REPAIR MAINT TO BOUNDRY WALL ROOF TREATMENT JOINERY PLASTERING FALSE CEILNG FLOORING PLUMBING WORKS ETC AND MISC BR WORKS AT SDO MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

Dismantling wall or ceiling boards including frame work (fibre, pulp insulation etc) any thickness & at any height incl cover fillet complete all as specified and directed.

S&F in position false ceilling comprising of grid system of Armstrong etc for frame work with GI powder coated angle wall runners of size 19 mm x 19 mm cross Tee of size 24 mm x 24 mm and main tee of size 34 mm x 24 mm at 60 cm c/c approx to form a grid of 600 mm x 600 mm filled with 12 mm thick tegular edge of insulation Armstrong ceilling tiles of mineral wool rock fibres make of approved designer false ceilling shall be suspended form roof on main runners @ 0.90 mm c/c by means of suitable suspender (average 1.50 mtr length) 4 mm GI wire with adjustable cleats of hook complete all as specified and directed.

Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. complete as specified and directed.

M&L 15 mm thick rendering in two layers (10 mm & 5 mm) on fair faces of bk / concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement) complete as specified and directed.

M&L PCC Cement concrete 1:2:4, type B-1, 25 MM thick (using 20mm graded stone aggregate) as in floor etc complete as specified and diercted.

M&L brushing neat cement slurry with 3 kg of cement per square meter complete as specified and diercted.

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each complete all as specified and directed.

~Ditto~ all as per item No 8.00 above but exc1.5 Sqm but n.exc. 4 Sqm complete all as specified and directed.

Taking down shutters of any description n exc 1.00 Sqm each complete all as specified and directed.

~Ditto~ all as per item No. 10.00 above but exc 1 Sqm & not exc 2 Sqm each complete all as specified and directed.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete. Note :- Old shutter shall be used retrived from item No. 11

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as specified and diercted.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

M&L for hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel window, ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed.

S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 complete all as specified and directed.

S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified and directed.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified and directed.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as specified and directed.

~Ditto~ all as per item No 39.00 above but except bricks complete all as specified and directed.

M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and fair (Without using extra cement) complete all as specified and directed.

M&L three coat of white wash on newly prepared surfaces on wall , etc complete all as specified and directed.

M & L for preparation of old decorated surfaces of wall for complete removal of existing treatment by scraping with metal plate, wire brush etc and applying two coats of oil emulsion distemper, white or tinned over and including a coat of Birla / JK Wall Care Putty of 3 mm thick complete all as specified and directed. Note for all items:- The quoted rate shall be included for arrangement of necessary scaffolding/ ladder etc. for execution of work at any height of buildings.

Demoliton of cement concrete in ground floor paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed.

M&L 40 mm thick PCC type B - 1 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as specified and directed.

Supply only 38 mm wide glass dividing strips, 3 mm thick complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 300 x 300 x 7 mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured ceramic glazed tiles 300x200x6mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L for 9-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

~Ditto~ all as per item No 53.00 but as in Skirting with 10 mm thick rendering in CM 1:3 complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

~Ditto~ all as per item No 55.00 but as in Skirting with 10mm thick rendering in CM 1:3 complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and directed.

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as specified & directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and diercted.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L 9 mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work complete all as specified and directed.

S&F 5 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and directed.

S&F 5 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and directed.

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

S&F in repairs IVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

S&F PVC ball valve 20 mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms)complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410 mm x 330 mm x 160 mm complete all as directed and specifed.

Taking up or down steel water tubing and connections of the following sizes:-

15 mm bore

20 mm bore

25 mm bore

S&F steel water tubing ‘medium grade’ galvanized fixed to wall or laying in floor complete with provision of all pipe fittings such as: bends, elbows, sockets, union, reducers etc complete all as specified and directed, for the following sizes:-

15 mm bore

20 mm bore

25 mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15 mm bore two way angle cocks, cast copper alloy, fancy type chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.

S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified & directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as specified and directed.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a approved with bracket and fixed to wall complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling complete all as specified and directed.

S&F in repair PVC connection 450mm long with two PTMT nuts complete all as specified and directed.

S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed. Make-Parryware-slimline/ Commander-water bird.

S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour complete all as specified and directed.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate Rack made of stainless steel 600 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as directed and specifed .

VIHUTO YEPTHO

Rameshwar Prasad

MS BIJAY KUMAR AND SONS