Renovation of Bhagat Singh Park Ward 11 MC Palwal.

Amount

`Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. `

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Air Swing : Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational

Rowing Machine:- Providing, designing and fixing Rowing Machine of size 1280 X 800 X 1500 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment.

EARTH WORK IN FILLING (Excluding GST) Include all Leads and Carriage

-10Watt LED Mirror Light (Without GST)

12W LED Surface Mounted Down Light (Without GST)

Supply, installation testing and commissioning of submersible pumping set complete in ss suitable to operate on 410 volts 3 phase 50 HZ A.C. power supply, Motor efficiency IE 3 including water proof joint free flat submersible cooper cable,of 6 sqmm including earthing connection motor control panel complete in all respect as per details given below : (For Borewell) (Without GST)

Supply, erection, testing and commissioning of an outdoor Bollar Light having 25W,die cast aluminum housing in pure polyster UV resistant powder with top opening die cast- cover,anti -corrosive stainless steel screws and silicon casket,HET PMMA diffuser, IP 65 protection.Drive duly wired up to terminal block confirms to IS 10322 PART5/Sec1:1987.The fixture will be as specified in this document under the relevant chapter. The fixture should be as approved with 25 Watt LED lamp along with driver.(without GST)

Circular swing: Providing a Circular Swing of length 7ft made of main A type support frame of pipe 65mm OD MS pipe Apollo make with, top pipe of 65mm dia Apollo make welded to a 25mm thick bright bar solid rod to hang the circular swing of main round pipe made frame 32mm OD Pipe Apollo make consisting of MS seating seats made of rectangular tubular pipe to give proper comfort to the user, given final touch by bright colours by powder coating finish. (Without GST)

Monkey Bar Climber : Supply of monkey bar climber. Main frame structure of size 2ft and 7.5ft height. Main standing frame of pipe 60mm OD pipe and Climbing ladder pipe of 32mm OD Climbing ladder frame of 40mm OD pipe and ladder pipe of 32mm OD pipe. All the welding joints of pipe are robotic welded with joints scalloped as neccessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, with Powder Coating of desired color and shade for proper finishing and attractive looks. (Without GST)

A Type Swing : Supply of double swing set, size 10x3x8 ft. Main cross bar 50mm round pipe and 50mm MS Pipe for legs, four numbers of 8mm mild steel chains with Rubber flexible belt type seats. All the welding joints of the pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, with Powder Coating of desired color and shade for proper finishing and attractive looks (Without GST)

4 mm Acrylic Letter with Samsung Module Light 305 SS Golden Letter with fitting and Transport Per letter (Width of letter= 12 inch and height of Letter= 18 inch)

Bidder Name

Amount

Achint Goyal (GSTN-NA) BID ID -1260744

Vinod kumar (GSTN-NA) BID ID -1260775

THE DAYA COOP L AND C SOCIETY LTD (GSTN-NA) BID ID -1260640

THE ALAWALPUR COOPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED (GSTN-06AAKAT1727E1ZL) BID ID -1260664

THE RIYANSH CO-ORPRATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED PALWAL (GSTN-NA) BID ID -1260864

Vinod kumar (BID ID -1260775)

THE DAYA COOP L AND C SOCIETY LTD (BID ID -1260640)

THE ALAWALPUR COOPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED (BID ID -1260664)

Achint Goyal (BID ID -1260744)

THE RIYANSH CO-ORPRATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED PALWAL (BID ID -1260864)

Achint Goyal (BID ID -1260744)

THE DAYA COOP L AND C SOCIETY LTD (BID ID -1260640)

THE ALAWALPUR COOPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED (BID ID -1260664)