CONSTRUCTION OF 720 BEDDED Dr. BHIM RAO AMBEDKAR SC/ST RESIDENTIAL SCHOOL (10+2) AT Kurhani, DISTT - Muzaffarpur For the Year 2026-27 (Including Electrification).

BILL OF QUANTITY

BUILDING DIVISION, MUZAFFARPUR

PROJECT: CONSTRUCTION OF 720 BEDDED Dr. BHIM RAO AMBEDKAR SC/ST RESIDENTIAL SCHOOL (10+2) AT Kurhani, DISTT - Muzaffarpur For the Year 2026-27 (Including Electrification).

ESTIMATED COST:- ₹ 575,575,976.00 BOQ ISSUED TO:-

EARNEST MONEY:- 67,55,800.00 ADDRESS:-

COST OF BOQ:- 10,000.00 REG. NO.:-

TIME OF COMPLETION:- 18 Months SIGNATURE OF ISSUING OF:-

DATE OF TENDER:-

SL no SOR Item of work Quantity Unit Rate Amount. School Building Boy's Hostel Boy's PHE GIRLS's Hostel Girl's PHE B WALL Prin. Cum Teachr.Qtr Prin. Cum Teachr PHE Staff Qtrs Staff Qtrs PHE B WALL Campus & Pathway Landscape & Horticulture External PHE Recharge Pit Desilting Chamber Septic Tank 5 Septic Tank 1 Septic Tank 1 No Under G Water Tank Ferniture Fire Fighting School Building Boy's Hostel Boy's PHE Girl's Hostel Girl's PHE B WALL Prin. Cum Teachr.Qtr Prin. Cum Teachr PHE Staff Qtrs Staff Qtrs PHE B WALL Campus & Pathway Landscape & Horticulture External PHE Recharge Pit Desilting Chamber Septic Tank 8 Septic Tank 1 Septic Tank 1 No Under G Water Tank Ferniture Fire Fighting 1 2 3 4 5 Total

1 2.6 Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m ; disposed earth to be levelled and neatly dressed. 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0 0 0 0 0 0

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth : consolidating each deposited layer by ramming and watering lead. 5661.97 cum Rs. 123.90 Rs. 701517.85 701518.00 1080.00 1503.00 0.00 1503.00 0.00 113.4986109 527.44 0.00 167.00 0.00 602.0283132 0 0.00 0 80 15 0 0 0 71.000 0 5661.97 133812.00 186221.70 0.00 186221.70 0.00 14062.48 65349.96 0.00 20691.30 0.00 74591.308 0 0.00 0 9912 1859 0 0 0 8796.900 0 0 701517.85 -0.15 0 0 0 0 0 0

6 2.25(A) Supplying and stacking of good earth at site including royalty but excluding carriage (earth measusred in stacks will be reduced by 20% for payment). 0.00 cum Rs. 411.70 Rs. 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0.00 0 0 0 0 0 0

7 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

8 4.12 Extra for Providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufactures. 1406.15 per 50 kg cement Rs. 57.16 Rs. 80375.53 80376.00 309.15 335.00 0.00 335.00 0.00 244.00 0.00 61.00 0.00 0 0.00 0 0 0 0 0 0 122.000 0 1406.15 17671.01 19148.60 0.00 19148.60 0.00 0.00 13947.04 0.00 3486.76 0.00 0 0 0.00 0 0 0 0 0 0 6973.520 0 0 80375.53 -0.47 0 0 0 0 0 0

18 5.22 Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0 0 0 0

5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concretework; using coarse aggregateand fine aggregatederived fromnatural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS9103 to accelerateretard setting of concrete, to improve durability and work ability without impairingstrength; including pumping of concrete tositeof laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcementasperdirectionof theengineer-in-charge; for thefollowing grades of concrete 0.00 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

22 5.33a.1 roviding and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength andadmixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement, durability as per direction of Engineer-incharge. 25.78 cum 4756.90 Rs. 122632.88 122633.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 24 0.75 0.61 0.000 0 25.78 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 116163 3568 2901.709 0.000 0 0 122632.88 -0.12 0 0 0 0 0 0

26 9.21 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

27 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk 583.96 sqm Rs. 3866.50 2257878.63 2257879.00 48.93 161.98 161.98 178.07 33.00 0 583.96 189192.87 626295.67 626295.67 0.00 688499.92 127594.50 2257878.63 -0.37 0 0 0 0 0 0

28 26.86.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). 1973.28 mtr Rs. 768.10 1515672.53 1515673.00 168.98 566.55 566.55 552.20 119.00 0 1973.28 129789.70 435167.06 435167.06 0.00 424144.82 91403.90 1515672.53 -0.47 0 0 0 0 0 0

29 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

30 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

31 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

32 9.1 Providing and fixing aluminium hanging floor door stopper anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

33 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to I.S. 2202 (part I). 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0 0 0 0

33 9.40 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs, and priming coat on unexposed surface etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

35 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). 190.00 mtr Rs. 1462.70 Rs. 277913.00 277913.00 32.00 79.00 0.00 79.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 190.00 46806.40 115553.30 0.00 115553.30 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 277913.00 0.00 0 0 0 0 0 0

36 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/ m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-incharge (panneling to be paid for separately). 81.15 sqm Rs. 6445.00 Rs. 523011.75 523012.00 15.00 33.08 0.00 33.08 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 81.15 96675.00 213168.38 0.00 213168.38 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 523011.75 -0.25 0 0 0 0 0 0

37 9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc.,with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

38 9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 1445.07 sqm Rs. 9083.30 Rs. 13126036.12 13126036.00 231.05 444.15 0.00 444.15 0.00 248.72 0.00 77.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1445.07 2098719.17 4034347.70 0.00 4034347.70 0.00 0.00 2259207.46 0.00 699414.10 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 13126036.12 0.12 0 0 0 0 0 0

39 10.15 Providing and fixing pressed steel door frame confirming IS code 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

40 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 1247.00 each Rs. 165.40 Rs. 206253.80 206254.00 174.00 460.00 0.00 460.00 0.00 89.00 0.00 64.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1247.00 28779.60 76084.00 0.00 76084.00 0.00 0.00 14720.60 0.00 10585.60 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 206253.80 -0.20 0 0 0 0 0 0

41 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 17556.60 kg. 546.80 9599946.32 9599946.00 6219.36 6219.36 5117.88 0 17556.60 0.00 3400746.05 3400746.05 0.00 2798454.22 9599946.32 0.32 0 0 0 0 0 0

42 10.32 Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

43 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

44 10.33 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

45 10.29 Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms.to side hung steel windows with necessary welding and machine screws etc. complete. 0.00 each Rs. 182.70 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

46 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 389.90 sqm Rs. 6303.40 Rs. 2457700.70 2457701.00 3.78 193.06 0.00 193.06 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 389.90 23826.85 1216936.93 0.00 1216936.93 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 2457700.70 -0.30 0 0 0 0 0 0

47 10.13 Extra for providing and fixing steel beading of approved shape and section with screws instead of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

48 21.1 Providing and fixing anodised aluminium work for doors, windows, ventilator? and partitions with extruded built up standard tubular and otner sections of approved make conforming to IS : 733 and IS : 1285,anodised trasparent or dyed to required shade according to IS : 1868, (Minimum anodic coating of grade AC 15), fixed with.rawl plugs and screws or with fixing clips , or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust fre straight, mitred and jointed mechanically wherever required including cleat angle,. Aluminium snap beading tor glazing / paneling, C.P. brass/stainless steel screws, all complete as per architecttural drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately.) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

49 21.1.2 For shutters of doors, windows & ventilators including providng and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separtately.) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

50 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

51 21.4 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good the same matching to the existing floor finishing and cover plate with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

52 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

53 21.13 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1.00 each Rs. 365.20 Rs. 365.20 365.00 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1.00 365.20 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 365.20 0.20 0 0 0 0 0 0

55 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) / 1:4 (1 cemnt : 4 coarse sand) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

56 11.27 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 65.24 Sqm Rs. 1334.90 Rs. 87085.00 87085.00 56.34 0.00 0.00 0.00 8.90 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 65.24 75209.07 0.00 0.00 0.00 0.00 0.00 11875.94 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 87085.00 0.00 0 0 0 0 0 0

57 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete 1564.48 Sqm Rs. 686.80 Rs. 1074486.88 1074487.00 137.03 485.84 0.00 485.84 0.00 455.78 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1564.48 94108.77 333672.58 0.00 333672.58 0.00 0.00 313032.95 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 1074486.88 -0.12 0 0 0 0 0 0

58 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 5790.49 sqm Rs. 795.00 Rs. 4603437.38 4603437.00 565.42 1815.43 0.00 1815.43 0.00 1433.20 0.00 161.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 5790.49 449512.88 1443266.06 0.00 1443266.06 0.00 0.00 1139397.39 0.00 127995.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 4603437.38 0.38 0 0 0 0 0 0

59 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

60 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

61 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:1:1 (1 lime : 1 surkhi : 1 coarse sand) / 1:4 (1 cemnt : 4 coarse sand) 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0 0 0 0

62 11.27 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 1328.74 Sqm Rs. 1334.90 1773735.03 1773735.00 164.09 565.41 565.41 33.83 0 1328.74 219043.74 754767.14 754767.14 0.00 0.00 45157.00 1773735.03 0.03 0 0 0 0 0 0

65 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour and shade,Area of slab over 0.50 sqm 512.96 sqm Rs. 4401.20 Rs. 2257619.15 2257619.00 19.24 0.00 19.24 0.00 461.28 0.00 13.20 0.00 0 0.00 0 0 0 0 0 0 0.000 0 512.96 0.00 84679.09 0.00 84679.09 0.00 0.00 2030165.13 0.00 58095.84 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 2257619.15 0.15 0 0 0 0 0 0

66 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to Granite work 486.45 mtr 260.10 126525.65 126526.00 0.00 486.45 0 486.45 0.00 126525.65 126525.65 -0.35 0 0 0 0 0 0

67 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 20.00 Sqm Rs. 862.40 Rs. 17248.00 17248.00 0.00 0.00 0.00 0.00 20.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 20.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 17248.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 17248.00 0.00 0 0 0 0 0 0

68 11.3 Cement concrete flooring 1:2:4 (1cement : 2 coarse : sand 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

69 11.6 Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

b 13.18 15mm cement plaster 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall 74.00 sqm Rs. 229.30 Rs. 16968.20 16968.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 74.000 0 74.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 16968.200 0 0 16968.20 0.20 0 0 0 0 0 0

73 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 57499.10 sqm Rs. 105.40 Rs. 6060405.16 6060405.00 6885.30 18925.48 0.00 18925.48 0.00 10978.15 0.00 1784.69 0.00 0 0.00 0 0 0 0 0 0 0.000 0 57499.10 725710.71 1994745.51 0.00 1994745.51 0.00 0.00 1157097.11 0.00 188106.33 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 6060405.16 0.16 0 0 0 0 0 0

a 13.81.1+13.82.2 With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) Painting with ready mixed pain to approved brand and manufacture in all shades to give an even shade 2859.51 sqm Rs. 123.20 Rs. 352291.21 352291.00 1256.67 0.00 1256.67 0.00 188.16 0.00 158.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 2859.51 0.00 154821.89 0.00 154821.89 0.00 0.00 23181.83 0.00 19465.60 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 352291.21 0.21 0 0 0 0 0 0

b 13.81.3+13.82.1 With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works, Paintingwithreadymixedpaintofapprovedbrandandmanufacture in all shades to give an even shade 1731.86 sqm Rs. 118.10 Rs. 204533.17 204533.00 738.14 0.00 738.14 0.00 255.58 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1731.86 0.00 87174.54 0.00 87174.54 0.00 0.00 30184.09 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 204533.17 0.17 0 0 0 0 0 0

c 13.81.1 With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works, Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade 780.20 sqm Rs. 39.70 Rs. 30973.91 30974.00 524.62 0.00 0.00 0.00 255.58 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 780.20 20827.35 0.00 0.00 0.00 0.00 0.00 10146.56 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 30973.91 -0.09 0 0 0 0 0 0

d 13.81.3 With ready mixed red oxide zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 252.00 sqm Rs. 34.60 Rs. 8719.20 8719.00 0.00 252.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 252.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 8719.20 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 8719.20 0.20 0 0 0 0 0 0

