya.

Granular sub-base - Providing & laying granular sub-base by well graded material grade-I,spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC,and compacted with smooth wheel roller to achieve the desired density,complete as per Technical Specification clause 401 of MORD [Sir No 4.1]

W.B.M. G3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 sr no 4.7-(3) - WBM Gr-III (22.4-53 mm size )of stone ballast from and screening material type B-( 11.2mm for Grading 3 @0.18 cum per 10-sqm). from approved Quarry

C.C, ROAD Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.

DRAIN - Const. Of U-Drain on Both sides in Abadi Portion(as per sheet attached).

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Road Furniture Direction Sign Board of 4'x3' size having 18 gauge sheet with the post of 1-1/4" dia. white & Red alternate Painted Pipe incl. fixing in c.c. of 1:2:4 cement , c.sand & stone grit with piller.