REPAIR TO DOORS WINDOWS CUP BOARD AND OTHER JOINERIES IN CERTAIN MARRIED ACCN AND CERTAIN EM WORKS UNDER GE I GOS

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm) , complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , complete all as specified and directed.

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board edium density, wood particle board with commercial face veneers: supplied and fitted , complete all as specified and directed.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats® , complete all as specified and directed.

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100 mm long aluminium handles cast type, anodized complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 100 mm long aluminium anodized handles fabricated type complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed

S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

S&F in repairs 15 mm dia Curtain rods, mild steel, chromium plated with fixing brackets complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper, complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for Removing Demolished material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for Cleaning the concerned RCC surface by means of wire brush to expose the concrete surface which should be free from all loose particles, dust, laitance, etc complete all as specified and directed.

M&L for Making corner fillets with Polymer modified cementitious (PMC) mortar (PMC:C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar complete all as specified and directed.

M&L for the joints of pipes and concrete/masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5mm above surface level all along the periphery of PVC pipes complete all as specified and directed.

M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the RCC slab surface and carried upto finished floor level on vertical portion (walls) complete all as specified and directed. (Note : This coat is allowed to get dry for 4-6 hours.)

M&L for application of one coat of Acrylic Polymer Modified Cementitious topping rendering (APMC:C:M :: 1:2:2) 1-1.5mm thick over the first coat Acrylic Polymer Modified Cementitious complete all as specified and directed. (Note : This coat is cured for 48 hours.)

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth using extra cement incl Integral Waterproofing Compound (0.2 % or 100 ml per bag of cement) complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded brick coarse aggregate as in sunken floors etc all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore with access door complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) Floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F in repairs PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.

S&F in repirs PVC (SWR) 'S' trap for 110 mm dia etc complete all as specified and directed.

S&F in repairs door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 2 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 4 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed

M&L At points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using with bleaching powder @ 0.50 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed.Note:- All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will be issued to contractor through gate pass as schedule of credit against after completion of the work, complete all as specified and directed.

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

M&L for one light point controlled by one switch and point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC Conduit 20/25 mm dia medium grade(MMS) at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting modular MS box made out of 1.60mm thick suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed.

M&L for one light point controlled by on switch and point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC casing caping 20/25 mm dia medium grade(MMS) at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. flush mounting modular MS box made out of 1.60mm thick suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked and including removing old unserviceable item complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, and including removing old unserviceable item complete all as specified and directed.

M & L for sub main wiring with approved colour coding as per IS complete with 2 run of 1.5 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRLSH type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc at concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper cable 1100 volts grade, ISI marked,FRLSH type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring with approved colour coding as per IS complete with 2 run of 1.5 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRLSH type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through and including rigid PVC casing capig ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc at surface in wall/roofs/floors and including one run of 1.5 sqmm single core copper cable 1100 volts grade, ISI marked,FRLSH type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.0 sqmm and including electric connection from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.5 sqmm and including electric connection from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for electrical wire,LAN,telephone and TV connections cables including cutting,chasses and laying in trenches as per site requirement and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Supply and fix LED wall mounted secruity light fitting of capacity 20 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-415-20-57-SL-LM-NBK/ HPL Code No.HPLLEDSL2060AES or equivalent make in Havells / Philips as approved by GE.

Supply and fix LED wall mounted secruity light fitting of capacity 25 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells cat No.ENDURASUNDOWNSL25WLED765PASYBOPC/ Crompton cat ref No.TRP-415-25-57-SL-LM-NBK/HPL CAT NO.HPLLEDSL2560AE or equivalent make in Philips as approved by GE.

Supply and fix LED wall mounted secruity light fitting of capacity 30 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-415-30-57-SL-LM-NBK /HPL Cat NO.HPLLEDSL3060AE /Havells cat No.ENDURASUNDOWNSL30WLED757PASYBOPC or equivalent make in Philips as approved by GE.

Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Make:- Crompton cat ref No.LSTS-40-CDL-M/Havells cat No.ENDURASUNDOWNSL40WLED765PASYBOPC/HPL Cat No.HPLLEDSL4060AE or equivalent make in Philips as approved by GE.

Supply and fix LED secruity light fitting of capacity 45 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Make:- Crompton cat ref No.CRP-409-45-57-SL-GL-NSG //Havells Cat No.ENDURASUNDOWNSL45WLED765PASYBOPC/HPL Cat No.HPLLEDSL4560AE or equivalent make in Philips as approved by GE.

Supply and fix LED secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.CRP-409-60-57-SL-GL-NSG/Havells Cat No.ENDURASUNDOWNSL60WLED765PASYBOTG/HPL Cat No.HPLLEDSL6060AE or equivalent make in Philips as approved by GE.

Supply and fix LED secruity light fitting of capacity 70/72 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-409-70-57-SL-GL-NSG/Havells Cat No.ENDURASUNDOWNSL70WLED765PASYBOTG/HPL Cat No.HPLLEDSL7260AE or equivalent make in Philips as approved by GE.

Supply and fix LED secruity light fitting of capacity 90 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection with 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.TRP-411-90-57-SL-GL-NSG/Havells Cat No.ENDURASUNDOWNSL90WLED765PASYBOTG/HPL Cat No.HPLLEDSL90CLGLAWS or equivalent make in Philips as approved by GE.

Supply and fix 10/12watts LED bollard light fittings with made in die cost aluminium spigot complete fitiing,robust design and efficiency 360 degree lighting distribution,twister type ,IP65 protection and providing suitable fixing arrangements such as necessary civil work, nuts,bolts and washers grouting in PCC foundation and incl removing old unsv item complete all as spfd and directed.Make:-Crompton Cat No.LBLTW-10-CDL/Havells cat No.BAMBOOBLS8WLED830PSYMTOPC/HPL Cat No.HPLLEDBPR12W or equivalent in Philps as approved by GE.

