Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC DAIRY FARM POST BOX NO 441 JUNGLIGHAT POST SRI VIJAYA PURAM 744103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹36.6 L+₹4.1 L (12.7%)Rejected-Finance DAIRY FARM JUNCTION VIJAY BAUGH ROAD SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹37.0 L+₹4.6 L (14.1%)Rejected-Finance 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹41.4 L+₹9.0 L (27.7%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹42.3 L+₹9.9 L (30.5%)Rejected-Finance C O AMBU HOTEL NEAR GOVT POLYTECHNIC DOLLY GUNJ PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
4 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BRICHGUNJ
GE BRICHGUNJ, PORT BLAIR
PROVN OF MOSQUITO PROOFING AND PROVN OF UPVC PARTITION, WINDOW WITH SHUTTER AT LAMBALINE UNDER GE BRICHGUNJ PORT BLAIR
2024_MES_645340_1
8454A
Open Tender
Civil Works
Item Rate
180 days
GE BRICHGUNJ
AS PER NIT
9 documents required · 9 mandatory
₹500
GE Brichgunj
₹67,000
Yes
22 May 2024
6 Mar 2024
6 Apr 2024
6 Mar 2024
4 Apr 2024
23 Mar 2024
Amount
S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections Hinges, handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed
S&F 100mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and as directed
S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed
S&F Stainless steel IMAX hinges for aluminium window shutters all as specified complete all as specified and as directed
S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed
S&F floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed
M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed
M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete all as specified and as directed
S&F GI frame work for PVC ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with Gleat and steel expansion fasteners with and including wall section of 0.55 mm thickness having kurled web of 50 mm and flange of 28 mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre fixed with joining for ‘J’ trim & ‘T’ Section including hanging of 6 mm dia GI (upto 1200 mm length) adjusting level finished to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and as directed
S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions.
S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions.
Supply & fix 6.3mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
M&L for Preparation of New plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .
M&L for complete removal of existing treatment on walls and applying one coat of Putty to make the wall surface in plumb line and applying two coats of Plastic emulsion paint over a coat of primer complete all as specified and as directed .
S&F aluminium composite panel sheet of 3mm to 4mm thick, fixed on aluminium frame work for door/ Window and Cup board works fitted with Rubber Cascade strips complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers n.exc 25 cm, watering and removing surplus soil to a distence n.exc 50 m and making good surface.
M&L PCC 1:3:6 Type type C2 (1:3:6) (40 mm graded stone aggregate) as inCement concrete in foundations,filling and mass concrete all as specified and directed.
M & L for 100mm thick PCC Type D-2 (1:4:8) Using 40 Mm graded stone Agg as in flooring of Heavy veh parking of Hard standing all as specified and directed.
M & L for 100mm thick PCC Type B-2 (1:2:4) Using 40 Mm graded stone Agg as in flooring of Heavy veh parking of Hard standing all as specified and directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E250 Quality B complete all as specified and directed.
S&F steel works in tubular/ posts/ trusses/ purlin including special shaped washer etc. complete using ERW or onduction butt welded tubes conforming to IS 1161-1797 grade St 240.
M & L For prepatring steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.
S&F 0.50 mm thick pre painted galvalum aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
S&F 0.50 mm thick pre painted galvalum aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using 2% of WPC
M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for taking out or laying of pipes / cable of any size in Soft/ loose soil complete all as specified and as directed.
Returning filling in including spreading leveling watering and well ramming in layers n.exc. 25cm in any type of soil complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed.
Cutting the existing water main of 110 mm outer dia including all jointing materials as required and excavation, earth work complete.
Supply and laying in trenches or on pedestal wherever required , jointing , testing and commissioning of ISI marked 110 mm outer dia HDPE pipes of pressure rating 10 kgf/cm2 including necessary clamps as required at site all as specified and as directed.
S & F of Sluice Valve, Cast Iron body, Stainless Steel Spindle, Gun Metal Rings including Wheel for operation, Flanged and Drilled, size 100 mm bore, confirming to IS - 14846, Class PN -1.6, Long Body type including necessary flanged for fixing with 110 mm outer dia HDPE pipes and all Jointing materials like flanged socket, spigot etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in coping, foundation, support for HDPE Pipe (including necessary form work) complete, all as specified and as directed by Engr-in-Charge.
M&L for Construction of Brick Masonry valve chamber of size 900x900x 900mm (Internal dimensions) with PCC 1:4:8 foundation 150mm thick, brick work built in CM 1:6, PCC 1:3:6 coping 50mm thick, plastering 15mm thick in CM 1:6 to all internal and exposed surfaces including excavation earthwork in hard/dense soil, MS sheet cover 4mm thick with locking arrangement embedded in PCC and painting to MS cover with two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.
S&F in repalacement non return valve with flanged ends of any pattern with bypass arrangement and ISI marked including jointing materials and necessary joints and nut bolts with washer for flanged ends of size 100 mm complete all as specified and as directed.
Sree Tirumala Enterprises
Island Agency
KBR CONSTRUCTIONS
City Constructie Pvt Ltd
PALANI ENTERPRISES
excellent Enterprises
K R PRAVEEN KUMAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .