CONSTRUCTION OF PROPOSED SHOP AND HIGHRISE RESIDENTIAL COMPLEX AT SANT HIRDARAM NAGAR MANDI NEAR GULAB GARDEN BHOPAL BLOCK B

Amount

CONSTRUCTION OF PROPOSED SHOP AND HIGHRISE RESIDENTIAL COMPLEX AT SANT HIRDARAM NAGAR MANDI (NEAR GULAB GARDEN) BHOPAL (BLOCK B)

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil:

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil: ROCKY STRATA INCLUDING BOULDERS 200 MM DIA.

Boring/drilling bore well of required dia perfectly vertical to receive casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. ROCKY STRATA INCLUDING BOULDERS 200 MM DIA.

Supplying, assembling, lowering and fixing in vertical position in bore well UNPLASTICIZED PVC MEDIUM WELL CASING (CM) PIPE OF REQUIRED DIA CONFORMING TO IS : 12818 INCLUDING REQUIRED HIRE AND LABOUR CHARGES FITTINGS AND ACCESSORIES ETC. ALL COMPLETE FOR ALL DEPTHS AS PER DIRECTION OF ENGINEER-IN-CHARGE. 200 MM DIA

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. CLAMP of recquired dia made of 100x10mm flat top of casing/housing pipe of tubewell as per is: 2800(part i) including necessary bolts and nuts of required size complete.

TUBE WELL PUMP SET L.S

Supplying and drawing of stranded aluminium conductor steel reinforced (ACSR) conforming to IS:398-1976 of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc. ACSR 0.1 sq inch (100 sq.mm Al. EQ.)- (Dog)

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor Unarmoured 1 core 70 sq. mm. (AS PER PWD SOR 2020)

Supply of approved high-tension XLPE cable (conforming IS-7098/II/85) as per ISI standard single core armoured with alu. solid/stranded conductor ISI marked as required Single core XLPE cable 11 Kv grade 185 sq. mm.

Supplying & installing totally enclosed 3 phase meter box of suitable pattern as per MPSEB requirement, fabricated with 16 SWG MS sheet duly painted with 2 coat of red oxide primer and 2 coat of synthetic enamel paint, suitable space to accommodate LPR type LT meter with CT's/HT trivector meter, providing required mounting plate/strip for energy meter, TTB & CTs, glass window for meter reading, incoming/outgoing cable, connection with proper size of lugs, earthing terminals etc. complete with all materials including providing, installing, testing/calibration from MPSEB (testing/calibration charges of meter and CTs will be bourn by agency) and connecting the following meter: CT operated 3 Ph. 4 Wire, 0.5 accuracy class LT DTR energy meter with LPR feature including GSM, modem etc. with 4 No. resin moulded 100/5 or 200/5 or 300/5 ratio LT CT as per MPHBSOR.

Supplying, installation, testing and commissioning of oil immersed, .5 accuracy class, 50 Hz CT PT combined unit complete with all other materials as required including testing / calibration charges of Electricity board as required. 11 KV/110 V, 3 phase 4 wire CT PT combined unit, 300-150/5Amp. or 200- 100/5Amp. or 100-50/5 Amp. CT ratio

Aluminium wound 100 KVA AS PER MP PWD SOR 2020

Aluminium wound 200 KVA AS PER MP PWD SOR 2020

Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided upto 2.00 mt. apart or as required with angle iron/ flat iron members /cross members including mesh fix on frame and erected between the post. The angle iron post shall be erected in cement concrete M- 15 (1:2:4) (20 mm graded metal) foundation, cement concrete, excavation of pit and refilling the same. The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade. AS PER MP PWD SOR 2020

Supply, installation, testing & commissioning of HT trivector energy meter, 3 phase 4 wire, 110 Volts, 5 Amp, accuracy class 0.5S with GSM (GPRS compatible) intelligent modem for consumer (store N forward type) suitable for required C.T. including uPVC box/sheet metal box with TTB duly tested from electricity board.

Supply, installation, testing & commissioning of LT trivector energy meter, DLMS compliant category-A (for substation/feeder metering) , 3 phase 4 wire, 440 Volts, 5 Amp, accuracy class 0.5S with GSM(GPRS compatible) modem suitable for required C.T. 5A duly tested from electricity board with uPVC box . AS PER AS MP PWD SOR 2020

Supply, installation, testing & commissioning of HT trivector energy meter, DLMS compliant category-A (for substation/feeder metering energy audit), 3 phase 4 wire, 110 Volts, 5 Amp, accuracy class 0.5S with GSM (GPRS compatible) modem suitable for required C.T. including uPVC box/sheet metal box with TTB duly tested from electricity board. AS PER MP PWD SOR 2020

Supply of XLPE insulated power cable (confirming IS-7098 Part-I)1100 Volt grade, 1 core/2 core/3 1/2 core/4 core ISI marked with Allu. stranded/soild conductor)

Supply of XLPE insulated power cable (confirming IS-7098 Part-I)1100 Volt grade, 1 core/2 core/3 1/2 core/4 core ISI marked with Allu. stranded/soild conductor)

2.5 LB capacity NOVEC 1230, DLP assembly with automatic valve, push in connector for tube, 2.5 LB NOVEC 1230 gas, mounting bracket, end of line adopter and low pressure switch for monitoring system activation.

