SUDA

Brick masonry 230 mm thick for panel walls in superstructure with CM (1:6) proportion using II nd class country bricks of size 23×11×7 cm from approved source having crushing strength not less than 35kg/sqcm including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales and other taxes on all materials and all operational, incidental and labour charges such as mixing cement mortar, curing scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901, 903 & 904)

Supply and fixing of double Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 25 mm thick conforming to IS:2202 thick as per approved design with fixtures of, Stainless Steel Aldrops 300mm-1 no, 125mm long MS iron butt hinges 4 No's, 150mm long MS coated Tower bolts 1-no's MS iron coated fancy handles 150 mm-2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Supply and fixing of double Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 25 mm thick conforming to IS:2202 thick as per approved design with fixtures of, Stainless Steel Aldrops 300mm-1 no, 125mm long MS iron butt hinges 4 No's, 150mm long MS coated Tower bolts 1-no's MS iron coated fancy handles 150 mm-2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25×3 mm Butyl tape. The sheets are provided with anti capillary

Supply, Transportation, laying, testing & commissioning of 'B' class heavy duty GI pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, clamps, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of approved colour etc.

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (copper tube sizes 1/4" to 2") Ashirvad Flowguard SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and Cold Water confirming to (IS 15778-2007)

Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (copper tube sizes 1/4" to 2") Ashirvad Flowguard SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and Cold Water confirming to (IS 15778-2007)

Supplying and fixing of SWR/PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/Sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326)

Supplying and fixing of SWR/PVC pipes (as per ISI standards) 4 Kg/Sq.cm. Prince/Sudhakar or any ISI brand and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326)

Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal/external threaded connection conforming to IS 8931 including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.

Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Cost, Supply and fixing of different sizes of modular Galvanised metal Boxes including cost and conveyance of all materials and labour charges etc complete.

Cost, Supply and fixing of different sizes of 8 / 12 Modular Horizontal / Vertical Cover Frame of Anchor Roma including cost and conveyance of all materials and labour charges etc complete.

Supply and run of 1 of 14/0.30 (1.0 Sq.mm) P.V.C. insulated flexible copper cable in existing pipe for Earth Continuity including all labour charges etc. complete.

Supply and run of 2 of 36/0.30 (2.5 sq.mm) FRLS / HFPR PVC insulated 1100 V grade as per IS: 694 / 1990 specifications for flexible copper cable for existing pipe for Mains including all labour charges etc., complete.

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.

Supply and fixing of 6A 5 pin Modular plug socket with 6A Modular switch control on Box with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).

Supply and transportation of 20W +/- 10%, > / 2000 lumens, 1200mm length LED retro tube light, housing made with aluminium anodised body, wide operating voltage with double side connector, PF>0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI ≥80, etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Philips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / HPL / Eveready / Surya / Keselec / Arraystorm / GM / Goldmedal / Goldwyn / Fortune Art / Lighting Technologies.LED MAKE: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply and erecting ceiling fan 5 STAR RATED of Crompton / bajaj / havells /n make as per IS 374 - 1979 and with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete including cost and conveyance of all materials and labour charges etc., complete including 4% turnover tax on cost of all materials for finished item of work.

Supply and fixing of Stepped type Electronic Regulator duly fixing on existing block including giving connections cost of all accessories and all labour charges etc., complete.

Supply and fixing of 12 / 15 MS plain rod fan hook including all labour charges etc., complete.