Special Repair for Bldg No P-63 CHDH and Bldg No P-67 of Stn Wksp EME under GE (West) Delhi Cantt-10

Amount

Demolition of cement concrete (un-reinforced) as in sunken floors, paving and any position and any thickness upto seven story building including removal of rubbish out side complex (MOD land) , complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work built in Cement mortar incl all quoins,arches,pillars etc and removing the debris out side MoD land complete all as specified and directed.

Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed.

All as per item No. 4 above but 20 mm bore complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed.

Demolition of Stone slabs and tiles complete all as specified and directed of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling old APP/tar felt membrane on roof complete all as specified and directed.

M&L for wire brushing and cleaning top surface of existing roof surface, including flashings and junction of parapets, etc. complete all as sepcified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone agg) cement concrete as in roof padding etc. including necessary use of formwork (straight or curved) complete all as specified and directed.

M&L for 10mm thick screed bed or bedding layer of mortar in CM 1:4 with water proofing liquid as per manufacturer instructions when concrete is a still green etc complete alll as specified and directed. (Note:- Water proofing liquid shall be measured and paid separately as supply only)

M&L for applying a coat of bitumen primer confirming @0.50 ltr/ Sqm on prepared surface of plaster and applying a coat of hot blown bitumen 85/25 gde @1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 150 grm/ sqm) and sealing joints by forced application complete all as specified and directed.

Supply only Liquid water proofing compound, complete all as specified and directed.

M&L for plain cement concrete tiles 25cm x 25cm x 22mm thick laid on 15mm thick cement mortar screed bed in CM (1:4) and incl joints grouted flush and pointing with grey cement and pigment in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, mass filling, sub base and the like all as specified.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in levelling course complete all as specified and directed.

M&L for machine cut kota stone slab flooring of size 550mmx550mm 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 thick screed bed in CM ( 1:4) complete all as specfied and directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M & L for coloured glazed ceremic tiles in vertical surfaces 450X 350X 7mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering as a backing coat in CM (1:4) complete all as specfied and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L Brick work with well burnt sub class 'B' brick staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed complete all as specificed and directed.

M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and smooth without using extra cementcomplete all as specified and directed.

M&L rendering 10mm thick cement plaster in cement mortar (1:6) finished even & fair without using extra cement on brick/concrete surfaces complete all specified and directed.

M&L 10mm thick rendering in cement mortar (1:3) finished even & smooth without using extra cement on brick/concrete ceiling surfaces complete all specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (coating of sheet not less than 150 GSM) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, slightly/completly rounded or chamford as per site requirement fixed with self tapping screws complete all as specified and directed.

All as per item No. 30 above but except sheet,complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (coating of sheet not less than 150 GSM) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walkways railings frame work for roof covering & similar confirming to Fe 290 Gde-E-165 complete all as specified and directed.

Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including all necessary fitting,extra joints and stack clamps stay including bolts and nuts complete all as specified and directed. (Note : work will be executed up to G+6 storey height building)

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Dismantling of 100 mm dia Cast Iron pipe (Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed.

All as per item No. 37 above but 75mm dia.

S&F 100 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed.

S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed.

S&F 100 mm dia (bore of pipe) cast iron bends,Tee, diminishing pieces or tapers with cement joint fixed complete all as specified and directed.

All as per item No. 41 above but 75mm dia (bore of pipe)

S&F in repairs Cast iron floor trap with 75mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M & L for cutting chases, pinning in brick wall for concealed GI/CPVC pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fitting and fixtures required complete all as specified and directed.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fitting and fixtures required complete all as specified and directed.

S&F 25mm outer dia CPVC gate valve fixed for CPVC pipe complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.

S&F 1000 ltrs capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position and dismantling of old tank complete all as specified and directred.

S&F in 25mm outer dia CPVC tank nipple fixed for CPVC pipe complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified.

S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipe complete all as specified and directed.

S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed.

S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed.

S&F in repair brass CP bib taps long body 15mm bore with lever type handle complete all as specified and directed .

S&F in repair sheet glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed .

S&F in repair sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed.

S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed.

S&F in repairs chromium plated brass overhead shower rose 100 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed .

S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed.

S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE .

S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P or S trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed.

S&F in repair 15mm dia sink mixer chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers including coupling and waste pipe, fixed in RCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Taking down door/window frames with shutters with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & a complete all as specified and directed.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specified and as directed.

S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to doors with SS screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed.

S&F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire cloth complete all as specified and directed.

S&F mild steel work as in hold fast of flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed.

S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of pink primer including preparation of surface complete all as specified and directed.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of redoxide primer including preparation of surface complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed. Cost of EPDM,neoprene rubber,roller etc also included in the item.

S & F 4mm thick ordinary sheet glass fixed with clips and putty or with aluminium snap beading complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed.

M & L for 750 mm wide, 75 mm thick cement concrete 1:3:6(Nominal Mix) with 40mm crushed stone aggregate finished even and fair over 75mm hard core, laid to slope of 1 in 12. It shall be laid in alternate bays,each bay not exceeding 3m length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and two parts of heated sand.The toe of plinth protection of size 75 mm deep and 75 mm wide shall also be of PCC 1:3:6 type C2 complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified..

