Renovation & Upgradation of BSFC Head office Situated at the 8th Floor

INFRASTURUCTURE DEVELOPMENT AUTHORITY First Floor, Udyog Bhawan, East of Gandhi Maidan, Patna

TECHNICAL BID SHEET

TENDER NUMBER 23/TEN/IDA/26 DATE OF ISSUE OF TENDER 19.08.2026

NAME OF WORK Renovation & Upgradation of BSFC Head office Situated at the 8th Floor के कार्य | COST OF WORK AS PER BOQ Rs. 46,061,909.00

BID SECURITY (EARNEST MONEY DEPOSIT) AMOUNT Rs. 921,500.00 COMPLETION PERIOD IN MONTHS 6.0

NAME OF TENDERER ALL COLOURED CELL IS TO BE FILLED ACCORDINGLY

ADDRESS, E-MAIL & MOBILE NUMBER OF TENDERER

S.N. ITEMS REQUIREMENT REMARKS

1 REGISTRATION (Any Contractor Registered in appropriate category with Central Government / Any State Government / Any Public Sector Undertakings or an Agency of National or International repute may tender but Registration with Infrastructure Development Authority will be essential after issue of Letter Of Acceptance.) Department

Registration No.

Date of Validity

2 ELECTRICAL LICENSE REGISTRATION Attach Valid Self Electrical License Or Sub Contractor's Electrical License With Affidavit (Attach An Affidavit As Per Format Prescribed In SBD-Annexure III, On Or After Date Of Tender, Duly Attested By An Executive Magistrate). Department

Registration No.

Date of Validity

3 LEGAL STATUS OF BIDDER Section 1 ITB 4.3 (a) of S.B.D (i) Individual/Partnership/Pvt. Ltd./Public Ltd/Joint Venture

(ii) Place of Registration.

(iii) Principal Place of Business

(iv) Power of Attorney of Signatory Bid

4 PERMANENT ACCOUNT NUMBER (PAN) Attach Copy of PAN

5 GST REGISTRATION Attach Copy of GST

6 COST OF BOQ (e payment only) Rs. 11,800.00 (Attach e-payment receipt of BOQ)

7 EARNEST MONEY DEPOSIT (BID SECURITY) Earnest Money Deposit (Bid Security) will be accepted only in online mode (Internet Payment Gateway). No other forms of Earnest Money Deposit (Bid Security) will be accepted. Amount To Be Entered (Rs. In Lakhs) Attach e-payment of Earnest Money Deposit (Bid Security).

8 WORK EXPERIENCE OF SIMILAR NATURE (Interior Work) Section 1 ITB 4.5 (A) (b) of SBD The completion certificate shall be issued by employer not below the rank of Executive Engineer or Equivalent.

9 QUANTITY WISE EXPERIENCE Section 1 ITB 4.5 (A) ( c ) of SBD MINIMUM QUANTITY / AMOUNT AS PRESCRIBED IN SBD

RCC+PCC : 28.23 Cum

BRICK WORK : 23.00 Cum

Electrical Work : Rs. 28,47,762.00

HVAC Work : Rs. 31,04,386.00

PHE Work : Rs. 5,83,382.00

Fire -Fighting Work : Rs. 23,73,779.00

Furniture Work : Rs. 68,73,580.00

10 ANNUAL FINANCIAL TURN OVER OF LAST FIVE YEARS ITB Clause 4.5 (A)(a) (Balance Sheet, Profit & Loss And Audit Report Duly Audited By CA) FY 2021-2022 Amount To be entered (Rs in Lakhs)

FY 2022-2023 Amount To be entered (Rs in Lakhs)

FY 2023-2024 Amount To be entered (Rs in Lakhs)

FY 2024-2025 Amount To be entered (Rs in Lakhs)

FY 2025-2026 Amount To be entered (Rs in Lakhs)

11 BANKER'S CERTIFICATE EVIDENCE OF ACCESS TO OR AVAILABILITY OF CREDIT FACILITIES (10% OF PROJECT COST) Section 1 ITB 4.2 ( i ) of S.B.D Certificate Issued By Bank As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender

12 BIDDING CAPACITY (BC=A*N*3-B) Section 1 ITB 4.7 of S.B.D A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the price level of the year indicated in Appendix) taking into account the completed as well as works in progress. N = Number of years prescribed for completion of the works for which bids are invited. B = Value (updated to the price level of the year indicated in Appendix) of existing commitments and on-going works to be completed during the next 06 Months(period of completion of the works for which bids are invited).

13 (A) AMOUNT OF EXISTING COMMITMENTS AND ONGOING WORKS Attach As Per Sec. 2- 1.4 (A) Of SBD, On Or After Date Of Tender (Bidder must decleare themselve their all exising commitment concealment of any fact shall be sufficient cause for rejection)

(B) AMOUNT OF WORK FOR WHICH BID ALREADY SUBMITTED Attach As Per Sec 2- 1.4 (B) Of SBD, On Or After Date Of Tender

14 AFFIDAVIT (I) Attach An Affidavit As Per Format Prescribed In Sec-2 Of SBD, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

(II) Attach An Affidavit As Per NIT, On Or After Date Of Tender, Duly Attested By An Executive Magistrate.

15 CHARACTER CERTIFICATE Attach a Valid Character Certificate of Tenderer Issued By Competent Authority.

16 UNDERTAKING (i) Investment of minimum cash up to 25% of the value of the work during implementation of the contract. Section 1 ITB 4.2 (ii) of SBD (I) Attach An Undertaking As Per Format Prescribed In Sec. 2 Of SBD.

(ii) Bid Validity : 120 days Section 1 ITB 15.1 of SBD (II) Attach An Undertaking As Per Format Prescribed In Sec. 8 Of SBD.

17 LITIGATION HISTORY Section 1 ITB 4.3 ( j ) of SBD As Per Format Prescribed In Sec. 2-1.11 Of SBD On Or After Date Of Tender.

18 PROPOSED METHODOLOGY AND PROGRAMME OF CONSTRUCTION Section 1 ITB 4.3 ( l ) of S.B.D Attach Descriptions,Drawings And Charts As Necessary.

19 TECHNICAL PERSONNEL Section 1 ITB Clause 4.5 B (b) Attach As Per Sec-2-1.6 Of SBD. Attach Necessary Certificate And Current Affidavit Of Both Employee And Employer On And After Date Of Tender, Duly Attested By An Executive Magistrate.

20 LIST OF KEY PLANTS & EQUIPMENTS Section 1 ITB 4.5 B (a) Attach As Per Sec 2-1.5 Of SBD (Max. Age 5 Years). Attach Owned Voucher/Cash Memo/Invoice And Affidavit In Case Of Leased/Hire On And After Date Of Tender, Duly Attested By An Executive Magistrate.

I, the undersigned, do hereby certify that all the statements made in the required attachements are true and correct.

Earnest Money Rs.

Bid Document Cost Rs.

Time of Completion months

Sl. No. Quantity Unit Rate Amount

11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement motar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.

A 11.41A.2 Glazed Vitrified floor tile polished finish of size

11.41A.2.2 Size of Tile 600 x1200 mm (for wall toilet) &198 x 1200 mm (for floor meeting room) sqm 1356

B 11.41A.3 Glazed Vitrified tile Matt/ Antiskid finish of size

11.41A.3.1 Size of Tile 600 x 600 mm (for floor toilet) sqm 1054.3

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete.

11.41.3 Size of Tile 80x80 cm. sqm

Add/Deduct for levelling of floor using 20 mm thick cement mortar sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm sqm

Extra for providing edge moulding to 19 mm thick marble stone counters, Vanities etc. over item no. 8.2 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite work

8.3.2 Granite work Mtr.

26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.

26.27.2 With 20mm thick beveled tegular mineral fibre false ceiling tile (NRC0.7). Sqm. 2120.7

12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.

12.5 mm thick tapered edge gypsum moisture resistant board Sqm

Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. Sqm

Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:

9.1.1 Second class teak wood cum

Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

9.127.2 1.0 mm thick sqm

Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.

9.74.1 250 x 10 mm Each

Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. Each

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (best make of approved quality) with necessary accessories and screws etc. complete. Each

Providing and fixing 12 mm thick frameless toughened glass door shutter/partition of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer -in- charge ( Door handle , lock, and stopper etc . to be paid separately). Sqm

Providing and fixing double action hydraulic floor spring of apporoved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body/ plate with duble spring mechanism and door weight upto 125 kg, for doors, inculding cost of cutting floors, embedding in floors as reqired and making good the same matching to the exisiting floors finising and cover plates with brass pivot and single pece M.S sheet outer box slide plate etc. complete asper the direction of Engineer-in - charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thinckness Each

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG GI sheet ( Zinc coating not less than 120gm/m²) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes Fire Rated Door Shutters. The frame is fitted with intumuscent fire seal trip of size 10x4 mm minimum alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per directions of Engineer - in- charge . (Dash fastener to be paid for separately). Mtr.

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 min Fire Rating confirming to IS:3614 (Part II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles,lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120gm/m²) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). Sqm

Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators & partitions etc., with G.I. beading of appropriate size,made out of 20 SWG G.I. sheet (zinc coating not less than120 gm/m²)fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc, complete in all respect as per direction of Engineer-incharge.(Actual glass size is to be measured at site for payments).

9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance Sqm

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Each

6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A cement mortar 1:6 (1 cement : 6 coarse sand) cum

6.3A Extra for Brick work in superstructure above plinth level upto floor V cum cum

6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in:

6.18.4A cement mortar 1:4 (1 cement : 4 coarse sand) Sqm.

6.19A Extra for half Brick masonry in superstructure above plinth level upto floor V level. Sqm.

6.21A Extra for providing and placing in position 2 Nos, 6mm dia, MS bars at every third course of half brick masonry (with F.P.S. brick) Sqm.

Cement plaster in course sand 12mm cement plaster of mix :

13.11.2 1:4 (1Cement : 4 Coarse sand) Sqm.

14.1.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per direction of E/I. Cement mortar 1:4. Sqm. 283.3

Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repair scratches etc. complete sqm

13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

13.92.1 Two or more coat on new surface. Sqm

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.

9.48.1 Fixed to steel windows by welding. kg

Painting with sythetic enamel paint of approved brand and manufacture to give an even shade.

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Sqm.

Dismantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage holdfasts etc.complete and stacking within 50 metres lead:

15.12.2 Of area beyond 3 sqm Each

Dismantling tile works in floor and roofs laid in cement mortar including stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and upto 40 mm Sqm

Demolishing R.C.C work including stacking of steel bars and disposal of unserviceable materials within 50 metres lead : cum

Demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead :

15.7.4 In cement mortar cum

Disposal of building rubbish/malba/similar unserviceable,dismantled or waste waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work upto plitn level: 1:2:4(1Cement :2 Coarse sand:4 graded tone aggregate 20mm nominal size) cum

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). cum

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding complete.

A 5.22.7A Thermo-Mechanically Treated barsTMTC-500-8mm dia Kg.

B 5.22.7B Thermo-Mechanically Treated barsTMTC-500-10mm dia Kg.

Centering and shuttering including strutting,propping etc and removal of form for:

B 5.9.3 Suspended floors, roots, landings, balconies and access platform sqm

C 5.9.5 Lintels,Beams,Plinth beams,girders,bressumers and cantilevers. sqm

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and thelike consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3 (iii) litrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area. (iv) lvth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). sqm

Demolishing mud phaska in terracing and disposal of material within 50 mtr lead. cum

EXTRA FOR MATERIALS

E Add for Cement 74 MT 265.41

F Add for Bricks 27058.5 Per 1000 1606.89

S.H. - I : SANITARYWARE & C.P FITTINGS

17.1 Providing and fixing white vitreous china water closet squatting pan (Indian type WC pan) with 100mm sand cast Iron P or S Trap, 10 litre low level PVC flushing cistern (of approved make) with fittings CI/MS brackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

17.1.1 White vitreous china Orissa pattern WC pan of size 580 x 440mm with intergal type foot rests. 1 Each 4470.9

17.3 Providing and fixing white vitreous china pedestal type water coset (Europenan type) with seat and lid , 10 litre low level white vitreous china flusing cistern & C.P flush bend with fittings & C.I.brackets , 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municiple desine complete, including painting of fittings and brackets ,cutting and making good the wall and floiirs wherever required.

17.3.1 W.C pan with ISI marked white solid plastic seat and lid 2 Each 5504.3

17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 4 Each 3932.1

17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever as required. :

17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth 250 mm 1 Each 5231.5

17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

17.28.2 Flexible pipe

17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. 5 Each 1068.5

17.34 Providing and fixing toilet paper holder :

17.34.1 C.P.brass 3 Each 550.7

17.7 Providing and fixing PTMT Bottle Trap for wash basin and sink,

17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of waste coupling 77 mm breadth with 25mm minimum water seal, weighting not less than 260gms 6 Each 325.1

17.70.2 Bottle trap 38mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of waste coupling 77 mm breadth with 25mm minimum water seal, weighting not less than 263gms 2 Each 325.1

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 2 Each 146.3

17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 2 Each 204.7

17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 3 Each 6534.2

8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and

8.10.2 Granite Stone of approved shadeIProviding and fi 2 Sqm 3542.9

18.21 椠桴⁥慰敮潢牡Ɽ洠歡湩⁧潣湮捥楴湯攠捴愮⁳敲畱物摥ਮș匀灵汰楹杮愠摮映硩湩⁧景映扡楲慣整⁤汅捥牴捩污挠湯牴汯瀠湡汥漠⁦畣楢汣⁥潣獮牴捵楴湯‬汦潯⁲ 慷汬洠畯瑮摥琠灹ⱥ映扡楲慣整⁤畯⁴景ㄠ‶坓⁇剃䅃猠敨瑥‬潣灭牡浴湥慴楷桴栠湩敧⁤潤牯ⱳ瀠睯敤⁲潣瑡摥瀠楡瑮湩⁧景愠灰潲敶⁤桳摡⁥晡整⁲‷慴歮琠敲瑡敭瑮瀠潲散獳‬慣汢⁥污敬ⱹ椠瑮牥慮楷楲杮攬牡桴湩⁧整浲湩污⁳畂⁳‭慢⁲档浡敢Ⱳ椠獮汵瑡牯愠摮挠浯汰瑥⁥湩愠汬爠獥数瑣攠捴愠摮瀠湡汥洠湡晵捡畴敲獲洠獵⁴敢愠灰潲敶⁤祢䌠剐⁉䈨瑵眠瑩潨瑵删䉙†湩楤慣潴Ⱳ愠浭瑥牥瘬汯浴瑥牥‬湩整⁲潣湮捥楴湯挠灯数⁲潣摮捵潴⁲慣汢⽥潳楬⁤潣灰牥猠牴灩‬睳瑩档敧牡⁳瑥⹣ŋ匀灵汰楹杮愠摮映硩湩⁧〲流⁰㐲‰潶瑬⁳偓⁎椠摮獵牴慩祴数猬捯敫⁴畯汴瑥‬楷桴㈠瀠汯⁥湡⁤慥瑲ⱨ洠瑥污攠据潬敳⁤汰杵琠灯愠潬杮眠瑩⁨〲愠灭⁳✧❃‧畣癲ⱥ匠⁐䍍⁂湩猠敨瑥猠整汥攠据潬畳敲‬湯猠牵慦散漠⁲湩爠捥獥ⱳ眠瑩⁨档楡敮⁤敭慴潣敶⁲潦⁲桴⁥潳正瑥漠瑵敬⁴湡⁤潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤䔀剁䡔义㍇
牐癯摩湩⁧档浥捩污洯湩牥污洠楡瑮湥湡散映敲⁥慥瑲楨杮猠獹整潣灭楲楳杮漠⁦潣灰牥挠慯整⁤慥瑲⁨汥捥牴摯⁥″敭牴⁥敬杮桴愠摮ㄠ⸷′浭漠瑵牥搠慩愠潬杮眠瑩⁨㔲欠⁧慥瑲⁨潣摮捵楴楶祴攠桮湡楣杮戠捡楦汬洠湩牥污挠浯潰湵⁤潦⁲慥瑲⁨汥捥牴摯⁥潴映汩灵琠敨攠捸癡瑡摥攠牡桴愠摮攠牡桴椠獮数瑣潩楰⁴瑥⹣愠⁳敲畱物摥栮牐癯摩湩⁧湡⁤楦楸杮㈠‵浭砠㔠浭挠灯数⁲瑳楲⁰湯猠牵慦散漠⁲湩爠捥獥⁳潦⁲潣湮捥楴湯⁳攠捴‮獡爠煥極敲⹤䤀华䅔䱌呁佉⁎䙏䘠塉啔䕒⩓
畓灰祬湩⁧湡⁤楦楸杮㐠砧〲眠瑡⁴䕌⁄戠瑡整楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯椠污浵湩畩潨獵湩⁧湡⁤潣灭敬整眠瑩⁨湩整牧瑡摥攠敬瑣潲楮⁣牤癩牥攠捴‮楤敲捣汴⁹湯眠污⽬散汩楬杮椠据畬楤杮†潣湮捥楴湯眠瑩⁨⸱‵煳‮浭‮剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲瑥⹣愠⁳敲畱物摥‮䘨牯渠湯爭獥摩湥楴污戠極摬湩⥧Ħ匀灵汰楹杮愠摮椠獮慴汬瑡潩景爠来汵牡猯慴摮牡⁤潭敤⹁⁃挠楥汬湩⁧慦景ㄠ〲‰浭猠敷灥眠瑩⁨敳癲捩⁥慶畬⡥䵃䴯⥍業楮畭⸴〰‬楁⁲敤楬敶祲洠湩浩浵㈠〱挠浵洯湩椠据畬楤杮眠物湩⁧桴⁥潤湷爠摯⁳景猠慴摮牡⁤敬杮桴⠠灵潴㌠‰浣 楷桴ㄠ㔮猠⹱洠⹭䘠䱒⁓噐⁃湩畳慬整⁤潣灰牥挠湯畤瑣牯†瑥⹣愠⁳敲畱物摥خ⸸㜱ㄮÔ匀灵汰⁹湡⁤湩瑳污慬楴湯漠⁦〳‰浭猠敷灥洠瑥污楬⁣汢摡ⱥ敨癡⁹畤祴‬楳杮敬瀠慨敳‬㌲‰⁖⹁⹃攠桸畡瑳映湡椠桴⁥硥獩楴杮漠数楮杮椠据畬楤杮洠歡湩⁧潧摯琠敨搠浡条ⱥ挠湯敮瑣潩整瑳湩Ⱨ挠浯業獳潩楮杮攠捴愠⁳敲畱物摥昮畓灰祬愠摮映硩湩⁧潦汬睯湩⁧祴数⁳氠浡⁰湩攠楸瑳湩⁧汥捥牴捩污†楦瑴湩獧⼠映硩畴敲⁳瑥⹣愠⁳敲畱物摥‮㘀ㄮ㐮? ‹ 〱眠瑡⁴䙃⁌慬灭††††††††††††⠠慍敫㨠‭桐汩灩⥳㘀ㄮ㜮= 〲眠瑡⁴䙃⁌灳物污氠浡⁰†††††††††⠠慍敫㨠‭桐汩灩⥳唀䑎剅䜠佒乕⁄䅃䱂义片ࠀ⸳‵潣敲㤠‵煳‮浭堠偌⽅噐⁃湩畳慬整⁤噐⁃桳慥桴摥⠠效癡⁹畤祴 愠浲畯敲⁤汥捥牴捩挠扡敬眠瑩⁨污浵湩畩潣摮捵潴⹲  㜀ㄮ㈮"䄀潢敶㌠‵煳‮浭愠摮甠瑰㔹猠⹱洠ᩭ佔䅔⁌但⁒䱅䍅剔䍉䱁圠剏卋‘匀灵汰⁹湡⁤湩瑳污慬楴湯漠⁦〴洰Ɑ㈠〳⁶⹁⹃慷汬振扡湩映湡椠据畬楤杮映硩湩⁧桴⁥牢捡敫ⱴ慭楫杮挠湯敮瑣潩Ɱ琠獥楴杮‬潣浭獩楳湯湩⁧瑥⁣獡爠煥極敲⹤ľ匀灵汰⁹湡⁤楦楸杮猠牵慦散爠捥獥⁳潭湵整⁤潦汬睯湩⁧祴数⁳䰠䑅搠睯楬桧整⁲楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯椠牰獥畳敲搠敩挠獡⁴污浵湩畩潨獵湩⁧湡⁤湩整牧瑡摥攠敬瑣潲楮⁣牤癩牥攠捴‮搠物捥汴⁹湯挠楥楬杮椠据畬楤杮挠湯敮瑣潩楷桴ㄠ㔮猠浱剆倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲慣汢⁥湡⁤慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥Ԡ⸵⸷࠱⼵‷慷瑴㔀㜮㔮㄀‸慷瑴ſ匀灵汰楹杮愠摮映硩湩⁧敲散獳洠畯瑮摥†㘳眠瑡⁴䕌⁄汦瑡瀠湡汥㈠砠㈠映⁴楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯眠楨档瀠潲楶敤⁳潳瑦氠杩瑨愠摮朠慬敲映敲⁥祳浭瑥楲慣汩畬業慮楴湯猠極慴汢⁥潦⁲牡獭牴湯⽧牧摩挠楥楬杮愠摮椠瑮来慲整⁤汥捥牴湯捩搠楲敶⁲瑥⹣搠物捥汴⁹湯映污敳挠楥楬杮椠据畬楤杮挠湯敮瑣潩獮眠瑩⁨⸱‵煳洮剆倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲慣汢⁥湡⁤慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥‮ 䕓呃佉ⵎ㩁䌠噉䱉†佗䭒 䕓呃佉ⵎ䈠›⹐⹈⁅圠剏ᵋ匠䍅䥔乏‭㩃䔠䕌呃䥒䅃⁌圠剏ᭋ匠䍅䥔乏䐭›商乒呉剕⁅圠剏≋匠䍅䥔乏‭㩅䄠剉佃䑎呉佉䥎䝎†佗䭒 䕓呃佉ⵎ䘠›偅䉁⁘圠剏⩋匠䍅䥔乏‭㩇䌠呃ⱖ䰠乁☠唠卐䤠噎剅䕔⁒佗䭒2 䕓呃佉ⵎ䠠›䥆䕒䐠呅䍅䥔乏䄠䑎䄠䅌䵒匠卙䕔⁍圠剏牐癯摩湩Ⱨ映扡楲慣楴湯☠椠獮慴汬瑡潩景㘠浭琠楨正䠠杩⁨牐獥畳敲氠浡湩瑡⁥⠠偈⥌氠浡湩瑡獥漠⁦灡牰癯摥搠獥杩景䔠瑸牥慩戠慲摮搠捥牯瑡癩⁥硥整楲牯朠慲敤搠獥杩敮⁲慬業慮整瀠湡汥映牯映捡摡⁥汣摡楤杮挠湯楦浲湩⁧潴䔠牵灯慥瑓湡慤摲䔠⁎㌴‸慰瑲嘠ⱉ䘠物⁥敒慴摲湥⁴片摡⁥䈠⁓汃獡⁳⹉吠敨搠獥杩慰数⁲桳污敢猠浡⁥湯戠瑯⁨楳敤⹳吠敨猠楡⁤慭整楲污猠慨汬戠⁥楦數⁤湯䄠畬業楮浵猠扵瑳畲瑣牵⁥楷桴ㄠ〰㠯洲⁘㠳浭堠㈠浭愠畬業楮浵†敲瑣湡畧敬⁲敳瑣潩獮眠瑩⁨湡摯穩湩⁧景㈠洰捩潲獮漠⁦桴⁥慳敭戠獡⁥潣潬牵漠⁦桴瑡漠⁦桴⁥偈⁌慬業慮整‮桔獥⁥敳瑣潩獮猠慨汬戠⁥楦數⁤楷桴䠠瑯䐠灩䜠污慶楮敺⁤牢捡敫⁴景†〵浭堠㔠洰⁘洵⹭䐠汵⁹楦數⁤楷桴映獡湴牥⁳⠠䥈呌⽉䘠卉䡃剅 景†〱浭堠㠠洰湯洠楡敢浡愠摮ㄠ洰⁘㔷浭瀠湩映獡湴牥⁳湯䈠楲正眠污⹬吠敨猠慰楣杮猠慨汬渠瑯戠⁥潭敲琠慨⸱洵牴‮卓䈠汯獴漠⁦〱浭堠ㄠ㔲浭 〱浭堠㜠洵潴戠⁥獵摥‮汁捳敲獷琠敢漠⁦卓‮慇癬湡穩摥挠慯楴杮猠慨汬戠⁥〶洠捩潲獮‮桔⁥污浵湩畩敳瑣潩獮琠敢†敶瑲捩污祬映硩摥漠桴⁥慷汬愠⁴〶洰⽣⹣吠楨⁳慣捬汵瑡潩獩戠獡摥漠楷摮瀠敲獳牵⁥景ㄠ〸欠⁧瑭獲⹱⠮䤠⁦桴⁥楷摮瀠敲獳牵⁥獩洠牯⁥桴湥愠捣牯楤杮祬琠敨瘠牥楴慣灳捡湩⁧桳污敢爠摥捵摥⤮吠敨戠慯摲猠慨汬戠⁥楦數⁤楷桴挠汯畯敲⁤楲敶獴⠠䉍⥅漠⁦桴⁥慳敭挠汯畯⁲景琠慨⁴景琠敨氠浡湩瑡⁥瑡愠搠獩慴据⁥景㘠〰浭挠振‮湉挠獡⁥桴⁥楦楮桳摥䠠杩⁨牐獥畳敲䰠浡湩瑡⁥䠨䱐 椠⁳潭敲琠慨〲洰牦浯琠敨眠污桴湥猠灥牥瑡⁥⽍⁓瑳畲瑣牵⁥桳污敢瀠潲楶敤⁤潴猠獵慴湩琠敨搠慥⁤潬摡漠⁦桴⁥桷汯⁥瑳畲瑣牵⁥污潣灭敬整椠据畬楳敶漠⁦污慴數⁳湡⁤畤祴†獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤搠物捥楴湯漠⁦湥楧敮牥椠档牡敧牐癯摩湩⁧湡⁤楦楸杮ㄠ′浭琠楨正䠠⁄楆牢⁥散敭瑮戠慯摲漠⁦硥整湲污眠污汣摡楤杮氠杩瑨朠畡敧猠整汥映慲敭⁤慦慣敤猠牴捵畴敲㔠‱浭琠楨正眠楨档椠据畬敤䔠敶敲瑳䜠污慶畬敭眠污牦浡⁥祳瑳浥⠠婁ㄭ〵㌬〰䴠慰礠敩摬猠牴湥瑧⥨挠浯牰獩湩⁧ㄵ洠牴捡牰景汩ⱥ〠㔮洠桴捩Ⱬ栠癡湩⁧睴煥慵汦湡敧⁳景㌠′浭愠摮瘠牥楴慣瑳摵⁳景猠穩⁥ㄵ洠Ɑ⸰‵浭琠楨正‬慨楶杮漠敮映慬杮⁥景㌠‶浭愠摮愠潮桴牥映慬杮⁥景㌠‴浭愠摮琠潷攠畱污氠灩⹳吠敨映慲敭猠慨汬戠⁥楦數⁤潴戠楲正眠污楷桴䴠⁓潷歲眠敨敲爠煥極敲⹤䔠敶敲瑳ㄠ′浭琠楨正栠慥祶搠瑵⁹楦牢⁥散敭瑮戠慯摲挠湯楦浲湩⁧潴䤠䥓㐠㘸㨲〲〰‬祔数䄠挠瑡来牯⁹噉愠摮朠灡眠汩敢映汩敬⁤楷桴猠汩捩湯瀠牥慭敮瑮祬‮椠据畬楳敶漠⁦污慴數⁳湡⁤畤祴†獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤搠物捥楴湯漠⁦湥楧敮牥椠档牡敧䄮楆楮桳湩⁧慷汬⁳楷桴琠硥畴敲⁤硥整楲牯瀠楡瑮漠⁦敲畱物摥猠慨敤㨠ܠ㌱㐮⸵舱敎⁷潷歲⠠吠潷漠⁲潭敲挠獯⁴灡汰敩⁤⁀⸳㠲氠牴ㄯ‰煳癯牥愠摮椠据畬楤杮瀠楲業杭挠慯⁴景攠瑸牥潩⁲牰浩牥愠灰楬摥䀠㈠㈮‰杫 〱猠浱+䌀獯⁴景瀠湡汥猠穩⁥⸳‰⁸⸲㐴洠牴㴮⸷㈳猠浱䈀獡捩删瑡⁥景吠敨†慍整楲污&㜀〳ⴶ䄠畬業楮浵匠捥楴湯⁳㘱杫⁳剀⁳㤱ℰ㌷㤸‭湁摯穩湩⁧㘱欠⁧⁀獒‮㠳欯⩧㘲㤰ⴠ䴠⁓慇癬湡穩摥䈠慲正瑥㔠欠⁧⁀〱⼴杫8㈀ㄶ″‭卓䈠汯獴眠瑩⁨慷桳牥漠⁦楳敺⁳ㄠ′潮⁳剀⁳㜳支捡⡨偈⁌硅整湲污䌠慬獤⁀獒㔮㘹⸷⼵煳⁸⸷㈳ 匀扵琠瑯污䄀摤映牯眠獡慴敧䀠㔠ᬥ摁⁤潦⁲牔湡灳牯慴楴湯䀠㈠ḥ摁⁤潦⁲升⁔癏牥䌠♐敃獳䀠ㄠ┸刀瑡⁥潦⁲⸷㈳匠浱㴠 刀瑡⁥敐⁲煳7刀瑡⁥敐⁲煓景䠠䱐倠湡汥楬杮⠠慓⥹㴠删⹳㐸㌱〮‰ 煓⹭5Ȉ †††††††††††††††††⹎⹓㈭††††††#/) 䈀獡捩删瑡⁥獡瀠牥焠潵慴楴湯 匀祡瀠牥猠浱ɘ䈀牯湩Ⱨ瀠潲楶楤杮愠摮椠獮慴汬湩⁧潢敲⁤慣瑳椭⵮楳畴爠楥普牯散⁤散敭瑮挠湯牣瑥੥楰敬⁳景朠慲敤䴠㈭‵景猠数楣楦摥搠慩敭整⁲湡⁤敬杮桴戠汥睯琠敨瀠汩⁥慣⁰潴ਠ慣牲⁹⁡慳敦眠牯楫杮氠慯⁤潮⁴敬獳琠慨灳捥晩敩Ɽ攠捸畬楤杮琠敨挠獯⁴景猠整汥爠楥普牯散敭瑮戠瑵椠据畬楤杮琠敨挠獯⁴景戠牯湩Ⱨ楷桴戠湥潴楮整猠汯瑵潩湡⁤†琊浥潰慲祲挠獡湩⁧景愠灰潲牰慩整氠湥瑧⁨潦⁲敳瑴湩⁧畯⁴湡⁤敲潭慶景猠浡⁥愠摮琠敨氠湥瑧⁨景琠敨瀠汩⁥潴戠⁥浥敢摤摥椠桴⁥楰敬挠灡攠捴‮污潣灭敬整‬ਠ湩汣摵湩⁧敲潭慶景攠捸癡瑡摥攠牡桴眠瑩⁨污楬瑦⁳湡⁤敬摡⁳䰨湥瑧⁨景瀠汩⁥潦⁲慰浹湥⁴桳污敢洠慥畳敲⁤灵潴戠瑯潴景瀠汩⁥慣⥰خ〲㈮ㄮ㌀〰洠楤⁡楰敬ճ⸲⸸ㄱ
慅瑲睨牯湩攠捸癡瑡潩湩映畯摮瑡潩牴湥档獥漠⁲牤楡獮⠠潮⁴硥散摥湩⁧⸱洵椠楷瑤⁨牯〱猠浱漠汰湡 湩汣摵湩⁧牤獥楳杮漠⁦楳敤⁳湡⁤慲浭湩⁧景戠瑯潴獭‬楬瑦甠瑰⸱洵‬湩汣摵湩杧瑥楴杮漠瑵琠敨攠捸癡瑡摥猠楯湡⁤楤灳獯污漠⁦畳灲畬⁳硥慣慶整⁤潳汩愠⁳楤敲瑣摥‬楷桴湩愠氠慥⁤景㔠洰‮䄠汬欠湩獤漠⁦潳汩ࠀ楆汬湩⁧癡楡慬汢⁥硥慣慶整⁤慥瑲⁨攨捸畬楤杮爠捯⥫椠牴湥档獥‬汰湩桴‬楳敤⁳景映畯摮瑡潩獮攠捴‮湩氠祡牥⁳潮⁴硥散摥湩⁧〲浣椠敤瑰㩨挠湯潳楬慤楴杮攠捡⁨敤潰楳整⁤慬敹⁲祢爠浡業杮愠摮眠瑡牥湩Ⱨ氠慥⁤灵琠〵洠愠摮氠晩⁴灵潴ㄠ㔮洠㔮਀㘀ഀ縀畓灰祬湩⁧湡⁤楦汬湩⁧湩瀠楬瑮⁨楷桴氠捯污猠湡⁤湵敤⁲汦潯獲椠据畬楤杮‬慷整楲杮‬慲浭湩

