PERIODICAL SERVICES, REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS ETC AND OTHER CERTAIN E/M INSTALLATION AT AF STN DADRI IN AOR OF GE (AF) FARIDABAD (2ND CALL)

Amount

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls complete all as specified and as directed by Engineer-in-Charge.

All as per item No 1 above but on ceilings complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1 mm thick complete all as specified and as directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

M&L for two coat of cement base paint on old decorated plastered surface of wall including complete removal of existing treatment & preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine complete all as specified and as directed by Engineer-in-Charge.

M & L for applying one coat of wall care putty 3mm thick on wall surfaces complete all as specified and as directed by Engineer-in-Charge. MAKE - BIRLA / JK LAXMI OR EQ

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and as directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

All as per item No 10 above but on Wooden surfaces complete all as specified and as directed by Engineer-in-Charge. MAKE - ASIAN / BEGER / NEROLAC

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed by Engineer-in-Charge.

Rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and as directed by Engineer-in-Charge.

Rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed by Engineer-in-Charge. Note:-Integral water proofing compound shall be measured and paid separately

M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and as directed by Engineer-in-Charge.

M & L preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

M & L preparation of new plastered surfaces on ceilings & M & L for applying three coats ofd white wash complete all as specified and as directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling mild steel or wrought iron work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W(Gde-E- 250)quality-A complete all as specified and as directed by Engineer-in-Charge.

S&F Rolled mild steel sections as in roof truss(frames),trussed, purlins,crane gantries,rails and fastening and heavy bracket framing(beam,tee,angle,channel or flat sections) including cleats GDE Fe 410-W(Gde-E-250)quality A complete all as specified and as directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and as directed by Engineer-in-Charge.

S&F, Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. (make:Armstrong or equivalent) complete all as specified and as directed by Engineer-in-Charge.

M&L for 12mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws(make:Armstrong or equivalent) complete all as specified and as directed by Engineer-in-Charge.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CPVC 20 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

M&L dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity complete all as specified and as directed by Engineer-in-Charge.

M&L dismantling water tank of exc 500 and not exc 1000 ltr Capacity complete all as specified and as directed by Engineer-in-Charge.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) pipes single socketed 110mm bore dia, in any length with rubber ring joints, laid in trenches or in floors inclusive fitting, making bell mouth at roof surface complete all as specified and as directed by Engineer-in-Charge. (make:Prince or equivalent)

M&L, rubbing and polishing (mirror polish) to existing old Kota stone slab flooring of any size including cleaning,etc complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.

M & L, Brick work with sub class 'B' bricks , straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.

M & L for servicing of desert cooler of any capacity at existing location by cleaning of all components components with Rinse solution & clean water, greasing of fan, motor including cleaning of water storage tank with treated water after applying the potassium permanganate solution etc without damage any parts incl replacement of small parts like PVC water distributer, flexible pipe, plugs etc as required on site complete all as specified and as directed by Engineer-in-Charge.

M & L for scraping and removing old paint of desert cooler body (steel surfaces) and preparation of steel surfaces including necessary denting, cutting, welding etc for spray painting with approved smoke gray synthetic enameled paint (Ist quality) over a coat of Zinc chromate primer on outer surface and inner surface i.e. Water tank and body fan mounting blades shall be painted with a coat of anticorrosive black paint over a coat of Zinc chromate primer complete for desert cooler of any size and capacity including writing MES No with white paint in size of 40 to 50 mm high letter complete all as specified and as directed by Engineer-in-Charge.

S & F Desert cooler Pump as per existing capacity complete all as specified and as directed by Engineer-in-Charge. Make:- CALAMA, KIRLOSKAR, BEACON, KSB, GRANDFOS,CRI

M & L for replacement of cooling fan motor supporting legs and PVC fan blade of 450 mm sweep for desert cooler complete all as specified and as directed by Engineer-in-Charge. Make:-Bajaj, Shymphony, Khaitan, USHA

M & L for replacement of desert cooler motor of any make with supper enameled copper wire (Thermal class E) of appropriate size make devi dayal/Chetak/Usha including replacement of gun metal bushed and steel shaft complete all as specified and as directed by Engineer-in-Charge.