Supply and fixed flexible LED strips trica AC LED tricolor strip light, 20/24 watt 6000k ,240Volts,IP-65 standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing on pole,wall surface,steel structures etc as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make :-Havells code:-FLEXISTRIPTRICAROPE 120D 18 MSTRIPIP65/HPLFMRL60L10WPMTR or equivalent in Crompton/Philips as approved by GE.

Supply and fixed flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing as per site requirement and removing old unserviceable fitting complete all as specified and directed.Make :-Havells code:-FLEXISTRIP5MIP2024V/1ALED830MODV1 or equivalent in HPL/Crompton/Philips as approved by GE.

Supply and fixed 100W, LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:-Havells Cat NO.PARABELLOHBP80WLED857 PBOTG /HPL Cat No.HPLLEDFL10060FE/Crompton cat No.TFS-504-100-57-NL-GL-NSG or equivalent in Philips as approved by GE.

Supply and fixed 80/90W, LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:-Havells Cat NO.FLAREULTIMACA80WLED 757PWBLTG /HPL Cat No.HPLLEDFL90CWBSHLM/Crompton cat No.LFL-80-CDL/60-HPM or equivalent in Philips as approved by GE.

Supply and fixed 70/72W LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:-Havells Cat NO.JETALEGANZAFLS70W LED757P60DTOTG /HPL Cat No.HPLLEDFL72CWBSHLM/Crompton cat No.LFL-70-CDL/60-HPM or equivalent in Philips as approved by GE.

Supply and fixed 60W, LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. Make:-Havells Cat NO.JETALEGANAFLS60WLED 757P60DTPTG /HPL Cat No.HPLLEDFL60CWBSHLM/Crompton cat No.CFS-504-60-57-60D-SL-GL-NSG or equivalent in Philips as approved by GE.

Supply and fixed 50W, LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:-Havells Cat NO.JETALEGANAFLS50WLED 757P60DTPTG /HPL Cat No.HPLLEDFL50CWBSHLM/Crompton cat No.CFS-504-50-57-60D-SL-GL-NSG or equivalent in Philips as approved by GE.

Supply and fixed 30W, LED floof light light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 6 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:-Havells Cat NO.JETALEGANAFLS30WLED 757P60DTPTG /HPL Cat No.HPLLEDFL30CWBSHLM/Crompton cat No.CFS-504-30-57-60D-SL-GL-NSG or equivalent in Philips as approved by GE.

Supply and fix 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton Cat Ref:LPTH-20-CDL or equivalent in Havells / Bajaj /Philips as approved by GE.

Supply and fix 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Crompton Cat Ref:LPTO-40-CDL-M or equivalent in Havells / Bajaj /Philips as approved by GE.

Supply and fix 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:RUBYPT40WLED757PSYMTOPC/HPL Cat No.HPLLEDCLR440WCW or equivalent in Crompton / Bajaj /Philips as approved by GE.

Supply and fix 70 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:TYCOONPT70WLED757PSYMTOPC or equivalet in Philips as approved by GE.

Supply and fix 70 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:BARONPT70WLED757PSYMTOPC or equivalet in Philips as approved by GE.

Supply and fix 35 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:VICORIAPT35WLED757PSYMTOTG or equivalet in Philips as approved by GE.

Supply and fix 45 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:RINKPT45WLED757PSYMTOPC or equivalet in Philips as approved by GE.

Supply and fix 25 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-Havells Cat Ref:RUBYMINIPT25WLED830PSYMTOPC/HPL Cat No.HPLLEDPCR25W/Crompton cat No.CBP-610-25-57-SL-CA-NBK or equivalet in Philips as approved by GE.

Supply and fix 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-HPL Cat No.HPLLEDPCR20W/Crompton cat No.LPTH-20-CDL or equivalet in Philips as approved by GE.

Supply and fix 15 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed. Make :-HPL Cat No.HPLLEDPCR15W/Havells cat No.RUBYMINIPT15WLED830PSYMTOPC or equivalet in Philips as approved by GE.

Supply and fixing 70 watts highbay down lights environmental friendly,energy saving long life corrosion resistant,vertical surface mounting pressure die-cast aluminium housig(light engine) well glass luminaires with high power LEDs aslight sources and IP65 protectio and including removing old unserviceable item complete all as specified and directed. Make :-Havells cat No.ENDURAWELLGLASSGENXP70WLED757PPC or equivalet in Crompton cat No.LWV12-70(CDL) Philips as approved by GE.

Supply and fix GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item, complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply and fixed metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed metal/PVC flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed metal/PVC flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed metal/PVC flush box 6 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed metal/PVC flush box 8 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 1 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 2 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 4 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 6 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed modular white cover plate with frame 8 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixed switch piano type, 6 Amps, flush mounted,1 way, 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixed modular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft /loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Material and labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) for making good of road cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:3:6 type C2 using (40 mm graded stone aggregate) for making good of road cutting portion mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making foundation/base plinth and pole coping, foundation etc including necessary use and waste of form work complete all as specified and directed.

Demolition of bricks or stone/boulders masonry built in cement motor including all quoins,arches,pillars etc complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls or concrete and applying two coats of oil bounded distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surface of wall and apply two coats of white wash complete all as specified and directed

M&L for applying two coats of oil bound distember on wall or concrete over a coat of primer on prepared surfaces including,rubbing with sand paper after complete removal of existing treatment , complete all as specified and directed.

M/s Ats Electricals

HARAGOURI SUPPLIERS

M/s MAA BHAIRABI ENTERPRISES

R K Traders