consolidating and dressing complete.5.1.1ÿProviding and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level. 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregae 20 mm nominal size)5.33BTAdd or deduct for providing richer or leaner mixes respectevely at all floor levels.5.33B.48Providing M-15 grade R.C.C. instead of M-20 grade R.C.C.
Reinforced cement concrete work in wall (any thickness)including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts, etc. upto floor five level excluding the cost of centering,shuttering,finishing and reinforcement.5.2.1E1:1:2(1cement:1coarse sand:2 graded stone aggregate 20mm nominal size5.9.19Foundation,footing,Bases of column etc for mass concrete.5.9.61Columns,Pillars,Piers,Abutments,Posts and struts.¹Providing desination 100 A one brick flat soling joints filled with local sand including cost of watering texes, roualty all complete as per building specification and direction of E/l.20mm cement plaster of mix:13.13.41:6 (1 cement : 6 coarse sand) Waterproofing of Landscape Area on Podium using Polyurea WH 200, 120 GSM Geo Fabric membrane. The Mother concrete surface shall be cleaned thoroughly by removing the debris and mortar droppings, loose particles and any other foreign materials which may affect the adhesion, the further treatments with the mother surface. All surface cracks shall be filled with cement moratr 1:4 CM enriched with polymer modified compound (Nitobond SBR latex ) by cutting V grooves of 6mmX6mm and filling with the cement mortar. Coving at all the junctions shall be done for a size of 50mm X 50mm with polymer modified mortar prepared by mixing 50 kg cement + 150kg Sand + 4Litre of Nitobond SBR Latex + Water required for mortar consistency. After which Bore Packing shall be done To ensure better bond using Nitobond SBR Latex as bonding agent over pipe and Internal side of concrete followed by providing and applying high strength non shrink grout Conbextra GP2 for the gap around pipes for a thickness up to 50mm before treating the surface with Waterproofing layer. Construction Joint Treatment shall be done to Identify cracks, crevices and honeycomb areas on slab surface at floor slab, construction joints then chasing them open in the form of  V groove and fixing PVC nozzles of 18 mm dia. and Filling the  V  groove with Renderoc CS And grouting the same in cement slurry admixed with Cebex 100, expandable grout additive @ 225gms per bag of cement of 50 kg., to full saturation. After That Polyurea WH 200, shall be spray applied resulting in 100% solids, flexible, two-component, rapid curing hybrid Polyurea coating system providing high corrosion resistance, abrasion and waterproofing resistance at 1.5mm thickness applied over a priming coat of Nitoprime 31 at a coverage rate of 250ml/Sqm all complete.Membrane to be extended over the coving upto 300mm over the vertical wall & tucked in to a grove of 6mm X 6mm in Land scaping area above Parking basement floor . 120 GSM Geo fabric membrane shall be laid over Polyurea membrane as protection & de-bonding layer and finished with M20 grade screed concrete admixed with Complast WL at the dosage of 125 ml/ bag of cement to a minimum thickness of 50 mm as per site requirement to provide required slope all complete as per companys specification and direction of E/I. d æ
 % S Approved rate B.C.DM.RÆDismantling of Existing Heat resistant tiles and Reinstallation of the same after water proofing works including replacement of damaged tiles as per specification and direction of Engineer Incharge.rSupplying, fitting & fixing of following Furnitures including taxes and royality Make - Godrej/Durian/Usha Lexus TOTAL FOR FURNITURE WORKS =î
DETAILED ESTIMATE FOR THE PROPOSED RENOVATION AND UPGRADATION WORK OF BSFC OFFICE AT BSFC BUILDING, FRAZER ROAD, PATNA( 8TH FLOOR ). CRenovation for BSFC Office 8th floor at BSFC Building, Frazer Road. ARCHIPLUS"ESTIMATE SHEET (Measurement Sheet)L-210,DUMRAON PLACESl. No.No.
Lsqm.$Vitrified Tile flooring 800 x 800 mmToiletSkirtingCladding over columnsCeramic glazed tiles in wall./Gents Toilet long wall5 short wall1Toilet long wall/ W.C long wall%Rectified glazed Ceramic floor tiles.m. M.S Grill Synthetic enamel paint 2.4 timesWooden frames in chaukhatD3D4cum.Non Decorative flush door1 mm Lamination over doorsD1Lobby1Window WKPART-1 :Renovation for BSFC Office 8th floor at BSFC Building, Frazer Road.K Title: Renovation of 8th floor BSFC, Patna Sheet No. & & & Total Sheet #11A Wall Toilet-Ladies Toilet long wall1 P.H.C long wallGents & Ladies Toilet1BMeeting room floorskirting1Pantry long wallEighth floor hallLobby+stair+lift Granite works Lift wall Window sill WWindow sill W1,2 Levelling Edge moulding(Mineral Fibre False ceiling 600 x 600 mm Office 8-10System Aluminium Windows††††††††††††††††††††††††††圠ⰱല潒汬牥䈠楬摮ɳ㉄䘀物⁥慒整⁤瑓敥潤牯映慲敭ਮ⹍畂汩楤杮.㔀‰浭琠楨正朠慬敺⁤楦敲爠獥獩慴瑮搠潯⁲桳瑵整♲汇穡湩⁧湩映物⁥敲楳瑳湡⁴潤牯猠畨瑴牥 倀湡捩戠牡 䘀⁄ㄨ丠协〈潔杵敨敮⁤汇獡⁳湩倠牡楴楴湯 潄牯ੳ晏楦散ㄠ㐭ô匀灵汰楹杮映硩湩⁧湡⁤楦瑴湩⁧楨桧猠捥牵瑩⁹潣湲牥氠捯潦⁲慰捴⁨楦瑴湩⡧䉑䱐ㄭ洠歡⥥†牢獵敨⁤瑳敥楦楮桳洠摡⁥景朠慲敤⁤污浵湩畩污潬⁹慣瑳栠畯楳杮猠楬湡⁤潣灭捡⁴楳敺氠杩瑨椠敷杩瑨愠汬挠浯汰瑥⁥獡瀠牥猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅ᙉ†䄨灰潲敶⁤慒整䈠䌮䐮&䐀畯汢⁥歳湩氠浡湩瑡摥倠牡楴楴湯 潄牯ㅳ敍瑥湩⁧潲浯††††††††††††††潬杮眠污㉬敍瑥湩⁧潲浯††††††††††††††桳牯⁴慷汬/䄀瑮⁥潲浯††††††††††††††桳牯⁴慷汬8伀晦捩⁥ⴵ‷慨晬栠⹴††††††††††††††潬杮眠污㥬晏楦散㔠㜭栠污⁦瑨‮†††††††††††††猠潨瑲眠污㉬晏楦散ㄠ㐭†††††††††††††††氠湯⁧慷汬3伀晦捩⁥ⴱ‴†††††††††††††††桳牯⁴慷汬3伀晦捩⁥ⴸ〱†††††††††††††††氠湯⁧慷汬3伀晦捩⁥ⴸ〱†††††††††††††††桳牯⁴慷汬Ʊ倀潲楶楤杮愠摮映硩湩⁧景ㄠ〮浭氠浡湩瑡摥䜨敲湥慬⽭敃瑮牵⽹敍楲潮 慰敮汬湩⁧灵潴猠数楣楦摥栠楥桧⁴癯牥†㈱洠桴捩偗⁃潢牡⁤景䄠獬潴敮⼠䜠敲湥汰⽹䌠湥畴祲洠歡⁥楦瑴摥愠摮映硩摥漠敶⁲汁浵湩畩牦浡⁥景㈠‵⁸㔲浭瀠獯獴愠⁴〳挠散瑮敲⁳湡⁤㈠‵⁸㔲浭栠牯穩湯慴敭扭牥⁳瑡愠灰潲⁸〳挠散瑮牥⁳湩汣摵湩⁧潣瑳漠⁦湡档牯湩⁧桴⁥慰敮汬湩⁧潴眠污獬瀠潲数汲⁹椠据畬楤杮琠牥業整琠敲瑡敭瑮愠⁳数⁲牤睡湩⁧灳捥晩捩瑡潩湡⁤楤敲瑣潩景䔠䤯‮ 慌業慮整⁤慐湮汥楬杮5䴀䐮††††††††††††††††††††氠湯⁧慷汬5䴀䐮††††††††††††††††††††桳牯⁴慷汬 ㈀〮琠浩獥圀瑡牥牰潯楦杮椠潴汩瑥8吀楯敬⁴††††††††††††††††††††潬杮眠污㡬††∠††††††††††††††††††††桳牯⁴慷汬倀湡牴㡹慐瑮祲††††††††††††††††††††氠湯⁧慷汬圀瑡牥牰潯楦杮椠潲景爀潯ᅦ片摩䈠䔭䄠楸⁳ⴱش㈱㘮報ý倀潲楶楤杮愠摮映硩湩⁧桴牥慭湩畳慬楴湯眠瑩⁨敒楳潂摮摥爠捯潷汯挠湯潦浲湩⁧潴䤠㩓㠠㠱″慨楶杮搠湥楳祴㐠‸杫洯ⰳ㔠‰浭琠楨正‬牷灡数⁤湩㈠〰⁇楖杲湩倠汯瑹敨敮䈠条⁳汰捡摥漠敶⁲硥獩楴杮映污敳挠楥楬杮愠摮栠汥⁤湩瀠獯瑩潩祢挠楲獳挠潲獳湩⁧䥇眠物⁥瑥⹣匀䉕吭呏䱁䘠剏䌠噉䱉‫䡐⁅佗䭒ᴽ佔䅔⁌但⁒低⁎䍓䕈啄䕌䤠䕔卍ᨽ佔䅔⁌但⁒匠䡃䑅䱕⁅呉䵅㵓%䄀䑄䘠剏ㄠ┸䜠呓䤠偍䕌䕍呎䥁乏㔨㌮┶㴩吀呏䱁䘠剏䌠噉䱉‫䡐⁅佗䭒᤽潃瑳漠⁦楃楶‫䡐⁅潗歲ॳ删久噏呁佉⁎乁⁄偕則䑁呁佉⁎佗䭒传⁆卂䍆传䙆䍉⁅䄠⁔卂䍆䈠䥕䑌义ⱇ††††††††††††††††††††䘠䅒䕚⁒佒䑁‬䅐乔⡁㠠䡔䘠佌剏⤠‮††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††敇敮慲扁瑳慲瑣漠⁦潃瑳††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††⤠䅐呒‭′›佃华剔䍕䥔乏传⁆佂乕䅄奒圠䱁⹌ᤠ慅瑲⁨潷歲椠硥慣慶楴湯ܮ㍆䜠瑡ᙥ慅瑲⁨潷歲椠楦汬湩⹧#匀湡⁤楦汬湩⁧湵敤⁲潦湵慤楴湯戠獡⹥ 倀䌮䌮戠獡⹥ሠ⹒⹃⁃潦湵慤楴湯⸠$匀湡⁤楆汬湩⁧湩瀠楬瑮⁨…潦湵慤楴湯ሮ湵敤⁲汰湩桴戠慥$㄀〰䄭戠楲正眠牯湩猠灵牥猠牴捵畴敲മ潂湵慤祲眠污ᑬ⹐⹃⁃湩映畯摮瑡潩⹮刀䌮䌮椠潦湵慤楴湯ီ⹒⹃⁃潃畬湭䌠⸲刀䌮䌮䌠汯浵ㅃᬮ⹒⹃⁃慢摮愠⁴汰湩桴氠癥汥മ汐湩桴戠慥ဠ⹒⹃⁃扡癯⁥⹇⹌刀䌮䌮戠湡⁤瑡氠湩整敬敶⹬䌀湥整楲杮☠猠畨瑴牥湩⁧潷歲 䤀潆湵慤楴湯 倀楬瑮⁨敢浡 䰀湩整慢摮挀汯浵౮敂潬⁷汰湩桴 䄀潢敶瀠楬瑮᭨洸楄⁡敒湩潦捲浥湥⁴㈨┰℩⹒⹃⁃湩映畯摮瑡潩…汐湩桴戠慥ͭ⹋ᥧ⹒⹃⁃湩猠灵牥猠牴捵畴敲ᰮ〱浭䐠慩删楥普牯散敭瑮⠠〶⤥㄀洲楄⁡敒湩潦捲浥湥⁴㈨┰ 瑓敥片汩污湯⁧潢湵慤祲眠污⹬ 匀整汥朠瑡፥牂捩汦瑡猠汯楬杮ᜮ祓瑮敨楴⁣湥浡汥瀠楡瑮ᘠ敔瑸牵⁥硅整楲牯瀠楡瑮 ㌀〰洠楐敬ɳㅐ
洀吀敩戠慥ቭ楌瑮敬戠湡⁤‱楳敤䰀湩汴⁥慢摮㌠猠摩ཥ楐敬映畯摮瑡潩፮潂湵慤祲眠污牦湯๴湅整慲据⁥慧整㈀‰浭琠楨正挠浥湥⁴汰獡整楲杮മ䘠潲瑮圠污⹬ठ⸲′楴敭ታ桗瑩⁥散敭瑮瀠瑵祴 䴀敥楴杮删潯푭ࠄ畓灰祬湩⁧楦瑴湩⁧…楆楸杮漠⁦敍瑥湩⁧慔汢⁥潍敤坄⽓〶〰䌯䙎ⴠ吠扡敬匠穩⁥〶〰ㅸ〵砰㔷洰⹭䴠敥楴杮吠扡敬ⴠ吠扡敬匠穩⁥㨠㘠〰䰰砠ㄠ〵地砠㜠〵瑈‮㔲浭琠歨‮牐汥浡倠牡楴汣⁥潢牡⁤慴汢瑥灯眠瑩⁨噐⁃摥敧戠湡楤杮‮牐癯獩潩景〠‱潎‮景㘠䴠摯汵⁥汆灩潴⁰潃敶⁲眨瑩潨瑵猠楷捴⁨湡⁤潳正瑥 潦⁲楷敲洠湡条浥湥⹴倠敨潮潢摮甠楳杮椠牐ⵥ慌業慮整⁤慐瑲捩敬䈠慯摲☠䔠杤⁥慢摮琠楨正敮獳眠汩敢猠慴瑲映潲洲潦⁲潔⁰…洱潦⁲敲瑳瀠牡獴‮畏⁲䱐䉐挠牥楴楦摥映潲卉⁉牧摡⁥…敔浲瑩ⱥ䈠牯牥☠䘠湵畧⁳敲楳瑳湡散氠浡湩瑡摥漠瑵楳敤椠敳敬瑣摥挠汯牯☠椠獮摩⁥丨湯嘠獩扩敬倠牡⥴眠汩敢戠污湡楣杮眠楨整‮〱┰䔠牵灯慥敤楳湧☠琠硥畴敲☠ㄠ〰‥牐摯捵⁴潃獮獩整据ⱹ映摡⁥敲楳瑳湡散氠浡湩瑡潩敢瑳䤠瑮牥慮楴湯污吠捥湨汯杯⹹吠敨䴠瑡牥慩獬伯杲湡穩瑡潩桳污敢挠牥楴楦摥†卉ⵏ〹㄰‬卉ⵏ㐱〰ⰱ䤠体㔭〰㄰‬卉ⵏ㔴〰ⰱ愠汬䤠体䌠牥楴楦慣整⁳桳畯摬戠⁥獉畳摥映潲䅎䍂⁂捁散敬慲整⁤杁湥祣‬䥂䵆⁁䕌䕖⁌ⰱ䈠䙉䅍䴠浥敢獲楨⁰湡⁤䥂䵆⁁潃灭楬湡⁴牰摯捵⁴慢敳Ⱐ䤠摮慩敄楳湧䴠牡散瑲晩敩Ɽ吠慲敤䴠牡敃瑲晩敩Ɽ䜠䕒久䜠䅕䑒戠⁹䱕䜬䕒久倠佒‬䕓䅆‬‬䥁呏ⱁ䘠䍓猠潨汵⁤敢䤠獳敵⁤牦浯匠千䜠潬慢敓癲捩獥唠䅓Ⱐ倠䙅ⱃ䜠䥒䅈☠䤠䉇⹃湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ ? ٽЈ匀灵汰楹杮‬楦瑴湩⁧…楦楸杮漠⁦楈桧䈠捡桃楡⁲潍敤䱅久剔⽁䉈ⴠ䤠求捡潃潬牵匠穩⁥ⴺ⠠⥗㔶䴰⁘䐨㘩〵浍堠⠠⥈㈱〶浍匮慥楴杮䠠楥桧⁴㌵䴰⹭䴠獡整晲汵祬吠楡潬敲⁤湉䈠瑵整祲匭景⁴敌瑡敨敲瑴⁥潔䄠捣湥畴瑡⁥瑉⁳畃癲獥‬桔⁥桃楡⁲潃汬捥楴湯䘠慥畴敲⁳敒楦敮⁤楓桬畯瑥整⁳桔瑡䄠摤䌠浯潦瑲吠潍敤湲圠牯獫慰散⹳䘠慥畴楲杮㌠⁄牁牭獥獴吠楡潬敲⁤潔夠畯⁲潃晭牯ⱴ䤠⁴敌獴夠畯䴠瑡档夠畯⁲敄歳䠠楥桧⹴䄠晦硩摥圠瑩⁨牐浥畩慃瑳牥⁳潆⁲汆極⁤潍敶敭瑮䄠牣獯⁳湁⁹畓晲捡ⱥ吠楨⁳楈桧䈭捡畍瑬晩湵瑣潩慮桃楡⁲䈠敲瑡慨汢⁥敌瑡敨敲瑴⁥灕潨獬整祲䘠敥獬匠景⁴湁⁤敋灥⁳潙⁵潃汯牥䘠牯䰠湯敧⹲䄠橤獵慴汢⁥䐳䄠浲敲瑳⁳敌⁴潙⁵慍捴⁨潙牵䐠獥效杩瑨‮摁番瑳扡敬䠠慥牤獥⁴湅扡敬吠摁灡⁴潙牵匠慥楴杮倠獯畴敲䈠獡摥传桔⁥慔歳‮敇敮潲獵祬倠摡敤⁤敓瑡䄠摮䠠杩⁨慂正敲瑳传晦牥⁳潃晭牯慴汢⁥敓瑡湩⁧硅数楲湥散‮慐摤摥䄠浲敲瑳⁳畆瑲敨⁲汅癥瑡獥䌠浯潦瑲‮湐略慭楴⁣效杩瑨䄠橤獵浴湥⁴敌獴夠畯䴠瑡档吠敨䐠獥效杩瑨‮楔瑬吠湥楳湯䌠湯牴汯䰠瑥⁳潙⁵湉牣慥敳传⁲敄牣慥敳吠敨删獥獩慴据⁥桗汩⁥潙⁵敒汣湩⹥匠湹档潲楮敳⁤敍档湡獩楗桴㐠删捥楬楮杮倠獯瑩潩晏敦獲倠牥潳慮楬敳⁤潃晭牯⹴ㄠ㘳䬠⁧潌摡䈭慥楲杮䌠灡捡瑩⁹湅畳敲⁳瑓扡汩瑩⁹湁⁤敓畣楲祴䘠牯吠敨唠敳⹲倠敲業浵丠汹湯䈠獡⁥湅畳敲⁳潌杮癥瑩⹹䠠杩⵨畑污瑩⁹慃瑳牯⁳湅畳敲匠潭瑯⁨潎獩ⵥ牆敥䴠癯浥湥⹴吠敨匠汥敬⁲ 潃灭湡⁹桓畯摬䈠⁥慎换⁢敃瑲晩敩⁤獉ⵯ〹㄰㈺㄰ⰵ䤠潳ㄭ〴㄰㈺㄰ⰵ传獨獡ㄭ〸㄰㈺〰ⰷ䤠潳㐭〵㄰㈺㄰ⰸ䤠潳㔭〰㄰㈺㄰‸湁⁤獉ⵯ㌱㠴⸵传桴牥䌠牥楴楦慣楴湯⁳汕䜭敲湥畧牡⁤潇摬⠠楗桴䴠牯⁥桔湡ㄠ〰倠潲畤瑣⁳灁牰癯摥䤠据畬楤杮匠牵慦散䴠瑡牥慩⥬‬片桩⁡ⵖ〲㤱Ⱜ䜠敲湥牰Ɐ䤠摮慩敄楳湧䴠牡Ⱬ䘠捳‬敐捦⸮湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ . / A ͅȈ匀灵汰楹杮映瑩楴杮☠䘠硩湩⁧景䴠摥畩慂正䌠慨物䴠摯汥䄠䥒呓⽏䉍ⴠ䌠慨物匠穩⁥⠠⥗㘶洰⁘䐨㘩〹浭堠⠠⥈ㄱ〳浭‮慍整楲污☠匠扵祴数䘠扡楲⁣‭敍桳‮畆据楴湯䄠橤獵慴汢⁥界扭牡匠灵潰瑲‬敒潶癬湩Ⱨ䄠橤獵慴汢⁥牁牭獥ⱴ倠敮浵瑡捩䠠楥桧⁴楌瑦‮敍档湡獩敓晬圠楥桧⁴畍瑬汩捯楫杮䴠捥慨楮浳‮灕潨獬整祲䴠瑡牥慩慆牢捩‬慆牢捩ⴠ䴠獥⹨匠慥⁴慍整楲污䘠扡楲⹣䘠湩獩⁨慍瑴⹥䌠汯畯⁲…潃潬牵䘠浡汩⁹片祥ⴠ䰠杩瑨‮桔⁥敓汬牥⼠䌠浯慰祮匠潨汵⁤敂丠扡扣䌠牥楴楦摥䤠潳㤭〰㨱〲㔱‬獉ⵯ㐱〰㨱〲㔱‬桏慳⵳㠱〰㨱〲㜰‬獉ⵯ㔴〰㨱〲㠱‬獉ⵯ〵〰㨱〲㠱䄠摮䤠潳ㄭ㐳㔸‮瑏敨⁲敃瑲晩捩瑡潩獮唠⵬片敥杮慵摲䜠汯⁤在瑩⁨潍敲吠慨〱‰牐摯捵獴䄠灰潲敶⁤湉汣摵湩⁧畓晲捡⁥慍整楲污Ⱙ䜠楲慨嘠㈭㄰ⰹ‬片敥灮潲‬湉楤湡䐠獥杩慍歲‬獆Ᵽ倠晥⹣湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ ? 䴀䐮䌠慨扭牥‬湁整愠摮倠䄮删潯፭潆⁲景楦散〠‱潴ㄠᴰ潆⁲潃灭捡潴⁲湡⁤敒潣摲爠潯㭭楓杮敬䘠捡摥䴠扯汩ⵥㄠ〸洰⁗⁸㈴洵⁸ㄲ〰浭䠨⥴‭㄰丠獯㤮楓杮敬䘠捡摥䘠硩ⴠ㠱〰浭圠砠㐠㔲浭砠㈠〱洰⡭瑈⴩〠‶潎⹳錠ࠇ畓灰祬湩⁧楦瑴湩⁧…楆楸杮漠⁦传晦捩⁥慔汢⁥潍敤䩍⽆ㄶ〱⼱⁁楷桴猠摩⁥湵瑩删瑥牵⵮吠扡敬匠穩⁥䰨㈭〸砰ⵄ〱㔲䡸㜭〷洩…楓敤删湵敮⁲楓敺⠠ⵌㄱ〰䑸㔭〰䡸㜭〷洩⹭吠扡敬眠瑩⁨湩整捲慨杮扡敬猠摩⁥湵瑩爠瑥牵f ize 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. + ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. G ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. F áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. 3 4 F ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. E Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. $ % A Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. ? Supplying fitting & Fixing of Table with side unit return Model DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be sta

from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. I Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A - Chair Size (W)590mmX (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat.This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA,FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. B JSupplying fitting & Fixing of High Back Chair with revolving Model RICH/ 37815/HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. - . Q ßSupplying fitting & Fixing of Office Table with Side Unit Model DWS/34756 - Table Size-(L)2000mm X (D)1800mm X (H)755mm No Of Drawers3 No Of Shelves 5 Add Ons Interchangeable Side Runner Finish Matte Size Large Style Contemporary-is a suave . Table top thk 40mm Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. J Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A- Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. + , A NSupplying fitting & Fixing of High Back Chair with revolving Model RICH / 37815 / HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. = > C D U Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. 1 2 ; xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. , - A Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. ( 2Double Faced Mobile- 1800mm W x 850mm x 2100mm HtjCompactor Optimizer of 2080mm overall height as per detail given below. Technical Specification *Verticals: - In 0.8 mm Thickness CRCA sheet & shall be in 8-fold Box Type design in full panel form.* Shelves: - In 0.8mm Thickness in 10 fold design to take a load of 60 kgs UDL.*Center Partition : In 0.8 mm Thickness, shall be in full sheet in 2 parts & each shall have 2 nos. ribs for strength & rigidity, this shall be used as center partition for DFM.*The Backs of the Single Fixed unit shall be closed by Box Type Covers.*Base Frame: - Shall be fabricated from formed channels of size 40 x 100 x 3mm thick made from HR steel & internal supports in 2mm HR. Base Frame will be made out of ISMC 75x40 for 2700mm long unit. base wheels fabricated from solid steel round with groove for self alignment to prevent derailment of the unit.Vertical Panel: Vertical Panel of size 450x2025 made of 1 mm CRC Sheet.Storage Level: Our unique 8 bend Shelves are made out of 1mm CRC Sheet for bearing maximum load.Clips: Boltless Electroplated Clips are used for resting of storage panels for easy fixing & easy adjustment of loading level.Central Lock: This single central lock is provided to lock the whole unit into single one.compartment to save you from searching numerous keys.Center Partition: These are made out of 0.8mm CRC Sheet to give maximum stability & strength to the whole unit.  ƒCUBICAL WORKSTATION (1500+1500X600X1200)- WORKSTATION Size (1500+1500X600X1200) ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop.· Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side. ·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray . .Metal CPU Trolley. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.  ÝSupplying fitting & Fixing of 2 Door Storage Cabinet Model PJ014739-Material Prelaminated particle board Colour-as per direcion E/I. Dimension (W)900mm X (D)400mm X (H)1200mm.Finish Matte.Size Standard. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C °Supplying fitting & Fixing of Medium Back Chair Model MMPL/70008/MB- Chair Size (W)580mm X (D)670mm X (H)1110mm. Its Classic All-Black Look With Soft Black Fabric Upholstery Makes It An Irresistible Chair. The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C #Add for IDA Handling Charges @ 7 % 5.22.7C1
Thermo-Mechanically Treated barsTMTC-500-12mm dia(3 sidesT(Rupees Four Crores Ninety Two Lacs & Ninety Six Thousand & Two Hundred Fourty Only) Rs. 46071247.00ø
B.O.Q FOR THE PROPOSED RENOVATION AND UPGRADATION WORK OF BSFC OFFICE AT BSFC BUILDING, FRAZER ROAD, PATNA( 8TH FLOOR ). #Make- As per BCD approved make List
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G.I. box etc. as required.1.7.12"4x10 sq.mm + 1x6 sq. mm earth wirešSupplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ reeessed PVC conduit as required.1.15.22 X 1.5 sq. mm2.4.1100 A, 30 KA, FPMCCB2.4.963/100 A, 16 KA, TPMCCBISupply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.)40 A to 63 A, TP&N2.12.840 A to 63 A, SPNFProviding and fixing copper tape 20 mm X 3 mm thick (Bus Bar in Panel)2.33.22.33.1"6 way, Double door, l/C 160A, MCCB"4 way, Double door, l/C 160A, MCCB5.7.312 wattG
Supply and fixing surface recess/ surface mounted following types LED down lighter with minimum efficacy 100 lm/w in pressure die cast aluminium housing and integrated electronic driver etc. directly on ceiling including connection with 1.5 sqmm FR PVC insulated copper conductor cable and earthing the body etc. as required ‰
Supplying and fixing recess / surface mounted 36 watt LED flat panel 2 x 2 ft with minimum efficacy 100 lm/w which provides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc. directly on false ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.  9 / 10 watt LED Lamp 20 watt LED LampLaying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.7.4.2¼Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.150 mm sweep (1300/1400 RPM)8.18.18.18.2200 mm sweep (1300/1400 RPM)7.7.11600 A200 A,
Supplying and fixing 4' x 20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc. direcctly on wall/ceilling including connection with 1.5 sq. mm. FRLS PVC insulated copper conductor etc. as required. (For non-residential building)ËProviding and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.l. tube, having single prong at top, with 85 mm dia 6 mm thick G.l' base plate including holes etc. complete as required.‘Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) DSR 25 11.13½ X 95 sq. mm (45mm)11.1.24ÇSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.95 sq. mm, 3.5 coreþS/F 'C' series, MCB: Supplying and fixing following rating, 240/415 volts, 'C' curve, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.‰
Supplying and fixing , following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder ainted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBS) BCD A.R 1016 HP BCD A.R 12
VRF/VRV indoor AC unit (ceiling mounted 4 way):- Supply installation testing and commissioning of 4 way round flow ceiling suspended/mounted cassette type unit comprising of copper evaporator, electronic expansion valve, blower, motor, filter pad, auto air swing louvers, temperature &on/off display with inbuilt drain pump & decorative panels including internal wiring, controls. Dimension in terms of length & width should not be more than 950mmX950mm with wireless remote controller. (Single phase/three phase)4.50 TR BCD A.R 11®
VRF/VRV indoor AC unit (wall mounted):- Supply installation testing and commissioning of wall mounted indoor split unit comprising of copper evaporator, electronic expansion valve, blower, motor, filter pad, auto air swing louvers, and temperature & on/off display with provision of discharge angle setting by wireless remote controller including internal wiring, controls complete as per specification. (Single phase/three phase)1.05 tr
`1.33 TR1.65 TR1.05 TR0.83 TR11.1.223½ X 50 sq. mm (35mm)50 sq. mm, 3.5 core7.7.9 BCD A.R 9Ô
Copper piping: - Supply, installation, testing and commissioning of interconnecting copper refrigerant pipe work (19mm/13mm thick) duly insulated with elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. And exposed piping should be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as per specification Q31.8 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q28.6 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)O25 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q22.2 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q19.1 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q15.9 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q12.7 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)P9.7 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)P6.4 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q34.9 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)O38 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)mtr BCD A.R 16“Y joints:- Supply, installation, testing & commissioning of ref nut/Y-joints brass for indoor and outdoor units of suitable size as per requirement¿Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification . BCD A.R 732 mmDSR EnM 25 4.14.1.44.1.2-450 mm width X 50 mm depth X 2.0 mm thickness4.1.6dProviding and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required.Z
Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.MP SOR 2024 43.143.1.3 + GST @ 18%ªEPABX system consists of 64 nos. extensions (4 digital 60 analog) , 16 nos of junction & upto 128 nos. of expandable eport, with one operating console, 3 Amp max. current43.3.5 + GST @ 18%’Supplying, fixing essential additional accessories to EPABX system of approved make with all necessary material as required as per specifications.MP SOR 2024 43.343.3.10 + GST @ 18%W
Supply, installation, testing and commissioning of EPABX system consist, no. of extension, no of junction, no. of expandable eport, operating console, current on max. load with ISDN compatible of approved make and labor as required as per specifications. (Make- Matrix. Alcatel, Syntel, Honeywell or approved equivalent as per approval of EIC)¥EPABX system digital phone with 2 line display (32 characters) with 8 programmable keys. (Make- Matrix, Alcatel, Beetel or approved equivlent as per approval of EIC)e4 push button CLI phone. (Make- Matrix, Alcatel, Beetel or approved equivlent as per approval of EIC)5
Supply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizesMP SOR 2024 38.310 Pair38.3.1 + GST @ 18%MP SOR 2024 38.4ƒSupply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below :-38.4.1 + GST @ 18%38.4.4 + GST @ 18%50 Pair62 MP IP IR eyeball camera with H.264 video compressionMP SOR 2024 54.1Supply, Installation testing and commissioning of the IP dome camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR). UL listed54.1.1 + GST @ 18%52 MP IP IR bullet camera with H.264 Video compressionMP SOR 2024 54.254.2.1 + GST @ 18%xSupply, Installation testing and commissioning of the IP bullet camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR) Hard diskMP SOR 2024 54.30#Providing &fixing of 2 TB hard disk54.30.1 + GST @ 18%ŠSupply, installation testing and commissioning of wall mounting rack, for computer switches/Patch Panel etc complete as mentioned below :-MP SOR 2024 38.1738.17.2 + GST @ 18%¤9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement1.58.11 run of cableMP SOR 2024 57.257.2.4 + GST @ 18%
55 öSupply, installation testing and commissioning of High-Speed HDMI corrosion-resistant connector & braided cable, Supports Ethernet, 3D, 4K video, computers and other HDMI-enabled devices Black as required to complete the job as mentioned below :-MP SOR 2024 38.145 Metre, HDMI cord38.14.3 + GST @ 18%38.14.5 + GST @ 18%20 Metre, HDMI cord LAN Network38.17.4 + GST @ 18%MP SOR 2024 38.20ê
24-Port Gigabit Unmanaged Desktop Switch. Full wire-speed data transmission. Energy-efficient design. 1000Base-T Interface : 24. Auto MDI/MDIX .Switching Capacity : 48 Gbps. Operation Temperature 0 ~ 40 °C. Power Input ACÿ100 ~ 240 V.38.20.4 + GST @ 18%38.20.3 + GST @ 18%MP SOR 2024 38.15 + GST @ 18%MP SOR 2024 38.9<RJ - 45 computer socket cat 6 with shutter modular (1Module)38.9.1 + GST @ 18%MP SOR 2024 38.13!CAT 6 RJ45 patch cord UTP 1 metre38.13.1 + GST @ 18%38.13.3 + GST @ 18%!CAT 6 RJ45 patch cord UTP 3 metreMP SOR 2024 47.2—
Supply, installation, testing and commissioning of UPS with isolation transformer & battery for backup, having three phase input with ground (R-Y-B-N-G), Voltage range 190v AC-478v AC (based on load %), line low transformer (0-50% :190v/51-100% : 305v ± 3% VAC), line low comeback +25 - 35 VAC ( ± 3%), line high transfer 478 VAC (± 3%), line high comeback 461 VAC (± 3%), frequency rang 46 - 54 Hz, power factor 0.99, Total harmonic dist 10 Each 85.2

