SPECIAL REPAIR TO KITCHEN PANTRY AND ALLIED SERVICES IN BLDG NO P 1255 AND CERTAIN REVENUE AND MINOR WORKS AT BB CANTT SRINAGAR

Amount

Taking down shutters exc 1 sqm and n.exc 2 sqm each and removing from site complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each and removing from site complete all as specified and directed.

Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.

S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 track and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F aluminium anodised windows & ventilators shutters, sliding type without sash bar, powder coated of any colour (Thickness of powder coating not less than 50 micron) aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles, hinges, anodised aluminum snap beading screws, handle, locking arrangement etc. complete all as specified and directed.

S&F aluminium anodised window and ventilator shutterspowder coating of any colour (Thickness or powder coating not less than 50 micron , fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc. complete all as specified

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 6mm thick Non Asbestos fibre cement designer board /Pre Laminated self embosssed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.

S&F 12mm thick Block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including required teak wood lipping all as specified and as directed.

S&F 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern including necessary fillets/ cornices as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F butt hinges medium weight 100 mm size colled rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 100 mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm when open all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:4) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) dark shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface of size 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 12mm thick toughned glass as in hinged door, partitions automatic door with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design in printing of unit logo and unit name over the glass at door as approved by GE complete all as specified and directed.

S&F 10mm thick toughned glass as in hinged door, partitions, with necessary long solid fency handle, suitable hinges, locking arrangment, hydraulic floor spring as required, design as approved by GE complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid bedded in any mortar complete all as specified and directed

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

M&L for Machine cut cudappah stone slab 20-25mm thick laid over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding edges complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 40mm thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging where required, complete all as specified and directed.

S&F in repairs sinks with drainage board (double bowl) made of stainles steel 1 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, each bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling old unserviceable water tanks complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.

M&L for PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M&L for RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork complete all as specified and directed.

M&L for precast RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, including use and waste formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc complete all as specified.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified.

S&F in repair cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia of outlet complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 100mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

S&F in repairs 75mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

S&F in repairs 50mm bore, spun pipes, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, walls including necessary bends, fittings, stack clamp etc complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces complete all specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M&L for applying 2mm thick wall care white putty after complete removal of existing treatment from old plastered surfaces and to obtain smooth/even finish using sand paper complete all as specified and directed.

M&L for preparation of old plastered/treated surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Khatamband pattern false ceiling, design as approved with ornamental wood work made out of 1st class soft wood (deodar) including necessary repair/replacement of hard wood frame work & hangers/fillets /cornices and 12mm thick BWR plywood and finally finished with french polish (two or more coats) complete all as specified and directed.

S&F 15mm thick 1st class soft wood Australlian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9mm thick plywood BWR fixing on walls and two coat of varnishing, polishing and preparation with sneezing complete all as specified and directed. Note: Rates for disconnecting of electrical connections from main DB and removing all switch socket, sheet metal enclosures and fittings & fixtures and refixing the same and makig electrical connections as directed after completion of work deemed to be included in quoted rates.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

S&F 25mm dia stainless steel drapery rod, heavy duty, fancy type with brackets & domes two in each door and window complete all as specified and directed.

Supply and placing in position SFRC manhole cover of size 750mmx750mmx70mm thick complete all as specified and directed.

Supply and placing in position SFRC manhole cover of size 900mmx900mmx70mm thick complete all as specified and directed.

Supply and placing in position SFRC manhole cover of size 1200mmx700mmx70mm thick complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position unframed work complete all as specified.

S&F 2nd class hard wood, fancy type, plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 3.0 Sqcm and n exc 6.0 Sqcm complete all as specified and directed.

S&F 18/19mm thick Block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work all as specified and as directed.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm thick teak wood edging with rebate suitable for cup board shutter, pelmet box etc. and leaping treated with french polish complete all as specified and as directed.

S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer complete all as specified and directed.

S&F 100mm size brass handles, cast type, polished bright fixed with brass screws complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site in suitable frame complete all specified and directed. Note: Rates for disconnecting of electrical connections from main DB and removing all switch socket, sheet metal enclosures and fittings & fixtures and refixing the same and makig electrical connections as directed after completion of work deemed to be included in quoted rates.

S&F 100mm size butt hinges cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S&F 150mm size extruded brass handles fabricated type, polished complete all as specified and directed.

S&F 100mm size brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed.

S&F 250mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

M&L for preparation old treated surfaces of ceiling and applying one coat of oil bound distemper complete all specified and directed.

S&F Hat and coat hooks, solid body, aluminium of size 175mm to 250 mm complete all as specified and as directed.

S&F 20mm dia powder coated drapery rod, bright finish & decorative side domes, brackets and minimum 8 Nos curtain rings per RM of length complete all as specified and directed.

M/S Tajamul Ah Buchh