M & L in replacement of 01 Nos front grill and 3 side loovers suitable for disert cooler duly spray painted with approved paint over a coat of red oxide primer and internal surface of body cooler pump and motor shall be painted with two coat of bituminous paint over a coat of red oxide primer as required on site complete all as specified and as directed by Engineer-in-Charge.

M & L for replacement of desert cooler body 660x660x900mm with front grill and three side louver fabricated out of 22 gauge mild steel plan black sheet / PVC and bottom water tank (sump) of size 660x660x200mm deep fabricated out of 20 gauge milled steel plan black sheet including taking out and reinstallation complete with standard fitting such as PVC pipe for water electric controls and switch, fan speed regulator rewiring of fan motor and water lifting pump including fixing and connecting existing cooler fan and electric pump with 3 core PVC insulated & PVC sheathed cables (min3 mtr in length). External surface shall be spray painted with approved paint over a coat of red oxide primer and internal surface of body cooler pump and motor shall be painted with two coat of bituminous paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make:- SYMPHONY, KHAITAN , KENSTAR

M & L for replacement of running cap 4.0 MFD 440 volt complete all as specified and as directed by Engineer-in-Charge.

M & L for replacement of wood wool pad 25mm thick duly winded with the nylon mesh of standard size for 4000 cum/hr capacity desert coolers complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of Indoor unit & Out door unit of Split type AC of 1.5 tone capacity by taking out the same from existing location , cleaning , dusting, brushing, checking and rectify electrical conections, condenser , cooling coil and other components with cooling coil and other components with cooling coil rinse solution without damage any part and reinstall at the same location and clean water with water pressure gun, greasing of fan , motor , blower etc complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 49 but split type AC of 2.0 ton complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of Window type AC of 1.5 tone capacity by taking out the same from existing location , cleaning of condenser , cooling coil and other components with cooling coil and other components with cooling coil rinse solution and clean water, greasing of fan , motor , blower etc without damage any part and reinstall at the same location complete all as specified and as directed by Engineer-in-Charge.

M&L for finding out the leakage the pressure test of the condenser of cooling coil of window type AC/split AC of 1.5 /2.0 ton and dismantling the same for repair the leakage point by brazing/ soldering including charging the gas R-22 and testing the AC to the entire satisfaction of Engineer-in-Charge

M&L for finding out the leakage the pressure test of the condenser of cooling coil of window type AC/split AC of 1.5 /2.0 ton and dismantling the same for repair the leakage point by brazing/ soldering including charging the green R-410/309 etc or equilvent as required on site and testing for satisfactiory working condition as directed by Engineer-in-Charge

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed. Make :- L&T, ABB, SCHNEIDER, SIEMENS,LEGRAND, HAGER

M&L for Sub main wiring with two single core, 4 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and as directed by Engineer-in-Charge. Make :- L&T, ABB, SCHNEIDER, SIEMENS,LEGRAND, HAGER

M&L in repair for taking out unserviceable sealed unit (compressor) 1.5 ton capacity , single phase, 230 volt of models as existing and replacing the same with new sealed unit (compressor) including necessary modification of the foundation as required to suit the compressor, vacumacation , pressure , testing, leaking, rectification incl gas charging R-22 and testing complete all as specified and as directed by Engineer-in-Charge.

All as per item No 56 above but 2 TR complete all as specified and as directed by Engineer-in-Charge.

All as per item No 56 above but suitable for refrigerent R 410a for 1.5 TR complete all as specified and as directed by Engineer-in-Charge.

All as per item No 56 above but suitable for refrigerent R 410a for 2 TR complete all as specified and as directed by Engineer-in-Charge.

M&L for Split AC outdoor unit body only of capacity 1.5 TR complete all as specified and as directed by Engineer-in-Charge.

