SPL REPAIR IN BLDG NO AT-41 AND PROVISION OF RCC BARRAGE ABOVE LOWER DAM AT ARC AND PROVISION OF RAIN WATER HARVESTING POND WITH DREDGING OF EXISTING CHANNEL AND GABIN WALL SUPPORTS AT BAFFLE RANGE OF ARC UNDER GE SHILLONG

Amount

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed.

S&F MS flat iron such as small articles for hold fast and similar work all as specified and directed.

M&L PCC (1:2:4) type B1 (20mm graded Aggregate) for fixing hold fast complete all as specified and directed.

Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165all as specified and as directed

M&L for preparation of new steel surface and applying of two coats of synthetic enamel paint over one coat of red oxide exc 10cm width or girth all as specified and directed by Engr-in-charge.

Supply and fixing MS 100mm size butt hinges cold rolled medium weight, ISI marked complete all as specified and directed.

Supply and fixing 200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

Supply and fixing 150mm size MS pressed handle oval type stove enameled black complete all as specified and directed.

Supply and fixing 250mm long MS sliding door bolt, plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of siz bolt & nuts four on bolt & two on staple,ISI marked, complete all as specified and directed.

Supply and fixing 100mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

Supply and fixing 100mm size MS pressed handle oval type stove enameled black complete all as specified and directed.

S & F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples comlete all as specified and as directed.

M&L for 4mm thick Non asbestos fibre cement building boards of size 600 mm x 600 mm fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling,including dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of unframed work complete all as specified and as directed.

M&L for Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling all as specified complete all as specified and as directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and as directed.

Forming jambs, etc. to openings CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed.

M & for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation.

Taking down GI tubing 15mm dia and connection including removable to store complete all as specified and directed.

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.

Refixing only 15mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

Taking down GI tubing 20mm dia and connection including removable to store complete all as specified and directed.

Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.

Refixing only 20mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Taking down GI tubing 25mm dia and connection including removable to store complete all as specified and directed.

Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete all as specified and directed.

S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair CP single lever wall mixer with provision of over head shower complete with 115 mm long bend pipe connecting legs & wall flange complete all as specified and directed.

S&F in repair CP single lever sink Mixer with swinging spout on upper side (wall mounted model) with connected legs & wall flanges complete all as specified and directed.

S & F in repair 15 mm bore CP fancy type bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore CP fancy type 2 in 1 bib tap long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed.

S&F in repair Powder coated fancy type Anodised aluminium alloy curtain rod 25mm dia including PVC rings @ 100mm c/c with suitable brackets matching to curtain rod of make as as approved by GE complete all as specified and as directed. (Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same)

S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F as in repairs.Vitreous China wash down water down water closet pan (pedestal pattern- P trap), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge

S & F in repairs Vitreous china wash hand basin, white, flat back of size 450 mm x 300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32 mm dia and PVC connection 15mm size 450 mm length with PTMT nuts, complete all as specified and as directed.

Supply and fix in repair 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs to 600 mm long PVC flexible Waste pipe for WHB/urinals/Sink complete all as specified and as directed.

S&F for stainless steel kitchen rack of size 36”x 36”x 10” complete all as specified and directed by Engg-in-charge.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F in repair PVC (SWR) 75mm dia in junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 1000 litres capacity double layer, rotational molded, polythene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling complete all as specified and as directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair for 20mm dia Ball cock valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 complete. Note:- Reinforcement steel will be measured & paid sepratly.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Demolition cement Concrete (RCC chimney/cover slabs) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified and as directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.

M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm th in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed on External surface. Note:- WPC will be measured & Paid separately

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.

M & L for rendering 05 mm thick in CM 1:3 on ceiling surfaces of cement concrete and finished the surface even and smooth without using extra cement complete all as specified & directed .

Supply only for water proofing compound.

M&L for preparation of new plaster external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer,complete all as specified and directed.

M & L for preparation of new plastered/concrete surfaces of walls and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified.

M & L for preparation of new plastered/concrete surfaces of ceiling, applying three coat of white wash on the surfaces of ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from external surface of wall and applying two coats of weather proof paint (Exterior grade) over a coat of alkali resistant primer,complete all as specified and directed

Complete removal existing treatment and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified and as directed.