77 13.116 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 5213.06 Metre Rs. 47.10 Rs. 245535.13 245535.00 488.10 1554.80 0.00 1554.80 0.00 326.36 0.00 1289.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 5213.06 22989.51 73231.08 0.00 73231.08 0.00 0.00 15371.56 0.00 60711.90 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 245535.13 0.13 0 0 0 0 0 0

81 13.77A Distempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

82 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed protions of W.C. kitchen and the like consisting of : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

83 22.8 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

a) Applying and grouting slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with proprietary water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1cement : 5 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1cement : 4 coarse sand) admixed with proprietary water proofing compound conforming to IS:2645 and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

84 2.28+ 11.72 + 4.1.6 + 13.11.4 + Derive Providing plinth protection 750 mm wide consisting of 12 mm thick cement plaster 1;6 with neat cement punning over 75 mm thick P.C.C. (1:3 :6) over brick flat soling over 75 mm thick local sand filling all complete 529.31 Sqm Rs. 744.40 Rs. 394017.40 394017.00 122.03 146.00 0.00 146.00 0.00 79.28 0.00 36.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 529.31 90835.41 108682.40 0.00 108682.40 0.00 0.00 59018.79 0.00 26798.40 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 394017.40 0.40 0 0 0 0 0 0

85 2.37 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

2.37.2 Along the external wall below concrete or masonary apron using chemical emulsion @ 2.55 litres per linear metre including drilling and plugging holes etc. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

86 2.37.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand ) to match the existing floor. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

87 11.76 Derived Providing well burnt brick bats or Jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1:10) all complete as per building specification and direction of E/I. 46.49 cum Rs. 3466.96 Rs. 161161.64 161162.00 37.49 0.00 0.00 0.00 0.00 6.00 0.00 0 0.00 0 0 3.00 0 0 0 0.000 0 46.49 129959.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 20801.76 0.00 0 0 0.00 0 0 10401 0 0 0 0.000 0 0 161161.64 -0.36 0 0 0 0 0 0

88 12.5 Derived Providing well burnt brick bats or Jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1:10) all complete as per building specification and direction of E/I. 567.00 cum 3466.96 1965766.32 1965766.00 191.00 191.00 185.00 0 567.00 0.00 662189.36 662189.36 0.00 641387.60 0.000 1965766.32 0.32 0 0 0 0 0 0

9.166.1 Providing and fixing 18mm thick both sides Pre-Laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thick 966.60 cum 1085.80 1049529.67 1049530.00 0.00 966.60 0 966.60 0.00 1049529.67 0.000 1049529.67 -0.33 0 0 0 0 0 0

9.167.1 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. 335.17 cum 778.40 260896.33 260896.00 0.00 335.17 0 335.17 0.00 260896.33 0.000 260896.33 0.33 0 0 0 0 0 0

9.171 Providing and fixing stainless steel soft closing spring hinges at O degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws ncluding making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 748.00 each 220.40 164859.20 164859.00 0.00 748.00 0 748.00 0.00 164859.20 0.000 164859.20 0.20 0 0 0 0 0 0

9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge 352.00 each 749.70 263894.40 263894.00 0.00 352.00 0 352.00 0.00 263894.40 0.000 263894.40 0.40 0 0 0 0 0 0

9.173 Providing and fixing readymade 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings all complete 440.00 kg 371.80 163592.00 163592.00 0.00 440.00 0 440.00 0.00 163592.00 0.000 163592.00 0.00 0 0 0 0 0 0

9.170.1 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.200mm 440.00 each 150.20 66088.00 66088.00 0.00 440.00 0 440.00 0.00 66088.00 0.000 66088.00 0.00 0 0 0 0 0 0

89 17.1.1 Providing and fixing white vitreous china water closet squatting pan (Indian type WC pan) with 100mm sand cast Iron P or S Trap, 10 litre low level PVC flushing cistern (of approved make) with fittings CI/MS brackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

90 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

91 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

92 17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

94 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 221.00 each Rs. 1068.50 236138.50 236139.00 27.00 0.00 61.00 0.00 81.00 44.00 0.00 8.00 0 0.00 0 0 0 0 0 0 0.000 0 221.00 28849.50 0.00 65178.50 0.00 86548.50 0.00 0.00 47014.00 0.00 8548.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 236138.50 -0.50 0 0 0 0 0 0

17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 221.00 each Rs. 325.10 Rs. 71847.10 71847.00 27.00 0.00 61.00 0.00 81.00 44.00 0.00 8.00 0 0.00 0 0 0 0 0 0 0.000 0 221.00 8777.70 0.00 19831.10 0.00 26333.10 0.00 0.00 14304.40 0.00 2600.80 0 0 0.00 0 0 0 0 0 0 0.000 0 0 71847.10 0.10 0 0 0 0 0 0

96 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 31.00 each Rs. 325.10 Rs. 10078.10 10078.00 25.00 0.00 6.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 31.00 8127.50 0.00 1950.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 10078.10 0.10 0 0 0 0 0 0

97 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 67.00 each Rs. 146.30 Rs. 9802.10 9802.00 4.00 0.00 61.00 0.00 2.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 67.00 585.20 0.00 8924.30 0.00 292.60 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 9802.10 0.10 0 0 0 0 0 0

98 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 17.00 each Rs. 204.70 Rs. 3479.90 3480.00 4.00 0.00 11.00 0.00 2.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 17.00 818.80 0.00 2251.70 0.00 409.40 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 3479.90 -0.10 0 0 0 0 0 0

99 17.80 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 69.00 each Rs. 6534.20 Rs. 450859.80 450860.00 25.00 0.00 44.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 69.00 163355.00 0.00 287504.80 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 450859.80 -0.20 0 0 0 0 0 0

100 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

103 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

105 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge. 32.00 Each Rs. 299.40 Rs. 9580.80 9581.00 2.00 0.00 0.00 0.00 8.00 22.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 32.00 598.80 0.00 0.00 0.00 2395.20 0.00 0.00 6586.80 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 9580.80 -0.20 0 0 0 0 0 0

106 AR Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required. 0.00 Each Rs. 95000.00 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

107 18.48 PVC water tank Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 90000.00 per L Rs. 9.70 Rs. 873000.00 873000.00 10000.00 0.00 30000.00 0.00 30000.00 10000.00 0.00 10000.00 0 0.00 0 0 0 0 0 0 0.000 0 90000.00 97000.00 0.00 291000.00 0.00 291000.00 0.00 0.00 97000.00 0.00 97000.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 873000.00 0.00 0 0 0 0 0 0

110 17.37 Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

111 17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

114 17.43 Providing and fixing single equal plain junction of required degree with acesses door, insersion rubber washer 3mm thick, bolts and nuts complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

121 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

122 17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

124 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

125 12.79 Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

126 12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

127 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. 70.00 Each Rs. 189.40 Rs. 13258.00 13258.00 10.00 0.00 32.00 0.00 21.00 5.00 0.00 2.00 0 0.00 0 0 0 0 0 0 0.000 0 70.00 1894.00 0.00 6060.80 0.00 3977.40 0.00 0.00 947.00 0.00 378.80 0 0 0.00 0 0 0 0 0 0 0.000 0 0 13258.00 0.00 0 0 0 0 0 0

129 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

131 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

133 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

134 15 Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

136 N.S Providing and fixing brass Single acting air valve PN 1.6 of approved quality with bolts, nuts, rubber insertion, tail pieces, tapers etc. if required as complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

137 N.S Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

138 17.7 Providing and fixing wash basin with C.I. / M.S. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

140 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

141 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

142 18.22 Providing and fixing N.P./C.P. brass/ P.V.C. porcelain shower rose of 15 mm inlet etc. all complete as per specification and direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

143 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

146 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

147 2.8.1 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.. All Kinds of soil 1032.24 Cum Rs. 360.70 Rs. 372328.34 372328.00 0.00 0.00 0.00 0.00 0.00 158.030375 0.00 0.00 0.00 840.077875 0 34.13 0 0 0 0 0 0 0.000 0 1032.24 0.00 0.00 0.00 0.00 0.00 57001.56 0.00 0.00 0.00 0.00 303016.0895 0 12310.69 0 0 0 0 0 0 0.000 0 0 372328.34 0.34 0 0 0 0 0 0

148 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2coarse sand:4 graded stone aggregate 20 mm nominal size) 24.59 Cum Rs. 3998.10 Rs. 98313.28 98313.00 0.00 0.00 0.00 0.00 0.00 4.836 0.00 0.00 0.00 0.00 0 0 0 18.74 0.56 0.45 0.000 0 24.59 0.00 0.00 0.00 0.00 0.00 19334.81 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 74940 2239 1799.145 0.000 0 0 98313.28 0.28 0 0 0 0 0 0

149 6.1.12C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand )Extra tor Brick work in superstructure above plinth level upto floor V cum 0.00 Cum Rs. 5958.50 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

150 5.33.2.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including reta. 0.00 Cum Rs. 5863.20 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

152 13.78.1+13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 0.00 Sqm Rs. 119.80 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

153 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

b 16.18.1 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used., Fensing with GI Barbed wire 0.00 Metre Rs. 15.80 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

c 16.19 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. 0.00 kg Rs. 94.80 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

155 3.20 Case I RCD-21 Compacting original ground Compacting original ground supporting subgrade (Loosening of the ground upto a level of 500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300-2 for subgrade construction) 0.00 Cum Rs. 74.30 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

156 3.18 RCD-21 Construction of subgrade and Earthen Shoulder (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) 0.00 Cum Rs. 223.20 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

157 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 1784.65 Sqm Rs. 444.80 Rs. 793813.21 793813.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1785 0.00 0 0 0 0 0 0 0.000 0 1784.65 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 793813 0.00 0 0 0 0 0 0 0.000 0 0 793813.21 0.21 0 0 0 0 0 0

158 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 0.00 cum Rs. 4649.00 Rs. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

159 2.25(A) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

161 2.34 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

162 2.32 Clearing jungle including uprooting or rank vegetation, grass, brush wood, trees and scaplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 10453.97 100 sqm Rs. 697.40 Rs. 72905.96 72906.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 10453.97 0 0 0 0 0 0 0.000 0 10453.97 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 72905.96 0 0 0 0 0 0 0.000 0 0 72905.96 -0.04 0 0 0 0 0 0

163 23.1 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of / and manure before and after flooring trench with water (excluding cost of imported earth, sludge or manure) 1568.09 sqm Rs. 44.70 Rs. 70093.84 70094.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 1568.09 0 0 0 0 0 0 0.000 0 1568.09 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 70093.84 0 0 0 0 0 0 0.000 0 0 70093.84 -0.16 0 0 0 0 0 0

164 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20 % for payment) 6590.66 cum Rs. 143.50 Rs. 945760.00 945760.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6332 259.00 0 0 0 0 0 0 0.000 0 6590.66 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 908593 37166.50 0 0 0 0 0 0 0.000 0 0 945760.00 -0.00 0 0 0 0 0 0

165 23.4 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

c 23.8 Spreading of sludge, dump manutre or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately) 315.00 cum Rs. 30.10 Rs. 9481.50 9482.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 315.00 0 0 0 0 0 0 0.000 0 315.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 9481.50 0 0 0 0 0 0 0.000 0 0 9481.50 -0.50 0 0 0 0 0 0

166 23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rought dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 10453.97 100 sqm Rs. 3418.20 Rs. 357337.47 357337.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 10453.97 0 0 0 0 0 0 0.000 0 10453.97 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 357337.47 0 0 0 0 0 0 0.000 0 0 357337.47 0.47 0 0 0 0 0 0

167 23.10 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free form weeds and fit for moving including supplying good earth if needed. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

168 23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20 % 1 part of stacked volume of manure after reduction by 8 % ) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure sludge or extra good earth if needed to be paid for separately) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

169 23.13 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8 :1 (8 parts of stacked volume of earth after reduction by 8% ) flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 67.50 cum Rs. 126.90 Rs. 8565.75 8566.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 67.50 0 0 0 0 0 0 0.000 0 67.50 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 8565.75 0 0 0 0 0 0 0.000 0 0 8565.75 -0.25 0 0 0 0 0 0

175 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

176 2.10 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

177 2.11 Extra for Excavating trenches for Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 381.54 Metre Rs. 126.20 Rs. 48150.35 48150.00 0.00 382 381.54 0.00 0.00 0.00 0.00 0.00 48150.348 48150.35 0.35 141.00 240.54 382 17794.2 30356.148 0 0 0

178 2.12 Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 3.0 m in depth but not exceeding 4.5 m.(Rate is over corresponding basic item for depth upto 1.5 Metre.)Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 30.00 Metre Rs. 316.60 Rs. 9498.00 9498.00 0.00 30 30.00 0.00 0.00 0.00 0.00 0.00 9498 9498.00 0.00 15.00 15 30 4749 4749 0 0 0

180 18.3 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

181 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

182 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

183 4.1 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 20 mm nominal size) alround stoneware/RCC pipes including in bed for pipes to be laid in trenches as per standard details. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

183 19.4 Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as/standard design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

184 19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

186 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

188 19.11 Constructing brick masonry circular type manhole 1.2 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

190 19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

192 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 270.00 Each Rs. 310.90 Rs. 83943.00 83943.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 270 0 0 0 0 0 0.000 0 270.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 83943 0 0 0 0 0 0.000 0 0 83943.00 0.00 101 94 75 270 31400.9 29224.6 0 0 23317.5

193 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0 0 0 0 0 0

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.00 Each 33603.40 336034.00 336034.00 0.00 10 10.00 0.00 0.00 336034 336034.00 0.00 10 10 336034 0 0 0 0

194 2.10 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

195 19.6 Providing, laying Non pressure NP2 class (light duty) RCC Pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

196 19.3 Providing and laying cement concrete 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 20mm nominal size) up to haunches of SW/RCC Pipes including bed concrete as/standard design: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

197 19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

198 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

200 19.11 Constructing brick masonry circular type manhole 1.2 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

202 19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

204 19.27 Constructing brick masonary road gully chamber 50x45x60cm with bricks of class designation 75 in cement morter 1:4 (1 cement : 4 coarse sand) including 500 x 450mm precast RCC horizontal grating complete as per standard design 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

206 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

207 18.59 Providing & fixing C.I. double acting air valve of approved quality with bolt, nuts, rubber insertions etc. complete. (The tail piece if required will be paid separately) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

208 18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts,nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 0.00 0.00 0.00 0.00 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0 0 0 0

209 18.33 Constructing masonry chamber 60x60x75 cms inside, in brick work in cement mortar, 1 : 4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter ,160 mm bottom diameter and 180 mm deep (inside) with chained lid and rcc top slab 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation foundation concrete 1:5:10 mix (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

210 18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

211 AR Providing, fixing, testing & commissioning of vertical multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS304 impellers with stainless steel SS304 shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900 RPM, suitable for 400/440 volts, 3 phase, 50 Hz AC supply with pressure gauge and with gunmetal isolation cocks, vibration elimination pads etc. complete with base and frame, nuts and bolts and necessary RCC foundations as per requirement as per instructions and pump shall have following duty. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Providing,fixing, Testing & Commissioning of package type skid mounted hydropneumatic system comprising of: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast iron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 volts, 3 phase, 50 Hz AC supply. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Pump mounted or panel mounted microprocessor PID controller and variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter (one dedicated to each pump) minimum two lined LCD display, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Pressure switches sensor type fitted with micro switch and having maximum pressure and differential scale should confirming BS-6134 standards and IP55 protection class. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Ball valves to be used should be Hot Pressed brass OT-58 with stainless steel ball and PTFE seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Complete set including all necessary suction and delivery valves and accessories, with the system to be skid-mounted on a common base frame and the following shall be the working duty. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Providing, fixing, testing & Commissioning of compact mono block dry motor submersible pumps for suitable rating, with non-clog free flow open impeller, minimum solid handling capacity of 14 mm suitable for operation on 415 volts + 5% -15%, 50 C/s A.C single phase supply, speed 960/1440R&M including oil chamber, guide wire for lifting & lowering of pump, M.S. galvanized lifting chain, duck foot bend with following specifications: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

a) Complete piping 100mm dia common delivery upto 5m as per enclosed tentative layout. (The pipe should be preferably CI LA/heavy duty G.I) -- 1 Set 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

e) Electrical switch panel having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near each sump as per site conditions). - 1 No. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

214 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Metre depth below ground level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

215 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 460.00 Cum Rs. 1343.20 Rs. 617872.00 617872.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 460 0 0 0 0 0 0.000 0 460.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 617872 0 0 0 0 0 0.000 0 0 617872.00 0.00 440 20 460 0 0 0 591008 26864

216 24.10 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia,conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

217 24.11 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed /plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

218 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 264.00 Hour Rs. 916.80 Rs. 242035.20 242035.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 264 0 0 0 0 0 0.000 0 264.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 242035.2 0 0 0 0 0 0.000 0 0 242035.20 0.20 264 264 0 0 0 242035 0

219 A.R Supply, installation, testing and commissioning of suitable capacity and typ of Submerssible pump set capable to discharge 20000lits. Of clean filtetred water from a 250mm 150mm deep tube well at a total head of 30m complete with control panel, 24m of suitable size G.I. Column pipe, bend, gate valve, nipple supporting,clamp,30m of neoprene cable etc copmplete as required. 1.00 Set Rs. 80000.00 Rs. 80000.00 80000.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 1 0 0 0 0 0 0.000 0 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 80000 0 0 0 0 0 0.000 0 0 80000.00 0.00 1 1 0 0 0 80000 0

220 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Metre depth below ground level. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

221 24.10 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia,conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

222 24.11 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed /plain bevel ended pipe (type A) of required dia, conforming to IS:8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

224 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

225 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

226 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 105.00 Cum Rs. 1188.90 Rs. 124834.50 124835.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 105 0 0 0 0 0 0.000 0 105.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 124834.5 0 0 0 0 0 0.000 0 0 124834.50 -0.50 105 105 0 0 0 0 124834.5

227 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 105.00 Cum Rs. 1195.60 Rs. 125538.00 125538.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 105 0 0 0 0 0 0.000 0 105.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 125538 0 0 0 0 0 0.000 0 0 125538.00 0.00 105 105 0 0 0 0 125538

228 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 105.00 Cum Rs. 1195.60 Rs. 125538.00 125538.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 105 0 0 0 0 0 0.000 0 105.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 125538 0 0 0 0 0 0.000 0 0 125538.00 0.00 105 105 0 0 0 0 125538

229 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

233 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

241 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

242 AR Workstation- Size (1200x600x1200)mm 67mm thk Sliding Tile Based Partition.Single Metal raceway cover at skirting level in Partition. Pin up & white board in partition above the tabletop. Table top made of 25mm thk Prelamin particle board with pvc edges. Pedestal of 400L x 450D x 725 HT (2 drawer + 1filling). PVC Keyboard Tray. Metal CPU Trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 6.00 Each Rs. 48961.00 Rs. 293766.00 293766.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 6 6.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 293766 0 293766.00 0.00 0 0 0 0 0 0

243 AR Mid Back Chair- (Back Height-495xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (410-470)mm. Nylon base chair with push back mechanism & Fix handle. Back & seat cover cushion chair upholstered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star Nylon base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black 13.00 Each Rs. 10760.00 Rs. 139880.00 139880.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 13 13.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 139880 0 139880.00 0.00 0 0 0 0 0 0

244 AR SLOTED ANGLE RACK * (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 15.00 Each Rs. 9682.00 Rs. 145230.00 145230.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 15 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 145230 0 145230.00 0.00 0 0 0 0 0 0

245 AR Visitor Chair Size (W)490mm X (D)470mm X (H)680mm). Multipurpose fixed cantiliver chair & armrest with pading & metal base. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. The Product Should be Certified Company BIFMA,ISO-50001, Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 139.00 Each Rs. 7820.00 Rs. 1086980.00 1086980.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 139 139.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 1086980 0 1086980.00 0.00 0 0 0 0 0 0

246 AR Office Table Size(1200x600x750)mm. Table made of 25mm thk pre lam particle board with edge banding & wire manager. Table top supported with side panel & front panel & Keyboard Tray. Pedestal Size (400x450Dx725HT)mm. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color Maple & Dark Gray. The Product should be BIFMA, Green Guard, AGSI Certified, ISO 14001, ISO 50001:2011 Certified 7.00 Each Rs. 37436.00 Rs. 262052.00 262052.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 7 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 262052 0 262052.00 0.00 0 0 0 0 0 0

247 AR Library Table-Library Table Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 3.00 Each Rs. 30654.00 Rs. 91962.00 91962.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 91962 0 91962.00 0.00 0 0 0 0 0 0

248 AR 2 Door Book Case- 2 Door File Cabinet - Size (800x381x1970)mm. 2 Door file cabinet. On the top shelf for display with two glass door. With ample storage facility. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology Color-Wenge. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 8.00 Each Rs. 28224.00 Rs. 225792.00 225792.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 8 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 225792 0 225792.00 0.00 0 0 0 0 0 0

249 AR 4 DOOR GLASS BOKK CASE .(L)838MM X (D)305MM X (H)1676MM * BOOKCASE 4 DOORS WITH CAM * BODY: 22 GAUGE * DOORS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 8.00 Each Rs. 23696.00 Rs. 189568.00 189568.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 8 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 189568 0 189568.00 0.00 0 0 0 0 0 0

250 AR White Board - White board Size 8x4- White board providing and fixing in position magnetic white board (Best Quality) on wall include teak wood edge moulding with comlete hardawre and opolishing work. 19.00 Each Rs. 14680.00 Rs. 278920.00 278920.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 19 19.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 278920 0 278920.00 0.00 0 0 0 0 0 0

251 AR Single Metal Bed ( Without Mattress) with 8 mm Ply on mattress area- Bed Size (in MM): 1981 x 977 * MATERIAL: Metal. Bed frame made upof mild steel heavy duty. The frame joints are all mig welded and grounded for better finish. The frame to be powder coated. The product should be Certified Company BIFMA, ISO - 50001, Green Guard/Green PRO, Sedex, AIOTA,IGBC,AGSI,FSC & PERC 721.00 Each Rs. 15660.00 Rs. 11290860.00 11290860.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 721 721.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 11290860 0 11290860.00 0.00 0 0 0 0 0 0

252 AR Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRUCTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 721.00 Each Rs. 6125.00 Rs. 4416125.00 4416125.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 721 721.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 4416125 0 4416125.00 0.00 0 0 0 0 0 0

253 AR Study Chair - CHAIR SIZE: 355MML X 361MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRUCTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 721.00 Each Rs. 5370.00 Rs. 3871770.00 3871770.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 721 721.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 3871770 0 3871770.00 0.00 0 0 0 0 0 0

254 AR STEEL ALMIRAH WITH 4 SHELVES (L)900MM X (D)450MM X (H)1980MM. STOREWELL WITH 4 SHELVES GAUGE: BODY: 22 GAUGE *DOORS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 15.00 Each Rs. 18424.00 Rs. 276360.00 276360.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 15 15.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 276360 0 276360.00 0.00 0 0 0 0 0 0

255 AR Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC, BIFMA,Green Gaurd,AGSI & ISO 14001,18001 Certified. 721.00 Each Rs. 4704.00 Rs. 3391584.00 3391584.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 721 721.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 3391584 0 3391584.00 0.00 0 0 0 0 0 0

256 AR Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC, BIFMA, Green Gaurd,AGSI & ISO 14001,18001 Certified 25.00 Each Rs. 22344.00 Rs. 558600.00 558600.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 25 25.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 558600 0 558600.00 0.00 0 0 0 0 0 0

257 AR Stackable Café Chair Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/ Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 241.00 Each Rs. 4704.00 Rs. 1133664.00 1133664.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 241 241.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 1133664 0 1133664.00 0.00 0 0 0 0 0 0

252 AR Free Standing Table-Size : 1800L x 900W x 750Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm.Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 4.00 Each Rs. 19580.00 Rs. 78320.00 78320.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 4 4.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 78320 0 78320.00 0.00 0 0 0 0 0 0