M&L for Removing the split type AC 1.5 ton/ 2 ton capacity working on 230 V single phase /440 Volt 3 phase complete including indoor and out door unit including making good of all disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for reinstall at any place ( with in the stn ) at height up to 5 mtr from floor level including replacement of refrigerant tubing upto 7.5 mtrs length and provision of drain pipe and pipe insulation, connecting with existing power socket and testing the unit for smooth functioning including making good of all disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Split AC Indoor unit of capacity 1.5 TR complete all as specified and as directed by Engineer-in-Charge. Make:- VOLTAS, HITACHI,DAIKIN,O-GENERAL CARRIER, Power cool, LLYOD

S & F PCB card suitable of 1.5/2 ton split AC suitable of 1.5/2 ton split AC as required on site including replacement of defective electronic components / IC Circuits complete all as specified and as directed by Engineer-in-Charge.

S & F PCB card suitable of 1.5/2 ton Inverter split AC suitable of 1.5/2 ton split AC as required on site including replacement of defective electronic components / IC Circuits complete all as specified and as directed by Engineer-in-Charge.

S & F Corded remote controller suitable of 1.5/2 ton split AC complete all as specified and as directed by Engineer-in-Charge.

S & F Air filter suitable for 1.5/2 split type AC suitable of 1.5/2 ton split AC as required on site incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge. Make:- MIHIR, DANFOSS,INDFOSS,KLENZOID JOHN FOWLERS

S & F Thermostat suitable of 1.5/2 ton split AC as required on site complete all as specified and as directed by Engineer-in-Charge. Make :- DANFOSS, HONEY WELL,SIEMENS, JOHNSON, RAPIDCOOL

S & F Single pole contractor for Split type AC 50/60 Hz 240 V complete all as specified and as directed by Engineer-in-Charge.

S & F Axilary contactor single phase 220 Volts 10 Amps current capacity complete all as specified and as directed by Engineer-in-Charge.

S & F Start Relay suitable of 1.5/2 ton split AC complete all as specified and as directed by Engineer-in-Charge.

Supply and replace copper condenser coil assembly complete suitable for 1.5 / 2 ton window/ split type AC incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge.

Supply and replace evaporator coil assembly complete suitable for 1.5 / 2 ton Window / Split type AC incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge.

S & F Copper pipe 5 /8" complete with insulation of thickness 10 mm incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge. Make:- DIAMOND, STAR

S & F Copper pipe 3 /8" complete with insulation of thickness 10 mm incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge. Make:- DIAMOND, STAR

S & F Copper pipe 1 /4" complete with insulation of thickness 10 mm incl testing for satisfactry working condition complete all as specified and as directed by Engineer-in-Charge. Make:- DIAMOND, STAR

S&F condensing fan motor of capacity suitable for Split AC 1.5/2 Ton testing on load for the entire satisfaction complete all as specified and as directed by Engineer-in-Charge. Make:- CROMPTOM GREAVES, Khaitan, USHA, Voltas

S&F in replace running capacitor of capacity ‘45+5’ MFD, 240 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

All as per item No 78 above but capacity 36 MFD complete all as specified and as directed by Engineer-in-Charge.

S&F in replace blower fan motor of capacity 1/30 HP, 3 speed, single phase complete all as specified and as directed by Engineer-in-Charge. Make:- CROMPTOM GREAVES, Khaitan, USHA, Voltas

S&F in repair condenser fan motor of capacity 1/20 HP, single phase complete all as specified and as directed by Engineer-in-Charge. Make:- CROMPTOM GREAVES, Khaitan, USHA, Voltas

S&F in repair starting capacitor of capacity 6 MFD, 40 volt, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs starting capacitor of capacity 100-120 MFD , 440 volts, 50 Hz complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs wiring kit for capacity 1.5 ton AC complete all as specified and as directed by Engineer-in-Charge.