M&L Precast PCC (1:3:6) type C1 (using 20mm graded agg) solid block masonry exc 10cm in width or girth and setting CM (1:6) including demolition of Precast cement concrete block walling in any position and Including removal of debries out side MoD land complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors or sunken floors and pavings nexc 15 cm thickness (below or above ground level or sunken floors) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection/path incl finishing even & smooth with using extra cement in, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in surface channels and draincomplete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed.

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed.

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed.

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed.

S&F for clip on cabinet hinge(auto close) complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

S & F in repair 12mm thick Block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame complete all as specified and as directed.

S&F 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc 6 sq cm n exc 13 sq cm complete all as specified and as directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F 75mm Brass handles, cast type, polished bright all as specified and directed.

S&F in repairs CP Soap dish holder complete all as specified and directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union CP over head shower of size 125mm of approved make with CP shower arm for wall mounted showers flange complete all as specified and directed.

S&F in repairs corner glass shelf with bracket complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

M&L Glazed ceramic colour tiles of size 350 x 250 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigments cement and pigments and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.

Earth work in ordinary rock, excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

M & L RCC (Nominal Mix) 1:2:4 ( 20mm down graded aggregate) with in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L RCC (Nominal Mix) 1:1.5:3 ( 20mm down graded aggregate) with in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L RCC (Nominal Mix) 1:1.5:3 ( 20mm down graded aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

Use and waste of Formwork to sides of concrete foundation/footings,plinth beam,grade beams, bases etc fair finished surface of concrete complete all as specified and directed.

Use and waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, fair finished surface of concrete complete all as specified and directed.

Removing excavated material exc 250 m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point

Returning, filling in, incl spreading, leveling, watering and well ramming in layers n exc 25 cm as in soft/loose soil complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of white or tinned with cement base paint over priming coat on exterior wall complete all as specified and directed.

M&L for boulders filling/Stacking with approved quarried stone, laid dry Hand packed in GI wire mesh as in wired cages, apron bunds, any thickness) at back of walls over arches etc. and raising (or lowering) to the required level (GI wire mesh shall be measured and paid seperate by here in after) complete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages for lightly packing boulders, lapped, wired and laid in position, including closing after filling and laid in position complete all as specified and directed.

Fixing only chain link fencing including, line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire etc. including dismantling fencing wire mesh, any type complete all as specified.

Supply only chain link fencing any size or type as approved by GE complete all as specified.

S & F MS Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors and gate repair works, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-500D complete all as specified.

M & L for PCC 1:3:6 , Type C2 (40mm gradd stone aggregate) as in fixing of RCC/PCC post or similar type of works etc complete all as specified and directed.

M&L for preparation of new surfaces of steel n. exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Taking down carefully aluminium/copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material and labour for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and fittings of medium grade, including pressed steel / PVC terminal switch boxes fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No.131 above but One 3 pin 5 Amps socket out let points on independent board

All as per item No.131 above but 5 Amp socket on same board with other switches.

All as per item No.131 above but One bell/buzzer point controlled by one pushbutton surface of concrete complete all as specified and directed.

Material and labour for point wiring for power point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVCcasing caping and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Material and labour for point wiring for power point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVCcasing caping and fittings of medium grade, including including pressed steel / PVC terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 4 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

M&L for submain wiring for DBs/ Power Point, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified.

Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

Supply and fixing Bell push, flush type, 5 amp one way complete all as specified.

Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only)

Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.

Supply & fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

Supply & fix wall mounted decorative fittings with warm white LED bulb of 7 Watt including taking down unserviceable one complete all as specified and directed.

Supply and fixing post top lantern LED type 20watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. including taking down unserviceable one complete all as specified and directed.

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable one complete all as directed.

Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.

Supply and fix RCBO 32mA double pole for earth leakage, overload & short- circuit protection and to be housed in DBs complete including necessry connection all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed by Engr-in-Charge.

Taking down serviceable geyser of any size and description and keep in safe custody, refixing same after finishing wiring work complete all as specified and as directed. (Note: In case of damage of geyser during taking down or reinstallation, contractor will be responsible for necessary repair and make geyser in serviceable condition with out any extra payment.)

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

M/S MANOJ KUMAR BAL (BID ID -3481240)

H K Enterprise (BID ID -3480832)