5 LB capacity NOVEC 1230, DLP assembly with automatic valve, push in connector for tube, 5 LB NOVEC 1230 gas, mounting bracket, end of line adopter and low pressure switch for monitoring system activation. AS PER MP PWD SOR 2020

10 LB capacity NOVEC 1230, DLP assembly with automatic valve, push in connector for tube, 10 LB NOVEC 1230 gas, mounting bracket, end of line adopter and low pressure switch for monitoring system activation AS PER MP PWD SOR 2020

Master control unit with audio visual alarm with wiring to make complete system operational. The control panel should have provision for integration with fire alarm/SCADA/BMS system. AS PER AS MP PWD SOR 2020

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 100mm dia

Providing, laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, anges, reducer, jointing with nuts bolts, gaskets and welding etc.and fixing the pipe on wall/ ceiling with sutable hangers, clamps,supports, as required and painting with two or more coats of synthetic enamel paint of required shade complete as directed by Engineer-in-Charge. 100mm dia

Providing and fixing single headed hydrant valve with instaneous female Gun metal couplings of required dia with cast iron wheel lSI marked conforming to IS 5290 (Type #A) with blank gun metal cap and chain, adopter as required complete as directed by Engineer#in# Charge.63 mm dia

providing and fixing c.i. dirt box strainer for bulk type water meter with nuts bolts rubber insertion ect. complete conforming to is 2373 100 mm dia

Providing, installation, testing and commissioning of gun metal valves of following sizes as required.25 mm dia.

Supplying and fixing following dia, 15 mtr long RRL hose pipe with following dia male and female gun metal couplings duly binded with GI wire, rivets etc. confirming to IS 636 (type-A) as required. 63mm dia

Aid hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with the following as required. (a) 30/36m long, 20 mm (nominal internal dia) water hose thermoplastic (textile reinfirced ) type -2 as per IS 12585 (b) 20mm (nominal internal) dia gun metal globe valve and nozzle. (c) Drum and brakets for fixing the equipments on wall. (d) Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe.

Supplying and fixing hose cabinet of size 900mmx600mmx500mm made of 2 mm thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15mtr. Long hose pipe, 1 no branch pipe mounted on wall or raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant, as directed by Engineer-In-Charge.

Supplying and fixing 63mm gun metal branch pipe with 20 mm (nominal internal diameter) size gun metal nozzle conforming to IS 903, suitable for instaneous connection to interconnect hose pipe coupling as required.

Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 100mm dia

Supplying and fixing 4 way fire brigade connection of cast iron body with 4 nos. gun metal male instantaneous inlet couplings complete with cap and chain as required. For 150mm dia MS pipe connection, confirming to IS 904 as required.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

in MS pipe line (pressure range 0-10 kg/cm) suitable for 12 volts /24 DC. Including connection etc as required.

the MS pipe Line including connection etc. as required.

Providing, installation, testing and commissioning of dual plate non- return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 100mm dia

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 4.5 Kg.

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6 Kg.

Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket confimimg to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. Capacity 6 Kg.

POINT WIRING IN SURFACE RIGID P.V.C CONDUIT SYSTEM WITH FLUSH TYPE ACCESSORIES CIRCUIT WIRING WITH PVC INSULATED CABLE FR WITH COPPER MULTI STRAND CONDUCTOR ISI MARKED IN SURFACE RIGID P.V.C CONDUIT (MMS)OF ISI MARKED SUITABLE SIZE INCLUDING PAINTING ETC. AS REQUIRED AS PER SPECIFICATION (A) 2X2.5 SQMM

MANUAL CALL POINT PROVIDING AND FIXING OF MANUAL CALLPOINT FLUSH OR SURFACE MOUNTING FRONT PROTECTOIN GLASS COVER UNBREAKEBLE GLASS ABS PLASTIC BODY

INTERNAL HOOTER PROVIDING AND FIXING OF INTERNAL HOOTER WITH WORKING AC VOLTAGE 220 V A.C/24V DC CURRENT CONSUMPTION SOUND OUTPUT 120 DB MATERIAL

Linear pneumatic heat detection tube with all necessary fittings & supports. AS PER MP PWD SOR 2020

Bidder Name

Amount

Technocraft Infrastructure(GSTN-23ABEPJ8137C1Z2)