S&F in replace of 1/30 HP fan blower motor of cooling unit of split AC unit with supper enameled copper wire of suitable gauge wire including replacement of the shaft and bushes and testing on load for the complete all as specified and as directed by Engineer-in-Charge. Make: CROMPTOM GREAVES, Khaitan, USHA, Voltas

All as per item No 85 above but 1/20 HP condensing fan motor complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MCB 25A, ‘C’ curve type complete all as specified and as directed by Engineer-in-Charge. Make :- L&T, SCHNEIDER, SIEMENS,LEGRAND, HAGER,

S&F in repairs of cable 3 core 4 sqmm FRLS PVC copper conductorcomplete all as specified and as directed by Engineer-in-Charge. Make:- L&T, FINOLEX, RPG, GRANDLAY, HAVELLS, HPL, POLYCAB

M&L for servicing of Refrigerator any size at existing location , cleaning , dusting, brushing, checking and rectify electrical conections, condenser , cooling coil and other components with cooling coil and other components with cooling coil rinse solution without damage any part at the same location complete all as specified and as directed by Engineer-in-Charge.

M & L for replacement of unserviceable sealed compressor with new hermetic sealed compressor of capacity 253 Ltr as existing make including charging of refrigerant gas F-134 and testing on full load complete all as specified and as directed by Engineer-in-Charge.

All as per item No 90 above but capacity of refrigerator 310 Ltr complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of Deep freezer of size 320 Ltr at existing location , cleaning , dusting, brushing, checking and rectify electrical conections, condenser , cooling coil and other components with cooling coil and other components with cooling coil rinse solution without damage any part at the same location complete all as specified and as directed by Engineer-in-Charge.

M & L for replacement of unserviceable sealed compressor with new hermetic sealed compressor of capacity 320 Ltr as existing make including charging of refrigerant gas F-134 and testing on full load complete all as specified and as directed by Engineer-in-Charge.

M & L for servicing of Water cooler of any capacity at existing location by cleaning of condenser, cooling coil, and other components with cooling coil Rinse solution & clean water, greasing of fan, motor including cleaning of storage tank with treated water after applying the potassium permanganate solution etc without damage any parts incl replacement of complete all as specified and as directed by Engineer-in-Charge.

M & L for taking out unserviceable sealed unit (compressor) of water cooler 150/150 Ltrs capacity single phase 230 volt of as existing model and replacing the same with new sealed unit (Compressor ) including necessary modification of the foundation as required to suit the compressor, vacumisation presser testing, leakage rectification, charging of gas R-134 and testing complete all as specified and as directed by Engineer-in-Charge.

All as per item No 95 above but compressor as existing model and replacing the same with new sealed unit (Compressor) for water cooler 80/40 Ltr capacity complete all as specified and as directed by Engineer-in-Charge.

Replacement of wiring kit for water cooler of any make and capacity complete all as specified and as directed by Engineer-in-Charge.

M & L for replacement of condensing fan motor 1/32 HP of water cooler complete all as specified and as directed by Engineer-in-Charge. Make : CROMPTOM GREAVES, Khaitan, USHA, Voltas

All as per item No 98 above but fan motor capacity 1/16 HP complete all as specified and as directed by Engineer-in-Charge. Make : CROMPTOM GREAVES, Khaitan, USHA, Voltas

M&L for replacement of float valve ½ dia suitable for water cooler complete all as specified and as directed by Engineer-in-Charge. Make:- AUDECO, ADVANCE, DEEPAK, ZOLOTO

M&L for servicing, repair of Voltage stabilizer of capacity 4/ 5 KVA cleaning , dusting, brushing, checking and rectify electrical conections, and other components complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs time delay relay suitable for 4/5 KVA voltage stabilizer complete all as specified and as directed by Engineer-in-Charge.

S&F in repirs diode suitable for voltage stabilizer of capacity 4/ 5 KVA complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs condenser suitable for voltage stabilizer of capacity 4/5 KVA complete all as specified and as directed by Engineer-in-Charge.

S&F electronic circuit board with relay suitable for 4/5 KVA voltage stabilizer of any make and testing complete all as specified and as directed by Engineer-in-Charge.

M&L in repair transformer suitable for voltage stablizer 4/5 KVA as required on site complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing,Taking down ceiling fan 56"/48" sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and painting connecting up complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing capacitor, capacity 2.5 mfd in replacement complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing capacitor, capacity 3.15 mfd in replacement complete all as specified and as directed by Engineer-in-Charge.

M&L for rewinding of burnt ceiling fan motor 1200/1400 mm sweep with super enamelled copper winding wire of suitable guage as per details of any make /model complete all as specified and as directed by Engineer-in-Charge.

