PROVN OF HARD STANDING AND APCH RD TO CERTAIN SWT AND STORAGE SHEDS AT FOD UNDER GE (SOUTH) UDHAMPUR

Amount

BUILDING WORK (SCHEDULE 'A' PART-I) Lump sum price worked out by the Contractor for “Building Work” as listed in Schedule ‘A’ Part- I.

INTERNAL ELECTRIFICATION (SCHEDULE 'A' PART-II)(SEC-I) Lump sum price worked out by the Contractor for “Internal Electrification” as listed in Schedule ‘A’ Part- II (Sec-I).

INTERNAL ELECTRIFICATION (SCHEDULE 'A' PART-II) (SEC-II) SCHEDULE `A' PART-II, Sec-II is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

Slim linear LED lighting fixture 20 Watt LED Batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, CRI ≥ 70, PF ≥ 0.9, Surge protection upto 2.0 kV, shatter proof opal sheet of polycarbonate diffuser with system efficacy ≥ 100 Lm/watt, operating voltage 170-240 volts, colour temp 6500K, Low heat generating LED (Make of LED shall be Cree/Nichia/Osram) complete making all connections using 1.5 Sqmm copper conductor multi strand PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as per the directions of Engr-in-Charge. Note:- A certificate from the manufactures for warranty minimum upto 2 years shall be obtained and submitted to the AGE/GE.

MCB SPN, 40 to 63 Amps, 240 Volts including providing copper thimbles for outgoing cable, complete all as specified and as directed by Engr-in-Charge.

MCB SP, 6 to 32 Amps,240 Volts including providing aluminuium thimbles for outgoing cable, complete all as specified and as directed by Engr-in-Charge.

Sub main wiring with two runs of 10 Sqmm ( 2x10 sqmm ) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor conforming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia medium grade (ISI marked) with all conduit accessories mounting on suface of walls /roofs / ceiling etc with one run of 6 Sqmm (1x4sqmm ) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, complete all as specified and directed by Engr-in-Charge. Note:- 2 runs of 10 Sqmm (2x10sqmm ) ,one run of 6 Sqmm (1x6 sqmm ) cable and one metre of conduit will be measured as one unit.

Sub Total

ROAD (SCHEDULE 'A' PART-III) (SEC-I) Lump sum price worked out by the Contractor for “ROAD” as listed in Schedule ‘A’ Part- III .

ROAD (SCHEDULE 'A' PART-III) (SEC-II) SCHEDULE `A' PART-III, Sec-II is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

Preparation of any type of surfaces and applying Thermo plastic road marking paint as white/yellow colour of width up to 100 mm confirming to Ministry of surface transport (MORTH) specification for road and bridge work: 3d revision manufacturer instruction including glass beads (intermix) Type-1 (most/BS6008A) and provision contained in IRC-35/1997, complete all as specified and directed by GE/Engr-in- Charge. Make: Asian or equivalent.

Sub Total

EXTERNAL ELECTRIFICATION (SCHEDULE 'A' PART-IV)(SEC-I) Lump sum price worked out by the Contractor for “External electrification” as listed in Schedule ‘A’ Part- IV .

EXTERNAL ELECTRIFICATION (SCHEDULE 'A' PART-IV) (SEC-II) SCHEDULE `A' PART-IV, Sec-II is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

Supply and fixing LED Street Light fitting 30 Watt, New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, powder coated, pressure die cast aluminium compact high power LED tube light with heat resistant toughened Glass, Corrosion resistant, isolated driver low heat generating LED (Make of LED shall be CREE/Necia/Osram) including nuts, bolts, washers with suitable size/dia 40mm GI pipe bracket for fixing of street light including making all connection, complete all as per the direction of Engg-in-Charge. Note: A certificate from the manufactures for warranty minimum upto 2 years shall be obtained and submitted to the AGE/GE.

Sub Total

AREA DRAINAGE (SCHEDULE 'A' PART-V) Lump sum price worked out by the Contractor for “Area Drainage” as listed in Schedule ‘A’ Part- V.

ALUMINUM PARTITION AND DUNNAGE (SEC-I) (SCHEDULE 'A' PART-VI) Lump sum price worked out by the Contractor for “ALUMINUM PARTITION AND DUNNAG” as listed in Schedule ‘A’ Part- VI.

ALUMINUM PARTITION AND DUNNAGE (SCHEDULE 'A' PART-VI) (SEC-II) SCHEDULE `A' PART-VI, Sec-II is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

S&F glazed anodised ( 15 micron ) powder coated Aluminum door made out of extruded section as standard door frame , single groove of size 100 x 45 x 2.5 mm thick standard shutter top and bottom section of size 95 x 45 x 2.5mm thick standard shutter vertical section of size 80 mm x 45 mm x 25 mm thick complete with auto hydraulic floor mounted door closer handle special cylindrical lock , neoprene dry set rubber gasket , with 12m thick prelaminated ( both side ) particle board and 5mm thick plain glass, Complete all as specified. Note : All fitting shall be of ISI marked except cleats) sizes of each door shall be as per site requirement all as directed and specified.

S&F glazed anodized ( 15 Micron ) powder coated aluminium partition made out of aluminium extruded section frame ( 100mm x 45mm x 2 mm ) completely with rubber gasket , partly glazed with 5mm thick plain glass and partly panelled with 12mm thick prelaminated particle board ( both side laminated ) complete all as specified and as directed. ( Note : 5mm plain glass and 12mm thick particle board is deemed to be included in the unit rate )

4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm 605mm including all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, complete all as specified and as directed by Engr-in-Charge.

Sub Total

FIRE POINT (SCHEDULE 'A' PART-VII) Lump sum price worked out by the Contractor for “FIRE POINT” as listed in Schedule ‘A’ Part- VII.

EARTH WORK AND SITE CLEARANCE (SCHEDULE 'A' PART-VIII) Lump sum price worked out by the Contractor for “Earth work and site clearance” as listed in Schedule ‘A’ Part- VIII.

bamral builder

jyoti parkash sharma

M/S Inderjit Sharma and Co.