253 AR Cantiliver Chair - Chair Size (W)595mm X (D)510mm X (H)875mm Multi-purpose fixed chair,Metal frame.PU Padding on armrest. Cushion upholstery in leatherette with four leg metal legs with matt finish. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO 14001,18001 Certified Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC 19.00 Each Rs. 8820.00 Rs. 167580.00 167580.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 19 19.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 167580 0 167580.00 0.00 0 0 0 0 0 0

254 AR Lab Table for Bio, Chemistry/Physics - Table Size 1800x900x900mm. The Table thk should be 30mm & Table top supported with 50x50mm thk "C" legs with duly powder coated & the horizontaly metal support below the table top from leg to leg. The Product should be green guard. The Product should be PEFC,FSC, BIFMA,Green Gaurd,AGSI & ISO 14001,18001 Certified. 7.00 Each Rs. 47040.00 Rs. 329280.00 329280.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 7 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 329280 0 329280.00 0.00 0 0 0 0 0 0

255 AR Lab Stool- SEAT ASSEMBLY: The seat is made up of 1.2 cm thick Commercial Grade plywood with moulded Polyurethane foam and are upholstered with replaceable fabric covers. The upholstery is available in Leather cloth and Fabric. SEAT SIZE: Diameter 40.0 cm, ADJUSTMENTS: 360 Degree Revolving type. BACK ASSEMBLEY: The back foam is designed with contoured Lumbar support for extra comfort. The upholstery is available in Leather cloth and Fabric. BACK SIZE: 45.0 cm (W) covered with U foam. POLYURETHANE FOAM: The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness 20 +/- 2 on Hampden machine at 25% compression. HEIGHT ADJUSTMENT: The manual height adjustment is very easy 37.00 Each Rs. 8820.00 Rs. 326340.00 326340.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 37 37.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 326340 0 326340.00 0.00 0 0 0 0 0 0

256 AR Computer Lab Table - Table Size (900x600x1050)mm. The Table top thk will be 25mm PLPB board and top supported with 50X50mm "C" legs with the provision of Keyboard Tray .Metal CPU Trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/ Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 17.00 Each Rs. 17444.00 Rs. 296548.00 296548.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 17 17.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 296548 0 296548.00 0.00 0 0 0 0 0 0

257 AR 2 Seater Bench & Desk - SIZES : 1050MM L X 400MMD X 760MMHTWITHall MS Frame Material in Knockdown type,with Desk,Seat,Back in 18mm Prelam Particle Board with Metal Understructure. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/ Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. 361.00 Each Rs. 10368.00 Rs. 3742848.00 3742848.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 361 361.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 3742848 0 3742848.00 0.00 0 0 0 0 0 0

252 AR Class Room table-Size : 1200L x 900W x 740Ht.18mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm 19.00 Each Rs. 12544.00 Rs. 238336.00 238336.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 19 19.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 238336 0 238336.00 0.00 0 0 0 0 0 0

253 AR Office Table with Side Unit- Table Top Size-( 1800L x 900D x 760H)mm with 25-30 MM table top thk & Side runner size- (900L x 400D x 760H) with 25 MM thk. Straight line table with two wire manager,Mobile pedestal with 3 drawer/center lock,interchangeable side runner with 3 drawer with lock,one open shelf,one closed shutter with lock,key board trey & CPU trolley. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination 3.00 Each Rs. 48804.00 Rs. 146412.00 146412.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 146412 0 146412.00 0.00 0 0 0 0 0 0

254 AR High Back Chair with revolving. Size(Seat-510x480, Back- 660x510, Height-Min.470mm Max.540mm) Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC.EACH315680.0047,040(Handwritten notes at the bottom right corner): Rate Approved, 19/5/26If you want, tell me if you'd like to:Upload Page 6 (the final page) to complete this document set.Convert this specific page into a clean CSV layout for Excel.Have me combine pages 1 through 5 into a single master spreadsheet data block.Let me know what your next step is! 3.00 Each Rs. 15680.00 Rs. 47040.00 47040.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 47040 0 47040.00 0.00 0 0 0 0 0 0

255 AR able with side unit return- Table Size(1500x750x 750) mm with 25 mm thk top & Side runner Size(750x450x 750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFCEACH336064.001,08,192.0027MRHigh Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair upholstered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-BlackEACH314602.0043,806.0028MR3 Seater Chrome ChairLength 1775mm x Depth 690mm x Height 755mm1)Seat & back single section2)Seat is 410 mm from ground3)Perforated mild steel powder coated4)Seat thickness 1.2 mm5)Seat width 520 mm6)Beam MILD steel with black power coating thickness 1.6mm7) Mild steel border with chrome plating for every seat & back8) Mild steel handles chrome plated & die pressed legs at the end of chairs9) Gross weight of regular 3-seater will be 31 kg.EACH816640.001,33,120.00Total3,33,10,935.00(Handwritten note near item 28): Rate Approved(Signatures at the bottom):JE 31/5/26 | BCD/MUZAFFARPURAE 15/5/26 | BCD/MUZAFFARPUREE | BCD/MUZAFFARPURSince this is the final page of the document, let me know if you would like me to:Compile all 6 pages (Items 1 to 28) into a single master layout.Export the complete data set into a continuous, copy-pasteable CSV code block for Microsoft Excel.Run a programmatic audit of the calculations across the full sheet to check for errors. 3.00 Each Rs. 36064.00 Rs. 108192.00 108192.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 108192 0 108192.00 0.00 0 0 0 0 0 0

256 AR High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair upholstered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclin 3.00 Each Rs. 14602.00 Rs. 43806.00 43806.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 43806 0 43806.00 0.00 0 0 0 0 0 0

257 AR 3 Seater Chrome ChairLength 1775mm x Depth 690mm x Height 755mm1)Seat & back single section2)Seat is 410 mm from ground3)Perforated mild steel powder coated4)Seat thickness 1.2 mm5)Seat width 520 mm6)Beam MILD steel with black power coating thickness 1.6mm7) Mild steel border with chrome plating for every seat & back8) Mild steel handles chrome plated & die pressed legs at the end of chairs9) Gross weight of regular 3-seater will be 31 kg. 8.00 Each Rs. 16640.00 Rs. 133120.00 133120.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 8 8.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 133120 0 133120.00 0.00 0 0 0 0 0 0

258 (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical conforming to IS:1520 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(b) Suitable HP squirell cage induction motor TEFC, synchronous speed 1500RPM,suitable for operation on 415 volts, 3-Phase, 50Hz, Ac supply with IP55 class of protection for enclosure, horizontal foot mounted type with class F insulation, conforming to IS-325. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechnism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10m outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick aluminium sheet cladding residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(c) M.S fabricated common base plate, coupling , coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with antivibration pad. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

260 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Jockey Pump) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS:1520. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase. 50Hz AC supply with IP55 class of protection for enclousure, horizontal foot mounted type with Class-"F" insulation, conforming to IS:325. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

261 5.6 Fabricating, Supplying, Erection, Testing and commissioning of Electrical control panel cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,compartmentalised with hinged lockable doors, dust and vermin proof, coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and outgoings, suitable for operation on 415V, 3 Phase, 50Hz Ac supply with enclosure protection class IP42 as required: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(Note: All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps). 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

250A, 50KA TPN MCCB, Ics=100% Icu, with fully automatic star/delta starter suitable for 100HP pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation- 2sets 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

125A, 50KA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic star/delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation-2 sets 1.00 Set Rs. 581468.00 Rs. 581468.00 581468.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1 1.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 581468 581468.00 0.00 0 0 0 0 0 0

262 Control for diesel engine comprising - Auto/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode indicating lamp for high/Low Lub. oil pressure, High water Temp and Engine on indication Battery charger suitable for 12V/24V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Designing, Supply Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

263 7 Providing, laying , testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gasket etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

264 9 Supply and fixing single headed external yard hydrant valve with instanteneous Gunmetal/Stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless steel cap and chain as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

265 Supply,fixing,testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS:13095 of following size as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

266 14 Providing, installation, testing and commissioning of non-return valve of following sizes conforming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

267 15 Providing , installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet with 3mm dia holes with stainless steel flange. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

268 Supplying and fixing 63mm dia, 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 ( Type-A) as required: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

269 Supplying and fixing 63mm dia gun metal short branch pipe with 20mm nominal diameter size nozzle confirming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

270 Supplying and fixing for Fire Brigade Connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

271 20 Supplying and fixing air vessel made of 250mm dia. 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 7.00 Set Rs. 17707.00 Rs. 123949.00 123949.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 7 7.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 123949 123949.00 0.00 0 0 0 0 0 0

273 NS 1 M.S. hose cabinet with door fabricated from 16 g M.S. sheet with full glass door and locking arrangement, suitable to accommodate 1 Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required (Approx. size 1.2m x 2.1m). For internal hydrants. 43.00 Each 9500.00 408500.00 408500.00 0.00 0 43 43.00 0.00 0.00 0.00 0.00 408500 408500.00 0.00 0 0 0 0 0 0

274 Supply and fixing single headed internal yard hydrant valve with instanteneous Gunmetal/ Stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless steel cap and chain as required. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20mm nominal dia water hose thermoplastic ( Textile reinforced) type-2 as per IS:12585 20mm nomonal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. " Connections from riser with 25mm dia stop gunmetal valve & M.S Pipe and socket. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

275 ISI marked (IS:2878) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1m long & complete in all respects including initial fill with CO2 gas confirming to IS:307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

276 'ABC' stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate ) 6 kg fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:14609. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

279 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required (Terrace Pump) 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron & bronze impeller with stainless steel shaft, mechanical conforming to IS:1520 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(b) Suitable HP squirell cage induction motor TEFC, synchronous speed 1500RPM,suitable for operation on 415 volts, 3-Phase, 50Hz, Ac supply with IP55 class of protection for enclosure, horizontal foot mounted type with class F insulation, conforming to IS-325. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

Fabricating, Supplying, Erection, Testing and commissioning of Electrical control panel cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,compartmentalised with hinged lockable doors, dust and vermin proof, coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and outgoings, suitable for operation on 415V, 3 Phase, 50Hz Ac supply with enclosure protection class IP42 as required: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

(Note: All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps). 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

125A, 50KA TPN MCCB, Ics=100% Icu, with fully automatic star/delta starter suitable for 60HP pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

280 5.1 63A, 50KA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic star/delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 3.00 Set Rs. 248187.00 Rs. 744561.00 744561.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 3 3.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 744561 744561.00 0.00 0 0 0 0 0 0

281 17.2.1 DSR 2022 (E & m) Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 0 0.00 0.00 0 0 0 0 0 0

282 17.2.3 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 2.00 Each Rs. 108688.00 Rs. 217376.00 217376.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 2 2.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 217376 217376.00 0.00 0 0 0 0 0 0

283 17.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 175.00 Each Rs. 2858.00 Rs. 500150.00 500150.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 175 175.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 500150 500150.00 0.00 0 0 0 0 0 0

284 17.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 20.00 Each Rs. 276.00 Rs. 5520.00 5520.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 20 20.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 5520 5520.00 0.00 0 0 0 0 0 0

285 17.2.6 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. 9.00 Each Rs. 2651.00 Rs. 23859.00 23859.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 9 9.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 23859 23859.00 0.00 0 0 0 0 0 0

287 17.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 1900.00 Mtr. Rs. 359.00 Rs. 682100.00 682100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0.00 0 0 0 0 0 0 0.000 0 1900 1900.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0 0 0.00 0 0 0 0 0 0 0.000 0 682100 682100.00 0.00 0 0 0 0 0 0

289 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern 731.71 SQM Rs. 721.10 527634.15 527634.00 0.00 732 0 731.71 0.00 0.00 0.00 0.00 527634 527634.15 0.15 0 0 0 0 0 0

290 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 731.71 SQM Rs. 90.70 66365.85 66366.00 0.00 732 0 731.71 0.00 0.00 0.00 0.00 66366 66365.85 -0.15 0 0 0 0 0 0

291 11.30.2 40 mm thick fine dressed stone flooring over 20 mm (average) thick base with joint finished fiush:base 1:5 (1 cement: 5 coarse sand )with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.White sand stone 0.00 SQM 878.60 0.00 0.00 0.00 0 0.00 0.00 0.00 0 0 0 0 0 0

292 18.42 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : 0 0.00 0.00 0.00 0.00 0 0 0 0 0

293 18.44 Providing and fixing to filter and lowering to proper levels 40 mm G.I.pipe for tube well including cleaning and priming the tube well. 0 m 60 0.00 0.00 0.00 0.00 0 0 0 0 0

294 18.45 Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. 0 Each 1 0.00 0.00 0.00 0.00 0 0 0 0 0

295 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 0 0.00 0.00 0.00 0.00 0 0 0 0 0

CORRECTION FACTOR @ 0.982 (ON S.NO.294)= Rs. ₹ 441,030,450.00

GST DIFFERENCE @ 5.36% (ON S.NO. 296)= Rs. ₹ 23,639,232.00

ELECTRICAL WORKS

PART-'A' School Building (G+2)

293 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Batten Holder point 160

T/L Light Point Double 56

Consta light point 40 watt 190

Ceiling fan point 142

Exhaust fan point 23

Call Bell point 3

294 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 85 Each 414.00 35,190.00

295 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 76 Each 531.00 40,356.00 #REF!

