SPECIAL REPAIR TO BLDG NOS 01 AND 03 CADETS LIVING ACCN AT NCC OTA, KAMPTEE.

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping screw complete all as per manufacturer instructions.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed (Note : GI frame work will be measured and paid for separately)

Fixing only GI powder coated snap grid framework for false ceiling complete all as specified and directed

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specifed and directed.

M & L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed

S&F wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12 mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam,chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M & L for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat of Primer and wall care putty complete all as specified and directed.

M & L for complete removal of Existing Treatment of old decorated wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

Material & Labour for complete removal of existing treatment of old decorated wall surfaces and applying two coat of cement base paint over a coat of cement primer

M&L complete removal of existing treatment including old plastered surfaces on wall including brooming down or steel wire brushing ,scraping down moulds , washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for door etc, as specified in SSR part-I, Sec-08, Clause 8.24(a), complete all as specified and as directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for windows, ventilators etc, as specified in SSR part-I, Sec-08, Clause 8.24(b), complete all as specified and as directed.

Supply & fixing butt hinges medium weight, cold rolled mild steel (ISI Marked) of 100mm size complete all as specified and as directed.

S&F 150 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of primer to new wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparation of surfaces all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces all as specified and direcet.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed

M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and directed.

Demolition of un-reinforced cement concrete in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as complete all as specified and directed

Material & labour 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F in repairs fancy type curtain Rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. .

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

M & L for two coats of brush bond liquid compound of make Sika/fosroc or its equvalent water proofing coating over plastered surfaces of any portion (Sika/Fosroc chemical Ltd) complete all as per manufacturer instructions and complete all as specified and directed

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed. ~

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size including dummy switches wherever required complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item Sl No 48 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

All as per item Sl No 48 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

All as per item Sl No 48 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

All as per item Sl No 48 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. PVC Conduit Make : Polycab,Modiplastr, Finolex. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: V guard/legrand/ Crabtree.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. Make: V guard/legrand/ Crabtree..

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: V guard/legrand/ Crabtree..

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: V guard/legrand/ Crabtree..

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed. Make: V guard/legrand/ Crabtree.

Supplying and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make : Philips/Havells/Jaquar/Shakti

Removing of existing light fitting any type including disconnecting of supply anf refixing the same to other location where directed

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completE all as specified and directed. Make : Philips/Havells/Jaquar/Shakti

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : Philips/Havells/Jaquar/Shakti

Supply and fix sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door. Make-Legrand/ L&T/ Havells.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. Make:-Legrand, L&T, Havells..

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Havells

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 93,754.00]

M/s Jagdish Staioners and General Stores

DE PRETTY AND CO

M/s B S Jain

M/s M.G. Hargunani

M/s Shrangi Rishi Construction

NORTH INDIA PEST CONTROL

Devika Constructions

M/s DS Khekde

AK CONSTRUCTION

S D WAGHAMSHI

S. D. ENGINEERS

Bidder Name

M/s Shrangi Rishi Construction

DE PRETTY AND CO

S D WAGHAMSHI

raghuveer constructions

M/s B S Jain

M/s DS Khekde

Devika Constructions

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

AK CONSTRUCTION

S. D. ENGINEERS