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

S&F in repair 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and finials approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished chequered tiles 30cmX30cmX25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:4 and cut and pointed with white cement and pigment complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for preparation of newly plastered surface of walls applying two coats of oil bound distemper over and including a coat of primer, over and including a coat of wall care putty not less than 1 mm thick complete as specified and directed.

M & L for preparation of newly plastered surface of ceiling applying two coats of oil bound distemper over and including a coat of primer, over and including a coat of wall care putty not less than 1 mm thick complete as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over and including a coat of wall care putty (minimum thickness 1 mm) and a coat of primer complete all as specified and as directed.

M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed.

M & L for complete removal of existing treatment from walls and applying two coats of Oil Bound distemper with rich matt finish with roller over and including a coat of primer,over and including a coat of wall care putty (not less than 1 mm thick) complete all as specified and directed. .

M&L for applying Two coats of 100% Premium acrylic emulsion(Weather coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over putty not less than 1.0 mm after complete removal of existing treatment on old surface complete all as specified and all as directed by Engr-in-Charge .

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 18-20mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc.

Point wiring complete with two run 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to surface roof/truss/columns portions etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated modular metal flush box concealed in walls with suitable modular inner and outer cover plate for housing modular switches , socket outlet and fan regulators etc , complete all as specified and directed for the followings:-

(a) One light/Fan/bell/Exhaust Fan point controlled by one switch

(b ) One socket outlet point 5 Amps on independendent board

(c ) One socket outlet point 5 Amps controlled by one switch on same board along with other switches.

All as per item No 108 above but with 2 run copper conductor cable FLRS 4.0 sqmm for one 3 pin modular socket outlet,15 Amps concealed and including provision of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Supply and fix switch modular type single pole 1 module one way 6 Amps all specified and as directed.

Supply and fix modular socket 2/3 pin combined 2 module multi purpose 6 Amps flush type complete all as specified and directed.

Supply and fix modular socket 2/3 pin combined, 6/16 Amps 2 module complete all as specified and directed.

Supply and fix modular switch 16 Amps one module single pole one way complete all as specified and directed.

Supply and fix modular ceiling fan regulator , step type for ceiling fan 120 w -2 module complete all as specified and directed.

S&F ceiling rose surface PVC 65x50 mm isolated body type with three terminals,3 phase complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted 4 feet system wattage of 20 watts and system lumen>120 output ,CRI > 80, power factor > 0.95, THD < 10%, color temperature 3000K- 6500 K , IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted 2 feet system wattage of 10 watts and system lumen>120 output ,CRI > 80, power factor > 0.95, THD < 10%, color temperature 3000K- 6500 K , IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repair 35 watts High efficient LED Building Security light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is >100lm/W .The color temperature is around 6500 K .The luminaire is IP:66 protected It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 150-270V.Complete as specified and directed.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 54 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix DB TPN 4 way verttical, IP - 54 Protection double door 440 V AC 50Hz with for MCCB 125 Amp,4P as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ C curve complete.

Supply and fix MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ C curve complete.

Supply and fix MCCB 125 Amps ,3P ,415 volts 16 KA 50 HZ complete.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including PVC unsheathed copper conuctor cable of 6 Sqmm size S/C as earthwire, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories Concealed in walls/surface on ceiling and column,beam including taking down of old sub main wire all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated solid aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section and 4 core in service connections dully connected with TPN DBs and LT panels with Lugs complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point earth plate surrounding use of charcoal dust and salt in layer including excavation and earth work , GI pipe 20 mm dia light grade for watering with wire mess and funnel and GI pipe 15 mm dia medium grade for protection of earth lead complete upto main TPN DB making of PCC earth pit using 1:2:4 type B1 using 20mm dia stone aggregate provision of MS PIT cover 300mm x300mm with handle complete all as specified or indicated including testing on completion all as directed.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades,heavy duty, and frame and louvers shutters, including taking down of old exhaust fan and deposit it to the MES store yard complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, including taking down of old exhaust fan and deposit it to the MES store yard complete all as specified and directed.

M&L for excavation in trenches in soft soil n.exc 1.5 Mtr wide and n.exc 1.5 meter in depth for laying of cables/pole etc setting out trimming the site forming bottom surface to required level complete all as specified and directed by Engr-in-Charge.

M&L for returning filling in-trenches including spreading leveling watering and well ramming in layers with soft/loose/dense soil n.exc 25 cm thick in each layer of soil complete all as specified and directed by Engr-in-Charge.

M&L for removing/excavated soil to a distance n.exc 50 Mtr and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M&L for sand cushioning with a layer of sand Jamuna 23 cm thick (8 cm under and 15 cm above the cable) in trenches complete all as specified and as directed by Engr-in-Charge

Supply and laying un-reinforced precast concrete cable covers for cable protection of class LV type 1 flat of size 250 x150 x 40 mm complete all as specified and directed.

tomar and associates (BID ID -3405795)

M/s M M BAHL (BID ID -3405652)

M/s SAAR ENGINEERS (BID ID -3405819)

Chandramauli Engineers Pvt. Ltd. (BID ID -3405684)

MINHAS CONSTRUCTIONS (BID ID -3403957)