18.49 tion (current)-THDi (<5% with full load, having output

最攀 ㈀㈀ 嘀䄀䌀⼀㈀㌀ 嘀䄀䌀⼀㈀㐀 嘀䄀䌀Ⰰ 瘀漀氀琀愀最攀 爀攀最甀氀愀琀椀漀渀 넀 ㄀─Ⰰ 昀爀攀焀甀攀渀挀礀 㔀 䠀稀 넀 ⸀㄀ 䠀稀Ⰰ 匀礀渀挀栀爀漀渀椀稀愀琀椀漀渀 爀愀渀最攀 㐀㘀 ⴀ㔀㐀 䠀稀Ⰰ 瘀漀氀琀愀最 alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi 10 Each 434.2

18.51 tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.JSupplying fitting & Fixing of High Back Chair with revolving Model RICH/ 37815/HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A - Chair Size (W)590mmX (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat.This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA,FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return Model DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ƒCUBICAL WORKSTATION (1500+1500X600X1200)- WORKSTATION Size (1500+1500X600X1200) ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop.· Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side. ·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray . .Metal CPU Trolley. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.°Supplying fitting & Fixing of Medium Back Chair Model MMPL/70008/MB- Chair Size (W)580mm X (D)670mm X (H)1110mm. Its Classic All-Black Look With Soft Black Fabric Upholstery Makes It An Irresistible Chair. The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ÝSupplying fitting & Fixing of 2 Door Storage Cabinet Model PJ014739-Material Prelaminated particle board Colour-as per direcion E/I. Dimension (W)900mm X (D)400mm X (H)1200mm.Finish Matte.Size Standard. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.jCompactor Optimizer of 2080mm overall height as per detail given below. Technical Specification *Verticals: - In 0.8 mm Thickness CRCA sheet & shall be in 8-fold Box Type design in full panel form.* Shelves: - In 0.8mm Thickness in 10 fold design to take a load of 60 kgs UDL.*Center Partition : In 0.8 mm Thickness, shall be in full sheet in 2 parts & each shall have 2 nos. ribs for strength & rigidity, this shall be used as center partition for DFM.*The Backs of the Single Fixed unit shall be closed by Box Type Covers.*Base Frame: - Shall be fabricated from formed channels of size 40 x 100 x 3mm thick made from HR steel & internal supports in 2mm HR. Base Frame will be made out of ISMC 75x40 for 2700mm long unit. base wheels fabricated from solid steel round with groove for self alignment to prevent derailment of the unit.Vertical Panel: Vertical Panel of size 450x2025 made of 1 mm CRC Sheet.Storage Level: Ou

⁥畯⁴景ㄠ浭䌠䍒匠敨瑥映牯戠慥楲杮洠硡浩浵氠慯⹤汃灩㩳䈠汯汴獥⁳汅捥牴灯慬整⁤汃灩⁳牡⁥獵摥映牯爠獥楴杮漠⁦瑳牯条⁥慰敮獬映牯攠獡⁹楦楸杮☠攠獡⁹摡番瑳敭瑮漠⁦潬摡湩⁧敬敶⹬敃瑮慲潌正›桔獩猠湩汧⁥散瑮慲潬正椠⁳牰癯摩摥琠潬正琠敨眠潨敬甠楮⁴湩潴猠湩汧⁥湯⹥潣灭牡浴湥⁴潴猠癡⁥潹⁵牦浯猠慥捲楨杮渠浵牥畯⁳敫獹䌮湥整⁲慐瑲瑩潩㩮吠敨敳愠敲洠摡⁥畯⁴景〠㠮浭䌠䍒匠敨瑥琠楧敶洠硡浩浵猠慴楢楬祴☠猠牴湥瑧⁨潴琠敨眠潨敬甠楮⹴†☠
牐癯摩湩⁧湡⁤汰捡湩⁧湩瀠潲数⁲潰楳楴湯挠湯牴汯敬⁤数捲汯瑡湩⁧䌨⥐䠠獯⁥卉⁉慭歲摥⠠卉㠺㈴⤳㘠″浭搠慩砠ㄠ‵潬杮挠浯汰瑥⁥楷桴椠獮慴瑮湡潥獵琠灹⁥瑳楡汮獥⁳瑳敥㌶洠楤ⱡ䤠䥓洠牡敫⁤慭敬☠映浥污⁥潣灵楬杮⁳䤨㩓〹⤳戠畯摮愠摮爠癩瑥摥琠潨敳瀠灩⁥楷桴挠灯数⁲楲敶獴愠摮ㄠ㔮洠潣灰牥眠物⹥ǔ倀潲楶楤杮愠摮映硩湩⁧敷瑡敨⁲牰潯⁦潨敳挠扡湩瑥⁳潦⁲慹摲栠摹慲瑮映扡楲慣整⁤牦浯ㄠ‶⁧卍猠敨瑥眠瑩⁨畦汬朠慬獳搠潯⁲湡⁤潬正湩⁧牡慲杮浥湥ⱴ猠極慴汢⁥潴愠捣浯潭慤整漠敮栠摹慲瑮瘠污敶‬‴潮⹳㔱潬杮栠獯ⱥ㈠丠牢湡档瀠灩⁥湡⁤湯⁥楦敲慭❮⁳硡⹥吠敨挠扡湩瑥猠慨汬戠⁥慰湩整⁤楷桴漠敮挠慯⁴景瀠楲敭⁲湡⁤楦楮桳摥猠潴敶攠慮敭汬摥∠楆敲删摥Ⱒ∠楆敲䠠獯≥眠楲瑴湥漠牦湯⁴湩汣摵湩⁧畳瑩扡祬洠畯瑮摥漠⁡慲獩摥洠獡湯祲瀠慬晴牯獡爠煥極敲⹤⠠灁牰硯〠㜮洵砠〠㘮⁸⸰㔲⥭✮
畓灰祬‬湩瑳污慬楴湯‬整瑳湩⁧…潣浭獩楳湯湩⁧景朠湵洠瑥污㈠眠祡䘠物⁥牢杩摡⁥畳瑣潩潨敳挠畯汰湩⁧䐨慲⵷畯⁴潃湮捥楴湯 楷桴渠瑵映牯映浥污⁥潣灵楬杮愠⁳数⁲卉㤺㈰ㄭ㜹‴潣灭敬整眠瑩⁨㔱‰浭搠慩‮䥇猠捵楴湯瀠灩⁥湡⁤㔱‰浭搠慩‮‱潎‮䥃映潯⁴慶癬⁥汦湡敧⁤琨敢挠湯敮瑣摥琠瑳瑡捩眠瑡牥琠湡⥫砮
牐癯摩湩⁧湡⁤楦楸杮䴠⁓慣楢敮⁴琨湥汣獯⁥扡癯⁥牄睡漭瑵䘯物⁥牢杩摡⁥湩敬⁴潣湮捥楴湯⥳†慦牢捩瑡摥映潲㘱⁧桳敥⁴楷桴映汵牦湯⁴汧獡⁳潤牯愠摮氠捯楫杮愠牲湡敧敭瑮搠汵⁹慰湩整⁤楷桴漠敮挠慯⁴景瀠楲敭⁲湡⁤睴牯洠牯⁥潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤慭敫愠摮猠慨敤愠摮猠極慴汢⁹潭湵整⁤湯愠爠楡敳⁤慭潳牮⁹汰瑡潦浲愠⁳敲畱物摥⠠灁牰硯〮㜮‵⁸⸰‶⁸⸰㔴洠⸩LJ匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮☠挠浯業獳潩楮杮†景洠汩⁤瑳敥汢捡楰数⠠卉ㄺ㌲⼹卉㌺㤸⤵栠慥祶挠慬獳椠据畬楤杮挠瑵楴杮‬捳敲楷杮‬敷摬湩⁧瑥⹣挠浯汰瑥⁥楷桴映瑩楴杮瘠穩‮整獥攠扬睯‬敢摮ⱳ映慬杮獥‬敲畤散獲攠捴‮湩汣摵湩⁧牰癯摩湩⁧湡楴挭牯潲楳敶琠敲瑡敭瑮⠠潣瑡湩⁧湡⁤牷灡楰杮 楷桴㐠洠桴捩慴数愠摮栠汯摩祡琠獥⁴档捥獡瀠牥䤠㩓〱㈲‱潣灭敬整愠⁳敲畱物摥‮潎整㨠倠灩獥甠瑰湡⁤〵洠楤⁡桳污敢琠牨慥敤⁤潪湩獴‬扡癯⁥〵浭猠慨汬戠⁥敷摬摥樠楯瑮⹳®Ȉ倀潲楶楤杮愠摮映硩湩⁧牰獥畳敲朠畡敧⁳楷桴椠潳慬楴湯挠捯獫愠摮挠牨浯⁥汰瑡摥挠灯数⁲楰数⁳獡栠摹慲瑮猠慴楴湯琠敲摡瀠敲獳牵⁥牦浯〠㈭‵杫振㉭挠浯汰瑥⁥湡⁤景搠慩楤⁡㔱‰浭谮㼀贀܀글ࠀ牐癯摩湩⁧湡⁤楦楸杮瀠敲獳牵⁥慧杵獥眠瑩⁨獩汯瑡潩潣正⁳湡⁤档潲敭瀠慬整⁤潣灰牥瀠灩獥愠⁳票牤湡⁴瑳瑡潩潴爠慥⁤牰獥畳敲映潲ⴰ〲欠⽧浣′潣灭敬整愠摮漠⁦楤污搠慩ㄠ〵洠⹭Œ?/ 䌠剁䥒䝁⁅䙏䴠呁剅䅉⁌䥗䡔䰠䅏䥄䝎☠唠䱎䅏䥄䝎%䌀慯獲⁥慳摮⠠㠵欠敬摡映潲潫汩慷⥲䰀捯污匠湡⁤䰨慥⁤䬱㈫⹐☩瑓湯⁥桃灩⁳䰨慥⁤祢删楡牦浯䴠湡異⥲$刀慥⁤牂捩獫ㄠ〰⁁䰨捯污䰠慥⁤䬱㜫⥐†佔䅔⁌但⁒䥃䥖⁌佗䭒†䕓呃佉ⵎ䄠吀呏䱁䘠剏倠䕈圠剏⁋匠䍅䥔乏䈭)吀呏䱁䘠剏䘠剉ⵅ䥆䡇䥔䝎圠剏⁋匠䍅䥔乏䌭㴠L 畓⁢†潔慴䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃†䬽佔䅔⁌䥃䥖⁌䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃†⠽䑁⁄但⁒㠱‥升⁔䵉䱐䵅久䅔䥔乏⠠⸵㘳⤥‽k 畓⁢†潔慴䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃⬠䔠䕌呃䥒䅃⁌佗䭒†䕓呃佉⁎䐨 㴠(吀呏䱁䘠剏䔠䕌呃䥒䅃⁌佗䭒†䕓呃佉⁎䐨 ਽吠瑯污†㴠匀䍅䥔乏‭⁄䥆䕒䘭䝉呈义⁇Z匀䉕吠呏䱁†䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫商乒呉剕⁅⁃†‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥄†࠽㠱ㄮ⸷䄱R刁攀渀漀瘀愀琀椀漀渀 ☀ 唀瀀最爀愀搀愀琀椀漀渀 漀昀 䈀匀䘀䌀 䠀攀愀搀 漀昀昀椀挀攀 匀椀琀甀愀琀攀搀 愀琀 琀栀攀 㠀琀栀 䘀氀漀漀爀 ᔀ䜉 ᔀ㸉〉䴉⼉ 簀 ␀义剆十剔䍕啔䕒䐠噅䱅偏䕍呎䄠呕佈䥒奔#⠀⁁佇䕖乒䕍呎传⁆䥂䅈⁒乕䕄呒䭁义⥇儀何䥔䝎匠䕈呅䘠剏䈠䑉䕄卒ሠ慎敭漠⁦潃瑮慲瑣牯䄀摤敲獳漠⁦潃瑮慲瑣牯䔀洭楡䑉漠⁦潃瑮慲瑣牯圀慨獴灡⁰湅扡敬⁤䴊扯汩⁥畎扭牥匀潮ီ獅楴慭整⁤流畯瑮刀瑡⁥畑瑯摥戠⁹潃瑮慲瑣牯 ─䄠潢敶䈯汥睯#吀呏䱁儠何䕔⁄䵁問呎ਠ獒⠮湉䘠杩牵⥥"吀呏䱁儠何䕔⁄䵁問呎 獒⠮湉圠牯獤ᬩ潔慴捓敨畤敬䄠潭湵⁴刨⹳Ἡ潔慴潎⵮捓敨畤敬䄠潭湵⁴刨⹳ഩ潔戠⁥畑瑯摥ᄡ佔䅔⁌䵁問呎刊⹳ਠ慐瑲捩汵牡Q刁攀渀漀瘀愀琀椀漀渀 ☀ 唀瀀最爀愀搀愀琀椀漀渀 漀昀 䈀匀䘀䌀 䠀攀愀搀 漀昀昀椀挀攀 匀椀琀甀愀琀攀搀 愀琀 琀栀攀 㠀琀栀 䘀氀漀漀爀 ᔀ䜉 ᔀ㸉〉䴉⼉ 簀؀䥓丠⹯一呉ⴠ㈠⼳䕔⽎䑉⽁㘲í儀潵整⁤慒整䤠楆畧敲刨⹳ 琨敨焠潵整⁤慲整猠潨汵⁤敢椠据畬楳敶漠⁦污慔數⽳散獳‬潒慹瑬ⱹ匠楥湧牯条⁥敦ⱥ䌠牡楲条⁥景洠瑡牥慩獬‬牔湡灳牯瑡潩潣瑳漠⁦污慭整楲污⁳牦浯猠畯捲獥琠潷歲猠瑩ⱥ愠汬漠敶桲慥獤攠捴‮潣灭敬整椠污敲灳捥⥴ì儀潵整⁤慒整䤠潗摲⠠獒⤮⠠桴⁥畱瑯摥爠瑡⁥桳畯摬戠⁥湩汣獵癩⁥景愠汬吠硡獥振獥ⱳ删祯污祴‬敓杩潮慲敧映敥‬慃牲慩敧漠⁦慭整楲污ⱳ吠慲獮潰慲楴湯挠獯⁴景愠汬洠瑡牥慩獬映潲潳牵散⁳潴眠牯楳整‬污癯牥敨摡⁳瑥⹣挠浯汰瑥⁥湩愠汬爠獥数瑣畑瑯摥䄠潭湵⁴刨⹳ 琨敨焠潵整⁤慲整猠潨汵⁤敢椠据畬楳敶漠⁦污慔數⽳散獳‬潒慹瑬ⱹ匠楥湧牯条⁥敦ⱥ䌠牡楲条⁥景洠瑡牥慩獬‬牔湡灳牯瑡潩潣瑳漠⁦污慭整楲污⁳牦浯猠畯捲獥琠潷歲猠瑩ⱥ愠汬漠敶桲慥獤攠捴‮潣灭敬整椠污敲灳捥⥴ɓ䈀牯湩Ⱨ瀠潲楶楤杮愠摮椠獮慴汬湩⁧潢敲⁤慣瑳椭⵮楳畴爠楥普牯散⁤散敭瑮挠湯牣瑥⁥楰敬⁳景朠慲敤䴠㈭‵景猠数楣楦摥搠慩敭整⁲湡⁤敬杮桴戠汥睯琠敨瀠汩⁥慣⁰潴挠牡祲愠猠晡⁥潷歲湩⁧潬摡渠瑯氠獥⁳桴湡猠数楣楦摥‬硥汣摵湩⁧桴⁥潣瑳漠⁦瑳敥敲湩潦捲浥湥⁴畢⁴湩汣摵湩⁧桴⁥潣瑳漠⁦潢楲杮眬瑩⁨敢瑮湯瑩⁥潳畬楴湯愠摮琠浥潰慲祲挠獡湩⁧景愠灰潲牰慩整氠湥瑧⁨潦⁲敳瑴湩⁧畯⁴湡⁤敲潭慶景猠浡⁥愠摮琠敨氠湥瑧⁨景琠敨瀠汩⁥潴戠⁥浥敢摤摥椠桴⁥楰敬挠灡攠捴‮污潣灭敬整‬椠据畬楤杮爠浥癯污漠⁦硥慣慶整⁤慥瑲⁨楷桴愠汬氠晩獴愠摮氠慥獤⠠敌杮桴漠⁦楰敬映牯瀠祡敭瑮猠慨汬戠⁥敭獡牵摥甠瑰潢瑴浯漠⁦楰敬挠灡⸩Ê倀潲楶楤杮愠摮映硩湩⁧潦汬睯湩⁧慣慰楣祴戠獵慢⁲档浡敢⁲楷桴㐠猠牴灩⁳景猊極慴汢⁥楳敺洠摡⁥景挠灯数Ⱳ栠慥祶搠瑵ⱹ挠浯汰瑥⁥楷桴愠汬愠捣獥潳楲獥椠据畬楤杮挠湯敮瑣潩獮‬慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥 alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi 10 Each 708.4

alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi 10 Each 594.8

alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi 20 Each 500.4

17.34 Providing and fixing toilet paper holder :

17.34.1 C.P.brass 4 Each 550.7

Rectangular type with openable circular lid

17.35 Providing and fixing soil, waste and vent pipes:

A 17.35.1 100mm dia

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as/IS: 3989 40 Mtr. 1036.5

B 17.35.2 75mm dia

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989 30 Mtr. 907.3

17.37 Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc.

A 17.37.1 For 100 mm dia pipe 20 Each 178.5

B 17.37.2 For 75 mm dia pipe 15 Each 174.5

17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Centrifugally cast (spun) iron S & S pipe as per IS: 3989 10 Each 597.6

17.39 Providing and fixing plain bend of required degree.

17.39.1.2 Centrifugally cast (spun) iron S & S pipe as per IS: 3989 20 Each 439.7

17.43 Providing and fixing single equal plain junction of required degree with acesses door, insersion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS 3989 20 Each 731.4

17.44 Providing and fixing single equal plain junction of required degree.

17.44.1.2 Sand cast iron S&S as per IS 3989 20 Each 707.3

17.44.2.2 Sand cast iron S&S as per IS 3989 20 Each 498.9

17.48 Providing and fixing single unequal plain junction of required degree.

17.48.1.2 Sand cast iron S&S as per IS 3989 20 Each 841.1

17.56 Providing and fixing terminal guard.

17.56.1.2 Sand cast iron S&S as per IS 3989 10 Each 439.7

17.56.2.2 Sand cast iron S&S as per IS 3989 5 Each 311.6

17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS 3989 10 Each 439.7

17.57.2.2 Sand cast iron S&S as per IS 3989 5 Each 271.4

17.58 Providing lead caulked joints to sand cast iron / centrifugallly cast (spun) iron pipes and fittings of diametre:

17.59 Providing and fixing M.S stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diametre.

17.6 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.

17.60.1 100mm inlet and 100mm outlet

17.60.1.1 Sand cast iron S&S as per IS 3989 10 Each 1129.2

17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

18.58 Providing and fixing 125 mm dia, 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 20 Each 169.7

12.78 Providing and fixing on wall face unplasticised-PVC(working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

A 12.78.1 75mm diameter 20 Mtr. 162.7

B 12.78.2 110 mm diameter 15 Mtr. 257.5

12.79 Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.3 Single tee with door

12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete.

12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. 8 Each 189.4

S.H. - III : INTERNAL WATER SUPPLY

18.12 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Exposed on walls

a 18.12.1 15 mm dia nominal bore 0 Mtr. 197.6

b 18.12.2 20mm dia nominal bore 0 Mtr. 245.4

c 18.12.3 25mm dia nominal bore 30 Mtr. 342

d 18.12.4 32mm dia nominal bore 30 Mtr. 381.7

e 18.12.5 40 mm dia nominal bore 30 Mtr. 476.8

f 18.12.6 50mm dia nominal bore 25 Mtr. 572.6

g 18.12.7 65mm dia nominal bore 20 Mtr. 667.7

h 18.12.8 80mm dia nominal bore 25 Mtr. 818.2

18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

a 18.40.1 15 mm dia nominal bore 0 Mtr. 6.7

b 18.40.2 20mm dia nominal bore 0 Mtr. 7.8

c 18.40.3 25mm dia nominal bore 30 Mtr. 10

d 18.40.4 32mm dia nominal bore 30 Mtr. 11.8

e 18.40.5 40 mm dia nominal bore 30 Mtr. 13.4

f 18.40.6 50mm dia nominal bore 25 Mtr. 15.8

g 18.40.7 65mm dia nominal bore 20 Mtr. 19.4

h 18.40.8 80mm dia nominal bore 25 Mtr. 22.5

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.5 40 mm nominal outer dia Pipes 25 Mtr. 538.4

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.

Concealed work including cutting chases and making good the walls etc.

a 18.8.1 15mm nominal outer dia pipes 50 Mtr. 278.2

b 18.8.2 20mm nominal outer dia pipes 40 Mtr. 350.8

c 18.8.3 25mm nominal outer dia pipes 30 Mtr. 463.1

d 18.8.4 32mm nominal outer dia pipes 20 Mtr. 549.8

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a 18.17.1 25 mm nominal bore 4 Each 532.3

b 20 mm nominal bore 0 Each 465.4

c 18.17.2 32 mm nominal bore. 2 Each 589.9

11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

a 11.1 40 mm dia 4 Each 3368

b 11.2 50 mm dia 1 Each 3385

c 11.3 65 mm dia 1 Each 3864

d 11.4 80mm dia 1 Each 4588

e 11.5 100mm dia 0 Each 6056

15 Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

a 15.1 80mm dia 1 Each 4325

b 15.2 100mm dia 1 Each 6048

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,utlet and overflow pipes but without fittings and the base support for tank 3000 Per litre 9.7

S.H -IV: EXTERNAL SEWERAGE SYSTEM WORK

2.1 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

2.10.1 All kind of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 60 Mtr. 391.7

2.11 "Extra for excavating trenches for pipes, cables etc.in all kinds of soil for depth exceeding 1.5 m , but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 meter.)

2.11 All kind of soil

2.11 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 30 Mtr. 126.2

2.12 Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 3.0 m in depth but not exceeding 4.5 m.(Rate is over corresponding basic item for depth upto 1.5 Metre.)

2.12 All kind of soil

2.12 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 4 Mtr. 316.6

18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :

18.27.3 150 mm diameter 10 Mtr. 1776.8

18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :

18.28.3 150 mm diameter 15 Mtr. 337.4

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

a 19.1.1 100 mm diameter 0 Mtr. 280.6

b 19.1.2 150 mm diameter 30 Mtr. 464.3

c 19.1.3 200 mm diameter 0 Mtr. 682.6

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) all-round S.W. pipes including bed concrete as per standard design.

a 19.2.1 100 mm diameter 0 Mtr. 404.3

b 19.2.2 150 mm diameter 30 Mtr. 494.4

c 19.2.3 200 mm diameter 0 Mtr. 576.3

19.4 Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as/standard design.

19.4.3 180x150 mm size P type

19.4.3.2 With Sewer bricks conforming to IS : 4885 2 Each 2006.9

19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With F.P.S. bricks (For Sewer) 2 Each 7914.7

19.8 Extra depth for manholes

19.8.1 Size 90 x 80 cm

19.8.1.1 F.P.S. bricks (For Sewer) 2 Each 5660

19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

With Sewer bricks conforming to IS : 4885 (For Sewer) 2 Each 7090

19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom)

With Sewer bricks conforming to IS : 4885 (For Sewer) 2 Mtr. 4917.95

19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 10 Each 310.9

S.H -V: EXTERNAL STORM WATER DRAINAGE WORK

2.1 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

2.10.1 All kind of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 60 Mtr. 391.7

2.11 "Extra for excavating trenches for pipes, cables etc.in all kinds of soil for depth exceeding 1.5 m , but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 meter.)

2.11.1 All kind of soil

2.11 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 50 Mtr. 126.2

2.12 Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 3.0 m in depth but not exceeding 4.5 m.(Rate is over corresponding basic item for depth upto 1.5 Metre.)

2.12 All kind of soil

2.12 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 10 Mtr. 316.6

19.6 Providing, laying Non pressure NP2 class (light duty) RCC Pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete.

a 19.6.2 150mm dia RCC pipe 40 Mtr. 410.7

b 19.6.3 250mm dia RCC Pipe 30 Mtr. 677.4

c 19.6.4 300mm dia RCC Pipe 10 Mtr. 780

d 19.6.5 450mm dia RCC Pipe 0 Mtr. 1318.8

e 19.6.6 500mm dia RCC Pipe 0 Mtr. 1570.8

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) all-round S.W. pipes including bed concrete as per standard design.

a 19.2.2 150 mm diameter 30 Mtr. 494.4

19.3 Providing and laying cement concrete 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 20mm nominal size) up to haunches of SW/RCC Pipes including bed concrete as/standard design:

a 19.3.4 250mm dia RCC Pipe 25 Mtr. 426.1

b 19.3.5 300mm dia RCC Pipe 6 Mtr. 491.7

4.1 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 20 mm nominal size) alround stoneware/RCC pipes including in bed for pipes to be laid in trenches as per standard details.

4.1.10 1:5:10(1 Cement :5 coarse sand:10 graded stone aggregate 20 mm nominal size) 2 cum 2731.5

This item for 300 & 450 mm diameter RCC pipe alround, haunches & bed concrete as per standard design:

19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With F.P.S. bricks (For Sewer) 3 Each 7914.7

19.8 Extra depth for manholes

19.8.1 Size 90 x 80 cm

19.8.1.1 F.P.S. bricks (For Sewer) 2 Each 5660

19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

With Sewer bricks conforming to IS : 4885 (For Sewer) 1 Each 7090

With Sewer bricks conforming to IS : 4885 (For Sewer) 1 Mtr. 4917.95

19.11 Constructing brick masonry circular type manhole 1.2 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)

19.11.1.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (For Storm) 1 Each 13865

19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom)beyond 1.68 m to 2.29 m :

19.12.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (For Storm) 1 Mtr. 6283.7

19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 8 Each 310.9

19.27 Constructing brick masonary road gully chamber 50x45x60cm with bricks of class designation 75 in cement morter 1:4 (1 cement : 4 coarse sand) including 500 x 450mm precast RCC horizontal grating complete as per standard design

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 4 Each 3743.3

S.H -VI: EXTERNAL WATER SUPPLY WORK

18.12 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Exposed on walls

a 18.12.3 25mm dia nominal bore 0 Mtr. 342

b 18.12.4 32mm dia nominal bore 0 Mtr. 381.7

c 18.12.5 40 mm dia nominal bore 0 Mtr. 476.8

d 18.12.6 50mm dia nominal bore 0 Mtr. 572.6

e 18.12.7 65mm dia nominal bore 20 Mtr. 667.7

f 18.12.8 80mm dia nominal bore 30 Mtr. 818.2

18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

a 18.40.3 25mm dia nominal bore 0 Mtr. 10

b 18.40.4 32mm dia nominal bore 0 Mtr. 11.8

c 18.40.5 40 mm dia nominal bore 0 Mtr. 13.4

d 18.40.6 50mm dia nominal bore 0 Mtr. 15.8

e 18.40.7 65mm dia nominal bore 20 Mtr. 19.4

f 18.40.8 80mm dia nominal bore 30 Mtr. 22.5

18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :

a 18.41.3 25mm dia nominal bore 0 Mtr. 21.1

b 18.41.4 32mm dia nominal bore 0 Mtr. 21.6

c 18.41.5 40mm dia nominal bore 0 Mtr. 21.9

d 18.41.6 50mm dia nominal bore 0 Mtr. 22.7

e 18.41.7 65mm dia nominal bore 20 Mtr. 35.8

f 18.41.8 80mm dia nominal bore 30 Mtr. 36.9

11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

a 11.2 50 mm dia 0 Each 3385

b 11.3 65 mm dia 1 Each 3864

c 11.4 80mm dia 3 Each 4588

14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

a 14.2 50 mm dia 0 Each 5390

b 14.3 65 mm dia 0 Each 6024

c 14.4 80 mm dia 2 Each 7287

18.59 Providing & fixing C.I. double acting air valve of approved quality with bolt, nuts, rubber insertions etc. complete. (The tail piece if required will be paid separately)

a 18.59.2 80 mm dia Nominal bore 2 Each 6085.8

18.6 Providing & fixing enclosed type water meter (bulk type) conforming to IS:2373 and tested by municipal board complete with bolts, nuts, rubber insertions etc.(The tail piece if required will be paid separately)

18.60.1 80 mm dia Nominal bore 1 Each 3533.7

18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 100A 1 Each 13559.9

S.H. I : INTERNAL FIRE FIGHTING/SPRINKLER SYSTEM

7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

a 7.1 25 mm dia 800 Mtr. 359

b 7.2 32 mm dia 106 Mtr. 417

c 7.3 40 mm dia 220 Mtr. 509

d 7.4 50 mm dia Mtr. 646

e 7.5 65 mm dia Mtr. 832

f 7.6 80 mm dia Mtr. 951

g 7.7 100 mm dia Mtr. 1316

h 7.8 150 mm dia Mtr. 1856

i 7.9 200 mm dia 25 Mtr. 2692

9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required:

9.2 Single headed Stainless steel 10 set 5722

16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

16.2 Stainless Steel (Grade 304) 20 set 4445

17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket :

18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:

18.2 Stainless Steel (Grade 304) 10 Nos. 1631

20 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and Painting with synthetic enamel paint of approved shade as required. 4 set 17707

21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

21.2 Pendent Sprinkler/Upright Sprinkler 150 Each 408

21.3 Horizontal side wall sprinkler 0 Each 505

23 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

23.1 100 mm dia 0 Each 7111

23.2 150 mm dia 4 Each 8634

24 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required

24.1 150mm dia 1 Each 47728

25 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

S.H. II : EXTERNAL FIRE HYDRANT SYSTEM PIPES & ACCESSORIES

6 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

10.2 Single headed Stainless steel 4 set 5722

13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 4 Each 1236

19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

19.2 4 way - 150 mm dia M.S. Pipe 3 Each 13636

22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 2 Each 1442

S.H. I : WIRING

1.3.3 Group C 210 Point 1146

Group C 300 Each 609

2.12 S/F 'C' series, SP MCB: Supplying and fixing following rating, 240/415 volts, 'C' curve, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) 2.12.1 6/32 amps, single pole 72 Each 237

(c ) 2.12.3 40 amps, single Pole and neutral 25 Each 1044

2.2 Providing and fixing M.V danger notice plate of 200mmx150mm made of mild steel at least 2mm thick, vitreius enameled white on both side and with inscription in singale red colour on front side in excluding cubical panel as required. 2 Each 214

2315 Providing and fixing C.T. coil as per require load in amps in side in excluding cubical panel as required. 0 Each 800

2314 Providing and fixing slector switch for analog ammmeter as per require load in amps on front side in excluding cubical panel as required. 0 Each 300

2313 Providing and fixing Pilot lamp for indicator on front side in excluding cubical panel as required. 0 Each 148

3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 80 Mtr. 144

7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Supply & Intallationof VRV system Air-Conditioning Systems

b 300 mm width X 50 mm depth X 1.6 mm thickness 100 866

c 150 mm width X 50 mm depth X 1.6 mm thickness 150 686

1 Providing and fixing Diamond Grey finish system aluminium doors & windows of Fenesta/AIS/Eternia series of Hindalco with the company having its own/ fabrication facility and control the entire cycle from Fabrication to installation to post sales services. Aluminum profile frame should be powder coated of 65-90 microns, using vertical coating process from a QUALICOAT certified facility and profile must undergo sublimation process for transferring patterns on it. Window and doors profile must be of high grade 6063 T6 and gauge shoul vary from 1.2 mm to 4.5 mm as per the design & system requirement. All hardware fitted must be of SS 304 grade except handle to be of zinc/aluminium alloy casted and powder coated with weather seal (EPDM/TPE). There shall be Warranmty of 10 years on profile & hardware from the date of installation along with 4/5/6 mm clear transparent/ tinted/equivalent toughened glass as per approval. Two track two panel sliding window without mesh of outer frame 45mm x 37.5 mm and sash 28mm x 58 mm both having wall thickness of 1.2 mm to 1.4 mm and single glazing bead of appropriate dimension for 4/5/6 mm toughened glass as per approved drawings and instruction of Engineer-in-charge. Sqm

NS-2 Supplying fitting and fixing of Marvel /Hunter Douglas/D'decor Make Roller Blinds as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of Engineer-in-Charge. Sqm

N.S-3A Providing and fixing wooden door Latch with necessary screws etc. complete. Each

Providing and fixing wooden door handle with necessary screws etc. complete.