296 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1216 Meter 309.00 375,744.00

297 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required.(use for AC box) 24 Each 683.00 16,392.00

298 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required.(use for computer point) 52 Each 1,064.00 55,328.00

299 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 27 Each 632.00 17,064.00

300 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT) 1720 Meter 201.00 345,720.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(for Comp +2 nos 5 A) 1185 Meter 246.00 291,510.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(for LED street light) 240 Meter 246.00 59,040.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(for AC) 384 Meter 309.00 118,656.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire(for LED street ;light DB) 15 Meter 422.00 6,330.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire (for light DB) 306 Meter 660.00 201,960.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire (for power DB) 170 Meter 925.00 157,250.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire (for VTPN DB) 120 Meter 1,312.00 157,440.00

301 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.7 12 way, Double door (for street light) 1 Each 2,314.00 2,314.00

302 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type (Power DB-10, Light DB-18) 28 Each 4,184.00 117,152.00

303 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 346 Each 237.00 82,002.00

304 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) 0.00

2.33.1 4 way, Double door, I/C 160A, MCCB(forPower VTPN) (for Ground +first floor & Second Floor) 3 Each 12,107.00 36,321.00

2.33.2 6 way, Double door, I/C 160A, MCCB (for Ground +first floor & Second Floor) Light VTPN 3 Each 13,710.00 41,130.00

305 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.3 160 A, 36 KA, FPMCCB (for VTPN) 6 Each 13,698.00 82,188.00 #REF!

306 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

307 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 274 Each 64.00 17,536.00

308 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 160 Each 80.00 12,800.00

309 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.6 15 watt LED lamp 160 Each 250.00 40,000.00

310 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 3 Each 351.00 1,053.00

311 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. (For Non-residential building) 56 Each 762.00 42,672.00

312 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

313 5.6 Supplying and fixing following types aluminium extruded suspended type LED luminaire with minimum efficacy 100 lm/w ensuring uniform and continuous illumination including suspension system complete with electronic driver etc and connection with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

314 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

315 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

316 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 50 Each 34.00 1,700.00

317 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 142 Each 358.00 50,836.00

318 DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 142 Each 2,695.00 382,690.00

319 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

320 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.2 125 A, 36 KA, FPMCCB (Spare) 1 Each 8,676.00 8,676.00

2.4.3 160 A, 36 KA, FPMCCB (One Spare) 7 Each 13,698.00 95,886.00 #REF!

321 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole (Building Light) 1 Each 1,198.00 1,198.00

322 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.4 40 A to 63 A, four pole (One Spare) Campus Light 2 Each 2,324.00 4,648.00

323 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

324 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 30 Sq.ft. 1,809.00 54,270.00

325 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection etc. as reqd. (Double Bus Bar) 20 P/Kg 871.00 17,420.00

326 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00

327 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.11 95 sq. mm, 3.5 core (For Genset) 150 Metre 950.00 142,500.00

7.7.15 240 sq. mm, 3.5 core (Double Run) 220 Metre 2,228.00 490,160.00

328 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.2 Above 35 sq. mm and upto 95 sq. mm 140 Metre 326.00 45,640.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 140 Metre 368.00 51,520.00

329 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

330 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 6,884.00 13,768.00

331 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 Metre 144.00 4,320.00

Lighting Arrester 0.00

332 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 12 Each 416.00 4,992.00

333 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 36 Each 81.00 2,916.00

334 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 200 Metre 102.00 20,400.00 #REF!

335 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 150 Metre 145.00 21,750.00

332 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 24 Each 102.00 2,448.00

333 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 6 Set 6,884.00 41,304.00

334 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 80 Metre 53.00 4,240.00

( SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM) 0.00

335 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required 38 KWP 54,280.00 2,062,640.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. 0.00

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase,4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. 0.00

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. 0.00

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. 0.00

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Meta OxideVaristors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. 0.00

f) Lightning, surge voltage protection, earthing protection and grid islanding. 0.00

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. 0.00

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. 0.00

AUTOMATIC FIRE ALARM & DETECTION SYSTEM 0.00

336 DSR 28.2 Supply, Installation, Testing and Commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capabale of supporting not less than 240 devices ( including detectors) and minimum 120 detectors per loop and loop length upto 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230+_5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system(which is part of the scheduleof work under SH: PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/Modbus over IP complete as per specification. 0.00

28.2.1.2 Two Loop Panel. 1 Each 250,420.00 250,420.00

28.2.3 Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 2 Each 113,734.00 227,468.00

28.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 80 Each 3,004.00 240,320.00

28.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 15 Each 306.00 4,590.00

28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. 9 Each 2,787.00 25,083.00

28.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required 9 Each 3,434.00 30,906.00

28.2.10 Supplying, installation, testing & commissioning of addressable fire control module complete as required 9 Each 3,156.00 28,404.00 #REF!

28.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 9 Each 4,063.00 36,567.00

SAFETY ACCESSORIES & MISC 0.00

337 NS Rubber mat of 16mm thik and 1000mm wide to with stand 15KV dielectric strength as per is 5424. 1969 5 Meter 2,208.00 11,040.00

338 NS Shock treatment chart in English and local language duly framed with glass 2 Nos 696.00 1,392.00

339 NS First aid box complete with all standard first aid materials 2 Nos 602.00 1,204.00

340 NS Rubber gloves 11 KV grade as per IS 4770-68 2 Pairs 401.00 802.00

Computer Networking (LAN) 0.00

341 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

342 1.27.1 Supplying and Fixing 75mmx75mm modules, GI box along with modular base & cover plate for modular fitting in recess etc as required. ( Make - Legrand/ Honeywell ) 60 Each 234.00 14,040.00

343 39.13 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 0.00

39.13.1 Copper Patch Cords of length 1m (3ft) 60 Each 173.00 10,380.00

39.13.2 Copper Patch Cords of length 3m (10ft) 60 Each 405.00 24,300.00

344 DSR 39.23.1 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

345 DSR 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

346 DSR 39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel 3 Each 5,278.00 15,834.00

347 NS Supply, Installation, Testing & Commissioning of Ethernet Managed Switch with fiber Module Along with AC Power Supply: 24 x 10/100/1000BASE-T ports, 4 x Gigabit RJ45/SFP Combo ports, Advanced L2 switching and security features, L2+ Static Routing, Optional “standard mode” or “surveillance mode” management user interface etc as required. ( Make - D-Link/ Netgear/ Mortek/ HP) 3 Each 20,758.00 62,274.00

348 NS Supply installation testing & commissioning of Ethernet Unmanaged Switch Without fiber Module Along with AC Power Supply: 24x10/100/1000 Base T LAN switch including necessary connection of CAT 6 UTP cable etc as required. ( Make - D-Link/ Netgear/ TP-Link) 3 Each 19,070.00 57,210.00

349 1.58 Supplying and drawing UTP 4 pair CAT-6 PVC insulated and sheathed LAN cable through existing PVC conciuit including connection, testing etc. as required. ( D-Link ) 0.00

1.58.1 1 run of cable 2100 Point 52.00 109,200.00

350 NS Supplying and fixing of tooless RJ 45 information for CAT 6 U/UTP white colour Arteor Modules 1 along with built in crimping handfree min 5 times reconnection possible and shutter protection etc as required. ( Make - Legrand/ Honeywell/ Eqv. ) 60 Each 545.00 32,700.00

PART-'B' HOSTEL Building (G+4) 0.00

Boy's Hostel Block-1 (G+4) 0.00

351 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00 #REF!

Batten Holder point 448 0.00

Tube LED light 321 0.00

Ceiling fan point 301 0.00

Exhaust fan point 76 0.00

D/L Point 197 0.00

call bell point 1 0.00

Street light point 12 0.00

352 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 97 Each 414.00 40,158.00

353 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 99 Each 531.00 52,569.00

354 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1500 Meter 309.00 463,500.00

355 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 3 Each 3,008.00 9,024.00

356 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 8 Each 683.00 5,464.00

357 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 251 Each 632.00 158,632.00

358 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT) 3500 Meter 201.00 703,500.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for 2 Nos 5 A Socket) 2000 Meter 201.00 402,000.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 160 Meter 309.00 49,440.00

1.7.10 4 X 4 sq. mm + 1 X 4 sq. mm earth wire (for 3phase industrial Socket in kitchen) 60 Meter 459.00 27,540.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire(for light DB) 580 Meter 660.00 382,800.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire(for power DB) 560 Meter 925.00 518,000.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire(from Panel to VTPN) 250 Meter 1,312.00 328,000.00

359 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.8 14 way, Double door(Power DB-1, Light DB-1) 2 Each 3,201.00 6,402.00

360 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type (Power DB-27, Light DB-29, Industrial socket DB-1) 57 Each 4,184.00 238,488.00 #REF!

361 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 708 Each 237.00 167,796.00

2.12.8 40 A to 63 A, TP&N(3nos for 3 phase industrial socket) 60 Each 2,329.00 139,740.00

362 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole(for SP&N DB) 2 Each 1,198.00 2,396.00

363 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) 0.00

2.33.1 4 way, Double door, I/C 160A, MCCB(1no each floor)(for Power DB) 5 Each 12,107.00 60,535.00

2.33.2 6 way, Double door, I/C 160A, MCCB(1no each floor)(for Light DB) 5 Each 13,710.00 68,550.00

364 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

365 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

366 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 607 Each 64.00 38,848.00

367 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 448 Each 80.00 35,840.00

368 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.6 15 watt LED lamp 448 Each 250.00 112,000.00

369 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 1 Each 351.00 351.00

370 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

371 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 321 Each 521.00 167,241.00

372 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

373 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

374 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 301 Each 358.00 107,758.00 #REF!

375 DSR 9.2 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. Make :- Bajaj/Crompton/Orient/Usha. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 301 Each 2,695.00 811,195.00

376 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

8.17.2 380 mm sweep(for kitchen) 5 Each 5,560.00 27,800.00

CUBICAL PANEL(Main & Submain panel), CABLE & EARTHING 0.00

Submain Panel for 1st to 4th floor 0.00

377 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.3 160 A, 36 KA, FPMCCB (four Spare) 12 Each 13,698.00 164,376.00

378 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

379 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 100 Sq.ft. 1,809.00 180,900.00

380 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection with copper strip etc. as reqd. (Two Bus Bar) 50 P/Kg 871.00 43,550.00

381 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 4 Each 6,536.00 26,144.00

382 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.10 70 sq. mm, 3.5 core (from GF to 1st, 2nd, 3rd & 4th floor) 70 Metre 748.00 52,360.00

383 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 60 Metre 109.00 6,540.00

Main panel 0.00

384 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.2 125 A, 30 KA, FPMCCB (for Lift, ) 2 Each 8,676.00 17,352.00

2.4.3 160 A, 36 KA, FPMCCB (one Spare)(2nos VTPN on GF) 3 Each 13,698.00 41,094.00

2.4.6 250 A, 50 KA, FPMCCB(one Spare) 5 Each 19,613.00 98,065.00

385 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole (for St. Light + spare) 3 Each 1,198.00 3,594.00

386 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

387 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 40 Sq.ft. 1,809.00 72,360.00

388 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection with Copper Strip etc. as reqd. 40 P/Kg 871.00 34,840.00

389 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00

390 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.16 300 sq. mm, 3.5 core (Main) Double Run 200 Metre 2,764.00 552,800.00

7.7.13 150 sq. mm, 3.5 core (For Genset) 80 Metre 1,373.00 109,840.00

391 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 190 Metre 368.00 69,920.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm 70 Metre 336.00 23,520.00

392 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 4 Set 16,675.00 66,700.00

393 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 60 Metre 144.00 8,640.00

Lighting Arrester 0.00

394 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 6 Each 416.00 2,496.00

395 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 12 Each 81.00 972.00

396 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 160 Metre 102.00 16,320.00

397 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 150 Metre 145.00 21,750.00

398 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 18 Each 102.00 1,836.00

399 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 6 Set 6,884.00 41,304.00

400 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 120 Metre 133.00 15,960.00

8 Passenger Lift 0.00

401 PAR CPWD 4.1.1 Supply, installation, testing, commissioning, and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD specification including automatic rescue device (ARD). All standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turnkey basis. Conforming to NBC/statutory norms and fulfilling following requirements for MRL Type 0.00

(i) Type : Passenger Lift 0.00 #REF!