Supply and replacement of ball bearing of ceiling fan of any size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing and connecting flexible copper twisted twin core of size 23/00076 complete all as specified and as directed by Engineer-in-Charge. Make:- L&T, FINOLEX, RPG, GRANDLAY, HAVELLS, HPL, POLYCAB

M & L Painting of Ceiling fan 48" size complete in size with super enameled synthetic paint by spraying including filling cavities and complete removing of old paint etc complete all as specified and as directed by Engineer-in-Charge.

Supply and replacement of gun metal bush of any type/make/size complete all as specified and as directed by Engineer-in-Charge.

supply and replacement of rubber real complete all as specified and as directed by Engineer-in-Charge.

Supply and replacement of U Clamp complete with nuts, bolts, pins. Heavy duty complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing nuts,bolts, washers and spilt pins for ceiling fan complete all as specified and as directed by Engineer-in-Charge.

Supply and replace spring washers for fan blades complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of wall mounting fan motor 400 mm sweep with super enamelled copper winding wire of suitable guage as per details details of any make /model complete all as specified and as directed by Engineer-in-Charge.

S&F wall mounting fan motor for 400 mm sweep complete all as specified and as directed by Engineer-in-Charge. Make : CROMPTOM GREAVES, Khaitan, USHA, Voltas

S&F wall mounting fan blade for 400 mm sweep complete all as specified and as directed by Engineer-in-Charge.

M&L for servicing of Exhaust fan of any size complete all as specified and as directed by Engineer-in-Charge.

S&F Exhaust fan 10"/12" sweep complete all as specified and as directed by Engineer-in-Charge. Make : CROMPTOM GREAVES, Khaitan, USHA, Voltas

S&F PVC Exhaust fan 300MM sweep complete all as specified and as directed by Engineer-in-Charge. Make : CROMPTOM GREAVES, Khaitan, USHA, Voltas

M&L for Exhaust fan motor for 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

M&L for Exhaust fan blade for 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

M&L for Taking down carefully water heater storage type 25/50 Ltrs capacity for repair and over hauling and opening to gysers and comprising of heating element , thermostate switch, electric connetions cleaning and descaling with descaling solution the geyser tank and checking of leakage on pressure at 150 PSI and testing for smooth fuctioning complete all as specified and as directed by Engineer-in-Charge.

S & F in Replacement of heating element suitable for 2.00 KW Capacity 230 Volts geysers any type as site requirement ISI mark complete all as specified and as directed by Engineer-in-Charge..

All as per item ser No 128 above but 1.50 KW Capacity 230 Volts complete all as specified and as directed by Engineer-in-Charge.

S & F Heating element 3 KW with thermostat for electrical Back up suitable of solar geyser as existing model complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement thermostat switch any type suitable for geyser of any size/model complete all as specified and as directed by Engineer-in-Charge.

S & F Geyser assy ( rupturing plate or U assembly) any make and type for 50 Ltrs capacity water heater incl replacement of rubber seal nuts and bolts complete all as specified and as directed by Engineer-in-Charge.

All as per item no 132 above but for 25Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of indcation lamp (pilit type ISI marked) for 50 / 25 Ltrs water heater complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of PVC insulated flexible copper conductor cable 40/0.0076 size 3 core suitable for 650 volts grade complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of glass wool in any capacity of geyser complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of water storage tank of geyser suitable for 50 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.

All as per item No 137 above but for 25 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.

M & L for repair welding brazing of copper tank upto 25 mm to 10mm long leak proof complete all as specified and as directed by Engineer-in-Charge. (Capacity 25 / 50 Ltrs).

S & F in Replacement of bottom cover suitable cylindrical type geyser as per existing required at site for the following size (a) 50 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.

All as per item No 140 above but for 25 Ltrs Capacity complete all as specified and as directed by Engineer-in-Charge.

MAA BHAWANI CONSTRUCTION

M/s Kanha Enterprise

NAVEEN KUMAR TYAGI

36SHRI RADHEY ASSOCIATES

M/S Yamin