QUANTUM OF WORKS INVOLVED IN Contraction of 11 KV new Line requried for connecting Village on 11 KV Achalgang/Harha Feeder 33/11 KV Sub Station Achalgang, EDSD-III Banthar under Divison-II, Unnao aginest Package No. 90/EDC(U)/D-2 in Business Plan Yea

Amount

Safe Carrage of following Materials from ESC Store Center Unnao to work dump site along with loading unloding & proper stockingas per requirment.

Carriage of PCC/ST Pole

ACSR Weasel Conductor.

ABC 3X50 Sq.mm.

ABC 3X95 Sq.mm.

Distribution Transformer 25 KVA

Distribution Transformer 63 KVA

Distribution Transformer 100 KVA

Distribution Transformer 400 KVA

Loose line mattrial store to dump site with loading unloding and proper stocking.

Erection of Single Pole on 8.5/11 mtr. STPCC with fixing of necessary clamps and other accessories required for stringing along with plinthing & grouting of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level.

Fabrication, Erection of Sub-Station type Double Pole on 8.5 mtr. long S.T.P/P.C.C. pole with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) one No., Dropper Channel 100X50 mm. (2028 mm long) 01 Nos. with arrangment of fixing of 06 Nos. Pin Insulator. Sub-Station base angle of 65X65X6 mm. (2250 mm.) channel 02 Nos. Grouting with cement, sand and brick ballast in ratio 1:4:8 making plinth upto width of 300 mm. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect.

Earthing of PCC poles as per RESPO norms

Grouting and nozzeling and plinthing of Stay set complete of size 16X1800 mm. with stay insulator and other related hard ware items.

Stringing & sagging of 3 phase 3 wire 11 K.V. New line on ACSR Weasal conductor as per RESPO specification and direction on E/I . Conductor shall be supplied by department.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Fixing of 3 phase distribution box/Kiosk on the L.T. Poles including all clamps and material required for mounting connection and sealing.

Construction of masonary type plinth suitable for Transformer of the size of 2X2X1.5 Mtrs with complete civil material & 02 Nos.,125X65 mm, M.S Channel 2.0 Mtr. long and M.S Twisted Bar size 30 mm complete in all respect as per RESPO norms.

Erection of following T/F on pole by laying of cable ,Jumpering & commissioning of T/F including Earthing of distribution T/F for body & neutral.

Distribution Transformer 25 KVA

Distribution Transformer 63 KVA

Distribution Transformer 100 KVA

Placement of 400 kVA Transformer on plinth, making LT & HT side conections by fixing of Lugs, L-pieces and other materials required for completion of work including eathing of T/F for body & neutral carriage of Transformer from store to site.

Fabrication, erection & earthing of wire mesh (50X25 mm 10 SWG) fencing of the size of 5mx3mx2m (LxBxH) with a gate and with retaining wall including grouting of fabricated M.S. Angle 65x65x6 mm. support (05 Nos. in a Sub-Station). Painting of fencing/support with red oxide & synthetic enamelled paint as per specifications, complete in all respect.

Dismantling of Transformer Safe loading, unloading Carriage from site to JE dump Store/ESC Store Center Unnao.

Distribution Transformer 16 KVA

Distribution Transformer 25 KVA

Distribution Transformer 250 KVA

Dismantling old iron scrap stacking & transpiration of these materials form site to JE dump store/ESC store Center Unnao.

Dismantling old conductor/Cable and rolling back including stacking & transpiration of these materials form site to JE dump store/ESC Store Center Unnao.

M/S ANANDESHWAR ENTERPRISES

M/s PRAMENDRA SINGH

Pankaj Trading Company