(ii) Load : As Specified 0.00

(iii) (iii) Speed: 1.00 metre/sec. 0.00

(iv) (iv) Control: ACV3F, 32bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (building monitoring system) supporting software. 0.00

(v) Motor/machine: Permanent magnetic synchronous gearless motor. 0.00

(vi) Operation: Simplex collective selective with/without lift attendant. 0.00

(vii) Total rise: About 3 mtrs. (approx) between two stops. 0.00

(viii) Landings: All floors on same side. 0.00

(xi) Floors served: As Specified 0.00

(x) Signal : Digital Car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift car. 0.00

(xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately. 0.00

(xii) Guide rail: As per manufacturer's specification. (xiii) Lift & car size: As per manufacturer's design and as per CPWD specification 0.00

(xiii) Lift & car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS ) 0.00

(xiv) Car entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xv) Landing entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xvi) Car door: S.S. (stainless steel) hairline finish centre /telescopic opening door. 0.00

(xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with. 0.00

(xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. 0.00

(xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides. 0.00

(xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform. 0.00

(xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights 0.00

(xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided) 0.00

(xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. 0.00

(xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room 0.00

(xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room ground floor 0.00

(xxvi) Position of machine room: Directly above the hoistway. 0.00

(xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V Iphase 50Hz terminated in machine room. 0.00 #REF!

(xxviii) Fire man switch: Fire man switch at machine room/terminal landing 0.00

(xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. 0.00

(xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. 0.00

(xxxi) Spring buffer/hydraulic buffer shall be provided 0.00

(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. 0.00

(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. 0.00

(xxxiv) In the hoist way fascia plate shall be provided. 0.00

(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. 0.00

(xxxvi) Car top safety barricade shall be provided. 0.00

(xxxvii) ARD (automatic rescue device): Solid state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure. 0.00

(Make:- OTIS/ KONE/ SCHINDLER/MITSHUBISHI/ THYSSENKRUPP) with 3 years free maintenance during DLP Period. (Including 3rd Party Inspection) 0.00

Lift Wiring 0.00

402 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Bulk Head Point 10 0.00

403 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 20 Metre 246.00 4,920.00

404 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

405 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.1 Upto 35 sq. mm (Clamped with 1 mm thick saddle) 50 Metre 43.00 2,150.00

406 5.10 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 10 Each 1,275.00 12,750.00

407 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4 Set 13,721.00 54,884.00

408 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 100 Metre 144.00 14,400.00

( SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM) 0.00 #REF!

409 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required 49 KWP 54,280.00 2,659,720.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. 0.00

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase,4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. 0.00

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. 0.00

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. 0.00

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Meta OxideVaristors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. 0.00

f) Lightning, surge voltage protection, earthing protection and grid islanding. 0.00

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. 0.00

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. 0.00

AUTOMATIC FIRE ALARM & DETECTION SYSTEM 0.00

410 DSR 28.2.1 Supply, Installation, Testing and Commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capabale of supporting not less than 240 devices ( including detectors) and minimum 120 detectors per loop and loop length upto 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230+_5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system(which is part of the scheduleof work under SH: PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/Modbus over IP complete as per specification. 0.00

28.2.1.2 Two Loop Panel. 1 Each 250,420.00 250,420.00

28.2.3 Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 2 Each 113,734.00 227,468.00

28.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 140 Each 3,004.00 420,560.00

28.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 25 Each 306.00 7,650.00

28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. 20 Each 2,787.00 55,740.00

28.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required 20 Each 3,434.00 68,680.00

28.2.10 Supplying, installation, testing & commissioning of addressable fire control module complete as required 20 Each 3,156.00 63,120.00

28.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 20 Each 4,063.00 81,260.00

SAFETY ACCESSORIES & MISC 0.00

411 NS Rubber mat of 16mm thik and 1000mm wide to with stand 15KV dielectric strength as per is 5424. 1969 5 Meter 2,208.00 11,040.00

412 NS Shock treatment chart in English and local language duly framed with glass 2 Nos 696.00 1,392.00

413 NS First aid box complete with all standard first aid materials 2 Nos 602.00 1,204.00 #REF!

414 NS Rubber gloves 11 KV grade as per IS 4770-68 2 Pairs 401.00 802.00

Computer Networking (LAN) 0.00

415 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

416 1.27.1 Supplying and Fixing 75mmx75mm modules, GI box along with modular base & cover plate for modular fitting in recess etc as required. ( Make - Legrand/ Honeywell ) 200 Each 234.00 46,800.00

417 39.13 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 0.00

39.13.1 Copper Patch Cords of length 1m (3ft) 200 Each 173.00 34,600.00

39.13.2 Copper Patch Cords of length 3m (10ft) 200 Each 405.00 81,000.00

418 DSR 39.23.1 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

419 DSR 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

420 DSR 39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel 15 Each 5,278.00 79,170.00

421 NS Supply, Installation, Testing & Commissioning of Ethernet Managed Switch with fiber Module Along with AC Power Supply: 24 x 10/100/1000BASE-T ports, 4 x Gigabit RJ45/SFP Combo ports, Advanced L2 switching and security features, L2+ Static Routing, Optional “standard mode” or “surveillance mode” management user interface etc as required. ( Make - D-Link/ Netgear/ Mortek/ HP) 15 Each 20,758.00 311,370.00

422 NS Supply installation testing & commissioning of Ethernet Unmanaged Switch Without fiber Module Along with AC Power Supply: 24x10/100/1000 Base T LAN switch including necessary connection of CAT 6 UTP cable etc as required. ( Make - D-Link/ Netgear/ TP-Link) 15 Each 19,070.00 286,050.00

423 1.58 Supplying and drawing UTP 4 pair CAT-6 PVC insulated and sheathed LAN cable through existing PVC conciuit including connection, testing etc. as required. ( D-Link ) 0.00

1.58.1 1 run of cable 8000 Point 52.00 416,000.00

424 NS Supplying and fixing of tooless RJ 45 information for CAT 6 U/UTP white colour Arteor Modules 1 along with built in crimping handfree min 5 times reconnection possible and shutter protection etc as required. ( Make - Legrand/ Honeywell/ Eqv. ) 200 Each 545.00 109,000.00

Grils Hostel Block-1 (G+4) Boy's Hostel 0.00

425 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Batten Holder point 448 0.00

Tube LED light 321 0.00

Ceiling fan point 301 0.00

Exhaust fan point 76 0.00

D/L Point 197 0.00

call bell point 1 0.00 #REF!

Street light point 12 0.00

426 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 97 Each 414.00 40,158.00

427 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 99 Each 531.00 52,569.00

428 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1500 Meter 309.00 463,500.00

429 2.25 Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 3 Each 3,008.00 9,024.00

430 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 8 Each 683.00 5,464.00

431 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 251 Each 632.00 158,632.00

432 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT) 3500 Meter 201.00 703,500.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for 2 Nos 5 A Socket) 2000 Meter 201.00 402,000.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC 160 Meter 309.00 49,440.00

1.7.10 4 X 4 sq. mm + 1 X 4 sq. mm earth wire (for 3phase industrial Socket in kitchen) 60 Meter 459.00 27,540.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire(for light DB) 580 Meter 660.00 382,800.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire(for power DB) 560 Meter 925.00 518,000.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire(from Panel to VTPN) 250 Meter 1,312.00 328,000.00

433 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.8 14 way, Double door(Power DB-1, Light DB-1) 2 Each 3,201.00 6,402.00

434 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type (Power DB-27, Light DB-29, Industrial socket DB-1) 57 Each 4,184.00 238,488.00

435 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 708 Each 237.00 167,796.00

2.12.8 40 A to 63 A, TP&N(3nos for 3 phase industrial socket) 60 Each 2,329.00 139,740.00

436 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole(for SP&N DB) 2 Each 1,198.00 2,396.00

437 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs) 0.00 #REF!

2.33.1 4 way, Double door, I/C 160A, MCCB(1no each floor)(for Power DB) 5 Each 12,107.00 60,535.00

2.33.2 6 way, Double door, I/C 160A, MCCB(1no each floor)(for Light DB) 5 Each 13,710.00 68,550.00

438 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

439 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

440 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 607 Each 64.00 38,848.00

441 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 448 Each 80.00 35,840.00

442 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.6 15 watt LED lamp 448 Each 250.00 112,000.00

443 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 1 Each 351.00 351.00

444 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

445 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 321 Each 521.00 167,241.00

446 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

447 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

448 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 301 Each 358.00 107,758.00

449 DSR 9.2 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. Make :- Bajaj/Crompton/Orient/Usha. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 301 Each 2,695.00 811,195.00

450 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

8.17.2 380 mm sweep(for kitchen) 5 Each 5,560.00 27,800.00

CUBICAL PANEL(Main & Submain panel), CABLE & EARTHING 0.00

Submain Panel for 1st to 4th floor 0.00 #REF!

451 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.3 160 A, 36 KA, FPMCCB (four Spare) 12 Each 13,698.00 164,376.00

452 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

453 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 100 Sq.ft. 1,809.00 180,900.00

454 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection with copper strip etc. as reqd. (Two Bus Bar) 50 P/Kg 871.00 43,550.00

455 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 4 Each 6,536.00 26,144.00

456 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.10 70 sq. mm, 3.5 core (from GF to 1st, 2nd, 3rd & 4th floor) 70 Metre 748.00 52,360.00

457 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 60 Metre 109.00 6,540.00

Main panel 0.00

458 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.2 125 A, 30 KA, FPMCCB (for Lift, ) 2 Each 8,676.00 17,352.00

2.4.3 160 A, 36 KA, FPMCCB (one Spare)(2nos VTPN on GF) 3 Each 13,698.00 41,094.00

2.4.6 250 A, 50 KA, FPMCCB(one Spare) 5 Each 19,613.00 98,065.00

459 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole (for St. Light + spare) 3 Each 1,198.00 3,594.00

460 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

461 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 40 Sq.ft. 1,809.00 72,360.00

462 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection with Copper Strip etc. as reqd. 40 P/Kg 871.00 34,840.00

463 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00 #REF!

