REPAIR MAINT OF FLOCCULATOR PUMP SETS STARTERS LT PANELS AND MISC WORKS AT FILTRATION PLANT UNDER GE MIS MHOW

Amount

M & L for painting of water supply CI/ MS pipe line of size 150 mm to 400 mm bore dia after preparation of the surface of pipe line by scraping the rust / old paint properly and then applying one coat of synthetic enamelled paint of Blue colour all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connections including all fittings from trenches or on ground of 100 mm bore. complete all as specified and directed

Supply, fixing, laying & jointing galvanised iron water tubes 'medium grade' 100 mm borewith and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc. fixed on walls and ceilings or laid in floors and testing complete all as specified and directed

Taking up Cast Iron Water mains (including all fittings), with flanged ends including disconnecting pipes and fittings complete of size of 250 mm dia bore. complete all as specified and directed

Supply, laying and testing of centrifugally cast (Spun) ductile iron pressure pipe Class K-9 of size DN 250mm bore of length of 3.0mtr with both ends flanged with and including nuts, bolts & washers of suitable size for connecting, pipes duly applied with zinc coating with finishing layer of bitumen on external surfaces and cement mortar lining with bituminous seal coat on internal surfaces complete confirming to IS-8329 (2000), complete all as specified and directed by the Engineer-in Charge at site. Make : Electro steel Casting Ltd/TATA Metaliks/ Jindal Ltd / SAW Pipes. complete all as specified and directed

All as per item No.5 here-in- before but of length 2.75 mtr long

All as per item No.5 here-in- before but of length 1.75 mtr long

All as per item No.5 here-in- before but of length 1.5 mtr long

All as per item No.5 here-in- before but of length 1.25 mtr long

All as per item No.5 here-in- before but of length 1.0 mtr long

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for all flanged Tee of size 250mm x 250mm x 250 mm complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for tail piece one end flanged other end socketed of size 250mm of length 0.7 mtr complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for tail piece one end flanged other end spigot of size 250mm of length 0.9 mtr complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for double flanged bend 900 of size 250mm complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for double flanged bend 900 of size 200mm complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for double flanged bend 900 of size 100mm complete all as specified and directed. Make : Electro steel Casting Ltd / TATA Metaliks / Jindal

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for all flanged Tee of size 250mm x 250 mm x 200mm complete all as specified and directed. Make : Electro steel Casting Ltd

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for all flanged cross of size 200mm x 200 mm x 200mm x 200 mm complete all as specified and directed. Make : Electro steel Casting Ltd.

M&L for ductile iron fittings, as per IS :9523 (2000), Class K-12 for double socket collar of size 250mm complete all as specified and directed. Make : Electro steel Casting Ltd

Note : Cost of Rubber gasket, Nuts , bolts and washers of suitable size including preparation working space on walls/columns of filtration plant for fixing of DI pipes and fittings and make good the repaired/ broken surfaces is deemed to be inclusive in the quoted rate for Sl No. 5 to 19.

M&L for cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket, all ends flanged and one end flanged and other end socket) collars, caps and plug upto 150 mm bore for spigot and socket end pipes complete all as specified and directed.

M&L for cast iron bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket, all ends flanged and one end flanged and other end socket) collars, caps and plug etc from size 200 mm bore to 400 mm bore for spigot and socket end pipes complete all as specified and directed.

Supply & Fix repair Sluice valves cast iron body, double flanged, ISI marked (IS-14846), heavy duty, class PN-1.6 gun metal, with rising spindle of solid forged bronze and operating handle, including rubber gaskets, nuts, bolts, washers etc including taking up unserviceable old existing valves all as specified and as directed by Engr-in-Charge. Make "Kirloskar/ZOLOTO/ UPADHAYA" complete of following sizes: -

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Note : Cost of Rubber gasket, Nuts , bolts and washers of suitable size including preparation working space on walls/columns of filtration plant for fixing of sluice valves and fittings and make good the repaired/ broken surfaces is deemed to be inclusive in the quoted rate for Sl No. 22.01 to 22.05.