N.S Supplying fitting and fixing Glass door handles, H-Type (QBGHL-5) Ozone/Hettich/Hafle make made up of Stainless Steel brushed steel finish 300 mm heigh/equivalent make all complete including taxes and royalty as per approval and direction of E/I. Each

Providing & fixing double skin laminated both side WPC partition upto specified height with 1.0 mm lamination of greenply/ marino/ century mica over 12 mm thick WPC of Alstone/ greenply / CENTURY (MIN WT. 550KG/cum) make fitted and fixed both sides over aluminium frame of 50 x 50mm posts at 60 cm centres and 50x50mm horizontal members at approx 60 cm centers including cost of anchoring the partition to floors, walls and ceiling properly as per drawing including making hidden doors as per drawing all complete as per drawing, specifications and direction of E/I. Sqm

S.H. - I : SANITARYWARE & C.P FITTINGS

S.H. - III : INTERNAL WATER SUPPLY

N.S Providing and fixing brass Single acting air valve PN 1.6 of approved quality with bolts, nuts, rubber insertion, tail pieces, tapers etc. if required as complete.

25 mm dia 1 Each

a N.S 25 mm dia 0 Each

b N.S 32 mm dia 0 Each

c N.S 40 mm dia 1 Each

d N.S 50 mm dia 0 Each

e N.S 65 mm dia 0 Each

S.H. I : INTERNAL FIRE FIGHTING/SPRINKLER SYSTEM

N.S Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front.

Approximate size 2100x1200x600 mm. 8 Each

N.S Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. 8 Each

N.S Supply, Installation, Testing & Commissioning of 'ABC' stored pressure type Dry chemical powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683, 6.0 Kg. 8 Each

N.S Supply, Installation, Testing & Commissioning of ISI marked (IS:10204) trolly mounted Fire Extinguisher, mechanical foam type capacity 50 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension. 1 Each

S.H. II : EXTERNAL FIRE HYDRANT SYSTEM PIPES & ACCESSORIES

External Piping

a 100 mm dia 0 Mtr.

b 80 mm dia 50 Mtr.

S.H. III : FIRE PUMPS,VALVES & ACCESSORIES

NS 4 core x 2.5 Sq.mm.copper conductor Aluminium Armoured control cable 4 Each

NS Supply, Laying, Fixing, Testing and Commissioning of following sizes of XLPE insulated PVC sheathed armoured Copper/aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.

a.) 4 core x 2.5 Sq mm copper conductor armoured control cable. 125 Mtr.

b.) 3 core x 16 Sq.mm. Aluminium Armoured Cable 75 Mtr.

c.) 3 core x 70 Sq.mm. Aluminium Armoured Cable 50 Mtr.

a.) 65 mm dia 2 Each

b.) 80mm dia 2 Each

c.) 100mm dia 2 Each

d.) 150 mm dia 3 Each

e.) 200 mm dia 3 Each

a.) 25mm dia 4 Each

b.) 50mm dia 2 Each

c.) 65mm dia 2 Each

NS Providing, fixing, testing and commissiong of standard mild steel flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as/ IS 6392 table E.

a.) 200mm dia 12 Each

b.) 150mm dia 22 Each

c.) 100mm dia 6 Each

d.) 80mm dia 12 Each

e.) 65mm dia 6 Each

f.) 50mm dia 6 Each

NS Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, sprinkler pump and Jockey pump at drop of pressure, automatically at required pressure setting :

Recommended dia. : 450mm

Height of shell : 2000mm

Item No. Description Amount

Cost of Renovation & upgradation Works for Estab.of co-working space-startup business centre at BSFC Building. 8th floor

2 Cost of Electrical Works

3 Cost of Furniture Works

4 Cost of Airconditioning Works

5 Cost of EPABX Works

6 Cost of CCTV & Networking & UPS Works

7 Cost of Fire Fighting Works

Item No. Ref. Item Unit Rate Quantity Amount

11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement motar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.

A 11.41A.2 Glazed Vitrified floor tile polished finish of size

11.41A.2.2 Size of Tile 600 x1200 mm (for wall toilet) &198 x 1200 mm (for floor meeting room) sqm 1356

B 11.41A.3 Glazed Vitrified tile Matt/ Antiskid finish of size

11.41A.3.1 Size of Tile 600 x 600 mm (for floor toilet) sqm 1054.3

11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement and matching pigments etc., complete.

11.41.3 Size of Tile 80x80 cm. sqm 2116.5

11.42 Add/Deduct for levelling of floor using 20 mm thick cement mortar sqm 480.6

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.

8.2.2 Granite of any colour and shade

8.2.2.2 Area of slab over 0.50 sqm sqm 4401.2

8.3 Extra for providing edge moulding to 19 mm thick marble stone counters, Vanities etc. over item no. 8.2 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite work

8.3.2 Granite work Mtr. 260.1

26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.

26.27.2 With 20mm thick beveled tegular mineral fibre false ceiling tile (NRC0.7). Sqm. 2120.7

12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.

12.5 mm thick tapered edge gypsum moisture resistant board Sqm 993 80

12.62 Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. Sqm 283

NS-1 Providing and fixing Diamond Grey finish system aluminium doors & windows of Fenesta/AIS/Eternia series of Hindalco with the company having its own/ fabrication facility and control the entire cycle from Fabrication to installation to post sales services. Aluminum profile frame should be powder coated of 65-90 microns, using vertical coating process from a QUALICOAT certified facility and profile must undergo sublimation process for transferring patterns on it. Window and doors profile must be of high grade 6063 T6 and gauge shoul vary from 1.2 mm to 4.5 mm as per the design & system requirement. All hardware fitted must be of SS 304 grade except handle to be of zinc/aluminium alloy casted and powder coated with weather seal (EPDM/TPE). There shall be Warranmty of 10 years on profile & hardware from the date of installation along with 4/5/6 mm clear transparent/ tinted/equivalent toughened glass as per approval. Two track two panel sliding window without mesh of outer frame 45mm x 37.5 mm and sash 28mm x 58 mm both having wall thickness of 1.2 mm to 1.4 mm and single glazing bead of appropriate dimension for 4/5/6 mm toughened glass as per approved drawings and instruction of Engineer-in-charge. Sqm 18611

NS-2 Supplying fitting and fixing of Marvel /Hunter Douglas/D'decor Make Roller Blinds as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of Engineer-in-Charge. Sqm 2953

9.1 Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:

9.1.1 Second class teak wood cum 120526.6

9.21 Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm 1775.3

9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protectivesurface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality

9.127.2 1.0 mm thick sqm 669

9.74 Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.

N.S-3A Providing and fixing wooden door Latch with necessary screws etc. complete. Each 3422 18

N.S-3B Providing and fixing wooden door handle with necessary screws etc. complete.

A 300 mm Each 9445 12

B N.S-3C 450 mm Each 15057 6

9.82 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. Each 108.1 18

9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (best make of approved quality) with necessary accessories and screws etc. complete. Each 810.1 14

21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter/partition of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer -in- charge ( Door handle , lock, and stopper etc . to be paid separately). Sqm 5143

N.S-4 Supplying fitting and fixing Glass door handles, H-Type (QBGHL-5) Ozone/Hettich/Hafle make made up of Stainless Steel brushed steel finish 300 mm heigh/equivalent make all complete including taxes and royalty as per approval and direction of E/I. Each 3125 7

21.4 Providing and fixing double action hydraulic floor spring of apporoved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body/ plate with duble spring mechanism and door weight upto 125 kg, for doors, inculding cost of cutting floors, embedding in floors as reqired and making good the same matching to the exisiting floors finising and cover plates with brass pivot and single pece M.S sheet outer box slide plate etc. complete asper the direction of Engineer-in - charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thinckness Each 2283.8 7

9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG GI sheet ( Zinc coating not less than 120gm/m²) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes Fire Rated Door Shutters. The frame is fitted with intumuscent fire seal trip of size 10x4 mm minimum alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per directions of Engineer - in- charge . (Dash fastener to be paid for separately). Mtr. 1462.7

9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 min Fire Rating confirming to IS:3614 (Part II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles,lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120gm/m²) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). Sqm 6445

9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators & partitions etc., with G.I. beading of appropriate size,made out of 20 SWG G.I. sheet (zinc coating not less than120 gm/m²)fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc, complete in all respect as per direction of Engineer-incharge.(Actual glass size is to be measured at site for payments).

9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance Sqm 31796.3

9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Each 7061.5

N.S.-5 Providing & fixing double skin laminated both side WPC partition upto specified height with 1.0 mm lamination of greenply/ marino/ century mica over 12 mm thick WPC of Alstone/ greenply / CENTURY (MIN WT. 550KG/cum) make fitted and fixed both sides over aluminium frame of 50 x 50mm posts at 60 cm centres and 50x50mm horizontal members at approx 60 cm centers including cost of anchoring the partition to floors, walls and ceiling properly as per drawing including making hidden doors as per drawing all complete as per drawing, specifications and direction of E/I. Sqm 6603

6.1A Brick work with bricks of class designation 100A in foundation and plinth in:

6.1.14A cement mortar 1:6 (1 cement : 6 coarse sand) cum 4819.9

6.3A Extra for Brick work in superstructure above plinth level upto floor V cum cum 842.2

6.18A Half brick masonry with bricks of class designation 100A in foundations and plinth in:

6.18.4A cement mortar 1:4 (1 cement : 4 coarse sand) Sqm. 599.3 150

6.19A Extra for half Brick masonry in superstructure above plinth level upto floor V level. Sqm. 89.7

6.21A Extra for providing and placing in position 2 Nos, 6mm dia, MS bars at every third course of half brick masonry (with F.P.S. brick) Sqm. 113.6

13.11 Cement plaster in course sand 12mm cement plaster of mix :

13.11.2 1:4 (1Cement : 4 Coarse sand) Sqm. 152.9 250

14.1.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground, all complete as per direction of E/I. Cement mortar 1:4. sqm 237.2

13.74 Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repair scratches etc. complete sqm 7.7 400

13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 105.4

13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

13.92.1 Two or more coat on new surface. Sqm 86.4 1000

9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.

9.48.1 Fixed to steel windows by welding. kg 144.5

13.94 Painting with sythetic enamel paint of approved brand and manufacture to give an even shade.

13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Sqm. 116.5

15.12 Dismantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage holdfasts etc.complete and stacking within 50 metres lead:

15.12.2 Of area beyond 3 sqm Each 208.8 32

15.23 Dismantling tile works in floor and roofs laid in cement mortar including stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and upto 40 mm Sqm 47.5 685

15.3 Demolishing R.C.C work including stacking of steel bars and disposal of unserviceable materials within 50 metres lead : cum 1411.2 10

15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable materials within 50 metres lead :

15.7.4 In cement mortar cum 823.7 30

15.6 Disposal of building rubbish/malba/similar unserviceable,dismantled or waste waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 219.3 200

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work upto plitn level: 1:2:4(1Cement :2 Coarse sand:4 graded tone aggregate 20mm nominal size) cum 3998.1

5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). cum 5335.9

5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding complete.

A 5.22.7A Thermo-Mechanically Treated barsTMTC-500-8mm dia Kg. 94.5

B 5.22.7B Thermo-Mechanically Treated barsTMTC-500-10mm dia Kg. 92.6

5.9 Centering and shuttering including strutting,propping etc and removal of form for:

B 5.9.3 Suspended floors, roots, landings, balconies and access platform sqm 437.5 30

C 5.9.5 Lintels,Beams,Plinth beams,girders,bressumers and cantilevers. sqm 404.7

22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and thelike consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3 (iii) litrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area. (iv) lvth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). sqm 480.6

15.27 Demolishing mud phaska in terracing and disposal of material within 50 mtr lead. cum 369.1 70

CARRIAGE OF MATERIAL (TENTATIVE)

A Coarse sand (45 km lead from koelwar) Cum. 1001.5

B Local Sand (Lead =3 km.) Cum. 248.86

C Stone Chips (110 km lead from Gaya) by Road Cum. 2166.3

D Bricks (Lead =8 km.) Per 1000 1091.92

EXTRA FOR MATERIALS

E Add for Cement MT 266

F Add for Bricks Per 1000 1223

TOTAL CIVIL WORKS =

S.H. - I : SANITARYWARE & C.P FITTINGS

17.1 Providing and fixing white vitreous china water closet squatting pan (Indian type WC pan) with 100mm sand cast Iron P or S Trap, 10 litre low level PVC flushing cistern (of approved make) with fittings CI/MS brackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

17.1.1 White vitreous china Orissa pattern WC pan of size 580 x 440mm with intergal type foot rests. Each 4470.9 1

17.3 Providing and fixing white vitreous china pedestal type water coset (Europenan type) with seat and lid , 10 litre low level white vitreous china flusing cistern & C.P flush bend with fittings & C.I.brackets , 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municiple desine complete, including painting of fittings and brackets ,cutting and making good the wall and floiirs wherever required.

17.3.1 W.C pan with ISI marked white solid plastic seat and lid Each 5504.3 2

17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 3932.1 4

17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever as required. :

17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth 250 mm Each 5231.5 1

17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

17.28.2 Flexible pipe

17.31 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. Each 1068.5 5

17.34 Providing and fixing toilet paper holder :

17.34.1 C.P.brass Each 550.7 3

17.7 Providing and fixing PTMT Bottle Trap for wash basin and sink,

17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of waste coupling 77 mm breadth with 25mm minimum water seal, weighting not less than 260gms Each 325.1 6

17.70.2 Bottle trap 38mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of waste coupling 77 mm breadth with 25mm minimum water seal, weighting not less than 263gms Each 325.1 2

17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 146.3 2

17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Each 204.7 2

17.8 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Each 6534.2 3

8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone finished smooth.aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and

8.10.2 Granite Stone of approved shadeIProviding and fi Sqm 3542.9 2

18.21 椠桴⁥慰敮潢牡Ɽ洠歡湩⁧潣湮捥楴湯攠捴愮⁳敲畱物摥ਮș匀灵汰楹杮愠摮映硩湩⁧景映扡楲慣整⁤汅捥牴捩污挠湯牴汯瀠湡汥漠⁦畣楢汣⁥潣獮牴捵楴湯‬汦潯⁲ 慷汬洠畯瑮摥琠灹ⱥ映扡楲慣整⁤畯⁴景ㄠ‶坓⁇剃䅃猠敨瑥‬潣灭牡浴湥慴楷桴栠湩敧⁤潤牯ⱳ瀠睯敤⁲潣瑡摥瀠楡瑮湩⁧景愠灰潲敶⁤桳摡⁥晡整⁲‷慴歮琠敲瑡敭瑮瀠潲散獳‬慣汢⁥污敬ⱹ椠瑮牥慮楷楲杮攬牡桴湩⁧整浲湩污⁳畂⁳‭慢⁲档浡敢Ⱳ椠獮汵瑡牯愠摮挠浯汰瑥⁥湩愠汬爠獥数瑣攠捴愠摮瀠湡汥洠湡晵捡畴敲獲洠獵⁴敢愠灰潲敶⁤祢䌠剐⁉䈨瑵眠瑩潨瑵删䉙†湩楤慣潴Ⱳ愠浭瑥牥瘬汯浴瑥牥‬湩整⁲潣湮捥楴湯挠灯数⁲潣摮捵潴⁲慣汢⽥潳楬⁤潣灰牥猠牴灩‬睳瑩档敧牡⁳瑥⹣ŋ匀灵汰楹杮愠摮映硩湩⁧〲流⁰㐲‰潶瑬⁳偓⁎椠摮獵牴慩祴数猬捯敫⁴畯汴瑥‬楷桴㈠瀠汯⁥湡⁤慥瑲ⱨ洠瑥污攠据潬敳⁤汰杵琠灯愠潬杮眠瑩⁨〲愠灭⁳✧❃‧畣癲ⱥ匠⁐䍍⁂湩猠敨瑥猠整汥攠据潬畳敲‬湯猠牵慦散漠⁲湩爠捥獥ⱳ眠瑩⁨档楡敮⁤敭慴潣敶⁲潦⁲桴⁥潳正瑥漠瑵敬⁴湡⁤潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤䔀剁䡔义㍇
牐癯摩湩⁧档浥捩污洯湩牥污洠楡瑮湥湡散映敲⁥慥瑲楨杮猠獹整潣灭楲楳杮漠⁦潣灰牥挠慯整⁤慥瑲⁨汥捥牴摯⁥″敭牴⁥敬杮桴愠摮ㄠ⸷′浭漠瑵牥搠慩愠潬杮眠瑩⁨㔲欠⁧慥瑲⁨潣摮捵楴楶祴攠桮湡楣杮戠捡楦汬洠湩牥污挠浯潰湵⁤潦⁲慥瑲⁨汥捥牴摯⁥潴映汩灵琠敨攠捸癡瑡摥攠牡桴愠摮攠牡桴椠獮数瑣潩楰⁴瑥⹣愠⁳敲畱物摥栮牐癯摩湩⁧湡⁤楦楸杮㈠‵浭砠㔠浭挠灯数⁲瑳楲⁰湯猠牵慦散漠⁲湩爠捥獥⁳潦⁲潣湮捥楴湯⁳攠捴‮獡爠煥極敲⹤䤀华䅔䱌呁佉⁎䙏䘠塉啔䕒⩓
畓灰祬湩⁧湡⁤楦楸杮㐠砧〲眠瑡⁴䕌⁄戠瑡整楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯椠污浵湩畩潨獵湩⁧湡⁤潣灭敬整眠瑩⁨湩整牧瑡摥攠敬瑣潲楮⁣牤癩牥攠捴‮楤敲捣汴⁹湯眠污⽬散汩楬杮椠据畬楤杮†潣湮捥楴湯眠瑩⁨⸱‵煳‮浭‮剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲瑥⹣愠⁳敲畱物摥‮䘨牯渠湯爭獥摩湥楴污戠極摬湩⥧Ħ匀灵汰楹杮愠摮椠獮慴汬瑡潩景爠来汵牡猯慴摮牡⁤潭敤⹁⁃挠楥汬湩⁧慦景ㄠ〲‰浭猠敷灥眠瑩⁨敳癲捩⁥慶畬⡥䵃䴯⥍業楮畭⸴〰‬楁⁲敤楬敶祲洠湩浩浵㈠〱挠浵洯湩椠据畬楤杮眠物湩⁧桴⁥潤湷爠摯⁳景猠慴摮牡⁤敬杮桴⠠灵潴㌠‰浣 楷桴ㄠ㔮猠⹱洠⹭䘠䱒⁓噐⁃湩畳慬整⁤潣灰牥挠湯畤瑣牯†瑥⹣愠⁳敲畱物摥خ⸸㜱ㄮÔ匀灵汰⁹湡⁤湩瑳污慬楴湯漠⁦〳‰浭猠敷灥洠瑥污楬⁣汢摡ⱥ敨癡⁹畤祴‬楳杮敬瀠慨敳‬㌲‰⁖⹁⹃攠桸畡瑳映湡椠桴⁥硥獩楴杮漠数楮杮椠据畬楤杮洠歡湩⁧潧摯琠敨搠浡条ⱥ挠湯敮瑣潩整瑳湩Ⱨ挠浯業獳潩楮杮攠捴愠⁳敲畱物摥昮畓灰祬愠摮映硩湩⁧潦汬睯湩⁧祴数⁳氠浡⁰湩攠楸瑳湩⁧汥捥牴捩污†楦瑴湩獧⼠映硩畴敲⁳瑥⹣愠⁳敲畱物摥‮㘀ㄮ㐮? ‹ 〱眠瑡⁴䙃⁌慬灭††††††††††††⠠慍敫㨠‭桐汩灩⥳㘀ㄮ㜮= 〲眠瑡⁴䙃⁌灳物污氠浡⁰†††††††††⠠慍敫㨠‭桐汩灩⥳唀䑎剅䜠佒乕⁄䅃䱂义片ࠀ⸳‵潣敲㤠‵煳‮浭堠偌⽅噐⁃湩畳慬整⁤噐⁃桳慥桴摥⠠效癡⁹畤祴 愠浲畯敲⁤汥捥牴捩挠扡敬眠瑩⁨污浵湩畩潣摮捵潴⹲  㜀ㄮ㈮"䄀潢敶㌠‵煳‮浭愠摮甠瑰㔹猠⹱洠ᩭ佔䅔⁌但⁒䱅䍅剔䍉䱁圠剏卋‘匀灵汰⁹湡⁤湩瑳污慬楴湯漠⁦〴洰Ɑ㈠〳⁶⹁⹃慷汬振扡湩映湡椠据畬楤杮映硩湩⁧桴⁥牢捡敫ⱴ慭楫杮挠湯敮瑣潩Ɱ琠獥楴杮‬潣浭獩楳湯湩⁧瑥⁣獡爠煥極敲⹤ľ匀灵汰⁹湡⁤楦楸杮猠牵慦散爠捥獥⁳潭湵整⁤潦汬睯湩⁧祴数⁳䰠䑅搠睯楬桧整⁲楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯椠牰獥畳敲搠敩挠獡⁴污浵湩畩潨獵湩⁧湡⁤湩整牧瑡摥攠敬瑣潲楮⁣牤癩牥攠捴‮搠物捥汴⁹湯挠楥楬杮椠据畬楤杮挠湯敮瑣潩楷桴ㄠ㔮猠浱剆倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲慣汢⁥湡⁤慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥Ԡ⸵⸷࠱⼵‷慷瑴㔀㜮㔮㄀‸慷瑴ſ匀灵汰楹杮愠摮映硩湩⁧敲散獳洠畯瑮摥†㘳眠瑡⁴䕌⁄汦瑡瀠湡汥㈠砠㈠映⁴楷桴洠湩浩浵攠晦捩捡⁹〱‰浬眯眠楨档瀠潲楶敤⁳潳瑦氠杩瑨愠摮朠慬敲映敲⁥祳浭瑥楲慣汩畬業慮楴湯猠極慴汢⁥潦⁲牡獭牴湯⽧牧摩挠楥楬杮愠摮椠瑮来慲整⁤汥捥牴湯捩搠楲敶⁲瑥⹣搠物捥汴⁹湯映污敳挠楥楬杮椠据畬楤杮挠湯敮瑣潩獮眠瑩⁨⸱‵煳洮剆倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲慣汢⁥湡⁤慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥‮ 䕓呃佉ⵎ㩁䌠噉䱉†佗䭒 䕓呃佉ⵎ䈠›⹐⹈⁅圠剏ᵋ匠䍅䥔乏‭㩃䔠䕌呃䥒䅃⁌圠剏ᭋ匠䍅䥔乏䐭›商乒呉剕⁅圠剏≋匠䍅䥔乏‭㩅䄠剉佃䑎呉佉䥎䝎†佗䭒 䕓呃佉ⵎ䘠›偅䉁⁘圠剏⩋匠䍅䥔乏‭㩇䌠呃ⱖ䰠乁☠唠卐䤠噎剅䕔⁒佗䭒2 䕓呃佉ⵎ䠠›䥆䕒䐠呅䍅䥔乏䄠䑎䄠䅌䵒匠卙䕔⁍圠剏牐癯摩湩Ⱨ映扡楲慣楴湯☠椠獮慴汬瑡潩景㘠浭琠楨正䠠杩⁨牐獥畳敲氠浡湩瑡⁥⠠偈⥌氠浡湩瑡獥漠⁦灡牰癯摥搠獥杩景䔠瑸牥慩戠慲摮搠捥牯瑡癩⁥硥整楲牯朠慲敤搠獥杩敮⁲慬業慮整瀠湡汥映牯映捡摡⁥汣摡楤杮挠湯楦浲湩⁧潴䔠牵灯慥瑓湡慤摲䔠⁎㌴‸慰瑲嘠ⱉ䘠物⁥敒慴摲湥⁴片摡⁥䈠⁓汃獡⁳⹉吠敨搠獥杩慰数⁲桳污敢猠浡⁥湯戠瑯⁨楳敤⹳吠敨猠楡⁤慭整楲污猠慨汬戠⁥楦數⁤湯䄠畬業楮浵猠扵瑳畲瑣牵⁥楷桴ㄠ〰㠯洲⁘㠳浭堠㈠浭愠畬業楮浵†敲瑣湡畧敬⁲敳瑣潩獮眠瑩⁨湡摯穩湩⁧景㈠洰捩潲獮漠⁦桴⁥慳敭戠獡⁥潣潬牵漠⁦桴瑡漠⁦桴⁥偈⁌慬業慮整‮桔獥⁥敳瑣潩獮猠慨汬戠⁥楦數⁤楷桴䠠瑯䐠灩䜠污慶楮敺⁤牢捡敫⁴景†〵浭堠㔠洰⁘洵⹭䐠汵⁹楦數⁤楷桴映獡湴牥⁳⠠䥈呌⽉䘠卉䡃剅 景†〱浭堠㠠洰湯洠楡敢浡愠摮ㄠ洰⁘㔷浭瀠湩映獡湴牥⁳湯䈠楲正眠污⹬吠敨猠慰楣杮猠慨汬渠瑯戠⁥潭敲琠慨⸱洵牴‮卓䈠汯獴漠⁦〱浭堠ㄠ㔲浭 〱浭堠㜠洵潴戠⁥獵摥‮汁捳敲獷琠敢漠⁦卓‮慇癬湡穩摥挠慯楴杮猠慨汬戠⁥〶洠捩潲獮‮桔⁥污浵湩畩敳瑣潩獮琠敢†敶瑲捩污祬映硩摥漠桴⁥慷汬愠⁴〶洰⽣⹣吠楨⁳慣捬汵瑡潩獩戠獡摥漠楷摮瀠敲獳牵⁥景ㄠ〸欠⁧瑭獲⹱⠮䤠⁦桴⁥楷摮瀠敲獳牵⁥獩洠牯⁥桴湥愠捣牯楤杮祬琠敨瘠牥楴慣灳捡湩⁧桳污敢爠摥捵摥⤮吠敨戠慯摲猠慨汬戠⁥楦數⁤楷桴挠汯畯敲⁤楲敶獴⠠䉍⥅漠⁦桴⁥慳敭挠汯畯⁲景琠慨⁴景琠敨氠浡湩瑡⁥瑡愠搠獩慴据⁥景㘠〰浭挠振‮湉挠獡⁥桴⁥楦楮桳摥䠠杩⁨牐獥畳敲䰠浡湩瑡⁥䠨䱐 椠⁳潭敲琠慨〲洰牦浯琠敨眠污桴湥猠灥牥瑡⁥⽍⁓瑳畲瑣牵⁥桳污敢瀠潲楶敤⁤潴猠獵慴湩琠敨搠慥⁤潬摡漠⁦桴⁥桷汯⁥瑳畲瑣牵⁥污潣灭敬整椠据畬楳敶漠⁦污慴數⁳湡⁤畤祴†獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤搠物捥楴湯漠⁦湥楧敮牥椠档牡敧牐癯摩湩⁧湡⁤楦楸杮ㄠ′浭琠楨正䠠⁄楆牢⁥散敭瑮戠慯摲漠⁦硥整湲污眠污汣摡楤杮氠杩瑨朠畡敧猠整汥映慲敭⁤慦慣敤猠牴捵畴敲㔠‱浭琠楨正眠楨档椠据畬敤䔠敶敲瑳䜠污慶畬敭眠污牦浡⁥祳瑳浥⠠婁ㄭ〵㌬〰䴠慰礠敩摬猠牴湥瑧⥨挠浯牰獩湩⁧ㄵ洠牴捡牰景汩ⱥ〠㔮洠桴捩Ⱬ栠癡湩⁧睴煥慵汦湡敧⁳景㌠′浭愠摮瘠牥楴慣瑳摵⁳景猠穩⁥ㄵ洠Ɑ⸰‵浭琠楨正‬慨楶杮漠敮映慬杮⁥景㌠‶浭愠摮愠潮桴牥映慬杮⁥景㌠‴浭愠摮琠潷攠畱污氠灩⹳吠敨映慲敭猠慨汬戠⁥楦數⁤潴戠楲正眠污楷桴䴠⁓潷歲眠敨敲爠煥極敲⹤䔠敶敲瑳ㄠ′浭琠楨正栠慥祶搠瑵⁹楦牢⁥散敭瑮戠慯摲挠湯楦浲湩⁧潴䤠䥓㐠㘸㨲〲〰‬祔数䄠挠瑡来牯⁹噉愠摮朠灡眠汩敢映汩敬⁤楷桴猠汩捩湯瀠牥慭敮瑮祬‮椠据畬楳敶漠⁦污慴數⁳湡⁤畤祴†獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤搠物捥楴湯漠⁦湥楧敮牥椠档牡敧䄮楆楮桳湩⁧慷汬⁳楷桴琠硥畴敲⁤硥整楲牯瀠楡瑮漠⁦敲畱物摥猠慨敤㨠ܠ㌱㐮⸵舱敎⁷潷歲⠠吠潷漠⁲潭敲挠獯⁴灡汰敩⁤⁀⸳㠲氠牴ㄯ‰煳癯牥愠摮椠据畬楤杮瀠楲業杭挠慯⁴景攠瑸牥潩⁲牰浩牥愠灰楬摥䀠㈠㈮‰杫 〱猠浱+䌀獯⁴景瀠湡汥猠穩⁥⸳‰⁸⸲㐴洠牴㴮⸷㈳猠浱䈀獡捩删瑡⁥景吠敨†慍整楲污&㜀〳ⴶ䄠畬業楮浵匠捥楴湯⁳㘱杫⁳剀⁳㤱ℰ㌷㤸‭湁摯穩湩⁧㘱欠⁧⁀獒‮㠳欯⩧㘲㤰ⴠ䴠⁓慇癬湡穩摥䈠慲正瑥㔠欠⁧⁀〱⼴杫8㈀ㄶ″‭卓䈠汯獴眠瑩⁨慷桳牥漠⁦楳敺⁳ㄠ′潮⁳剀⁳㜳支捡⡨偈⁌硅整湲污䌠慬獤⁀獒㔮㘹⸷⼵煳⁸⸷㈳ 匀扵琠瑯污䄀摤映牯眠獡慴敧䀠㔠ᬥ摁⁤潦⁲牔湡灳牯慴楴湯䀠㈠ḥ摁⁤潦⁲升⁔癏牥䌠♐敃獳䀠ㄠ┸刀瑡⁥潦⁲⸷㈳匠浱㴠 刀瑡⁥敐⁲煳7刀瑡⁥敐⁲煓景䠠䱐倠湡汥楬杮⠠慓⥹㴠删⹳㐸㌱〮‰ 煓⹭5Ȉ †††††††††††††††††⹎⹓㈭††††††#/) 䈀獡捩删瑡⁥獡瀠牥焠潵慴楴湯 匀祡瀠牥猠浱ɘ䈀牯湩Ⱨ瀠潲楶楤杮愠摮椠獮慴汬湩⁧潢敲⁤慣瑳椭⵮楳畴爠楥普牯散⁤散敭瑮挠湯牣瑥੥楰敬⁳景朠慲敤䴠㈭‵景猠数楣楦摥搠慩敭整⁲湡⁤敬杮桴戠汥睯琠敨瀠汩⁥慣⁰潴ਠ慣牲⁹⁡慳敦眠牯楫杮氠慯⁤潮⁴敬獳琠慨灳捥晩敩Ɽ攠捸畬楤杮琠敨挠獯⁴景猠整汥爠楥普牯散敭瑮戠瑵椠据畬楤杮琠敨挠獯⁴景戠牯湩Ⱨ楷桴戠湥潴楮整猠汯瑵潩湡⁤†琊浥潰慲祲挠獡湩⁧景愠灰潲牰慩整氠湥瑧⁨潦⁲敳瑴湩⁧畯⁴湡⁤敲潭慶景猠浡⁥愠摮琠敨氠湥瑧⁨景琠敨瀠汩⁥潴戠⁥浥敢摤摥椠桴⁥楰敬挠灡攠捴‮污潣灭敬整‬ਠ湩汣摵湩⁧敲潭慶景攠捸癡瑡摥攠牡桴眠瑩⁨污楬瑦⁳湡⁤敬摡⁳䰨湥瑧⁨景瀠汩⁥潦⁲慰浹湥⁴桳污敢洠慥畳敲⁤灵潴戠瑯潴景瀠汩⁥慣⥰خ〲㈮ㄮ㌀〰洠楤⁡楰敬ճ⸲⸸ㄱ
慅瑲睨牯湩攠捸癡瑡潩湩映畯摮瑡潩牴湥档獥漠⁲牤楡獮⠠潮⁴硥散摥湩⁧⸱洵椠楷瑤⁨牯〱猠浱漠汰湡 湩汣摵湩⁧牤獥楳杮漠⁦楳敤⁳湡⁤慲浭湩⁧景戠瑯潴獭‬楬瑦甠瑰⸱洵‬湩汣摵湩杧瑥楴杮漠瑵琠敨攠捸癡瑡摥猠楯湡⁤楤灳獯污漠⁦畳灲畬⁳硥慣慶整⁤潳汩愠⁳楤敲瑣摥‬楷桴湩愠氠慥⁤景㔠洰‮䄠汬欠湩獤漠⁦潳汩ࠀ楆汬湩⁧癡楡慬汢⁥硥慣慶整⁤慥瑲⁨攨捸畬楤杮爠捯⥫椠牴湥档獥‬汰湩桴‬楳敤⁳景映畯摮瑡潩獮攠捴‮湩氠祡牥⁳潮⁴硥散摥湩⁧〲浣椠敤瑰㩨挠湯潳楬慤楴杮攠捡⁨敤潰楳整⁤慬敹⁲祢爠浡業杮愠摮眠瑡牥湩Ⱨ氠慥⁤灵琠〵洠愠摮氠晩⁴灵潴ㄠ㔮洠㔮਀㘀ഀ縀畓灰祬湩⁧湡⁤楦汬湩⁧湩瀠楬瑮⁨楷桴氠捯污猠湡⁤湵敤⁲汦潯獲椠据畬楤杮‬慷整楲杮‬慲浭湩