464 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.16 300 sq. mm, 3.5 core (Main) Double Run 200 Metre 2,764.00 552,800.00

7.7.13 150 sq. mm, 3.5 core (For Genset) 80 Metre 1,373.00 109,840.00

465 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 190 Metre 368.00 69,920.00

7.1.2 Above 95 sq. mm and upto 185 sq. mm 70 Metre 336.00 23,520.00

466 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 4 Set 16,675.00 66,700.00

467 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 60 Metre 144.00 8,640.00

Lighting Arrester 0.00

468 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 6 Each 416.00 2,496.00

469 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 12 Each 81.00 972.00

470 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 160 Metre 102.00 16,320.00

471 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 150 Metre 145.00 21,750.00

472 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 18 Each 102.00 1,836.00

473 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 6 Set 6,884.00 41,304.00

474 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 120 Metre 133.00 15,960.00

8 Passenger Lift 0.00

475 PAR CPWD 4.1.1 Supply, installation, testing, commissioning, and final testing of automatic lift complete in the shaft well and pit already constructed as per CPWD specification including automatic rescue device (ARD). All standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) on turnkey basis. Conforming to NBC/statutory norms and fulfilling following requirements for MRL Type 0.00

(i) Type : Passenger Lift 0.00

(ii) Load : As Specified 0.00

(iii) (iii) Speed: 1.00 metre/sec. 0.00

(iv) (iv) Control: ACV3F, 32bit microprocessor integrated serial communication control system with RMS (remote monitoring system)/BMS (building monitoring system) supporting software. 0.00

(v) Motor/machine: Permanent magnetic synchronous gearless motor. 0.00

(vi) Operation: Simplex collective selective with/without lift attendant. 0.00

(vii) Total rise: About 3 mtrs. (approx) between two stops. 0.00

(viii) Landings: All floors on same side. 0.00 #REF!

(xi) Floors served: As Specified 0.00

(x) Signal : Digital Car position indicator, car travel direction indicator inside car & at all landings, voice annunciator with suitable music shall be provided in the lift car. 0.00

(xi) Shaft size: As per manufacturer's design and as per CPWD specification (Part III LIFTS), Shaft to be constructed separately. 0.00

(xii) Guide rail: As per manufacturer's specification. (xiii) Lift & car size: As per manufacturer's design and as per CPWD specification 0.00

(xiii) Lift & car size: As per manufacturer's design and as per CPWD specification (Part III LIFTS ) 0.00

(xiv) Car entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xv) Landing entrance: As per manufacturer's design and as per CPWD specification (Part III LIFTS). 0.00

(xvi) Car door: S.S. (stainless steel) hairline finish centre /telescopic opening door. 0.00

(xvii) Landing door: S.S. (stainless steel) hairline finish centre/telescopic opening door with. 0.00

(xviii) Door operation: Automatic electric power operated door, full height infrared curtain with multiple criss/cross light beams. 0.00

(xix) Car interior: S.S. (stainless steel) panel with hair line finish on all sides. 0.00

(xx) Car floor: Anti skid PVC flooring on heavy duty M S (mild steel) platform. 0.00

(xxi) Car ceiling & lighting: S. S. (stainless steel) finish with aesthetic appearance with LED ceiling lights 0.00

(xxii) Carventilation: Pressure fan/blower fan (car fan with automatic sleep timer shall be provided) 0.00

(xxiii) Emergency lighting in car: Battery operated emergency lighting in the lift car. 0.00

(xxiv) Intercom system: Battery operated intercom system in lift car, machine room and ground floor/control room 0.00

(xxv) Emergencyalarm: Battery operated alarm bell system in lift car & control room ground floor 0.00

(xxvi) Position of machine room: Directly above the hoistway. 0.00

(xxvii) Electric power supply: AC 415 V, 3 phases 50 Hz & AC 230 V Iphase 50Hz terminated in machine room. 0.00

(xxviii) Fire man switch: Fire man switch at machine room/terminal landing 0.00

(xxix) All car panel buttons and all floor switches must be with Braille language as per lift act. 0.00

(xxx) Audio visual indication in the lift car showing overloading shall be provided such that doors keep open till excess load is removed. 0.00

(xxxi) Spring buffer/hydraulic buffer shall be provided 0.00

(xxxii) Mechanical over speed governor, door key holes in the floor doors shall be provided. 0.00

(xxxiii) Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift agency, along with the other steel structure works, foundations for the machines etc. 0.00

(xxxiv) In the hoist way fascia plate shall be provided. 0.00 #REF!

(xxxv) Permanent wiring in lift machine room and lift well with proper no. of light points, with fixtures, exhaust fan, plug points and 3 phase 440V power supply shall be made in lift shaft by the department, machine room or at desired level. 0.00

(xxxvi) Car top safety barricade shall be provided. 0.00

(xxxvii) ARD (automatic rescue device): Solid state inbuilt automatic rescue device (ARD) automatically rescues passengers trapped in the lift car in between floors in the event of power failure. Automatic operation and immediate action in the event of mains failure, capable of moving the lift to the nearest landing, opens the automatic door of the lift car and floor. Sealed maintenance free battery backup with automatic charging unit and auto changeover device on mains failure. 0.00

(Make:- OTIS/ KONE/ SCHINDLER/MITSHUBISHI/ THYSSENKRUPP) with 3 years free maintenance during DLP Period. (Including 3rd Party Inspection) 0.00

Lift Wiring 0.00

476 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Bulk Head Point 10 0.00

477 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 20 Metre 246.00 4,920.00

478 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

479 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 0.00

7.4.1 Upto 35 sq. mm (Clamped with 1 mm thick saddle) 50 Metre 43.00 2,150.00

480 5.10 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 10 Each 1,275.00 12,750.00

481 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4 Set 13,721.00 54,884.00

482 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 100 Metre 144.00 14,400.00

( SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM) 0.00

483 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required 49 KWP 54,280.00 2,659,720.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. 0.00

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase,4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. 0.00

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. 0.00

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. 0.00

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Meta OxideVaristors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. 0.00 #REF!

f) Lightning, surge voltage protection, earthing protection and grid islanding. 0.00

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. 0.00

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. 0.00

AUTOMATIC FIRE ALARM & DETECTION SYSTEM 0.00

484 DSR 28.2.1 Supply, Installation, Testing and Commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capabale of supporting not less than 240 devices ( including detectors) and minimum 120 detectors per loop and loop length upto 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230+_5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system(which is part of the scheduleof work under SH: PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/Modbus over IP complete as per specification. 0.00

28.2.1.2 Two Loop Panel. 1 Each 250,420.00 250,420.00

28.2.3 Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. 2 Each 113,734.00 227,468.00

28.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 140 Each 3,004.00 420,560.00

28.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 25 Each 306.00 7,650.00

28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. 20 Each 2,787.00 55,740.00

28.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required 20 Each 3,434.00 68,680.00

28.2.10 Supplying, installation, testing & commissioning of addressable fire control module complete as required 20 Each 3,156.00 63,120.00

28.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 20 Each 4,063.00 81,260.00

SAFETY ACCESSORIES & MISC 0.00

485 NS Rubber mat of 16mm thik and 1000mm wide to with stand 15KV dielectric strength as per is 5424. 1969 5 Meter 2,208.00 11,040.00

486 NS Shock treatment chart in English and local language duly framed with glass 2 Nos 696.00 1,392.00

487 NS First aid box complete with all standard first aid materials 2 Nos 602.00 1,204.00

488 NS Rubber gloves 11 KV grade as per IS 4770-68 2 Pairs 401.00 802.00

Computer Networking (LAN) 0.00

489 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

490 1.27.1 Supplying and Fixing 75mmx75mm modules, GI box along with modular base & cover plate for modular fitting in recess etc as required. ( Make - Legrand/ Honeywell ) 200 Each 234.00 46,800.00

491 39.13 Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required. 0.00

39.13.1 Copper Patch Cords of length 1m (3ft) 200 Each 173.00 34,600.00

39.13.2 Copper Patch Cords of length 3m (10ft) 200 Each 405.00 81,000.00 #REF!

492 DSR 39.23.1 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

493 DSR 39.23 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. 0.00

494 DSR 39.11 Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel 15 Each 5,278.00 79,170.00

495 NS Supply, Installation, Testing & Commissioning of Ethernet Managed Switch with fiber Module Along with AC Power Supply: 24 x 10/100/1000BASE-T ports, 4 x Gigabit RJ45/SFP Combo ports, Advanced L2 switching and security features, L2+ Static Routing, Optional “standard mode” or “surveillance mode” management user interface etc as required. ( Make - D-Link/ Netgear/ Mortek/ HP) 15 Each 20,758.00 311,370.00

496 NS Supply installation testing & commissioning of Ethernet Unmanaged Switch Without fiber Module Along with AC Power Supply: 24x10/100/1000 Base T LAN switch including necessary connection of CAT 6 UTP cable etc as required. ( Make - D-Link/ Netgear/ TP-Link) 15 Each 19,070.00 286,050.00

497 1.58 Supplying and drawing UTP 4 pair CAT-6 PVC insulated and sheathed LAN cable through existing PVC conciuit including connection, testing etc. as required. ( D-Link ) 0.00

1.58.1 1 run of cable 8000 Point 52.00 416,000.00

498 NS Supplying and fixing of tooless RJ 45 information for CAT 6 U/UTP white colour Arteor Modules 1 along with built in crimping handfree min 5 times reconnection possible and shutter protection etc as required. ( Make - Legrand/ Honeywell/ Eqv. ) 200 Each 545.00 109,000.00

Part-'C' Teachers Quaters Building (G+2) 0.00

499 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Batten Holder point 131 0.00

T/L light point 110 0.00

Ceiling fan point 52 0.00

Exhaust fan point 19 0.00

Call Bell point 10 0.00

D/L point 21 0.00

St. light point 8 0.00

500 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 42 Each 414.00 17,388.00

501 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 86 Each 531.00 45,666.00

502 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1290 Meter 309.00 398,610.00

503 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required.(use for AC box) 31 Each 683.00 21,173.00

504 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required.(use for computer point) 31 Each 1,064.00 32,984.00

505 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 #REF!

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT ) 880 Meter 201.00 176,880.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(for Comp ) 465 Meter 246.00 114,390.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(for AC) 465 Meter 309.00 143,685.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire(for Light DB ) 120 Meter 422.00 50,640.00

1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire(for powr DB ) 110 Meter 557.00 61,270.00

506 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

1.15.1 1 X 1.5 sq. mm(for Inverter wiring) 600 Meter 38.00 22,800.00

507 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.7 12 way, Double door 12 Each 2,314.00 27,768.00

2.8.8 14 way, Double door 11 Each 3,201.00 35,211.00

508 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 252 Each 237.00 59,724.00

509 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 180 Each 64.00 11,520.00

510 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 131 Each 80.00 10,480.00

511 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

513 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 10 Each 351.00 3,510.00

514 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 110 Each 521.00 57,310.00

515 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

516 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

517 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

518 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 25 Each 34.00 850.00 #REF!

519 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 52 Each 358.00 18,616.00

520 DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 52 Each 2,695.00 140,140.00

521 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

522 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required. 0.00

2.1.3 63 Amp, double pole 10 Each 4,463.00 44,630.00

523 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 0.00

524 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

525 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole (Two spare, One for Building Light) 11 Each 1,198.00 13,178.00

2.13.4 40 A to 63 A, four pole (One for Campus Light) 2 Each 2,324.00 4,648.00

526 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

527 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) with metering Space 30 Sq.ft. 1,809.00 54,270.00

528 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection etc. as reqd. 15 P/Kg 871.00 13,065.00

529 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

530 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

531 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm 140 Metre 336.00 47,040.00

532 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

533 3.21 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 6,884.00 13,768.00

534 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 Metre 144.00 4,320.00

Lighting Arrester 0.00

535 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 8 Each 416.00 3,328.00

536 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 24 Each 81.00 1,944.00

537 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 120 Metre 102.00 12,240.00

538 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 180 Metre 145.00 26,100.00

539 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 16 Each 102.00 1,632.00

540 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4 Set 6,884.00 27,536.00

541 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 80 Metre 144.00 11,520.00

( SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM) 0.00

542 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required 15 KWP 54,280.00 814,200.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. 0.00

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase,4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. 0.00

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. 0.00

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. 0.00

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Meta OxideVaristors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. 0.00

f) Lightning, surge voltage protection, earthing protection and grid islanding. 0.00

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. 0.00

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. 0.00

SAFETY ACCESSORIES & MISC 0.00

543 NS Rubber mat of 16mm thik and 1000mm wide to with stand 15KV dielectric strength as per is 5424. 1969 3 Meter 2,208.00 6,624.00

544 NS Shock treatment chart in English and local language duly framed with glass 1 Nos 696.00 696.00

545 NS First aid box complete with all standard first aid materials 1 Nos 602.00 602.00 #REF!

546 NS Rubber gloves 11 KV grade as per IS 4770-68 1 Pairs 401.00 401.00

Part-'D' Staff Quaters Building (G+3) 0.00

547 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Batten Holder Point 64 0.00

T/Light point 64 0.00

Ceiling fan point 24 0.00

Exhaust fan point 24 0.00

Call Bell point 8 0.00

D/L point 10 0.00

548 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 40 Each 414.00 16,560.00

549 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. (multy point) 32 Each 632.00 20,224.00

550 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 40 Each 531.00 21,240.00

551 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 440 Meter 309.00 135,960.00

552 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required.(use for AC box) 16 Each 683.00 10,928.00

553 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT) 485 Meter 201.00 97,485.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(for Street Light & 2 nos 5 A Socket) 410 Meter 246.00 100,860.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(for AC) 192 Meter 309.00 59,328.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire(for light DB) 100 Meter 422.00 42,200.00

1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire(for Power DB + 63A DP GND Floor) 278 Meter 557.00 154,846.00

554 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

555 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.7 12 way, Double door 16 Each 2,314.00 37,024.00 #REF!

