REPAIR MAINT TO TILING, TOILET, KITCHEN AND BATHROOM IN OFFICER MD ACCN IN THE AREA OF AGE BR-I UNDER GE (EAST) LUCKNOW.

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate etc complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall etc incl raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 other than fair face of brick work of walls etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 for roof surface/sunken portion finished even and smooth without using extra cement etc complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of oil bound distemper of approved shade over a coat of primer etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade over a coat of alkali resistant priming paint etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall & applying one coat of cement base paint etc complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each and removing to or from store etc complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.0 Sqm each and removing to or from store etc complete all as specified and directed.

Taking down shutters of any description not exc 1.0 sqm including iron mongery and removing from site etc complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm including iron mongery and removing from site etc complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed.

S&F 35 mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F 30 mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hungs with steel handle and steel peg stay etc complete with glazing bars devetailed or welded etc all complete all as specified and directed.

S&F steel windows or ventilator, fixed type, with glazing bars etc complete all as specified and directed.

M&L powder coated aluminum window openable type using 1.50 mm thick frame size 63 x 38 & shutter size 47 x 44 mm (Make - Hindalco/Jindal) including joining cleats ,glazing clips,rubber packing, aluminium snap beading, screws,with necessary fitting and glazing shall be done by using 5 mm thick plain sheet glass (Make - Modi guard/saint gobin) incl aluminum grill and Al wire mess jali etc complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 125 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F butt hinges 100 mm mild steel hinges medium weight complete all as specified and directed.

S&F butt hinges 75 mm mild steel hinges medium weight complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S&F in repair 18/19 mm thick prilaminated partical boad exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter including dismantling complete all as specified and directed.

M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete all as specified and directed.

S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.

S&F PVC cubboard shelf/partition/frame/shutter of thickness 18 mm sides of panel externally impact perfect finish to shutters and jointed together with solvant adhesive 8 mm thick (4 mm x 2 mm) and 12 mm wide PVC sheets is used as gap insert for top and bottom rail 18 mm x 1 mm pvc edge lipping is done on top & bottom side using pvc solvent cement adhesive etc complete all as specified and directed.

S&F 100mm size extruded brass handle, fabricated type polished, ISI marked complete all as specified and directed.

S&F magnet catcher for cup board shutter all as specified, ISI Marked complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7to 8 mm thick(square/Rectanglar) area of each tiles exc 0.18 Sqm but not exc 0.38 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 350x250x7mm/450x350x7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and directed.

M&L for vitrified coloured ceramic tiles 10mm thick (square/rectangular), polished, coloured area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement mortar 1:4 incl roughening of existing surface of any type and brushing neat cement slurry with 3.0 kg per sqm complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick cement plaster with CM (1:4) etc complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, including taking down existing old GI pipes complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, including taking down existing old GI pipes complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing not exc 10cm girth complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 but not exc 500 litre complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tank and mouth of circulating pipe and refixing of capacity exc 500 but not exc 1000 litre complete all as specified and directed.

S&F in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling old tanks complete all as specified and directed.

S&F in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling old tanks complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern, including connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminium anodised hinging device, complete all as specified and directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size630x450mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe making good to floor, complete all as specified & directed.

S&F, in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, complete all as specified and directed.

S&F, in repair, 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair cp soap dish, fancy type, complete all as specified and directed.

S&F in repairs glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 cm wide with CP bracket gaurd and railing 60 cm long complete all as specified and directed.

S&F in repair Glass corner shelves, fancy type, 6 mm thick 250 mm x 250 mm size and fixed over CP brass bracket etc complete all as specified and directed.

S&F, in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair 15mm bore angle valve /stop valve chromium plated fency type.cast copper alloy screwed down high pressure,crutch or butterfly handle, ,screwed both end for pipe or for unions complete all as specified and directed.

S&F in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F in repairs PVC bath cabinet with 4mm thick looking mirror of overall size 560x410mm complete all as specified and directed.

S&F in repairs shower health faucet to EWC ,CP brass with minimum 900mm long CP flexible pipe, connection etc., complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 0.8mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, including taking down old unserviceable sink complete all as specified and directed.

S&F in repairs sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, including taking down old unserviceable sink complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws etc complete all as specified and directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot or cold water screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F in repair, brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed

Demolation and breaking up drain pipes any type etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints, laid in trenches or in floor, complete and including dismantling of old pipe of any size, complete all as specified and directed.

S&F PVC (SWR) bends, any radius of 110 mm bore, complete all as specified and directed.

Demolation of stone slabs and tiles of any description or thickness laid, bedded and pointed in any motar etc complete all as specified and directed.

M&L for18-20 mm thick granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shed of granite stone incl grainding and polishing incl 15 mm thick screed bde or bedding layer in CM (1:6) etc complete all as specified and directed.

M&L rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations etc complete all as specified and directed.

S&F in repair, 75mm PVC (SWR) floor trap, plain with grat-ing including joint-ing with solvent cement complete all as specified and directed.

S&F in repair, grating doom 100 mm dia, PTMT complete all as specified and directed.

S&F in repair CI P or S trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating etc complete all as specified and directed.

M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

S&F 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed.

S&F 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed.

M&L coloured exterior wall cladding stone finished tiles heavy duty factory made ,set and jointed in neat cement slurry as in cladding of wall wiyh grey cement and pigments laid over and incl 15 mm thick cement plaster in CM (1:4) incl dismantiling of old tiles etc complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No -2,universal type suitable of extruded section aluminium body for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg etc complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slab n exc 200 mm thick etc complete all as specified and directed.

use and waste of form work to edges of concrete flates, treads break in floors, window cills, concrete railings, opening in concrete wall, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide etc complete all as specified and directed.

M&L for RCC (1:1.5:3) nominal mix (using 20 mm graded stone aggregate) for any type of RCC work etc complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L mild steel TMT bar 8mm dia, cut to length, bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M & L for providing cement concrete 1:2:4, type B0 (12.5mm graded crushed stone aggregates) as in coping/benchinh complete all as specified and directed.

M&L for repair to steel windows by welding of hinges, window stay, handles etc., including easing and adjusting of window shutter as required complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.

S&F, hold fasts; supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 code E-165 complete all as specified and directed.

M/s Reliable Electromech Systems

R P construction company

M/S KAUSHIK CONSTRUCTION

kaushalya construction

M/s Sachkhand Traders

QUALITY CONSTRUCTIONS CO

yash kumar and co

ANIL CONSTRUCTION

M/S SIDHARTH TRADING CO.

M/S ALOK SRIVASTAVA

M/S MAISUR CONSTRUCTION COMPANY PRIVATE LIMITED