consolidating and dressing complete.5.1.1ÿProviding and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work upto plinth level. 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregae 20 mm nominal size)5.33BTAdd or deduct for providing richer or leaner mixes respectevely at all floor levels.5.33B.48Providing M-15 grade R.C.C. instead of M-20 grade R.C.C.
Reinforced cement concrete work in wall (any thickness)including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts, etc. upto floor five level excluding the cost of centering,shuttering,finishing and reinforcement.5.2.1E1:1:2(1cement:1coarse sand:2 graded stone aggregate 20mm nominal size5.9.19Foundation,footing,Bases of column etc for mass concrete.5.9.61Columns,Pillars,Piers,Abutments,Posts and struts.¹Providing desination 100 A one brick flat soling joints filled with local sand including cost of watering texes, roualty all complete as per building specification and direction of E/l.20mm cement plaster of mix:13.13.41:6 (1 cement : 6 coarse sand) Waterproofing of Landscape Area on Podium using Polyurea WH 200, 120 GSM Geo Fabric membrane. The Mother concrete surface shall be cleaned thoroughly by removing the debris and mortar droppings, loose particles and any other foreign materials which may affect the adhesion, the further treatments with the mother surface. All surface cracks shall be filled with cement moratr 1:4 CM enriched with polymer modified compound (Nitobond SBR latex ) by cutting V grooves of 6mmX6mm and filling with the cement mortar. Coving at all the junctions shall be done for a size of 50mm X 50mm with polymer modified mortar prepared by mixing 50 kg cement + 150kg Sand + 4Litre of Nitobond SBR Latex + Water required for mortar consistency. After which Bore Packing shall be done To ensure better bond using Nitobond SBR Latex as bonding agent over pipe and Internal side of concrete followed by providing and applying high strength non shrink grout Conbextra GP2 for the gap around pipes for a thickness up to 50mm before treating the surface with Waterproofing layer. Construction Joint Treatment shall be done to Identify cracks, crevices and honeycomb areas on slab surface at floor slab, construction joints then chasing them open in the form of  V groove and fixing PVC nozzles of 18 mm dia. and Filling the  V  groove with Renderoc CS And grouting the same in cement slurry admixed with Cebex 100, expandable grout additive @ 225gms per bag of cement of 50 kg., to full saturation. After That Polyurea WH 200, shall be spray applied resulting in 100% solids, flexible, two-component, rapid curing hybrid Polyurea coating system providing high corrosion resistance, abrasion and waterproofing resistance at 1.5mm thickness applied over a priming coat of Nitoprime 31 at a coverage rate of 250ml/Sqm all complete.Membrane to be extended over the coving upto 300mm over the vertical wall & tucked in to a grove of 6mm X 6mm in Land scaping area above Parking basement floor . 120 GSM Geo fabric membrane shall be laid over Polyurea membrane as protection & de-bonding layer and finished with M20 grade screed concrete admixed with Complast WL at the dosage of 125 ml/ bag of cement to a minimum thickness of 50 mm as per site requirement to provide required slope all complete as per companys specification and direction of E/I. d æ
 % S Approved rate B.C.DM.RÆDismantling of Existing Heat resistant tiles and Reinstallation of the same after water proofing works including replacement of damaged tiles as per specification and direction of Engineer Incharge.rSupplying, fitting & fixing of following Furnitures including taxes and royality Make - Godrej/Durian/Usha Lexus TOTAL FOR FURNITURE WORKS =î
DETAILED ESTIMATE FOR THE PROPOSED RENOVATION AND UPGRADATION WORK OF BSFC OFFICE AT BSFC BUILDING, FRAZER ROAD, PATNA( 8TH FLOOR ). CRenovation for BSFC Office 8th floor at BSFC Building, Frazer Road. ARCHIPLUS"ESTIMATE SHEET (Measurement Sheet)L-210,DUMRAON PLACESl. No.No.
Lsqm.$Vitrified Tile flooring 800 x 800 mmToiletSkirtingCladding over columnsCeramic glazed tiles in wall./Gents Toilet long wall5 short wall1Toilet long wall/ W.C long wall%Rectified glazed Ceramic floor tiles.m. M.S Grill Synthetic enamel paint 2.4 timesWooden frames in chaukhatD3D4cum.Non Decorative flush door1 mm Lamination over doorsD1Lobby1Window WKPART-1 :Renovation for BSFC Office 8th floor at BSFC Building, Frazer Road.K Title: Renovation of 8th floor BSFC, Patna Sheet No. & & & Total Sheet #11A Wall Toilet-Ladies Toilet long wall1 P.H.C long wallGents & Ladies Toilet1BMeeting room floorskirting1Pantry long wallEighth floor hallLobby+stair+lift Granite works Lift wall Window sill WWindow sill W1,2 Levelling Edge moulding(Mineral Fibre False ceiling 600 x 600 mm Office 8-10System Aluminium Windows††††††††††††††††††††††††††圠ⰱല潒汬牥䈠楬摮ɳ㉄䘀物⁥慒整⁤瑓敥潤牯映慲敭ਮ⹍畂汩楤杮.㔀‰浭琠楨正朠慬敺⁤楦敲爠獥獩慴瑮搠潯⁲桳瑵整♲汇穡湩⁧湩映物⁥敲楳瑳湡⁴潤牯猠畨瑴牥 倀湡捩戠牡 䘀⁄ㄨ丠协〈潔杵敨敮⁤汇獡⁳湩倠牡楴楴湯 潄牯ੳ晏楦散ㄠ㐭ô匀灵汰楹杮映硩湩⁧湡⁤楦瑴湩⁧楨桧猠捥牵瑩⁹潣湲牥氠捯潦⁲慰捴⁨楦瑴湩⡧䉑䱐ㄭ洠歡⥥†牢獵敨⁤瑳敥楦楮桳洠摡⁥景朠慲敤⁤污浵湩畩污潬⁹慣瑳栠畯楳杮猠楬湡⁤潣灭捡⁴楳敺氠杩瑨椠敷杩瑨愠汬挠浯汰瑥⁥獡瀠牥猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅ᙉ†䄨灰潲敶⁤慒整䈠䌮䐮&䐀畯汢⁥歳湩氠浡湩瑡摥倠牡楴楴湯 潄牯ㅳ敍瑥湩⁧潲浯††††††††††††††潬杮眠污㉬敍瑥湩⁧潲浯††††††††††††††桳牯⁴慷汬/䄀瑮⁥潲浯††††††††††††††桳牯⁴慷汬8伀晦捩⁥ⴵ‷慨晬栠⹴††††††††††††††潬杮眠污㥬晏楦散㔠㜭栠污⁦瑨‮†††††††††††††猠潨瑲眠污㉬晏楦散ㄠ㐭†††††††††††††††氠湯⁧慷汬3伀晦捩⁥ⴱ‴†††††††††††††††桳牯⁴慷汬3伀晦捩⁥ⴸ〱†††††††††††††††氠湯⁧慷汬3伀晦捩⁥ⴸ〱†††††††††††††††桳牯⁴慷汬Ʊ倀潲楶楤杮愠摮映硩湩⁧景ㄠ〮浭氠浡湩瑡摥䜨敲湥慬⽭敃瑮牵⽹敍楲潮 慰敮汬湩⁧灵潴猠数楣楦摥栠楥桧⁴癯牥†㈱洠桴捩偗⁃潢牡⁤景䄠獬潴敮⼠䜠敲湥汰⽹䌠湥畴祲洠歡⁥楦瑴摥愠摮映硩摥漠敶⁲汁浵湩畩牦浡⁥景㈠‵⁸㔲浭瀠獯獴愠⁴〳挠散瑮敲⁳湡⁤㈠‵⁸㔲浭栠牯穩湯慴敭扭牥⁳瑡愠灰潲⁸〳挠散瑮牥⁳湩汣摵湩⁧潣瑳漠⁦湡档牯湩⁧桴⁥慰敮汬湩⁧潴眠污獬瀠潲数汲⁹椠据畬楤杮琠牥業整琠敲瑡敭瑮愠⁳数⁲牤睡湩⁧灳捥晩捩瑡潩湡⁤楤敲瑣潩景䔠䤯‮ 慌業慮整⁤慐湮汥楬杮5䴀䐮††††††††††††††††††††氠湯⁧慷汬5䴀䐮††††††††††††††††††††桳牯⁴慷汬 ㈀〮琠浩獥圀瑡牥牰潯楦杮椠潴汩瑥8吀楯敬⁴††††††††††††††††††††潬杮眠污㡬††∠††††††††††††††††††††桳牯⁴慷汬倀湡牴㡹慐瑮祲††††††††††††††††††††氠湯⁧慷汬圀瑡牥牰潯楦杮椠潲景爀潯ᅦ片摩䈠䔭䄠楸⁳ⴱش㈱㘮報ý倀潲楶楤杮愠摮映硩湩⁧桴牥慭湩畳慬楴湯眠瑩⁨敒楳潂摮摥爠捯潷汯挠湯潦浲湩⁧潴䤠㩓㠠㠱″慨楶杮搠湥楳祴㐠‸杫洯ⰳ㔠‰浭琠楨正‬牷灡数⁤湩㈠〰⁇楖杲湩倠汯瑹敨敮䈠条⁳汰捡摥漠敶⁲硥獩楴杮映污敳挠楥楬杮愠摮栠汥⁤湩瀠獯瑩潩祢挠楲獳挠潲獳湩⁧䥇眠物⁥瑥⹣匀䉕吭呏䱁䘠剏䌠噉䱉‫䡐⁅佗䭒ᴽ佔䅔⁌但⁒低⁎䍓䕈啄䕌䤠䕔卍ᨽ佔䅔⁌但⁒匠䡃䑅䱕⁅呉䵅㵓%䄀䑄䘠剏ㄠ┸䜠呓䤠偍䕌䕍呎䥁乏㔨㌮┶㴩吀呏䱁䘠剏䌠噉䱉‫䡐⁅佗䭒᤽潃瑳漠⁦楃楶‫䡐⁅潗歲ॳ删久噏呁佉⁎乁⁄偕則䑁呁佉⁎佗䭒传⁆卂䍆传䙆䍉⁅䄠⁔卂䍆䈠䥕䑌义ⱇ††††††††††††††††††††䘠䅒䕚⁒佒䑁‬䅐乔⡁㠠䡔䘠佌剏⤠‮††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††敇敮慲扁瑳慲瑣漠⁦潃瑳††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††⤠䅐呒‭′›佃华剔䍕䥔乏传⁆佂乕䅄奒圠䱁⹌ᤠ慅瑲⁨潷歲椠硥慣慶楴湯ܮ㍆䜠瑡ᙥ慅瑲⁨潷歲椠楦汬湩⹧#匀湡⁤楦汬湩⁧湵敤⁲潦湵慤楴湯戠獡⹥ 倀䌮䌮戠獡⹥ሠ⹒⹃⁃潦湵慤楴湯⸠$匀湡⁤楆汬湩⁧湩瀠楬瑮⁨…潦湵慤楴湯ሮ湵敤⁲汰湩桴戠慥$㄀〰䄭戠楲正眠牯湩猠灵牥猠牴捵畴敲മ潂湵慤祲眠污ᑬ⹐⹃⁃湩映畯摮瑡潩⹮刀䌮䌮椠潦湵慤楴湯ီ⹒⹃⁃潃畬湭䌠⸲刀䌮䌮䌠汯浵ㅃᬮ⹒⹃⁃慢摮愠⁴汰湩桴氠癥汥മ汐湩桴戠慥ဠ⹒⹃⁃扡癯⁥⹇⹌刀䌮䌮戠湡⁤瑡氠湩整敬敶⹬䌀湥整楲杮☠猠畨瑴牥湩⁧潷歲 䤀潆湵慤楴湯 倀楬瑮⁨敢浡 䰀湩整慢摮挀汯浵౮敂潬⁷汰湩桴 䄀潢敶瀠楬瑮᭨洸楄⁡敒湩潦捲浥湥⁴㈨┰℩⹒⹃⁃湩映畯摮瑡潩…汐湩桴戠慥ͭ⹋ᥧ⹒⹃⁃湩猠灵牥猠牴捵畴敲ᰮ〱浭䐠慩删楥普牯散敭瑮⠠〶⤥㄀洲楄⁡敒湩潦捲浥湥⁴㈨┰ 瑓敥片汩污湯⁧潢湵慤祲眠污⹬ 匀整汥朠瑡፥牂捩汦瑡猠汯楬杮ᜮ祓瑮敨楴⁣湥浡汥瀠楡瑮ᘠ敔瑸牵⁥硅整楲牯瀠楡瑮 ㌀〰洠楐敬ɳㅐ
洀吀敩戠慥ቭ楌瑮敬戠湡⁤‱楳敤䰀湩汴⁥慢摮㌠猠摩ཥ楐敬映畯摮瑡潩፮潂湵慤祲眠污牦湯๴湅整慲据⁥慧整㈀‰浭琠楨正挠浥湥⁴汰獡整楲杮മ䘠潲瑮圠污⹬ठ⸲′楴敭ታ桗瑩⁥散敭瑮瀠瑵祴 䴀敥楴杮删潯푭ࠄ畓灰祬湩⁧楦瑴湩⁧…楆楸杮漠⁦敍瑥湩⁧慔汢⁥潍敤坄⽓〶〰䌯䙎ⴠ吠扡敬匠穩⁥〶〰ㅸ〵砰㔷洰⹭䴠敥楴杮吠扡敬ⴠ吠扡敬匠穩⁥㨠㘠〰䰰砠ㄠ〵地砠㜠〵瑈‮㔲浭琠歨‮牐汥浡倠牡楴汣⁥潢牡⁤慴汢瑥灯眠瑩⁨噐⁃摥敧戠湡楤杮‮牐癯獩潩景〠‱潎‮景㘠䴠摯汵⁥汆灩潴⁰潃敶⁲眨瑩潨瑵猠楷捴⁨湡⁤潳正瑥 潦⁲楷敲洠湡条浥湥⹴倠敨潮潢摮甠楳杮椠牐ⵥ慌業慮整⁤慐瑲捩敬䈠慯摲☠䔠杤⁥慢摮琠楨正敮獳眠汩敢猠慴瑲映潲洲潦⁲潔⁰…洱潦⁲敲瑳瀠牡獴‮畏⁲䱐䉐挠牥楴楦摥映潲卉⁉牧摡⁥…敔浲瑩ⱥ䈠牯牥☠䘠湵畧⁳敲楳瑳湡散氠浡湩瑡摥漠瑵楳敤椠敳敬瑣摥挠汯牯☠椠獮摩⁥丨湯嘠獩扩敬倠牡⥴眠汩敢戠污湡楣杮眠楨整‮〱┰䔠牵灯慥敤楳湧☠琠硥畴敲☠ㄠ〰‥牐摯捵⁴潃獮獩整据ⱹ映摡⁥敲楳瑳湡散氠浡湩瑡潩敢瑳䤠瑮牥慮楴湯污吠捥湨汯杯⹹吠敨䴠瑡牥慩獬伯杲湡穩瑡潩桳污敢挠牥楴楦摥†卉ⵏ〹㄰‬卉ⵏ㐱〰ⰱ䤠体㔭〰㄰‬卉ⵏ㔴〰ⰱ愠汬䤠体䌠牥楴楦慣整⁳桳畯摬戠⁥獉畳摥映潲䅎䍂⁂捁散敬慲整⁤杁湥祣‬䥂䵆⁁䕌䕖⁌ⰱ䈠䙉䅍䴠浥敢獲楨⁰湡⁤䥂䵆⁁潃灭楬湡⁴牰摯捵⁴慢敳Ⱐ䤠摮慩敄楳湧䴠牡散瑲晩敩Ɽ吠慲敤䴠牡敃瑲晩敩Ɽ䜠䕒久䜠䅕䑒戠⁹䱕䜬䕒久倠佒‬䕓䅆‬‬䥁呏ⱁ䘠䍓猠潨汵⁤敢䤠獳敵⁤牦浯匠千䜠潬慢敓癲捩獥唠䅓Ⱐ倠䙅ⱃ䜠䥒䅈☠䤠䉇⹃湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ ? ٽЈ匀灵汰楹杮‬楦瑴湩⁧…楦楸杮漠⁦楈桧䈠捡桃楡⁲潍敤䱅久剔⽁䉈ⴠ䤠求捡潃潬牵匠穩⁥ⴺ⠠⥗㔶䴰⁘䐨㘩〵浍堠⠠⥈㈱〶浍匮慥楴杮䠠楥桧⁴㌵䴰⹭䴠獡整晲汵祬吠楡潬敲⁤湉䈠瑵整祲匭景⁴敌瑡敨敲瑴⁥潔䄠捣湥畴瑡⁥瑉⁳畃癲獥‬桔⁥桃楡⁲潃汬捥楴湯䘠慥畴敲⁳敒楦敮⁤楓桬畯瑥整⁳桔瑡䄠摤䌠浯潦瑲吠潍敤湲圠牯獫慰散⹳䘠慥畴楲杮㌠⁄牁牭獥獴吠楡潬敲⁤潔夠畯⁲潃晭牯ⱴ䤠⁴敌獴夠畯䴠瑡档夠畯⁲敄歳䠠楥桧⹴䄠晦硩摥圠瑩⁨牐浥畩慃瑳牥⁳潆⁲汆極⁤潍敶敭瑮䄠牣獯⁳湁⁹畓晲捡ⱥ吠楨⁳楈桧䈭捡畍瑬晩湵瑣潩慮桃楡⁲䈠敲瑡慨汢⁥敌瑡敨敲瑴⁥灕潨獬整祲䘠敥獬匠景⁴湁⁤敋灥⁳潙⁵潃汯牥䘠牯䰠湯敧⹲䄠橤獵慴汢⁥䐳䄠浲敲瑳⁳敌⁴潙⁵慍捴⁨潙牵䐠獥效杩瑨‮摁番瑳扡敬䠠慥牤獥⁴湅扡敬吠摁灡⁴潙牵匠慥楴杮倠獯畴敲䈠獡摥传桔⁥慔歳‮敇敮潲獵祬倠摡敤⁤敓瑡䄠摮䠠杩⁨慂正敲瑳传晦牥⁳潃晭牯慴汢⁥敓瑡湩⁧硅数楲湥散‮慐摤摥䄠浲敲瑳⁳畆瑲敨⁲汅癥瑡獥䌠浯潦瑲‮湐略慭楴⁣效杩瑨䄠橤獵浴湥⁴敌獴夠畯䴠瑡档吠敨䐠獥效杩瑨‮楔瑬吠湥楳湯䌠湯牴汯䰠瑥⁳潙⁵湉牣慥敳传⁲敄牣慥敳吠敨删獥獩慴据⁥桗汩⁥潙⁵敒汣湩⹥匠湹档潲楮敳⁤敍档湡獩楗桴㐠删捥楬楮杮倠獯瑩潩晏敦獲倠牥潳慮楬敳⁤潃晭牯⹴ㄠ㘳䬠⁧潌摡䈭慥楲杮䌠灡捡瑩⁹湅畳敲⁳瑓扡汩瑩⁹湁⁤敓畣楲祴䘠牯吠敨唠敳⹲倠敲業浵丠汹湯䈠獡⁥湅畳敲⁳潌杮癥瑩⹹䠠杩⵨畑污瑩⁹慃瑳牯⁳湅畳敲匠潭瑯⁨潎獩ⵥ牆敥䴠癯浥湥⹴吠敨匠汥敬⁲ 潃灭湡⁹桓畯摬䈠⁥慎换⁢敃瑲晩敩⁤獉ⵯ〹㄰㈺㄰ⰵ䤠潳ㄭ〴㄰㈺㄰ⰵ传獨獡ㄭ〸㄰㈺〰ⰷ䤠潳㐭〵㄰㈺㄰ⰸ䤠潳㔭〰㄰㈺㄰‸湁⁤獉ⵯ㌱㠴⸵传桴牥䌠牥楴楦慣楴湯⁳汕䜭敲湥畧牡⁤潇摬⠠楗桴䴠牯⁥桔湡ㄠ〰倠潲畤瑣⁳灁牰癯摥䤠据畬楤杮匠牵慦散䴠瑡牥慩⥬‬片桩⁡ⵖ〲㤱Ⱜ䜠敲湥牰Ɐ䤠摮慩敄楳湧䴠牡Ⱬ䘠捳‬敐捦⸮湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ . / A ͅȈ匀灵汰楹杮映瑩楴杮☠䘠硩湩⁧景䴠摥畩慂正䌠慨物䴠摯汥䄠䥒呓⽏䉍ⴠ䌠慨物匠穩⁥⠠⥗㘶洰⁘䐨㘩〹浭堠⠠⥈ㄱ〳浭‮慍整楲污☠匠扵祴数䘠扡楲⁣‭敍桳‮畆据楴湯䄠橤獵慴汢⁥界扭牡匠灵潰瑲‬敒潶癬湩Ⱨ䄠橤獵慴汢⁥牁牭獥ⱴ倠敮浵瑡捩䠠楥桧⁴楌瑦‮敍档湡獩敓晬圠楥桧⁴畍瑬汩捯楫杮䴠捥慨楮浳‮灕潨獬整祲䴠瑡牥慩慆牢捩‬慆牢捩ⴠ䴠獥⹨匠慥⁴慍整楲污䘠扡楲⹣䘠湩獩⁨慍瑴⹥䌠汯畯⁲…潃潬牵䘠浡汩⁹片祥ⴠ䰠杩瑨‮桔⁥敓汬牥⼠䌠浯慰祮匠潨汵⁤敂丠扡扣䌠牥楴楦摥䤠潳㤭〰㨱〲㔱‬獉ⵯ㐱〰㨱〲㔱‬桏慳⵳㠱〰㨱〲㜰‬獉ⵯ㔴〰㨱〲㠱‬獉ⵯ〵〰㨱〲㠱䄠摮䤠潳ㄭ㐳㔸‮瑏敨⁲敃瑲晩捩瑡潩獮唠⵬片敥杮慵摲䜠汯⁤在瑩⁨潍敲吠慨〱‰牐摯捵獴䄠灰潲敶⁤湉汣摵湩⁧畓晲捡⁥慍整楲污Ⱙ䜠楲慨嘠㈭㄰ⰹ‬片敥灮潲‬湉楤湡䐠獥杩慍歲‬獆Ᵽ倠晥⹣湩汣獵癩⁥景愠汬琠硡獥愠摮爠祯污祴愠汬挠浯汰瑥⁥獡瀠牥挠浯慰祮猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦⽅⹉䴠歡⁥‭潇牤橥 畄楲湡 敆瑡敨汲瑩⹥ ? 䴀䐮䌠慨扭牥‬湁整愠摮倠䄮删潯፭潆⁲景楦散〠‱潴ㄠᴰ潆⁲潃灭捡潴⁲湡⁤敒潣摲爠潯㭭楓杮敬䘠捡摥䴠扯汩ⵥㄠ〸洰⁗⁸㈴洵⁸ㄲ〰浭䠨⥴‭㄰丠獯㤮楓杮敬䘠捡摥䘠硩ⴠ㠱〰浭圠砠㐠㔲浭砠㈠〱洰⡭瑈⴩〠‶潎⹳錠ࠇ畓灰祬湩⁧楦瑴湩⁧…楆楸杮漠⁦传晦捩⁥慔汢⁥潍敤䩍⽆ㄶ〱⼱⁁楷桴猠摩⁥湵瑩删瑥牵⵮吠扡敬匠穩⁥䰨㈭〸砰ⵄ〱㔲䡸㜭〷洩…楓敤删湵敮⁲楓敺⠠ⵌㄱ〰䑸㔭〰䡸㜭〷洩⹭吠扡敬眠瑩⁨湩整捲慨杮扡敬猠摩⁥湵瑩爠瑥牵f ize 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. + ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. G ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. F áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. 3 4 F ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. E Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. $ % A Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. ? Supplying fitting & Fixing of Table with side unit return Model DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be sta