556 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 160 Each 237.00 37,920.00

557 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 105 Each 64.00 6,720.00

558 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 64 Each 80.00 5,120.00

559 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

561 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 8 Each 351.00 2,808.00

562 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 64 Each 521.00 33,344.00

563 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

564 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

565 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

566 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 24 Each 358.00 8,592.00

567 DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 24 Each 2,695.00 64,680.00

568 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

569 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required. 0.00

2.1.3 63 Amp, double pole 8 Each 4,463.00 35,704.00

570 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 0.00

571 2.6 Providing and fixing following capacity double pole/ four pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required. 0.00 #REF!

2.6.2 63 A, double pole 8 Each 4,418.00 35,344.00

572 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

573 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole (2 spare, 1 for Building Light, 1 for Campus Light) 12 Each 1,198.00 14,376.00

574 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

575 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) with metring Space 24 Sq.ft. 1,809.00 43,416.00

576 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection etc. as reqd. 8 P/Kg 871.00 6,968.00

577 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

578 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.9 50 sq. mm, 3.5 core (Gen Set) 100 Metre 561.00 56,100.00

579 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.2 Above 35 sq. mm and upto 95 sq. mm 200 Metre 326.00 65,200.00

580 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

581 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 2 Set 16,675.00 33,350.00

582 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 40 Metre 144.00 5,760.00

Lighting Arrester 0.00

583 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 8 Each 416.00 3,328.00

584 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 32 Each 81.00 2,592.00

585 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 180 Metre 102.00 18,360.00

586 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 220 Metre 145.00 31,900.00

587 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 16 Each 102.00 1,632.00 #REF!

588 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 4 Set 6,884.00 27,536.00

589 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 40 Metre 53.00 2,120.00

( SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM) 0.00

590 DSR 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required 0.00

a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. 5 KWP 54,280.00 271,400.00

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase,4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. 0.00

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. 0.00

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. 0.00

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and otheraccessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Meta OxideVaristors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. 0.00

f) Lightning, surge voltage protection, earthing protection and grid islanding. 0.00

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. 0.00

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. 0.00

SAFETY ACCESSORIES & MISC 0.00

591 NS Rubber mat of 16mm thik and 1000mm wide to with stand 15KV dielectric strength as per is 5424. 1969 3 Meter 2,208.00 6,624.00

592 NS Shock treatment chart in English and local language duly framed with glass 1 Nos 696.00 696.00

593 NS First aid box complete with all standard first aid materials 1 Nos 602.00 602.00

594 NS Rubber gloves 11 KV grade as per IS 4770-68 1 Pairs 401.00 401.00

Part-'E' CCTV Camera (for School Building ) 0.00

595 DSR 40.11 Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions. 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. 6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0) 0.00

8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply. 0.00

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing) 16) The VMS application shall support all the features & functionalities of the offered cameras. 17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 0.00

21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF 22) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 23) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm 24) It should have Web and GUI interface. 25) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 0.00

DSR 40.11.2 64 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/36/64, 2nd screen: 1/4/8/9/16 2 Nos 82,600.00 165,200.00

596 DSR 40.1 Supplying Installation Testing and Commissioning of 2 MP IP IR Dome Camera having following specifications, type of lens and features etc :- 0.00 #REF!

1) Signal System: PAL/NTSC, Signal to Noise Ratio: >50 dB, Camera should display Camera title, Date & Time in live & recorded video 0.00

2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light ompensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0.00

3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 0.00

4) Wide Dynamic Range:- WDR (120db or more) 0.00

5) Digital Noise Reduction:- DNR (3D) On/Off 0.00

6) Video Streaming & Frame Rates :- Triple streaming , configurable (Main stream: 2MP (1920 ×1080)@25/30 fps,Sub streams minimum: 720P@25/30 fps). 0.00

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 0.00

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 0.00

9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 0.00

10) Recording Management: Format SD, overwrite, storage management, video to NAS device 0.00

11) Alarm Trigger : Motion/tampering detection; audio detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 0.00

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast 0.00

13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 0.00

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 0.00

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 0.00

17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 0.00

19) Operating Condition:- Ambient Temperature:- (-) 05°C to 50°C, humidity 95% (max) (non-condensing) 0.00

40.1.1 2MP (@ 25/30fps@1080P (1920×1080)) IP IR Dome Camera with 2.8/ 3.6mm fixed lens 25 Nos 8,048.00 201,200.00

597 DSR 40.4 Supplying Installation Testing and Commissioning of4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 0.00

1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 0.00

2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 0.00

3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 0.00

4) Wide Dynamic Range:- WDR (120dB or more) 0.00

5) Digital Noise Reduction:- DNR (3D) On/Off 0.00

6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 0.00

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 0.00 #REF!

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 0.00

9) Onboard Storage: Camera should support built-inm Micro SD/ SDHC/ SDXC Card slot upto 512 GB. Itshould be supplied with minimum 128GB memory Card. 0.00

10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 0.00

11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 0.00

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 0.00

13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 0.00

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 0.00

17) Power Requirement: 12VDC/24 VDC/PoE(802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- (-)05°C to 50°C, humidity 95% (max) (non-condensing) 20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS 0.00

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) 8 Nos 10,063.00 80,504.00

40.4.2 4MP @ 25/30fps@1440P (2560x1440) Outdoor Bullet Camera with 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens. 2 Each 23,754.00 47,508.00

598 NS 16- port Gigabit Unmanaged PoE switch (DS-3E0518P-E/M) Description- supply, installation, testing & Commissioning of Port POE Switch. 2 Nos 18,450.00 36,900.00

599 NS 8- port PoE switch with 2 Giga Uplink (CP-DNW GPU8G296) Description- supply, installation, testing & Commissioning of 8 Port POE Switch. 3 Nos 5,451.00 16,353.00

600 DSR 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications. 0.00

601 NS 6U DVR/Network Rack Description- supply, installation 6U Network Rack for Mounting NVR & POE Switch. 1 Nos 5,563.00 5,563.00

602 NS 2U DVR/Network Rack Description- supply, installation 2U Network Rack for Mounting NVR & POE Switch. 3 Nos 1,279.00 3,837.00

603 NS RJ 45 Connector Description- supply, installation, testing & Commissioning of RJ4 Connector for connection between CCTV Camera and POE Switch 100 Nos 25.00 2,500.00

604 NS Cat-6 PVC insulated and sheathed LAN cable. Description- supply and drawing UTP 4 Pair Cat-6 PVC Insulated and sheathed LAN cable through existing PVC conduit including connection, testing etc required. 1400 Meter 40.00 56,000.00

605 DSR-42.4 LED Display Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required. 0.00

DSR-42.4.3 55 inch or larger 1 Nos 82,057.00 82,057.00

606 NS Wireless Mouse Description- supply, installation, testing & Commissioning of Wireless Mouse for Control NVR 1 Nos 875.00 875.00

607 NS HDMI Cable Description- supply, installation, testing & Commissioning of HDMI Cable 1 Nos 5,500.00 5,500.00

Part-'F' Campus light and Feedar Panel Work. 0.00

608 8.22 Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00

8.21.1 Single arm, 1000 mm (8 octagonal pole for Badminton Court) 38 Each 19,292.00 733,096.00 #REF!

609 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

610 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. 0.00

9.16.1 For 4 metre pole (500mm X 500mm X 1000mm) 63 Each 3,305.00 208,215.00

611 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

612 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.7 25 sq. mm, 3.5 core (for feeder) 140 Metre 346.00 48,440.00

613 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

614 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

615 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.3 40 A to 63 A, double pole 3 Each 1,198.00 3,594.00

616 8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) (6 sq feet for Badminton Court) 12 Sq.ft. 2,261.00 27,132.00

617 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 2 Meter 925.00 1,850.00

618 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection etc. as reqd. 4 P/Kg 871.00 3,484.00

619 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 6 Each 6,536.00 39,216.00

620 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 Set 6,884.00 13,768.00

621 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 Metre 144.00 4,320.00

622 3.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble as required. 30 Metre 37.00 1,110.00 #REF!

Outdoor feeder Panel Work 0.00

623 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

2.4.1 100 A, 30 KA, FPMCCB (Campus Light) 2 Each 8,172.00 16,344.00

2.4.6 250 A, 50 KA, FPMCCB (Two Spare) 3 Each 19,613.00 58,839.00

2.4.7 400 A, 50 KA, FPMCCB (One Spare) 4 Each 45,651.00 182,604.00

624 A/R SITC of ACB with microprocessor release with overload, short circuit neutral protection instantaneous ground fault protection (LSING) LES icU lew for Isec four total selectivity ambient temperature 50 dig, C in with breaking capacity of 50KA/60KA 800 A Capacity. 0.00

4 Pole 415 Volts conforming to IS/OEC : 60947-2 2 Each 179,604.00 359,208.00

625 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.13.4 40 A to 63 A, four pole (Spare) 2 Each 2,324.00 4,648.00

626 8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) for 2 Outdoor Feeder Panel 36 Sq.ft. 2,261.00 81,396.00

627 A/R S/F copper Strip 50 mm X 5 mm sizes for bus-bar including interconnection etc. as reqd. 30 P/Kg 871.00 26,130.00

628 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 Each 6,536.00 13,072.00

629 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

7.7.17 400 sq. mm, 3.5 core (Double Run) 250 Metre 3,497.00 874,250.00

630 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.3 Above 95 sq. mm and upto 185 sq. mm 160 Metre 336.00 53,760.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 220 Metre 368.00 80,960.00

631 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

632 8.3 Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm ) of specified size and shapeincluding form work, plastering if required, curing etc. as required. (volume of pole/pipe not to be deducted) 2 Cum 7,501.00 15,002.00

633 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 4 Set 16,675.00 66,700.00

634 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 80 Metre 144.00 11,520.00

Total Rs. 0.00 #REF!

Part-'G' Duty Room and Visitor Room 0.00

635 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required. 0.00

Batten Holder point 6 0.00

T/L light point 4 0.00

Ceiling fan point 2 0.00

Exhaust fan point 1 0.00

636 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 2 Each 414.00 828.00

637 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 4 Each 531.00 2,124.00

638 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 60 Meter 309.00 18,540.00

639 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 3 Each 632.00 1,896.00

640 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(for CKT &45 mtr. Multi socket ) 90 Meter 201.00 18,090.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire(for DB ) 10 Meter 422.00 4,220.00

641 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.8.7 12 way, Double door 1 Each 2,314.00 2,314.00

642 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 10 Each 237.00 2,370.00

643 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 9 Each 64.00 576.00

644 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 6 Each 80.00 480.00

645 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.5 12 watt LED lamp 6 Each 239.00 1,434.00

646 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 4 Each 521.00 2,084.00

647 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00 #REF!

648 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 0.00

649 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 2 Each 358.00 716.00

650 DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 0.00

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 2 Each 2,695.00 5,390.00

651 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

652 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required. 0.00

2.1.3 63 Amp, double pole 1 Each 4,463.00 4,463.00

653 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

654 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering. 0.00

TOTAL (ELECTRICAL) = 56,278,117.00

GRAND TOTAL + (CIVIL) + (ELECTRICAL) = 575,575,976.00

EXECUTIVE ENGINEER,

BUILDING DIVISION, MUZAFFARPUR