Electrification of Additional building at PHC Chuchot Leh.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a)2 x 1.5 Sq.mm+ 1 x 1.5 Sq.mm earth wire

b)2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

c)2x 6 Sq.mm + 1 x 6 Sq.mm earth wire

c)2x 10 Sq.mm + 1 x 6 Sq.mm earth wire

c)4x 10 Sq.mm + 2 x 6 Sq.mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. For inverter) a)1x1.5 sq.mm

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required a)5/6 A Switch

b)3 pin 5/6 A socket outlet

c)15/16 A switch

d)6 pin 15/16 A socket outlet

e)T.V antenna socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 No's 3 pin 5/6 amps modular socket outlet and 2 No's 5/6 amps modular switch, connection etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a)6 way (4+18) Double Door

a)8 way Double Door (SPN Type)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)Single pole 6/16 amp.

b)Single pole and neutral 32 amp

Supply, installation, testing & commessiong of GI Eletrode Earthing with 84mm dia and 3 meter length, with 40mm x 6mm thick the electorde should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM) The GI electrode shall be surrounded with BEE MOST compound to provide maximum contact between the the electrode and compound should be eco-friendkly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water. The earthing pit should be covered with PVC cover.

Suppying and laying 25mmx5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/ terminating with with G.I nit, bolt, spring, washer etc. as required.( Jointing shall be done by nut bolt & spring washer spaced at 50mm)

Proviiding and fixing 25mm X5mm G.I Strip on surface or in recess for connection etc. as required

Fabrication, supplying, installation testing and commissioning of following pannel made out of 2mm thick M.S Sheet floor mounted, vermin and dust proof, inoor type with suitable size of angle iron legs for grounting in the ground, with lockable type hingrd doors, duly painted with provision for fixing of 1 no incomer MCCB type changr over switch 1 no. including supply and fixing 2 sets of Aluminium Bus Bar, and strips for housing MCB"s 54 Nos, MF Digital Metre and other allied accessories etc. as required (Make as per annexure)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection, etc as required. MCCB FP 250 Amp 36 KA

Change over Switch (on load)FP 250 Amp

Supplying and fixing of following rating 240/415 Volts "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp) SPN 40 Amp

SPN 63 Amp

TPN 63 Amp

Supplying and fixing of 1.1 KV PVC insulated and PVC sheated XLPE Aluminium power cable of following sizes on surface/ surface cable tray/0.50 mtr below ground level etc. as required including carriage upto site of work. (Make as per annxure enclosed) 150 sqmm 3.5 core-Armoured

Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet/ wall Wipro LR02-132-XXX-57-G2or equivalent approved make.

Supplying and fixing followingluminiaries as required 10 watt LED tube light fitting. LL20-111-XXX-65NE WIPRO OR equivalent

20 watt LED tube light fitting. Wipro LL20-221-XXX-65 NE3

LED 6" down lighter round 20 Watt

LED 6" down lighter round 15 Watt

Supplying and fixing of following electrical items suitable for operating on 240/230 Volts AC,50 Hz supply. including connection etc. as required. Exhaust fan 300 mm size (Heavy duty ) CG transfer or equivalent approved make

Exhaust fan 225 mm PVC Shutter type

Supplying, fixing, testing and commessioning ceiling fan of 1200mm sweep double ball bearings including connection etc, as required (C.G high speed model or equivalent approved make

Supply and fixing wall mounted fan (16" size) including connection etc. as per required

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheathin the existing surface/recessed steel/ PVC conducit as required

M/S GURMET TUNDUP GOVT CONTRACTOR

HIBA ENGINEERING AND CONSTRUCTION WORKS