from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. I Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A - Chair Size (W)590mmX (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat.This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA,FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. B JSupplying fitting & Fixing of High Back Chair with revolving Model RICH/ 37815/HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. - . Q ßSupplying fitting & Fixing of Office Table with Side Unit Model DWS/34756 - Table Size-(L)2000mm X (D)1800mm X (H)755mm No Of Drawers3 No Of Shelves 5 Add Ons Interchangeable Side Runner Finish Matte Size Large Style Contemporary-is a suave . Table top thk 40mm Made with a combination of engineered wood, this gorgeous desk has contrasting panels in black for a contemporary look. Coupled with a runner and storage for your files and cabinets, the Clint is a desk meant for the discerning tycoon. With a warm walnut finish, the dual tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. J Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A- Chair Size (W)590mm X (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat. This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. + , A NSupplying fitting & Fixing of High Back Chair with revolving Model RICH / 37815 / HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. = > C D U Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. 1 2 ; xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. , - A Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. ( 2Double Faced Mobile- 1800mm W x 850mm x 2100mm HtjCompactor Optimizer of 2080mm overall height as per detail given below. Technical Specification *Verticals: - In 0.8 mm Thickness CRCA sheet & shall be in 8-fold Box Type design in full panel form.* Shelves: - In 0.8mm Thickness in 10 fold design to take a load of 60 kgs UDL.*Center Partition : In 0.8 mm Thickness, shall be in full sheet in 2 parts & each shall have 2 nos. ribs for strength & rigidity, this shall be used as center partition for DFM.*The Backs of the Single Fixed unit shall be closed by Box Type Covers.*Base Frame: - Shall be fabricated from formed channels of size 40 x 100 x 3mm thick made from HR steel & internal supports in 2mm HR. Base Frame will be made out of ISMC 75x40 for 2700mm long unit. base wheels fabricated from solid steel round with groove for self alignment to prevent derailment of the unit.Vertical Panel: Vertical Panel of size 450x2025 made of 1 mm CRC Sheet.Storage Level: Our unique 8 bend Shelves are made out of 1mm CRC Sheet for bearing maximum load.Clips: Boltless Electroplated Clips are used for resting of storage panels for easy fixing & easy adjustment of loading level.Central Lock: This single central lock is provided to lock the whole unit into single one.compartment to save you from searching numerous keys.Center Partition: These are made out of 0.8mm CRC Sheet to give maximum stability & strength to the whole unit.  ƒCUBICAL WORKSTATION (1500+1500X600X1200)- WORKSTATION Size (1500+1500X600X1200) ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop.· Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side. ·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray . .Metal CPU Trolley. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.  ÝSupplying fitting & Fixing of 2 Door Storage Cabinet Model PJ014739-Material Prelaminated particle board Colour-as per direcion E/I. Dimension (W)900mm X (D)400mm X (H)1200mm.Finish Matte.Size Standard. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C °Supplying fitting & Fixing of Medium Back Chair Model MMPL/70008/MB- Chair Size (W)580mm X (D)670mm X (H)1110mm. Its Classic All-Black Look With Soft Black Fabric Upholstery Makes It An Irresistible Chair. The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. C #Add for IDA Handling Charges @ 7 % 5.22.7C1
Thermo-Mechanically Treated barsTMTC-500-12mm dia(3 sidesT(Rupees Four Crores Ninety Two Lacs & Ninety Six Thousand & Two Hundred Fourty Only) Rs. 46071247.00ø
B.O.Q FOR THE PROPOSED RENOVATION AND UPGRADATION WORK OF BSFC OFFICE AT BSFC BUILDING, FRAZER ROAD, PATNA( 8TH FLOOR ). #Make- As per BCD approved make List
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G.I. box etc. as required.1.7.12"4x10 sq.mm + 1x6 sq. mm earth wirešSupplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ reeessed PVC conduit as required.1.15.22 X 1.5 sq. mm2.4.1100 A, 30 KA, FPMCCB2.4.963/100 A, 16 KA, TPMCCBISupply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.)40 A to 63 A, TP&N2.12.840 A to 63 A, SPNFProviding and fixing copper tape 20 mm X 3 mm thick (Bus Bar in Panel)2.33.22.33.1"6 way, Double door, l/C 160A, MCCB"4 way, Double door, l/C 160A, MCCB5.7.312 wattG
Supply and fixing surface recess/ surface mounted following types LED down lighter with minimum efficacy 100 lm/w in pressure die cast aluminium housing and integrated electronic driver etc. directly on ceiling including connection with 1.5 sqmm FR PVC insulated copper conductor cable and earthing the body etc. as required ‰
Supplying and fixing recess / surface mounted 36 watt LED flat panel 2 x 2 ft with minimum efficacy 100 lm/w which provides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc. directly on false ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.  9 / 10 watt LED Lamp 20 watt LED LampLaying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.7.4.2¼Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.150 mm sweep (1300/1400 RPM)8.18.18.18.2200 mm sweep (1300/1400 RPM)7.7.11600 A200 A,
Supplying and fixing 4' x 20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc. direcctly on wall/ceilling including connection with 1.5 sq. mm. FRLS PVC insulated copper conductor etc. as required. (For non-residential building)ËProviding and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.l. tube, having single prong at top, with 85 mm dia 6 mm thick G.l' base plate including holes etc. complete as required.‘Providing and fixing G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) DSR 25 11.13½ X 95 sq. mm (45mm)11.1.24ÇSupplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.95 sq. mm, 3.5 coreþS/F 'C' series, MCB: Supplying and fixing following rating, 240/415 volts, 'C' curve, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.‰
Supplying and fixing , following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder ainted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBS) BCD A.R 1016 HP BCD A.R 12
VRF/VRV indoor AC unit (ceiling mounted 4 way):- Supply installation testing and commissioning of 4 way round flow ceiling suspended/mounted cassette type unit comprising of copper evaporator, electronic expansion valve, blower, motor, filter pad, auto air swing louvers, temperature &on/off display with inbuilt drain pump & decorative panels including internal wiring, controls. Dimension in terms of length & width should not be more than 950mmX950mm with wireless remote controller. (Single phase/three phase)4.50 TR BCD A.R 11®
VRF/VRV indoor AC unit (wall mounted):- Supply installation testing and commissioning of wall mounted indoor split unit comprising of copper evaporator, electronic expansion valve, blower, motor, filter pad, auto air swing louvers, and temperature & on/off display with provision of discharge angle setting by wireless remote controller including internal wiring, controls complete as per specification. (Single phase/three phase)1.05 tr
`1.33 TR1.65 TR1.05 TR0.83 TR11.1.223½ X 50 sq. mm (35mm)50 sq. mm, 3.5 core7.7.9 BCD A.R 9Ô
Copper piping: - Supply, installation, testing and commissioning of interconnecting copper refrigerant pipe work (19mm/13mm thick) duly insulated with elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications. And exposed piping should be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as per specification Q31.8 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q28.6 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)O25 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q22.2 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)Q19.1 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q15.9 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q12.7 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)P9.7 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)P6.4 mm O.D. wall thickness more than or equal to 1.4mm (insulation -13 mm thick)Q34.9 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)O38 mm O.D. wall thickness more than or equal to 1.4mm (insulation -19 mm thick)mtr BCD A.R 16“Y joints:- Supply, installation, testing & commissioning of ref nut/Y-joints brass for indoor and outdoor units of suitable size as per requirement¿Providing and fixing of CPVC, 6Kg/cm2 drain water piping with fittings, support and insulated with 6 mm thick closed cell elastomeric nitrile rubber insulation complete as per specification . BCD A.R 732 mmDSR EnM 25 4.14.1.44.1.2-450 mm width X 50 mm depth X 2.0 mm thickness4.1.6dProviding and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing etc. as required.Z
Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.MP SOR 2024 43.143.1.3 + GST @ 18%ªEPABX system consists of 64 nos. extensions (4 digital 60 analog) , 16 nos of junction & upto 128 nos. of expandable eport, with one operating console, 3 Amp max. current43.3.5 + GST @ 18%’Supplying, fixing essential additional accessories to EPABX system of approved make with all necessary material as required as per specifications.MP SOR 2024 43.343.3.10 + GST @ 18%W
Supply, installation, testing and commissioning of EPABX system consist, no. of extension, no of junction, no. of expandable eport, operating console, current on max. load with ISDN compatible of approved make and labor as required as per specifications. (Make- Matrix. Alcatel, Syntel, Honeywell or approved equivalent as per approval of EIC)¥EPABX system digital phone with 2 line display (32 characters) with 8 programmable keys. (Make- Matrix, Alcatel, Beetel or approved equivlent as per approval of EIC)e4 push button CLI phone. (Make- Matrix, Alcatel, Beetel or approved equivlent as per approval of EIC)5
Supply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, armoured polythene jacketed telephone cables as per DOT specifications of following sizesMP SOR 2024 38.310 Pair38.3.1 + GST @ 18%MP SOR 2024 38.4ƒSupply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below :-38.4.1 + GST @ 18%38.4.4 + GST @ 18%50 Pair62 MP IP IR eyeball camera with H.264 video compressionMP SOR 2024 54.1Supply, Installation testing and commissioning of the IP dome camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR). UL listed54.1.1 + GST @ 18%52 MP IP IR bullet camera with H.264 Video compressionMP SOR 2024 54.254.2.1 + GST @ 18%xSupply, Installation testing and commissioning of the IP bullet camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 3.6 mm fixed lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR) Hard diskMP SOR 2024 54.30#Providing &fixing of 2 TB hard disk54.30.1 + GST @ 18%ŠSupply, installation testing and commissioning of wall mounting rack, for computer switches/Patch Panel etc complete as mentioned below :-MP SOR 2024 38.1738.17.2 + GST @ 18%¤9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement1.58.11 run of cableMP SOR 2024 57.257.2.4 + GST @ 18%
55 öSupply, installation testing and commissioning of High-Speed HDMI corrosion-resistant connector & braided cable, Supports Ethernet, 3D, 4K video, computers and other HDMI-enabled devices Black as required to complete the job as mentioned below :-MP SOR 2024 38.145 Metre, HDMI cord38.14.3 + GST @ 18%38.14.5 + GST @ 18%20 Metre, HDMI cord LAN Network38.17.4 + GST @ 18%MP SOR 2024 38.20ê
24-Port Gigabit Unmanaged Desktop Switch. Full wire-speed data transmission. Energy-efficient design. 1000Base-T Interface : 24. Auto MDI/MDIX .Switching Capacity : 48 Gbps. Operation Temperature 0 ~ 40 °C. Power Input ACÿ100 ~ 240 V.38.20.4 + GST @ 18%38.20.3 + GST @ 18%MP SOR 2024 38.15 + GST @ 18%MP SOR 2024 38.9<RJ - 45 computer socket cat 6 with shutter modular (1Module)38.9.1 + GST @ 18%MP SOR 2024 38.13!CAT 6 RJ45 patch cord UTP 1 metre38.13.1 + GST @ 18%38.13.3 + GST @ 18%!CAT 6 RJ45 patch cord UTP 3 metreMP SOR 2024 47.2—
Supply, installation, testing and commissioning of UPS with isolation transformer & battery for backup, having three phase input with ground (R-Y-B-N-G), Voltage range 190v AC-478v AC (based on load %), line low transformer (0-50% :190v/51-100% : 305v ± 3% VAC), line low comeback +25 - 35 VAC ( ± 3%), line high transfer 478 VAC (± 3%), line high comeback 461 VAC (± 3%), frequency rang 46 - 54 Hz, power factor 0.99, Total harmonic dist Each 85.2 10

18.49 tion (current)-THDi (<5% with full load, having output

最攀 ㈀㈀ 嘀䄀䌀⼀㈀㌀ 嘀䄀䌀⼀㈀㐀 嘀䄀䌀Ⰰ 瘀漀氀琀愀最攀 爀攀最甀氀愀琀椀漀渀 넀 ㄀─Ⰰ 昀爀攀焀甀攀渀挀礀 㔀 䠀稀 넀 ⸀㄀ 䠀稀Ⰰ 匀礀渀挀栀爀漀渀椀稀愀琀椀漀渀 爀愀渀最攀 㐀㘀 ⴀ㔀㐀 䠀稀Ⰰ 瘀漀氀琀愀最 alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi Each 434.2 10

18.51 tone finish of the desk adds to its overall style and finish. With an option of regular drawers and shuttered glass storage units you can take a pick of which unit suits you the best.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.JSupplying fitting & Fixing of High Back Chair with revolving Model RICH/ 37815/HB Size(W)590mm X (D)505mm X (H)1280mm. Chrome plated base with gas height adjustment and central tilting with single locking machenaism. Armrest with padding. Leatherette uphlostery has the look and feel of top grain leather. Cushion wtih lumber support for all day comfort. Chrome plated loop armrest with padded upholstery for extra comfort. chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Look out tilt function when chair is in upright position. 5% post consumed recycled content & 30% total recycled content. Color-Black.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Visitor Chair Model MMPL/70011/CN/A - Chair Size (W)590mmX (D)490mm X (H)980mm. Its moulded seat and indented back provide exceptional all-day support. Premium virgin foam sits atop a 14mm thick boiling waterproof plywood forming the moulded seat.This is then encased in deep black fabric upholstery with defined line seams that provide comfortable seating while adding depth to the high backrest. The powder-coated metal cantilever base provides extraordinary support for easy seating. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA,FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return Model DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ƒCUBICAL WORKSTATION (1500+1500X600X1200)- WORKSTATION Size (1500+1500X600X1200) ·67mm thk Sliding Tile Based Partition. · Single Metal raceway cover at skirting level in Partition.· Pin up & white board in partition above the tabletop.· Table top made of 25mm thk Prelamin particle board with pvc edges. · Tabletop supported with 18mm thk side panel Prelaminated Particle Board with Pvc edge banding side. ·Pedestal of 400Lx 450Dx725 HT (2 drawer + 1filling). .PVC Keyboard Tray . .Metal CPU Trolley. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.°Supplying fitting & Fixing of Medium Back Chair Model MMPL/70008/MB- Chair Size (W)580mm X (D)670mm X (H)1110mm. Its Classic All-Black Look With Soft Black Fabric Upholstery Makes It An Irresistible Chair. The Deep-Cushioned Back And Seat Conform To The Natural Curvature Of The Spine For Optimum Ergonomics And Lumbar Support. The Synchro-Single Locking Mechanism Along With The Tilt Tension Control, Lets You Find Your Ergonomic Position With Ease. The Pneumatic Height Adjustment Along With The Sturdy Armrest Provide Further Comfort. A Strong Nylon Base Supports The Structure, While The 55Mm Castor Wheels And A 360-Degree Swivel Provide Swift Yet Stable Movement. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ÝSupplying fitting & Fixing of 2 Door Storage Cabinet Model PJ014739-Material Prelaminated particle board Colour-as per direcion E/I. Dimension (W)900mm X (D)400mm X (H)1200mm.Finish Matte.Size Standard. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.jCompactor Optimizer of 2080mm overall height as per detail given below. Technical Specification *Verticals: - In 0.8 mm Thickness CRCA sheet & shall be in 8-fold Box Type design in full panel form.* Shelves: - In 0.8mm Thickness in 10 fold design to take a load of 60 kgs UDL.*Center Partition : In 0.8 mm Thickness, shall be in full sheet in 2 parts & each shall have 2 nos. ribs for strength & rigidity, this shall be used as center partition for DFM.*The Backs of the Single Fixed unit shall be closed by Box Type Covers.*Base Frame: - Shall be fabricated from formed channels of size 40 x 100 x 3mm thick made from HR steel & internal supports in 2mm HR. Base Frame will be made out of ISMC 75x40 for 2700mm long unit. base wheels fabricated from solid steel round with groove for self alignment to prevent derailment of the unit.Vertical Panel: Vertical Panel of size 450x2025 made of 1 mm CRC Sheet.Storage Level: Ou

⁥畯⁴景ㄠ浭䌠䍒匠敨瑥映牯戠慥楲杮洠硡浩浵氠慯⹤汃灩㩳䈠汯汴獥⁳汅捥牴灯慬整⁤汃灩⁳牡⁥獵摥映牯爠獥楴杮漠⁦瑳牯条⁥慰敮獬映牯攠獡⁹楦楸杮☠攠獡⁹摡番瑳敭瑮漠⁦潬摡湩⁧敬敶⹬敃瑮慲潌正›桔獩猠湩汧⁥散瑮慲潬正椠⁳牰癯摩摥琠潬正琠敨眠潨敬甠楮⁴湩潴猠湩汧⁥湯⹥潣灭牡浴湥⁴潴猠癡⁥潹⁵牦浯猠慥捲楨杮渠浵牥畯⁳敫獹䌮湥整⁲慐瑲瑩潩㩮吠敨敳愠敲洠摡⁥畯⁴景〠㠮浭䌠䍒匠敨瑥琠楧敶洠硡浩浵猠慴楢楬祴☠猠牴湥瑧⁨潴琠敨眠潨敬甠楮⹴†☠
牐癯摩湩⁧湡⁤汰捡湩⁧湩瀠潲数⁲潰楳楴湯挠湯牴汯敬⁤数捲汯瑡湩⁧䌨⥐䠠獯⁥卉⁉慭歲摥⠠卉㠺㈴⤳㘠″浭搠慩砠ㄠ‵潬杮挠浯汰瑥⁥楷桴椠獮慴瑮湡潥獵琠灹⁥瑳楡汮獥⁳瑳敥㌶洠楤ⱡ䤠䥓洠牡敫⁤慭敬☠映浥污⁥潣灵楬杮⁳䤨㩓〹⤳戠畯摮愠摮爠癩瑥摥琠潨敳瀠灩⁥楷桴挠灯数⁲楲敶獴愠摮ㄠ㔮洠潣灰牥眠物⹥ǔ倀潲楶楤杮愠摮映硩湩⁧敷瑡敨⁲牰潯⁦潨敳挠扡湩瑥⁳潦⁲慹摲栠摹慲瑮映扡楲慣整⁤牦浯ㄠ‶⁧卍猠敨瑥眠瑩⁨畦汬朠慬獳搠潯⁲湡⁤潬正湩⁧牡慲杮浥湥ⱴ猠極慴汢⁥潴愠捣浯潭慤整漠敮栠摹慲瑮瘠污敶‬‴潮⹳㔱潬杮栠獯ⱥ㈠丠牢湡档瀠灩⁥湡⁤湯⁥楦敲慭❮⁳硡⹥吠敨挠扡湩瑥猠慨汬戠⁥慰湩整⁤楷桴漠敮挠慯⁴景瀠楲敭⁲湡⁤楦楮桳摥猠潴敶攠慮敭汬摥∠楆敲删摥Ⱒ∠楆敲䠠獯≥眠楲瑴湥漠牦湯⁴湩汣摵湩⁧畳瑩扡祬洠畯瑮摥漠⁡慲獩摥洠獡湯祲瀠慬晴牯獡爠煥極敲⹤⠠灁牰硯〠㜮洵砠〠㘮⁸⸰㔲⥭✮
畓灰祬‬湩瑳污慬楴湯‬整瑳湩⁧…潣浭獩楳湯湩⁧景朠湵洠瑥污㈠眠祡䘠物⁥牢杩摡⁥畳瑣潩潨敳挠畯汰湩⁧䐨慲⵷畯⁴潃湮捥楴湯 楷桴渠瑵映牯映浥污⁥潣灵楬杮愠⁳数⁲卉㤺㈰ㄭ㜹‴潣灭敬整眠瑩⁨㔱‰浭搠慩‮䥇猠捵楴湯瀠灩⁥湡⁤㔱‰浭搠慩‮‱潎‮䥃映潯⁴慶癬⁥汦湡敧⁤琨敢挠湯敮瑣摥琠瑳瑡捩眠瑡牥琠湡⥫砮
牐癯摩湩⁧湡⁤楦楸杮䴠⁓慣楢敮⁴琨湥汣獯⁥扡癯⁥牄睡漭瑵䘯物⁥牢杩摡⁥湩敬⁴潣湮捥楴湯⥳†慦牢捩瑡摥映潲㘱⁧桳敥⁴楷桴映汵牦湯⁴汧獡⁳潤牯愠摮氠捯楫杮愠牲湡敧敭瑮搠汵⁹慰湩整⁤楷桴漠敮挠慯⁴景瀠楲敭⁲湡⁤睴牯洠牯⁥潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤慭敫愠摮猠慨敤愠摮猠極慴汢⁹潭湵整⁤湯愠爠楡敳⁤慭潳牮⁹汰瑡潦浲愠⁳敲畱物摥⠠灁牰硯〮㜮‵⁸⸰‶⁸⸰㔴洠⸩LJ匀灵汰ⱹ椠獮慴汬瑡潩Ɱ琠獥楴杮☠挠浯業獳潩楮杮†景洠汩⁤瑳敥汢捡楰数⠠卉ㄺ㌲⼹卉㌺㤸⤵栠慥祶挠慬獳椠据畬楤杮挠瑵楴杮‬捳敲楷杮‬敷摬湩⁧瑥⹣挠浯汰瑥⁥楷桴映瑩楴杮瘠穩‮整獥攠扬睯‬敢摮ⱳ映慬杮獥‬敲畤散獲攠捴‮湩汣摵湩⁧牰癯摩湩⁧湡楴挭牯潲楳敶琠敲瑡敭瑮⠠潣瑡湩⁧湡⁤牷灡楰杮 楷桴㐠洠桴捩慴数愠摮栠汯摩祡琠獥⁴档捥獡瀠牥䤠㩓〱㈲‱潣灭敬整愠⁳敲畱物摥‮潎整㨠倠灩獥甠瑰湡⁤〵洠楤⁡桳污敢琠牨慥敤⁤潪湩獴‬扡癯⁥〵浭猠慨汬戠⁥敷摬摥樠楯瑮⹳®Ȉ倀潲楶楤杮愠摮映硩湩⁧牰獥畳敲朠畡敧⁳楷桴椠潳慬楴湯挠捯獫愠摮挠牨浯⁥汰瑡摥挠灯数⁲楰数⁳獡栠摹慲瑮猠慴楴湯琠敲摡瀠敲獳牵⁥牦浯〠㈭‵杫振㉭挠浯汰瑥⁥湡⁤景搠慩楤⁡㔱‰浭谮㼀贀܀글ࠀ牐癯摩湩⁧湡⁤楦楸杮瀠敲獳牵⁥慧杵獥眠瑩⁨獩汯瑡潩潣正⁳湡⁤档潲敭瀠慬整⁤潣灰牥瀠灩獥愠⁳票牤湡⁴瑳瑡潩潴爠慥⁤牰獥畳敲映潲ⴰ〲欠⽧浣′潣灭敬整愠摮漠⁦楤污搠慩ㄠ〵洠⹭Œ?/ 䌠剁䥒䝁⁅䙏䴠呁剅䅉⁌䥗䡔䰠䅏䥄䝎☠唠䱎䅏䥄䝎%䌀慯獲⁥慳摮⠠㠵欠敬摡映潲潫汩慷⥲䰀捯污匠湡⁤䰨慥⁤䬱㈫⹐☩瑓湯⁥桃灩⁳䰨慥⁤祢删楡牦浯䴠湡異⥲$刀慥⁤牂捩獫ㄠ〰⁁䰨捯污䰠慥⁤䬱㜫⥐†佔䅔⁌但⁒䥃䥖⁌佗䭒†䕓呃佉ⵎ䄠吀呏䱁䘠剏倠䕈圠剏⁋匠䍅䥔乏䈭)吀呏䱁䘠剏䘠剉ⵅ䥆䡇䥔䝎圠剏⁋匠䍅䥔乏䌭㴠L 畓⁢†潔慴䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃†䬽佔䅔⁌䥃䥖⁌䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃†⠽䑁⁄但⁒㠱‥升⁔䵉䱐䵅久䅔䥔乏⠠⸵㘳⤥‽k 畓⁢†潔慴䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥃⬠䔠䕌呃䥒䅃⁌佗䭒†䕓呃佉⁎䐨 㴠(吀呏䱁䘠剏䔠䕌呃䥒䅃⁌佗䭒†䕓呃佉⁎䐨 ਽吠瑯污†㴠匀䍅䥔乏‭⁄䥆䕒䘭䝉呈义⁇Z匀䉕吠呏䱁†䘠剏怠䌨噉䱉圠剏⁋䄨⬩倠䕈圠剏⁋䈨 ‫商乒呉剕⁅⁃†‫䥆䕒䘭䝉呈义⁇佗䭒⠠⥄†࠽㠱ㄮ⸷䄱R刁攀渀漀瘀愀琀椀漀渀 ☀ 唀瀀最爀愀搀愀琀椀漀渀 漀昀 䈀匀䘀䌀 䠀攀愀搀 漀昀昀椀挀攀 匀椀琀甀愀琀攀搀 愀琀 琀栀攀 㠀琀栀 䘀氀漀漀爀 ᔀ䜉 ᔀ㸉〉䴉⼉ 簀 ␀义剆十剔䍕啔䕒䐠噅䱅偏䕍呎䄠呕佈䥒奔#⠀⁁佇䕖乒䕍呎传⁆䥂䅈⁒乕䕄呒䭁义⥇儀何䥔䝎匠䕈呅䘠剏䈠䑉䕄卒ሠ慎敭漠⁦潃瑮慲瑣牯䄀摤敲獳漠⁦潃瑮慲瑣牯䔀洭楡䑉漠⁦潃瑮慲瑣牯圀慨獴灡⁰湅扡敬⁤䴊扯汩⁥畎扭牥匀潮ီ獅楴慭整⁤流畯瑮刀瑡⁥畑瑯摥戠⁹潃瑮慲瑣牯 ─䄠潢敶䈯汥睯#吀呏䱁儠何䕔⁄䵁問呎ਠ獒⠮湉䘠杩牵⥥"吀呏䱁儠何䕔⁄䵁問呎 獒⠮湉圠牯獤ᬩ潔慴捓敨畤敬䄠潭湵⁴刨⹳Ἡ潔慴潎⵮捓敨畤敬䄠潭湵⁴刨⹳ഩ潔戠⁥畑瑯摥ᄡ佔䅔⁌䵁問呎刊⹳ਠ慐瑲捩汵牡Q刁攀渀漀瘀愀琀椀漀渀 ☀ 唀瀀最爀愀搀愀琀椀漀渀 漀昀 䈀匀䘀䌀 䠀攀愀搀 漀昀昀椀挀攀 匀椀琀甀愀琀攀搀 愀琀 琀栀攀 㠀琀栀 䘀氀漀漀爀 ᔀ䜉 ᔀ㸉〉䴉⼉ 簀؀䥓丠⹯一呉ⴠ㈠⼳䕔⽎䑉⽁㘲í儀潵整⁤慒整䤠楆畧敲刨⹳ 琨敨焠潵整⁤慲整猠潨汵⁤敢椠据畬楳敶漠⁦污慔數⽳散獳‬潒慹瑬ⱹ匠楥湧牯条⁥敦ⱥ䌠牡楲条⁥景洠瑡牥慩獬‬牔湡灳牯瑡潩潣瑳漠⁦污慭整楲污⁳牦浯猠畯捲獥琠潷歲猠瑩ⱥ愠汬漠敶桲慥獤攠捴‮潣灭敬整椠污敲灳捥⥴ì儀潵整⁤慒整䤠潗摲⠠獒⤮⠠桴⁥畱瑯摥爠瑡⁥桳畯摬戠⁥湩汣獵癩⁥景愠汬吠硡獥振獥ⱳ删祯污祴‬敓杩潮慲敧映敥‬慃牲慩敧漠⁦慭整楲污ⱳ吠慲獮潰慲楴湯挠獯⁴景愠汬洠瑡牥慩獬映潲潳牵散⁳潴眠牯楳整‬污癯牥敨摡⁳瑥⹣挠浯汰瑥⁥湩愠汬爠獥数瑣畑瑯摥䄠潭湵⁴刨⹳ 琨敨焠潵整⁤慲整猠潨汵⁤敢椠据畬楳敶漠⁦污慔數⽳散獳‬潒慹瑬ⱹ匠楥湧牯条⁥敦ⱥ䌠牡楲条⁥景洠瑡牥慩獬‬牔湡灳牯瑡潩潣瑳漠⁦污慭整楲污⁳牦浯猠畯捲獥琠潷歲猠瑩ⱥ愠汬漠敶桲慥獤攠捴‮潣灭敬整椠污敲灳捥⥴ɓ䈀牯湩Ⱨ瀠潲楶楤杮愠摮椠獮慴汬湩⁧潢敲⁤慣瑳椭⵮楳畴爠楥普牯散⁤散敭瑮挠湯牣瑥⁥楰敬⁳景朠慲敤䴠㈭‵景猠数楣楦摥搠慩敭整⁲湡⁤敬杮桴戠汥睯琠敨瀠汩⁥慣⁰潴挠牡祲愠猠晡⁥潷歲湩⁧潬摡渠瑯氠獥⁳桴湡猠数楣楦摥‬硥汣摵湩⁧桴⁥潣瑳漠⁦瑳敥敲湩潦捲浥湥⁴畢⁴湩汣摵湩⁧桴⁥潣瑳漠⁦潢楲杮眬瑩⁨敢瑮湯瑩⁥潳畬楴湯愠摮琠浥潰慲祲挠獡湩⁧景愠灰潲牰慩整氠湥瑧⁨潦⁲敳瑴湩⁧畯⁴湡⁤敲潭慶景猠浡⁥愠摮琠敨氠湥瑧⁨景琠敨瀠汩⁥潴戠⁥浥敢摤摥椠桴⁥楰敬挠灡攠捴‮污潣灭敬整‬椠据畬楤杮爠浥癯污漠⁦硥慣慶整⁤慥瑲⁨楷桴愠汬氠晩獴愠摮氠慥獤⠠敌杮桴漠⁦楰敬映牯瀠祡敭瑮猠慨汬戠⁥敭獡牵摥甠瑰潢瑴浯漠⁦楰敬挠灡⸩Ê倀潲楶楤杮愠摮映硩湩⁧潦汬睯湩⁧慣慰楣祴戠獵慢⁲档浡敢⁲楷桴㐠猠牴灩⁳景猊極慴汢⁥楳敺洠摡⁥景挠灯数Ⱳ栠慥祶搠瑵ⱹ挠浯汰瑥⁥楷桴愠汬愠捣獥潳楲獥椠据畬楤杮挠湯敮瑣潩獮‬慥瑲楨杮琠敨戠摯⁹瑥⹣愠⁳敲畱物摥 alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi Each 708.4 10

alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi Each 594.8 10

alarm (main failure alarm, low battery alarm, UPS warning, overload, fault & bypass mode etc.), protections (advance electronic protection for device, safety backed with MCBs, fast acting fuses, high speed pulse blanking, electronic overvoltage/under voltage), connections (terminal block for input/bypass/battery & output), static bypass, communication interface RS 232/USB port for software interface, intelligent slot for SNMP (optional). UPS installation with all required material arrangements asrequired as per IS specification. '15 KVA (3 phase input & 1 phase output)$For 30 minute backup, min. 12000 VAH47.2.3.1 + GST @ 18%47.2.3?UPA (Vertic, APC or approved equivalent as per approval of EIC)ŒSPUT AC (inverter model, Cooling only) :- Supply, installation, testing and commissioning of Split type wall mounted air conditioning unit of following capacity including indoor, outdoor unit fitted with inverter based rotary compressor, copper condenser and first charge refrigerant R410A. The condensing unit working range should be capable for providing cooling between +/-5 deg. C to SO deg. C & heating within 'b deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr., insulation, cordless remote control, auto air swing louvers, connection copper lead wire, condensed water outlet pipe 2 mtr. complete etc as required. Outdoor/ indoor units should be of same make (brand). The cost includes contractor profit, labour cess, supply, transportation cost, installation, testing and commisioning cost. (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC1.5 TR, 5 star BCD A.R 1M
Supply, installation, testing & commissioning of L.E.D. Television (4K L.E.D. Display O.S. Webos /Android or equivalent, minimum 50 Hz refresh rate Min. 20 W speaker, Wifi/bluetooth enabled, minimum 2 HDMI & 1USB Port, i/c remote and wall/table top accessories) (Make- Samsung, LG, Sony or approved equivalent as per approval of EIC)ö15U cabinet with min. Dimension approx 615X600X500, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)õ9U cabinet with min. Dimension approx 488X600X600, wall mounting with 6 point 5 Amp. socket power supply strip, and fan, cable manager, tray as per Site requirement (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ySITC OF Gigabit Unmanaged Desktop Switch (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ÀSupply, installation testing and commissioning of 19" modular patch - 1 U patch panel 24, RJ 45 cat-6 connector (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)ºSupply, installation testing and commissioning RJ - 45 computer jack cat 6 with shutter modular (1Module) (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)£Supply, installation testing and commissioning of patch cord as mentioned below :- (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)¿Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required. (Make- D Link, Digisol, Cisco, HP or approved equivalent as per approval of EIC)_CCTV (Make- CP Plus, Honeywell, Panasonic, Bosch or approved equivalent as per approval of EIC)Fire Alarm SystemÙSupplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 25 28.1.1•Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 25 28.1.2 DSR 25 28.1.4ÄSupplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.öSupplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 25 28.1.7T
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. DSR 25 28.1.94 Zone28.1.9.1ÆSupplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. DSR 25 28.5.2
j
k~
1) Work will be executed by OEM approved vendor also supervision of OEM is mandatory 2) Contractor have to Prepare HVAC Heat and submit Piping Diagram and SLD 2) After completion of work agency have to get completion certificate from OEM of HVAC that all work is completed as per norms and design of OEM . (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EICóSupplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos.3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required.‘
Outdoor stand fabrication :- Supply, fabrication and erection of angle/channel/flat iron stand, hanging arrangement for air conditioning machines & ducts etc, back /support clamps or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of enamel paint as required as per specification. BCD A.R 28HVRV/VRF outdoor AC unit:- Supply installation loading unloading shifting on top floor, testing and commissioning of VRV /VRF /MRV outdoor units with following multiple inverter based scroll type compressors, electronic expansion valve, R 410A/ecofriendly green refrigerant, cooling & heating mode both options, special pre-coated fin type heat exchanger, low noise direct driven propeller condenser fans in each module with top discharge including internal wiring, microprocessor controls, safety. The condensing unit should be capable of providing cooling between +/- 5deg. C. to 48 deg. C & heating within O deg. C to 15 deg. C, COP not less than 3.3. complete as per specification. Outdoor/indoor units should be of same make (brand}. (Single phase/three phase} (Carrier, Daikin, Mitsubishi or approved equivalent as per approval of EIC
Supply, installation testing and commissioning of 32 channel NVR with 1080p real-time live view H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback max 320 MBPS incoming bandwidth support 4 SATA HDDs up to 32TB, supports fisheye video de-warping in local and web user interface, supports visual or auditory notifications(a flashing light, bell, or siren) complete with UL certification54.23.1 + GST @ 18%32 channel NVR with 4 SATAMP SOR 2024 54.23Schedule ItemsNon-Schedule Items Descriptions BCD SOR 2022 SECTION-A: CIVIL WORKMRMR N.S N.S B
N.b CùWiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc as required.1.59.3M.R Sl.No.?S.H. -II : SOIL, WASTE & RAIN WATER PIPE FITTINGS & ACCESSORIESDExtra depth for circular type manhole 0.91m internal dia (at bottom)# SECTION- D: AIRCONDITIONING WORK l
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.˜?™“
Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
™
Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket.
@
ÏProviding and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.u?vŸ? »?¼ÛProviding and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.Ù?Ú$Working pressure : 10.5 kg/cm2 "?#.Test Pressure : 16 kg/cm2 #?$Å
KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked.:-6 S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORKSECTION-A: CIVIL WORK SECTION-C: FURNITURE WORKÇProviding, fixing, testing and commissioning of CP brass swan neck wall mounted sink mixer with wall flange and swinging casted spout complete as required and making good the walls wherever required.®Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required.åProviding, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required.ÿProviding, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required.&
Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required.
Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required.1
Providing, Fixing grab bar fabricated from 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface 600 mm long grab bar in toilets for physically handicapped complete in all respects, including cutting and making good the wall wherever required. For Wash Basins & Water Closet.’
Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required.ÔSupplying fitting & Fixing of Meeting Table Model DWS/6000/CNF - Table Size 6000x1500x750mm. Meeting Table - Table Size : 6000L x 1500W x 750Ht. 25mm thk. Prelam Particle board tabletop with PVC edge banding. Provision of 01 No. of 6 Module Fliptop Cover (without switch and socket) for wire management. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.}Supplying, fitting & fixing of High Back Chair Model ELENTRA/HB - In Black Colour Size :- (W)650Mm X (D)650Mm X (H)1260Mm.Seating Height 530Mm. Masterfully Tailored In Buttery-Soft Leatherette To Accentuate Its Curves, The Chair Collection Features Refined Silhouettes That Add Comfort To Modern Workspaces. Featuring 3D Armrests Tailored To Your Comfort, It Lets You Match Your Desk Height. Affixed With Premium Casters For Fluid Movement Across Any Surface, This High-Back Multifunctional Chair Breathable Leatherette Upholstery Feels Soft And Keeps You Cooler For Longer. Adjustable 3D Armrests Let You Match Your Desk Height. Adjustable Headrest Enable To Adapt Your Seating Posture Based On The Task. Generously Padded Seat And High Backrest Offers Comfortable Seating Experience. Padded Armrests Further Elevates Comfort. Pneumatic Height Adjustment Lets You Match The Desk Height. Tilt Tension Control Lets You Increase Or Decrease The Resistance While You Recline. Synchronised Mechanism With 4 Reclining Position Offers Personalised Comfort. 136 Kg Load-Bearing Capacity Ensures Stability And Security For The User. Premium Nylon Base Ensures Longevity. High-Quality Castors Ensure Smooth Noise-Free Movement. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ESupplying fitting & Fixing of Medium Back Chair Model ARISTO/MB - Chair Size (W)660mm X (D)690mm X (H)1130mm. Material & Subtype Fabric - Mesh. Function Adjustable Lumbar Support, Revolving, Adjustable Armrest, Pneumatic Height Lift. Mechanism Self Weight Multilocking Mechanism. Upholstery Material Fabric, Fabric - Mesh. Seat Material Fabric. Finish Matte. Colour & Colour Family Grey - Light. The Seller / Company Should Be Nabcb Certified Iso-9001:2015, Iso-14001:2015, Ohsas-18001:2007, Iso-45001:2018, Iso-50001:2018 And Iso-13485. Other Certifications Ul-Greenguard Gold (With More Than 100 Products Approved Including Surface Material), Griha V-2019,, Greenpro, Indian Design Mark, Fsc, Pefc.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.“Supplying fitting & Fixing of Office Table Model MJF/61101/A with side unit Return- Table Size (L-2800xD-1025xH-770)mm & Side Runner Size (L-1100xD-500xH-770)mm. Table with interchangable side unit return size 2125mm. Table & side unit return made of medium density fibre board with veneer finish. Thikness of table top 100mm, Side panel & front modesty 90mm with pvc look. PVC writing pad on table top & 1 Interchangable mobile pedestal of 3 drawers with central lock. Side Runner top thikness in 90mm & thikness of side runner panel 70mm. 2 Wire manager in table & 1 wire manager in side runner & 1 shelves with keyboard tray. This precise Boss's Desk is designed with superb quality. We can find on the ample design, beautiful color, elements large space and modernized. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The frame of the table gives the great look with panel upholstered wth PVC material which gives the leatherette look. The office desk comes with the side runner having enough Supplying fitting & Fixing of storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhance the look.This piece will be an all-encompassing workspace in the office in your home for years to come. Color-Cherry. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of High Back Office chair -Model HALX/37199. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ïSupplying fitting & Fixing of Visitor Office chair Model RICH/37816/CN. A contemporary design with an all black finish, the chair is a staple in every office setting. A double padded cushion encased in an all black leatherette makes for one comfy seat. The side padding and the headrest sit snugly providing added lumbar support to the user. Available in multiple formats to suit your individual needs, take your pick from the options available with customisation offered on single and bulk purchase Material & Sub type Leatherette Colour Family Black Dimension (W)610mm X (D)505mm X (H)990mm Back Type Low Back Base Cantilever Frame Base Type Cantilever Maximum Seating Height19" Wheels Included No Finish Matte Style Contemporary. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.áSupplying fitting & Fixing of 2 Seater Leather Sofa Model RADIANCE/A/2- Sofa Size (W)1420mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 2-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint.The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.ßSupplying fitting & Fixing of 1 Seater Leather Sofa Model RADIANCE/1 - Sofa Size (W)920mm X (D)910mm X (H)920mm. Crafted for modern living, this compact 1-seater sofa features a sturdy solid wood frame made from steam beech wood, ensuring durability and long-lasting support. Upholstered in premium semi-aniline leather, the sofa offers a refined look with a soft, comfortable feel, while high-quality foam filling enhances seating comfort. The matte-finished solid wood legs complement the elegant light grey colour, creating a contemporary aesthetic suitable for modern interiors. seating height of 460 mm, the sofa is designed to provide comfortable seating for three people while maintaining a compact footprint. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table Model REAGAN/CT - Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC..inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Side Table Model REAGAN/ST - Solid wood Side Table Size (W)435mm X (D)435mm X (H)445mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite. Supplying fitting & Fixing of Back Unit- Back unit Size (2000x450x750)mm. Locable side runner with Openable shutter & shelf. made of 25mm thk pre lam particle board with edge banding. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm. The cabinet boast of 2 vertically stacked shelves to keep your files and documents safe and dust free. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.xSupplying fitting & Fixing of 2 Seater Sofa Model Blos/37930/B/2- 2 Seater Sofa Size(W)1450mm X (D)880mm X (H)950mm . Sofa with High Denstity Foam 40/50mm.Frame used is treated German Beech wood with termite free & borer free. Soft & comfortable cushion with high density and resilient foam. Frame used is Treated German Beed Wood & the wood used in sofa has been 8% moisture, this prevents the wood from wrapping and bending. all wood used is termite free and borer free. Foam of sofa comfortable cushion with high density and resilent foam. all apholstry materials used in specially designed. Color-Black/Brown. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Wooden Center Table REAGAN/CT- Solid wood Center Table Size (W)1195mm X (D)600mm X (H)465mm. Material & Subtype Engineered Wood - MDF, Veneer - Steam Beech Veneer. Table Top Material Veneer. Leg Material Solid Wood. Finish Semi-gloss. Colour & Colour Family Brown - Walnut. Table Top Thickness 34mm. commanding attention with its intricate details. Gracefully perching on solid wood saber legs, this versatile coffee table stores your coffee-time essentials in the stylish way ever. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC. inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.Supplying fitting & Fixing of Table with side unit return DWS/34752- Table Size(1500x750x750)mm & Side runner Size(750x400x750)mm. Table made of 25mm thk pre lam particle board with edge banding. Table top supported with side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. The Materials/Organization shall be certified ISO-9001, ISO-14001, ISO-50001, ISO-45001, all ISO Certificates should be Issued from NABCB Accelerated Agency, BIFMA LEVEL 1, BIFMA Membership and BIFMA Compliant product base , Indian Design Mark certified, Trade Mark Certified, GREEN GUARD by UL,GREEN PRO, SEFA, , AIOTA, FSC should be Issued from SCS Global Services USA , PEFC, GRIHA & IGBC.inclusive of all taxes and royalty all complete as per company's specification and direction of E/I. Make - Godrej/ Durian/ Featherlite.NSupplyi Each 500.4 20

17.34 Providing and fixing toilet paper holder :

17.34.1 C.P.brass Each 550.7 4

Rectangular type with openable circular lid

N.S Each 2819 1

N.S Providing, Fixing air freshner on wall face with necessary rawl plugs and steel screws complete in all respects, including cutting and making good the wall wherever required. Each 2365 2

N.S Providing, Fixing satin finish stainless steel AISI 316 grade wall mounted coat hooks on door with CP brass wall brackets and CP brass screws complete in all respects, including cutting and making good the wall wherever required. Each 450 2

N.S Providing, Fixing, testing and commissioning of adjustable type wash basin with elbow oprated tap for handicap toilet complete with brackets, tracks, waste pipes and other accessories complete including cutting and making good the walls wherever required. Each 14973 1

N.S Providing, Fixing, testing and commissioning of raised toilet seat with cover for handicap toilet including providing & fixing CP bolts, nuts, fisher/anchor bolt are required for hangong of WC complete with all accessories. Including cutting & making good the walls & floors wherever required. Each 14491 1

N.S Providing, Fixing, testing and commissioning of wall mounted 32 mm dia seamless stainless steel tube coated with nylon non-slip gripping surface hinged Hand Rail 750 x 100 mm complete in all respects, including cutting and making good the wall wherever required. Each 11449 1

N.S Each 3234 2

N.S Supply, Fixing, testing & commissioning of storage type stainless steel water cooler with inbuilt RO system, including angle valve and flexible connection piping of the following capacity. It shall have C.P brass push cock complete with inlet float valve (with angle valve) with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required. Each 95000 1

TOTAL FOR SANITARYWARE & C.P FITTINGS =

17.35 Providing and fixing soil, waste and vent pipes:

A 17.35.1 100mm dia

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as/IS: 3989 Mtr. 1036.5 40

B 17.35.2 75mm dia

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989 Mtr. 907.3 30

17.37 Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc.

A 17.37.1 For 100 mm dia pipe Each 178.5 20

B 17.37.2 For 75 mm dia pipe Each 174.5 15

17.38 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Centrifugally cast (spun) iron S & S pipe as per IS: 3989 Each 597.6 10

17.39 Providing and fixing plain bend of required degree.

17.39.1.2 Centrifugally cast (spun) iron S & S pipe as per IS: 3989 Each 439.7 20

17.43 Providing and fixing single equal plain junction of required degree with acesses door, insersion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS 3989 Each 731.4 20

17.44 Providing and fixing single equal plain junction of required degree.

17.44.1.2 Sand cast iron S&S as per IS 3989 Each 707.3 20

17.44.2.2 Sand cast iron S&S as per IS 3989 Each 498.9 20

17.48 Providing and fixing single unequal plain junction of required degree.

17.48.1.2 Sand cast iron S&S as per IS 3989 Each 841.1 20

17.56 Providing and fixing terminal guard.

17.56.1.2 Sand cast iron S&S as per IS 3989 Each 439.7 10

17.56.2.2 Sand cast iron S&S as per IS 3989 Each 311.6 5

17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS 3989 Each 439.7 10

17.57.2.2 Sand cast iron S&S as per IS 3989 Each 271.4 5

17.58 Providing lead caulked joints to sand cast iron / centrifugallly cast (spun) iron pipes and fittings of diametre:

17.59 Providing and fixing M.S stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diametre.

17.6 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.

17.60.1 100mm inlet and 100mm outlet

17.60.1.1 Sand cast iron S&S as per IS 3989 Each 1129.2 10

17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

18.58 Providing and fixing 125 mm dia, 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.

18.58.2 Rectangular type with openable circular lid

18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. Each 169.7 20

12.78 Providing and fixing on wall face unplasticised-PVC(working pressure 4 kgf per sqcm) rain water pipes conforming to IS : 4985 including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.

A 12.78.1 75mm diameter Mtr. 162.7 20

B 12.78.2 110 mm diameter Mtr. 257.5 15

12.79 Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.

12.79.1 Coupler

12.79.3 Single tee with door

12.8 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete.

12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. Each 189.4 8

TOTAL FOR SOIL, WASTE, RAIN WATER PIPES & ACCESSORIES =

S.H. - III : INTERNAL WATER SUPPLY

18.12 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Exposed on walls

a 18.12.1 15 mm dia nominal bore Mtr. 197.6 0

b 18.12.2 20mm dia nominal bore Mtr. 245.4 0

c 18.12.3 25mm dia nominal bore Mtr. 342 30

d 18.12.4 32mm dia nominal bore Mtr. 381.7 30

e 18.12.5 40 mm dia nominal bore Mtr. 476.8 30

f 18.12.6 50mm dia nominal bore Mtr. 572.6 25

g 18.12.7 65mm dia nominal bore Mtr. 667.7 20

h 18.12.8 80mm dia nominal bore Mtr. 818.2 25

18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

a 18.40.1 15 mm dia nominal bore Mtr. 6.7 0

b 18.40.2 20mm dia nominal bore Mtr. 7.8 0

c 18.40.3 25mm dia nominal bore Mtr. 10 30

d 18.40.4 32mm dia nominal bore Mtr. 11.8 30

e 18.40.5 40 mm dia nominal bore Mtr. 13.4 30

f 18.40.6 50mm dia nominal bore Mtr. 15.8 25

g 18.40.7 65mm dia nominal bore Mtr. 19.4 20

h 18.40.8 80mm dia nominal bore Mtr. 22.5 25

18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.5 40 mm nominal outer dia Pipes Mtr. 538.4 25

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.

Concealed work including cutting chases and making good the walls etc.

a 18.8.1 15mm nominal outer dia pipes Mtr. 278.2 50

b 18.8.2 20mm nominal outer dia pipes Mtr. 350.8 40

c 18.8.3 25mm nominal outer dia pipes Mtr. 463.1 30

d 18.8.4 32mm nominal outer dia pipes Mtr. 549.8 20

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a 18.17.1 25 mm nominal bore Each 532.3 4

b 18.17.2 20 mm nominal bore Each 465.4 0

c 18.17.3 32 mm nominal bore. Each 589.9 2

11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

a 11.1 40 mm dia Each 3368 4

b 11.2 50 mm dia Each 3385 1

c 11.3 65 mm dia Each 3864 1

d 11.4 80mm dia Each 4588 1

e 11.5 100mm dia Each 6056 0

15 Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

a 15.1 80mm dia Each 4325 1

b 15.2 100mm dia Each 6048 1

N.S Providing and fixing brass Single acting air valve PN 1.6 of approved quality with bolts, nuts, rubber insertion, tail pieces, tapers etc. if required as complete.

25 mm dia Each 669 1

N.S Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc., complete.

a N.S 25 mm dia Each 9568 0

b N.S 32 mm dia Each 20734 0

c N.S 40 mm dia Each 21368 1

d N.S 50 mm dia Each 22708 0

e N.S 65 mm dia Each 27509 0

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,utlet and overflow pipes but without fittings and the base support for tank Per litre 9.7 3000

TOTAL FOR INTERNAL WATER SUPPLY =

S.H -IV: EXTERNAL SEWERAGE SYSTEM WORK

2.1 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

2.10.1 All kind of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 391.7 60

2.11 "Extra for excavating trenches for pipes, cables etc.in all kinds of soil for depth exceeding 1.5 m , but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 meter.)

2.11.1 All kind of soil

2.11.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 517.9 30

2.12 Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 3.0 m in depth but not exceeding 4.5 m.(Rate is over corresponding basic item for depth upto 1.5 Metre.)

2.12.1 All kind of soil

2.12.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 708.3 4

18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :

18.27.3 150 mm diameter Mtr. 1776.8 10

18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :

18.28.3 150 mm diameter Mtr. 337.4 15

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

a 19.1.1 100 mm diameter Mtr. 280.6 0

b 19.1.2 150 mm diameter Mtr. 464.3 30

c 19.1.3 200 mm diameter Mtr. 682.6 0

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) all-round S.W. pipes including bed concrete as per standard design.

a 19.2.1 100 mm diameter Mtr. 404.3 0

b 19.2.2 150 mm diameter Mtr. 494.4 30

c 19.2.3 200 mm diameter Mtr. 576.3 0

19.4 Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as/standard design.

19.4.3 180x150 mm size P type

19.4.3.2 With Sewer bricks conforming to IS : 4885 Each 2006.9 2

19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With F.P.S. bricks (For Sewer) Each 7914.7 2

19.8 Extra depth for manholes

19.8.1 Size 90 x 80 cm

19.8.1.1 F.P.S. bricks (For Sewer) Each 5660 2

19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

With Sewer bricks conforming to IS : 4885 (For Sewer) Each 7090 2

19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom)

With Sewer bricks conforming to IS : 4885 (For Sewer) Mtr. 4917.95 2

19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. Each 310.9 10

TOTAL FOR EXTERNAL SEWERAGE WORK =

S.H -V: EXTERNAL STORM WATER DRAINAGE WORK

2.1 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

2.10.1 All kind of soil

2.10.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 391.7 60

2.11 "Extra for excavating trenches for pipes, cables etc.in all kinds of soil for depth exceeding 1.5 m , but not exceeding 3 m.(Rate is over corresponding basic item for depth upto 1.5 meter.)

2.11.1 All kind of soil

2.11.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 517.9 50

2.12 Extra for excavating trenches for pipes, cables, etc.in ordinary/hard rock exceeding 3.0 m in depth but not exceeding 4.5 m.(Rate is over corresponding basic item for depth upto 1.5 Metre.)

2.12.1 All kind of soil

2.12.1.2 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia Mtr. 708.3 10

19.6 Providing, laying Non pressure NP2 class (light duty) RCC Pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete.

a 19.6.2 150mm dia RCC pipe Mtr. 410.7 40

b 19.6.3 250mm dia RCC Pipe Mtr. 677.4 30

c 19.6.4 300mm dia RCC Pipe Mtr. 780 10

d 19.6.5 450mm dia RCC Pipe Mtr. 1318.8 0

e 19.6.6 500mm dia RCC Pipe Mtr. 1570.8 0

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) all-round S.W. pipes including bed concrete as per standard design.

a 19.2.2 150 mm diameter Mtr. 494.4 30

19.3 Providing and laying cement concrete 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 20mm nominal size) up to haunches of SW/RCC Pipes including bed concrete as/standard design:

a 19.3.4 250mm dia RCC Pipe Mtr. 426.1 25

b 19.3.5 300mm dia RCC Pipe Mtr. 491.7 6

4.1 Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 20 mm nominal size) alround stoneware/RCC pipes including in bed for pipes to be laid in trenches as per standard details.

4.1.10 1:5:10(1 Cement :5 coarse sand:10 graded stone aggregate 20 mm nominal size) cum 2731.5 2

This item for 300 & 450 mm diameter RCC pipe alround, haunches & bed concrete as per standard design:

19.7 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90x80 cm and 60 cm deep including CI Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With F.P.S. bricks (For Sewer) Each 7914.7 3

19.8 Extra depth for manholes

19.8.1 Size 90 x 80 cm

19.8.1.1 F.P.S. bricks (For Sewer) Each 5660 2

19.9 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

With Sewer bricks conforming to IS : 4885 (For Sewer) Each 7090 1

19.1 Extra depth for circular type manhole 0.91m internal dia (at bottom)

With Sewer bricks conforming to IS : 4885 (For Sewer) Mtr. 4917.95 1

19.11 Constructing brick masonry circular type manhole 1.2 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :

19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately)

19.11.1.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (For Storm) Each 13865 1

19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom)beyond 1.68 m to 2.29 m :

19.12.1 With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 (For Storm) Mtr. 6283.7 1

19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. Each 310.9 8

19.27 Constructing brick masonary road gully chamber 50x45x60cm with bricks of class designation 75 in cement morter 1:4 (1 cement : 4 coarse sand) including 500 x 450mm precast RCC horizontal grating complete as per standard design

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 3743.3 4

TOTAL FOR EXTERNAL STORM WATER WORK =

S.H -VI: EXTERNAL WATER SUPPLY WORK

18.12 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Exposed on walls

a 18.12.3 25mm dia nominal bore Mtr. 342 0

b 18.12.4 32mm dia nominal bore Mtr. 381.7 0

c 18.12.5 40 mm dia nominal bore Mtr. 476.8 0

d 18.12.6 50mm dia nominal bore Mtr. 572.6 0

e 18.12.7 65mm dia nominal bore Mtr. 667.7 20

f 18.12.8 80mm dia nominal bore Mtr. 818.2 30

18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

a 18.40.3 25mm dia nominal bore Mtr. 10 0

b 18.40.4 32mm dia nominal bore Mtr. 11.8 0

c 18.40.5 40 mm dia nominal bore Mtr. 13.4 0

d 18.40.6 50mm dia nominal bore Mtr. 15.8 0

e 18.40.7 65mm dia nominal bore Mtr. 19.4 20

f 18.40.8 80mm dia nominal bore Mtr. 22.5 30

18.41 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :

a 18.41.3 25mm dia nominal bore Mtr. 21.1 0

b 18.41.4 32mm dia nominal bore Mtr. 21.6 0

c 18.41.5 40mm dia nominal bore Mtr. 21.9 0

d 18.41.6 50mm dia nominal bore Mtr. 22.7 0

e 18.41.7 65mm dia nominal bore Mtr. 35.8 20

f 18.41.8 80mm dia nominal bore Mtr. 36.9 30

11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

a 11.2 50 mm dia Each 3385 0

b 11.3 65 mm dia Each 3864 1

c 11.4 80mm dia Each 4588 3

14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

a 14.2 50 mm dia Each 5390 0

b 14.3 65 mm dia Each 6024 0

c 14.4 80 mm dia Each 7287 2

18.59 Providing & fixing C.I. double acting air valve of approved quality with bolt, nuts, rubber insertions etc. complete. (The tail piece if required will be paid separately)

a 18.59.2 80 mm dia Nominal bore Each 6085.8 2

18.6 Providing & fixing enclosed type water meter (bulk type) conforming to IS:2373 and tested by municipal board complete with bolts, nuts, rubber insertions etc.(The tail piece if required will be paid separately)

18.60.1 80 mm dia Nominal bore Each 3533.7 1

18.34 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

18.34.1 With common burnt clay F.P.S.(non modular) bricks of class designation 100A Each 13559.9 1

TOTAL FOR EXTERNAL WATER SUPPLY WORK =

TOTAL FOR PHE WORK=

S.H. I : WIRING

1.3.3 Group C Point 1146 210

2.12 S/F 'C' series, SP MCB: Supplying and fixing following rating, 240/415 volts, 'C' curve, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) 2.12.1 6/32 amps, single pole Each 237 40

(c ) 2.12.3 40 amps, single Pole and neutral Each 1044 25

2.2 Providing and fixing M.V danger notice plate of 200mmx150mm made of mild steel at least 2mm thick, vitreius enameled white on both side and with inscription in singale red colour on front side in excluding cubical panel as required. Each 214 4

2315 Providing and fixing C.T. coil as per require load in amps in side in excluding cubical panel as required. Each 800 4

2314 Providing and fixing slector switch for analog ammmeter as per require load in amps on front side in excluding cubical panel as required. Each 300 4

2313 Providing and fixing Pilot lamp for indicator on front side in excluding cubical panel as required. Each 148 6

3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. Mtr. 144 60

7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Q.R Each 139800 1

Q.R Each 48000 1

Q.R Each 26800 16

Q.R Each 352000 1

Q.R Each 111200 1

Q.R Each 24800 12

Q.R Each 133200 3

Q.R Each 98200 1

Q.R Each 63600 2

Q.R Each 25400 4

Q.R Each 62800 1

Q.R Each 86000 2

Q.R Each 25400 2

Q.R Each 63600 1

Q.R Each 89000 1

Q.R Each 32800 1

Q.R Each 14000 2

Q.R Each 148600 4

Q.R Each 33600 10

Q.R Each 14000 24

Q.R Each 89000 6

Q.R Each 124800 24

Q.R Each 24800 24

Q.R Each 32800 21

a Each 174640 24

Supply & Intallationof VRV system Air-Conditioning Systems

N.S-20 Variable Refrigerant Flow System Outdoor Unit : Supplying, Installation, testing & Commissioning of Outdoor VRV/VRF unit in modular design complete, cooling and heating complete with air cooled condenser with low noise fan having inter-connected control wiring, refrigerant piping with Standard accessories, duly charged with R410 A refrigerant with suitable size MS channel stand , duly painted complete as required. VRV/VRF System shall be suitable for working on 49*C ambient temperature with refrigerant R-410a with MS channel outdoor Stand of Suitable size to cary the weight of outdoor unit inclusive of full charge of Refrigerant Gas & oil etc. Complete as required. The COP of System mentioned below shall be not less then 4.7 at 50% load at 35*C ambient temp, at 27*C DB, 19*C WB inside temp. Make: Carrier/Toshiba/O-General 16 HP ODU (38VT016173HQSS) Each 482143 2

N.S-23 Indoor Units : 1.3 Tr / 1.7 HP 4- Way Cassette (Model no 40VU016C-7G-QEE) Indoor Unit : Supplying, Installation, testing & Commissioning of 1.3 Tr / 1.7 HP 4- Way Cassette Indoor Unit all complete as per companys specification and direction of E/I. Each 53016 12

N.S-25 Indoor Units : 4.0 Tr / 5 HP 4- Way Cassette (Model no 40VU048C-7G-QEE) Indoor Unit : Supplying, Installation, testing & Commissioning of 4.0 Tr / 5 HP 4- Way Cassette Indoor Unit all complete as per companys specification and direction of E/I. Each 55538 4

N.S-26 Supply, Installation, Testing, Commissioning of Cordless Remote controller. Each 2855 16

N.S-27 Supply, installation, testing & commissioning of Copper Refrigerant Piping Y- Joints & Headers as required to connect the indoor units complete. ( The price of Y-joint Should be of set - one for gas line & one for liquid line) Each 10630 40

N.S-28 6.4 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System Make: Daikin/Carrier/Toshiba/O-General complete with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 355 40

N.S-29 9.5 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System Make: Daikin/Carrier/Toshiba/O-General complete with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 480 100

N.S-30 12.7 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe Make: Daikin/Carrier/Toshiba/O-General for VRV/VRF System complete with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 676 60

N.S-31 15.9 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System Make: Daikin/Carrier/Toshiba/O-General complete with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 854 200

N.S-32 19 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System complete Make: Daikin/Carrier/Toshiba/O-General with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 1026 60

N.S-33 22.2 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System Make: Daikin/Carrier/Toshiba/O-General complete with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 1256 80

N.S-34 25.4 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System complete Make: Daikin/Carrier/Toshiba/O-General with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 1484 30

N.S-35 28.6 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System complete Make: Daikin/Carrier/Toshiba/O-General with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 1609 90

N.S-36 31.8 mm Copper pipe with 19 mm thick insulation:Supply, Installation, Testing and Commissioning of Interconnecting refrigerant Copper pipe for VRV/VRF System complete Make: Daikin/Carrier/Toshiba/O-General with (19mm/ 13mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifitions, all piping shall be properly supported with MS hanger all piping shall be properly supported with MS hanger & clamps to make the system complete. Nominal dia. in mm. OD is mentioned below all complete as per companys specification and direction of E/I. R.M 1698 30

N.S-37 Supplying and installating following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns )with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required. 450 mm width X 50 mm depth X 2.0 mm thickness all complete as per companys specification and direction of E/I. R.M 1409 40

N.S-38 Supplying and installating following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns )with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness all complete as per companys specification and direction of E/I. R.M 1016 50

N.S-39 Supplying and installating following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns )with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.60 mm thickness all complete as per companys specification and direction of E/I. Each 748 150

N.S-40 Control and Transmissing Wiring: Supply & Drawing of control cum transmission wiring of 2 Core x 1.5 Sqmm PVC Insulated and PVC Round Sheathed Multi Core Copper Conductor Heavy Duty Industrial cable For Voltage Grade 1100 Volts as per IS:694: 1990 in the exiting PVC condutis between indoor and outdoor unit & outdoor units to central remote controllers etc. as reqd all complete as per companys specification and direction of E/I. R.M 207 400

N.S-41 25mm Dia with insulation Condensate Drain Piping: Supplying, installation, testing and commissioning of PVC (Minimum 15kg/sqcm pressure rated) Drain Water piping complete with fitings (elbows, tees,reducers, sockets etc.), supports, jointing duly insulated with XLPE Class O tubular insulation and any other item required to make the system complete. Nominal Diameters of pipes in mm as indicated above all complete as per companys specification and direction of E/I. R.M 343 180

N.S-42 32 mm Dia with insulation Condensate Drain Piping: Supplying, installation, testing and commissioning of PVC (Minimum 15kg/sqcm pressure rated) Drain Water piping complete with fitings (elbows, tees,reducers, sockets etc.), supports, jointing duly insulated with XLPE Class O tubular insulation and any other item required to make the system complete. Nominal Diameters of pipes in mm as indicated above all complete as per companys specification and direction of E/I. R.M 446 50

N.S-43 40 mm Dia with insulation Condensate Drain Piping: Supplying, installation, testing and commissioning of PVC (Minimum 15kg/sqcm pressure rated) Drain Water piping complete with fitings (elbows, tees,reducers, sockets etc.), supports, jointing duly insulated with XLPE Class O tubular insulation and any other item required to make the system complete. Nominal Diameters of pipes in mm as indicated above all complete as per companys specification and direction of E/I. R.M 617 140

N.S-44 Miscellenious work like cutting/chiseling walls and its repairing as required for the air conditioning work.all complete as per companys specification and direction of E/I. Circuit 11600 8

N.S-45 MV Panel : Supplying ,installation, Testing and Commissioning of 400mm deep Outdoor type feeder Piller Cubical type L.T Panel, double door with locking arrangement tatally enclosed suitable for 415V , 3 phase 4wire , IP Protection shall be IP-54, 50 Hz AC supply System, fabricated in compartmentalized from CRCA Sheet Steel of 2 mm thick for frame work & cover, 3mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade having 4 strips aluminium alloy busbars of high conductivity, DMC/ SMC bus bars supports, with shortcircuite with stand capicity of 31 MVA for 1 sec., bottom base channel of Ms section not less than 100mm x 5mm thick. 2 Nos . 20 x5mm copper Strip shall be fixed all around the panel connected to 2 Nos . earth bus copper strips connectrion from main busbar to switch gears as required size of A1. bus bar and control wiring minium 2.5 sq.mm. PVC insulated FRLS copper conductor single core cable, cable alloys, cable gland plates in two half, fixed on MS angle iron frame long legs out of which 45cm duly grouted in cement concrete 1:2:4 ( 1 cement :2 sand :4 stone aggrete 20mm) etc. as reqd. Incoming:4 Pole MCCB 250 amp (ICS=ICU=100%) 36 kA, with phase spreader links and barrier, Solid neutral link. - 1 No.1 Set of 250 Amp Aluminium Bus Bar - 1Set,Phase indicated LED lamps - 1 set of 3 Nos. RYB ,MCB 'C' Curve Breaker , ON/ OFF' Indicating Light, CT's 250/5 - 1 Set, Outgoing: 63 A TPMCCB ICU 100% @ 16KA - 6 Nos all complete as per companys specification and direction of E/I. Each 532692 1

2217 4 core 10 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor. Mtr 95.2 150

2204 4 core 16 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor. Mtr 105.7 150

7.1 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

7.1.1 Upto 35 sq. mm Mtr 144 300

N.S-48 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed armoured electrical cable with aluminium conductor for working voltage upto 101 KV ete as required. 500 sq. mm., 3.5 core all complete as per companys specification and direction of E/I. Mtr 6811 30

1.21 S/F PVC conduit :- Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

1.15 Wiring in existing conduit :- Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in existing surface / recessed PVC conduit as required .