S&F of Star rubber washer suitable for coupling of Induction motor and pump of capacity 75 HP to 100 HP as per existing sample including taking out old unserviceable one. complete all as specified and directed

Supply and fixing of FRP grating of size 900 x 1000 mm for scrapper unit of flocculator complete all as specified and directed

Supply and fixing of Baffle plate of width 250 mm & 4 mm thick in FRP moulded construction complete with fixtures and fittings in SS-304 grade complete all as specified and directed

Supply and fixing of Weir plate of width 150 mm & 4 mm thick in FRP moulded construction complete with fixtures and fittings in SS-304 grade complete all as specified and directed

Supply and fixing of mild steel epoxy coated rack arms made of Angle iron of size 65 x 65 x 6 mm (ISA 65x65 rolled steel equal angles) of dimension 2 mtr x 1 Mtr x 6 Mtr at one end and2 mtr x 1 Mtr x 5 Mtr at other end to be couple/fixed with existing clarifloculator suspended from peripheral rotating bridge & with brass scraper blades of width 150 mm and rubber squeeze including taking down old unserviceable racker arm complete all as specified and directed. Note : - Rate quoted is deemed to be inclusive for provision of complete Racker arms as per existing design in clarifloculator mechanism including necessary Stainless steel nuts, bolts washers and welding / brazing works if any.

Supply and fixing of Stainless steel shaft (SS -304 grade) suitable for existing flash mixer with coupling & with three impeller for flash mixer shaft size 5.8 Mtr long including taking out old unserviceable one. complete all as specified and directed

Supply and fixing of SS Agitator & Impeller for alum dozer of shaft length -1.5 mtr long made of SS-304 grade suitable for existing shaft dia of alum dozer including coupling the shaft for smooth operation including taking down old unserviceable one complete all as specified and directed

Dismantling, opening, cleaning overhauling and servicing of complete reduction gearbox including replacing the unserviceable spares such as GM bush, tapper roller bearings, Ball bearings,Oil seal, Oil level indicator plug and other minor necessary spares, nuts, bolts & washers including greasing of movable parts and replacing the VG 320 graded gear oil including to transporting to workshop and bringing back after repair/replacement work all as directed by Engr - in - charge:- Note :- Spare parts such as Taper roller bearing, Bal bearing Oil seal, Gear oil and Oil level indicator shall be measured and paid seperately under relevant items of schedule 'A'.

Supply only Tapper roller ball bearing suitable for primary drive side of reduction gear of existing model at clarifloculator complete all as specified and directed

Supply only Ball Bearing suitable for existng reduction gear of secondary drive side. complete all as specified and directed

Supply only Oil seal complete all as specified and directed

Supply only Gear Oil VG 320 complete all as specified and directed

Supply only Oil level indicator complete all as specified and directed

Supply and fixing of Stainless steel shaft size of 5.8 Mtr long with three impeller (SS -304 grade) suitable for existing clarifier design including coupling it with flocculator and taking out old unserviceable one. complete all as specified and directed

M& L for preparation of surfaces on old painted surfaces of pumpsets and painting with two coat of synthetic enamel paint on pumpsets of capacity 75 HP to 100 HP in situ complete all as specified and directed

S & F in repairs of XLPE insulated and PVC armoured heavy duty electric cables with aluminium conductors 185 Sqmm 3.5 Core, 1100 volt grade in trenches/ through pipes/ ducts or on poles/wall jointing to O/H Conductor, LT panels, maint switch with suitable size aluminum lugs and testing complete all as specified & directed Note Excavation and earth work shall be measured and paid separately under respective items of Sch 'A'.

Excavation in trenches in any type of soil and not exc 1.5 m wide in depth for laying of cable/fixing poles, stays etc and getting out complete all as specified and directed

Returning, filling in including spreading leaveling, watering and excavated soil complete all as specified and directed.

Removing excavated material (Surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M & L for River washed and screened dry fine sand filling in trenches below and above/ around under ground cable for cable protection including punning around cable complete all as specified and directed

Supply and laying sub class 'B' bricks modular brick laid in trenches as cable covers complete

Supply and fixing in repairs of GI tube light grade of 15mm dia size for protection of UG cables along with pole using 25 x 5 mm thick MS FI clamps of required shape with botls, nuts, whashers complete all as specified and directed

Rajesh Traders

AGARWAL BUILDERS

Sameer Auto Engineers

Vinayak Trading House

NIDHI CONSTRUCTION