S /F four pole, MCB isolator:- Supplying and fixing following rating , four pole 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.16.1 40 amps Each 495 10

2.12 S/F 'C' series, SP MCB:- Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.7 50/63 amps, TPN Each 1635 8

3.16 P/F 6 SWG GI loop earthing wire in surface / recess:- Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. R.M 38 180

N.S-66 Supplying fitting and fixing Digital EPABX with 8 Trunk line, 8 Digital, 768 analog set further expandebale to 1056 ports Make: Syntel Model: Neos infinity inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 2862967 0

N.S-67 Supplying fitting and fixing Key phone/ Digital set Make: Neos Model ST26 inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos 24975 4

N.S-68 Supplying fitting and fixing Analog set with caller ID Beetel inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 959 150

N.S-69 Supplying fitting and fixing Cabling 2 Pair Telephone with PVC Pipe inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Mtr. 69 4000

N.S-70 Supplying fitting and fixing 100 Pair Telephone wire with PVC Pipe inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Mtr. 1096 200

N.S-71 Supplying fitting and fixing 1000 Pair Junction Box with Krone inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 34264 1

N.S-72 Supplying fitting and fixing 100 Pair MDF with IDF inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 10279 8

N.S-73 Supplying fitting and fixing RJ 11 complete set inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 391 200

Total For EPABX Work =

N.S-74 Supplying fitting and fixing 2 MP Bullet Camera (CP Plus/Panasonic/D-Link make )2 MP resolution: 1920 x 1080, H 265 codec compression, upto 20 m IR distance, 3D DNR, digital WDR, HLC, BLC, defog, ICR auto switch , true day / night, ROI coding, IP 67 certified, supports dual streams, support mobile surveillance by smart phones with iOS and Android OS access through Honeywell NVR inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 8909 4

N.S-75 Supplying fitting and fixing 2 MP Dome Camera (CP Plus/Panasonic/D-Link make ) 2 MP resolution: 1920 x 1080, H 265 codec compression, upto 20 m IR distance, 3D DNR, digital WDR, HLC, BLC, defog, ICR auto switch , true day / night, ROI coding, IP 67 certified, supports dual streams, support mobile surveillance by smart phones with iOS and Android OS access through Honeywell NVR inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 8566 30

N.S-76 Supplying fitting and fixing NVR (CP Plus/Panasonic/D-Link make ) with IH +265/H.265/H.264 video formats, connectable to third party network cameras, upto 40 channel input, supports live view, storage and playback of the connected camera at upto 12 MP resolution, HDMI and VGA simultaneous output, HDMI video output at up to 4K(3840x2160) resolution 4 SATA interface, up to 10 TB for 1 HDD, IH+265 compression effectively reduces the storage space and costs by up to 75%, 2xRJ 45 self-adaptive 10/100/1000Mbps network interfaces smart search for the selected area in the video and smart playback to improve the playback efficiency, 2 way audio support, RAID support JBOD, RAIDO 40 channel NVR inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 44544 2

N.S-77 Supplying fitting and fixing Cabling with CAT 6cable with PVC conduit inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Mtr. 110 4000

N.S-78 Supplying fitting and fixing 4 TB Hard Disk inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 13020 2

N.S-79 Supplying fitting and fixing 24 Port POE Switch inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 39061 8

N.S-80 Supplying fitting and fixing 55" TV Display make LG/ Samsung inclusive of all taxes and royalty ,complete as per company specification and direction ofE/I. Nos 98681 2

N.S-88 Supplying fitting & fixing LAN Cabling with Cat 6 cable within PVC Conduit of make Dlink/Digisol inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Metre 110 800

N.S-89 Supplying fitting & fixing 24 Port switch 10/100/1000 of make Dlink/Digisol inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 25356 4

N.S-90 Supplying fitting & fixing 24 Port patch panel fully loaded of make Dlink/Digisol inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 8909 4

N.S-91 Supplying fitting & fixing 15 U Rack with Fans & PDU inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 17132 2

N.S-92 Supplying fitting & fixing 42 U Rack with Fans & PDU inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 74011 2

N.S-93 Supplying fitting & fixing RJ 45 Complete set inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 541 80

N.S-94 Supplying fitting & fixing Cat 6 Patch Cord 1 m inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 254 70

N.S-95 Supplying fitting & fixing Cat 6 Patch Cord 3 m inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 295 8

N.S-96 Supplying fitting & fixing of UPS 60 KVA model KEORTEVO UPS Make Numeric with MS Powder coated rack along with interconnecting cables inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 1363991 1

N.S-97 Supplying fitting & fixing of SMF Battery 12 V, 100 AH EXIDE inclusive of all taxes and royalty ,complete as per company specification and direction of E/I. Nos. 14496 30

Total For CCTV & Networking & UPS Inverter Work =

S.H. I : INTERNAL FIRE FIGHTING/SPRINKLER SYSTEM

7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

a 7.1 25 mm dia Metre 359 800

b 7.2 32 mm dia Metre 417 106

c 7.3 40 mm dia Metre 509 220

d 7.4 50 mm dia Metre 646

e 7.5 65 mm dia Metre 832

f 7.6 80 mm dia Metre 951

g 7.7 100 mm dia Metre 1316

h 7.8 150 mm dia Metre 1856

i 7.9 200 mm dia Metre 2692 25

9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required:

9.2 Single headed Stainless steel set 5722 10

16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

16.2 Stainless Steel (Grade 304) set 4445 20

17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket :

18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:

18.2 Stainless Steel (Grade 304) Nos. 1631 10

20 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and Painting with synthetic enamel paint of approved shade as required. set 17707 4

21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :

21.2 Pendent Sprinkler/Upright Sprinkler Each 408 150

21.3 Horizontal side wall sprinkler Each 505 0

23 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

23.1 100 mm dia Each 7111 0

23.2 150 mm dia Each 8634 4

24 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required

24.1 150mm dia Each 47728 1

25 Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

N.S Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT' written in front.

Approximate size 2100x1200x600 mm. Each 13750 8

N.S Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 complete and of dial dia 150 mm. Each 2760 8

N.S Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. Each 910 8

N.S Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. Each 6150 8

N.S Supply, Installation, Testing & Commissioning of 'ABC' stored pressure type Dry chemical powder (Mono-Ammonium Phosphate) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS:15683, 6.0 Kg. Each 3680 8

N.S Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) trolly mounted fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. Each 34250 1

N.S Supply, Installation, Testing & Commissioning of ISI marked (IS:10204) trolly mounted Fire Extinguisher, mechanical foam type capacity 50 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension. Each 28240 1

Total For INTERNAL FIRE FIGHTING =

S.H. II : EXTERNAL FIRE HYDRANT SYSTEM PIPES & ACCESSORIES

6 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

6.2 150 mm. Dia Metre 2314 40

10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

10.2 Single headed Stainless steel set 5722 4

13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. Each 1236 4

19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

19.2 4 way - 150 mm dia M.S. Pipe Each 13636 3

N.S Providing and placing in proper position controlled percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type stainless steel 63 mm dia, ISI marked male & female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire. Each 5002 8

N.S Providing and fixing weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 4 nos.15m long hose, 2 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75m x 0.6m x 0.25m). Each 3875 4

N.S Supply, installation, testing & commissioning of gun metal 2 way Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia. GI suction pipe and 150 mm dia. 1 No. CI foot valve flanged (to be connected to static water tank). Each 4654 1

N.S Providing and fixing MS cabinet (to enclose above Draw-out/Fire brigade inlet connections) fabricated from 16g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.75 m x 0.6 m x 0.45 m). Each 4113 4

N.S Providing and fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-20 kg/cm2 complete and of dial dia 150 mm. Each 1386 4

External Piping

N.S Supply, installation, testing & commissioning of mild steel black pipe (IS:1239/IS:3895) heavy class including cutting, screwing, welding etc. complete with fitting viz. tees elbow, bends, flanges, reducers etc. including providing anti-corrosive treatment (coating and wrapping) with 4 mm thick tape and holiday test check as per IS:10221 complete as required. Note : Pipes upto and 50 mm dia shall be threaded joints, above 50mm shall be welded joints.

a 100 mm dia Metre 1800 0

b 80 mm dia Metre 1350 50

Total For EXTERNAL FIRE HYDRANT =

S.H. III : FIRE PUMPS,VALVES & ACCESSORIES

DIESEL ENGINE CONTROL Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons,start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.

22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. Each 1442 2

DSR (E&M) Hot Dipped Galvanized Iron Cable Tray

DSR-2018/4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

a DSR-2018/4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 644 4

b DSR-2018/4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 875 5

DSR-2018/4.7 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

a DSR-2018/4.7.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 1168 2

b DSR-2018/4.7.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1713 2

DSR-2018/4.8 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

a DSR-2018/4.8.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 1274 2

b DSR-2018/4.8.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 1997 2

DSR-2018/4.9 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

a DSR-2018/4.9.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 1274 2

b DSR-2018/4.9.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 2194 2

DSR-2018/4.10 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.

a DSR-2018/4.10.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 2618 4

DSR-2018/5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Metre 206 200

DSR-2018/5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 57 100

DSR-2018/9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required.

a DSR-2018/9.1.8 3 core x 16 Sq.mm. Aluminium Armoured Each 222 2

b DSR-2018/9.12 3 core x 70 Sq.mm. Aluminium Armoured Each 339 2

c NS 4 core x 2.5 Sq.mm.copper conductor Aluminium Armoured control cable Each 190 4

NS Supply, Laying, Fixing, Testing and Commissioning of following sizes of XLPE insulated PVC sheathed armoured Copper/aluminium conductor cable of 1.1 KV grade on existing cable tray/surface as required.

a.) 4 core x 2.5 Sq mm copper conductor armoured control cable. Metre 289 125

b.) 3 core x 16 Sq.mm. Aluminium Armoured Cable Metre 295 75

c.) 3 core x 70 Sq.mm. Aluminium Armoured Cable Metre 715 50

NS Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 10.5 kg/cm2 and test pressure 16 kg/cm2 with unit control.

a.) 65 mm dia Each 4500 2

b.) 80mm dia Each 5500 2

c.) 100mm dia Each 6500 2

d.) 150 mm dia Each 8800 3

e.) 200 mm dia Each 10500 3

NS Providing and fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superior quality having minimum working pressure of 20 kg/cm2.

a.) 25mm dia Each 1200 4

b.) 50mm dia Each 3800 2

c.) 65mm dia Each 4250 2

NS Providing, fixing, testing and commissiong of standard mild steel flanges, (only in valves, strainers, expansion joint and pumps matching flanges) screwed or welded complete with 1.5mm thick compressed asbestos gasket, nuts, bolts and washers etc., complete including testing of joints. The flanges shall be as/ IS 6392 table E.

a.) 200mm dia Each 990 12

b.) 150mm dia Each 650 22

c.) 100mm dia Each 450 6

d.) 80mm dia Each 400 12

e.) 65mm dia Each 350 6

f.) 50mm dia Each 325 6

NS Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, sprinkler pump and Jockey pump at drop of pressure, automatically at required pressure setting :

Recommended dia. : 450mm

Height of shell : 2000mm

Working pressure : 10.5 kg/cm2

Test Pressure : 16 kg/cm2 Each 36500 1

Total For FIRE PUMPS =

S.H-IV: FIRE DETECTION AND FIRE ALARM SYSTEM WORK

17.1 FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

17.1.1 Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. Each 1058 24

17.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Each 1141 60

17.1.3 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. Each 462 8

17.1.5 Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. Each 184 32

17.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Each 545 8

17.1.9 Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

17.2.1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

17.2.1.1 Ten Loop Panel Each 454896 1

17.3.1 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. Each 126399 1

17.3.3 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. Each 1780 20

17.3.6 Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required. Each 96767 1

17.3.8 Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required. Each 10132 8

17.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable,600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Mtr 328 300

17.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

17.5.3.4 speaker cable Four pair, 2-core, 1.5 sqmm Mtr 155 100

1.21 S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required.

N.S-105 KANEX 4.5 kg CO2 High Pressure Portable Fire Extinguisher, filled with Co2 Gas as per IS 15222, Gross Weight 16.4, empty weight 11.9 Kg, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 21B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2006 and ISI maked. Each 13009 10

Total For Fire Detection & Alarm Work =

Total For Fire Fighting Work =

Total For Fire Fighting Work =

MATERIAL ANALYSIS FOR CARRIAGE

Sr No. Item/Particular Quantity Cement in (Bags) Fine Aggregate (in Cum) Coarse Aggregate (in Cum) Bricks (in Nos.)

Renovation for Establishment of co-working space startup business centre at BSFC Building, Frazer Road.

1 B/w in foundation and plinthin C.M(1:6)

2 125mm thick B/w in C.M(1:4) 0

3 Flat Brick Soling

4 P.C.C M-150 in Foundation & Grading roof

5 R.C.C in foundation (1:1:2)

6 R.C.C. In beam,slab,columns (1:2:4)

7 12mm cement plaster in C.M(1:6)

8 6mm thick Cement plaster in C.M(1:4) 0

9 20mm cement plaster in C.M(1:6)

10 20mm cement mortar in FlooringC.M(1:4) 0

11 Local sand filling in plinth

A Total Quantity of Cement(Bags)

B Total Quantity of sone sand(Cum)

C Total Quantity of Coarse Aggregate 20mm (Cum)

Add 5% for westage

Total nos of bricks

CARRIAGE OF MATERIALS

I BRICKS(Per 1000) carriage to 8 km.

Loading and unloading . 825.84

Haulage = Rs. 33.26per km. x 8

Carriage per thousand =

II Local Sand carriage to 3 km.

Loading and unloading . 195.1

Haulage = Rs. 17.92 per km. x 3

Carriage per cum =

III Coarse sand (45 km lead from Koelwar )

Loading and unloading . 195.1

Haulage = Rs. 17.92per km. x 45

Carriage per cum =

IV Stone Chips (110 km lead from Gaya)

Loading and unloading . 195.1

Haulage = Rs. 17.92 per km. x 110

Carriage per cum =

V EXTRA FOR BRICKS (PER 1000)

PATNA URBAN 2602A 6075

Total ( + )1223

VI EXTRA FOR CEMENT (PER MT )

PATNA 0367A 5000

RATE ANALYSIS .

Item No. Description Unit Amount Remarks

N.S.-1 Providing and fixing Diamond Grey finish system aluminium doors & windows of Fenesta/AIS/Eternia series of Hindalco with the company having its own/ fabrication facility and control the entire cycle from Fabrication to installation to post sales services. Aluminum profile frame should be powder coated of 65-90 microns, using vertical coating process from a QUALICOAT certified facility and profile must undergo sublimation process for transferring patterns on it. Window and doors profile must be of high grade 6063 T6 and gauge shoul vary from 1.2 mm to 4.5 mm as per the design & system requirement. All hardware fitted must be of SS 304 grade except handle to be of zinc/aluminium alloy casted and powder coated with weather seal (EPDM/TPE). There shall be Warranmty of 10 years on profile & hardware from the date of installation along with 4/5/6 mm clear transparent/ tinted/equivalent toughened glass as per approval. Two track two panel sliding window without mesh of outer frame 45mm x 37.5 mm and sash 28mm x 58 mm both having wall thickness of 1.2 mm to 1.4 mm and single glazing bead of appropriate dimension for 4/5/6 mm toughened glass as per approved drawings and instruction of Engineer-in-charge.

Basic Rate of The Material Sqm. Rs. 13579.12

Add for GST @ 18% Sqm. Rs.

Add for CP & OH @ 15% Sqm. Rs.

Add For Labour cess. @ 1 % Sqm Rs

Say Sqm. Rs. 18611

Rate Per Sqm.of System Aluminium Doors & Windows = Rs. 18611.00/ Sqm.

NS-2 Supplying fitting and fixing of Marvel Make Roller Blinds as per company specification and as per approved colour and sample inclusive of all taxes and royalty all complete as per specifications / approval and direction of Engineer-in-Charge.

Basic Rate of The Material Sqm. Rs. 2421

Add for Wastage @ 5% Sqm. Rs.

Add for OH & CP @ 15% Rs.

Add For Labour cess. @ 1 % Sqm. Rs.

Rate per sqm Roller blinds (Say) = Rs.2953.00

N.S. 3A Providing and fixing wooden door Latch with necessary screws etc. complete.

Basic Rate of The Material Each Rs. 2500

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Each Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 3422 / Nos.

N.S. 3B Providing and fixing wooden door handle 300 mm with necessary screws etc. complete.

Basic Rate of The Material Each Rs. 6900

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Each Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 9445 / Nos.

N.S. 3C Providing and fixing wooden door handle 450 mm with necessary screws etc. complete.

Basic Rate of The Material Each Rs. 11000

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Each Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 15057 / Nos.

N.S-4 Supplying fitting and fixing Glass door handles, H-Type (QBGHL-5) made up of Stainless Steel brushed steel finish 300 mm heigh/equivalent make all complete including taxes and royalty as per approval and direction of E/I.

Basic Rate of The Material Each Rs. 2515

Add for fixing charge @ 175/Each. Rs. 175

Add for OH & CP @ 15% Rs.

Add For Labour cess. @ 1 % Rs.

Rate each Number of H-Type Glass Door Handles (Say) = Rs.3125.00 / Each

N.S.-5 Providing & fixing double skin laminated both side WPC partition upto specified height with 1.0 mm lamination of greenply/ marino/ century mica over 12 mm thick WPC of ALSTONE/ greenply / CENTURY (MIN WT. 550KG/cum) make fitted and fixed both sides over aluminium frame of 50 x 50mm posts at 60 cm centres and 50x50mm horizontal members at approx 60 cm centers including cost of anchoring the partition to floors, walls and ceiling properly as per drawing including making hidden doors as per drawing all complete as per drawing, specifications and direction of E/I.

Assuming 3.0 m x 2.4 m partition=7.2 sqm

Qty. of Aluminium

Post: 6Nos. x 2.4 mtr @ 0.88 Kg/mtr 12.7 kg

Runner: 5 x 3.0 mtr @ 0.88 kg/mtr 13.2 kg

Add 5% wastage kg

Qty. of 12 mm thick WPC board

12 mm : 2x 3 mtr x 2.4 mtr sqm

Add 5% wastage sqm

Qty. of 1.0 mm thick decorative laminated sheet

Laminate : 2x 3 x2.4 sqm

Add 5% wastage sqm

7306 Cost of Aluminium T or L section:27.2 kg @ Rs. 190.0/kg Rs.

7391 Cost of Anodising Aluminium 25 microns:27.2kg @ Rs. 48.0/kg Rs.

9988 Carriage of material:27.2 kg @ Rs. 2.12/kg Rs.

Q.R Cost of 12 mm thick WPC board:15.12 sqm.@ Rs.1345.0/sqm Rs.

8727 Cost of 1 mm thick decorative laminated sheet :15.12 sqm.@ Rs.294/sqm Rs.

586 Cost of chromium plated brass screw 30 mm: .70 nos @Rs. 2.90/each. Rs.

9999 Adhesive : 2X195X2.12 L.S Rs.

Cost of Door Fittings L.S. Rs. 200

Fixing to Ground L.S. Rs. 200

Labour charge @ 25% of material cost

Add for OH & CP @ 15% Rs.

Add For Labour cess. @ 1 % Sqm. Rs.

Total for 7.2 sqm. Rs

Rate per Sqm Sqm. Rs.

Rate per Sqm of both side laminated Aluminium Partition (Say) = Rs. 6603.00 / Sqm

NS-6 Providing and fixing of 600 mm high laminated & 1200 mm high graphic paper panelling upto specified height over 12 mm thick WPC board of Alstone / equivalent make fitted and fixed over Aluminium frame of 25 x 25mm posts at 30 cm centres and 25 x 25mm horizontal members at approx 30 cm centers including cost of anchoring the panelling to walls properly including termite treatment as per drawing specification and direction of E/I.

Assuming 3.0 m x 1.8 m Panelling = 4.8 sqm

Qty. of Aluminium

4.8 sqm x 3 kg/sqm Kg

Qty. of 12 mm thick WPC board

1x 3.0 x 1.80 m sqm

Add 5% wastage sqm

Qty. of 1.0 mm thick decorative laminated sheet

Laminate : 1x 3 x 0.6 1.8 sqm

Add 5% wastage sqm

Qty. of Graphic paper

Graphic paper : 1x 3 x1.2 3.6 sqm

Add 5% wastage sqm

7306 Cost of Aluminium T or L section:14.4kg @ Rs. 190.0/kg Rs.

7391 Cost of Anodising Aluminium 25 microns:14.4kg @ Rs. 48.0/kg Rs.

9988 Carriage of material:14.4kg @ Rs. 2.12/kg Rs.

N.S-5 Cost of 12 mm thick WPC board:5.67sqm.@ Rs.1345.0/sqm Rs.

8727 Cost of 1 mm thick decorative laminated sheet :1.89sqm.@ Rs.294/sqm Rs.

N.S-2A Cost of Graphic paper 3.78 sqm.@ Rs.1119.05 / sqm Rs.

587 Cost of chromium plated brass screw 30 mm: .70 nos @Rs. 2.40/each. Rs.

7022 Anti Termite Treatment 5 ltr /3.6 Sqm. @Rs. 150./ ltr chlorpyriphos 20% EC Rs.

9999 Adhesive : 195X2.12 L.S Rs.

Fixing to Wall L.S.(Anchoring the panel) Rs. 1200

Labour charge @ 25% of material cost

Add for OH & CP @ 15% Rs.

Add For Labour cess. @ 1 % Sqm. Rs.

Total for 4.8 Sqm. Rs

Rate per Sqm Sqm. Rs.

Say Rate per Sqm of laminated & paper Panelling (Say) = Rs. 5566.0/ Sqm

N.S.-7 Waterproofing of Horizontal & Vertical Surfaces with NITOPROOF 600 PE - Surface preparation: Clean all concrete surfaces free of laitance, dust, dirt, cavities, projecting nibs etc.by grinder and wire brush. Grease should be cleaned using a chemical degreaser and washed with clean water and allowed to dry. Remove all protrusions from concrete surfaces using a fine hair broom finish. Remove moss and lichen manually and treat the surface with a fungicide. Wash the surface thoroughly with clean water and allow it to dry. Standing water must be removed to prevent subsequent compromise of waterproof properties. Surface should be absolutely dry before application of Nitoproof600 PF.Priming: Prime the surface with Nitoproof WB primer by adding double the quantity of clean water by volume (4ltr water to 2ltr pack size, 12- liter water to 6ltr pack size) to the mix gradually under mixing which makes the mix as low viscous milky white liquid at consumption of 8-10m2 /liter (after dilution with water), 50-60m2 /2-liter pack (after dilution with water), 150- 180m2 /6ltr pack (after dilution with water).Application of waterproofing layer: Providing two coats of liquid applied, solvent-free, Non-toxic, Root resistance, elastomeric waterproofing membrane shall be made of hydrocarbon free polyurethane with at least 85-90% solid content-NITOPROOF 600 PF. with necessary surface preparation, coving, primer etc. The membrane when cured shall be capable of an extension of 500- 700%. Its tensile strength shall exceed 2.5 N/mm2 and the water vapour transmissions shall be less than 1g/m2/24 hour. The Product Should have the Following Properties: Adhesion-in-peel test (N) (ASTM C836): >60N, Recovery from 350% elongation (%) (ASTM D412-90): 95 Tear resistance (kN/m) (ASTM D624-00): 21, Water vapour transmission: 2.3mm film (g/m2/hr):0.6 Initial hardness (Shore A) (ASTM 2240-86): 65, Water permeability (DIN 1048): 0, Chemical resistance: Unaffected by mild acids, alkalis and water borne salts. Does not biodegrade all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Sqm Rs. 1500

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Sqm. Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 2056 / Sqm

N.S.-8 Separation layer: Laying 120 GSM geotextile membrane and overlap 50 mm both sides all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Sqm Rs. 150

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Sqm. Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 206 / Sqm

N.S.-9 Coving at all the junctions to be done for a size of 75mm X 75mm with polymer modified mortar prepared by mixing 50 kg cement + 150kg Sand + 4Litre of Nitobond SBR Latex + Water required for mortar consistency all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Mtr Rs. 200

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Mtr Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 274 / Mtr

N.S-10 Removal of Damaged Concrete-Removal of damaged concrete along with loose damaged and cracked concrete/cover concrete at all specified locations up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting to chipped concrete and reinforcement and removal and disposal of debris within owners premises including all plant and machineries. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed. Depth of chipping may very from 50 mm to 150 mm complete with labor, machinery, tools etc. all as directed by Engg.in charge. The edges of repair location shall be saw cut to a depth of at least 10 mm to avoid feather edgeing and provide a square edge. Removal of dust, loose particles, marine growth etc. from concrete surface manually by wire brush, mechanically or any other means to obtain a sound surface over areas other than above. inclusive of taxes royalty etc. all complete as per company's specification and direction of E/I.

Unit Amount Remarks

Basic Rate of The Material Sqm Rs. 500

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Sqm. Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 685 / Sqm

N.S-11 Rust Removal- Cleaning as directed & specified all rust/ scales/corrosion from reinforcement bars using rust remover Reebaklens RR of Fosroc or equivalent having Specific Gravity 1.16-1.22. The material to be applied to the rusted metal using brush and make leaving to dry for 30 mins & washing surface with fresh water as required to exposed reinforcement bars all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Unit Amount Remarks

Basic Rate of The Material Mtr Rs. 260

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Mtr Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 356 / Mtr

N.S. 12 Anti-corrosive coating: Anticorrosive Coating for corroded steel rebars- Removal of loose concrete upto 20mm beyond reinfrocement and treating the exposed reinforcement with alkaline ruste remover and then treat the steel with epoxy based zinc rich anti corrosive over the steel rebarrs. The zinch rich primer shall be applied at 40 microns dry film thickness and shall have salt spray resistance of <5 mg for 96 hours as per ASTM B-117 and adhesive bond strength > 1.5 MPa as per ASTM D4541,etc,all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Unit Amount Remarks

Basic Rate of The Material Mtr Rs. 370

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Mtr Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 507 / Mtr

N.S.-13 Epoxy Bonding Agent for concrete – Providing and applying bonding agent which shall be a solvent free epoxy based two component resin system . The bonding agent shall be applied by brush & should remain in tacky state after application for a minimum period of 5-6 hrs at 20 deg C & 2-3 hrs at 30 deg C. The product shall achieve 50 N/mm2 compressive strength, 20 N/mm2 tensile strength, 35 N/mm2 flexural strength and 10 N/mm2 shear strength as per BS 6319 standards. The adhesive bond to the concrete substrate shall exceed the tensile strength of the host concrete,etc all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Sqm Rs. 740

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Sqm. Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 1014 / Sqm

N.S.-14 Polymer modified Micro-concrete- Providing and applying Renderoc RG single component free flowing, non shrink cementitious microconrete used at water powder ratio of 0.16, having mixed density of 2100 - 2200 kg/m3 and unrestrained expansion of 1 to 4% as per ASTM C827. The microconcrete used shall achieve compressive strength of 50 Mpa at 28 days, Flexural Strength of 5 Mpa at 28, young's modulous of 25 kN/mm2 and shall be "Class A1" fire rating as per EN 1504 Cl 5.5, etc, complete. Product used shall have CE (CE-29842) marking and compliance according to Construction Products Directive 89/106/EEC (CPD) all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Cum Rs. 70000

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Cum Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 95940 / Cum

N.S. 15 Polymer modified Mortar-Patch repair- Providing and applying Renderoc SP40 shrinkage compensated fiber reinforced polymer modified wet spray/manual repair mortar on the prepared surface and curing with curing compound.The repair mortar used shall be single component and shall be mixed with water at water powder ratio of 0.18 and shall have drying shrinkage < 1000 microstrain as per ASTM C 157-93; compressive strength > 40 MPa ; Flexural Strength > 7 Mpa as per ASTM C 348, bond strength > 6 MPa as per ASTM C 1042, etc complete. Product used shall have CE (CE-29842) marking and compliance according to Construction Products Directive 89/106/EEC (CPD) all complete done by authorised applicator of company with 5 years warrenty inclusive of all taxes and royalty as per company specification and direction of E/I.

Basic Rate of The Material Cum Rs. 55000

Add for GST @ 18% Rs.

Add for OH & CP @ 15% Cum Rs.

Add For Labour cess. @ 1 % Rs.

Say Rs. 75381 / Cum

Description Unit Rate Remarks

Add for CP & OH @ 15% sqm Rs.

Add For Labour cess. @ 1 % sqm Rs.

Add for CP & OH @ 15% sqm Rs.

Add For Labour cess. @ 1 % sqm Rs.

Sqm. Rs. 2351.5

Description B H Quantity

MATERIAL ANALYSIS FOR CARRIAGE

Sr No. Item/Particular Quantity Cement in (Bags) Fine Aggregate (in Cum) Coarse Aggregate (in Cum) Bricks (in Nos.)

PART-1 : CONSTRUCTION OF MULTIPURPOSE HALL.

1 B/w in foundation and plinth in C.M(1:4)

2 Flat Brick Soling

3 P.C.C M-150 in Foundation

4 R.C.C in foundation (1:1:2)

5 R.C.C. In beam,slab,columns (1:1:2)

6 12mm cement plaster in C.M(1:6)

7 6mm thick Cement plaster in C.M(1:4)

8 20mm cement plaster in C.M(1:6)

9 Local sand filling in plinth

A Total Quantity of Cement(Bags)

B Total Quantity of sone sand(Cum)

C Total Quantity of Coarse Aggregate 20mm (Cum)

Add 5% for westage

Total nos of bricks

HEAD - 2 :- P.C.C ROAD & PATHWAY WORKS

1 B/w in foundation and plinthin C.M(1:6) 0

2 125mm thick B/w in C.M(1:4) 0

3 Flat Brick Soling

4 P.C.C M-150 in Foundation

5 R.C.C in foundation (1:1:2) 0

6 R.C.C. In beam,slab,columns (1:1:2) 0

7 12mm cement plaster in C.M(1:6) 0

8 6mm thick Cement plaster in C.M(1:4) 0

9 20mm cement plaster in C.M(1:6) 0

10 20mm cement mortar in FlooringC.M(1:4) 0

11 Local sand filling in plinth

A Total Quantity of Cement(Bags)

B Total Quantity of sone sand(Cum)

C Total Quantity of Coarse Aggregate 20mm (Cum)

Add 5% for westage

Total nos of bricks

HEAD - 3 :-FOUNTAIN WORKS

1 B/w in foundation and plinthin C.M(1:6)

2 125mm thick B/w in C.M(1:4) 0

3 Flat Brick Soling

4 P.C.C M-150 in Foundation

5 R.C.C in foundation (1:1:2)

6 R.C.C. In beam,slab,columns (1:1:2) 0

7 12mm cement plaster in C.M(1:6) 0

8 6mm thick Cement plaster in C.M(1:4) 0

9 20mm cement plaster in C.M(1:6) 0

10 20mm cement mortar in FlooringC.M(1:4) 0

11 Local sand filling in plinth

A Total Quantity of Cement(Bags)

B Total Quantity of sone sand(Cum)

C Total Quantity of Coarse Aggregate 20mm (Cum)

Add 5% for westage

Total nos of bricks

CARRIAGE OF MATERIALS

I BRICKS(Per 1000) carriage to 8 km.

Loading and unloading . 648.24

Haulage = Rs. 24.86 per km. x 8 198.88

Carriage per thousand =

II Local Sand carriage to 3 km.

Loading and unloading . 171.1

Haulage = Rs. 13.44 per km. x 3 40.32

Carriage per cum =

III Coarse sand (16 km lead from Hisua )

Loading and unloading . 171.1

Haulage = Rs. 13.44 per km. x 16 215.04

Carriage per cum =

IV Stone Chips (66 km lead from Domchas)

Loading and unloading . 171.1

Haulage = Rs. 13.44 per km. x 66 887.04

Carriage per cum =