GE(W)HSR-43 of 2019-20 PROVN OF GUARD HOUSE BUILDING AND HARDSTANDING STONE FLOORING FOR A VEH AT HISAR MIL STATION UNDER GE WEST HISAR

Amount

Excavation in trenches n.exc 1.5m wide & n.exc 1.50m in depth for foundation , etc or for shafts, wells, cess pits, manholes, pierholes etc n. exc 10 sqm on plan & getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 Type D2 (40 mm graded stone aggragate) as in fdn, filling and mass concrete complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of ATT emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of ATT emulsion per square metre of surface complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of ATT emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litres of ATT emulsion per metre of the perimeter wall complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Brickwork with fly ash' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia. complete all as specified and directed.

Ditto as per item No 11 above but 6 to 8mm dia -ditto-.

Ditto as per item No 11 above but for 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.6 to 8mm dia -ditto-.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter with rough finish flat surface complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions, etc finish with rough finish flat surface complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges finish with rough finish flat surface complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded stone aggregate as in Chajjas complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for rendering 12mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC as per manufacturer's instruction finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L for rendering 5mm thick plaster on concrete surfaces in CM (1:3) including finish even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coats of cement base paint of any tint over a coat of cement primer including complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coats of oil bond distemper over of any tint over one coat 1.5mm minimum thick wall care putty including complete all as specified and directed.

M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for 50mm thick, cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in plinth protection, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. .

M&L for first quality non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured to match over and including screed bed or bedding layer 20mm thick cement mortar 1:6 complete all as specified and directed.

M&L for first quality Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including rendering or backing layer 10mm thick in cement mortar 1:4 complete all as specified and directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F CP angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 15mm bore pipe complete all as specified and directed.

S&F CP stop valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 15mm bore pipe complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 20mm bore pipe complete all as specified and directed.

S&F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.

S&F Bib taps fancy type cromium plated long body cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body,15 mm complete all as specified and directed.

S&F cromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union , 125mm size complete all as specified and directed.

S&F Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests including P or S trap (excluding flushing cistern ), complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets of capacity 10 ltr complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete all as specified and directed.

S&F tubular towel rail 20mm dia, D type, 60cm long between flanges,brass CP complete all as specified and directed.

S&F PVC (SWR) 75mm floor trap with CP grating including jointing with solvent cement complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed100mm complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150mm complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes complete all as specified and directed.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 75 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls dia of pipe 110 mm complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

M&L for preparing new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparing new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over existing primer surface complete all as specified and directed.

M&L for Salt-glazed stoneware gully traps, square or round mouthed, type `P' size 150mmx150 mm complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top multilayer ISI marked) hoisted and fixed in position all as specified in SSR Part I Cap 1000 Liter complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed dia of pipe 20mm complete all as specified and directed.

S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden / platic cleats (minimum weight 300gms) complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/platic cleats (Minimum weight 105gms) complete all as specified and directed.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls,complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including box type hinges with steel handle etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. . Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.

S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in filling of Chowkhats etc complete all as specified and directed.

S&F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed.

S&F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazingwith oil puttyin square n.exc 0.50 sqm in each pane complete all as specified and directed.

M&L for preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25 mm thick size of slab 450x450 mm over and incl 15 mm thick cement screed base laid CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota Stone Slab 20-25 mm thick in riser of steps , skirting , dado and pillar laid over and incl 10 mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Precast RCC cover 300 mmx300 mm, 50mm thick in cement concrete 1:2:4 type B-1 (using 20mm graded Stone Aggregate) complete all as specified and directed.

M&L for concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8)

S&F slat-glazed stoneware drain pipes laid in trenches and jointed as specfified dia of pipe 150 mm complete all as specified and directed.

M&L for PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded stone agg in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in coping including necessary formwork complete all as specified and directed.

M&L for water proofing treatment to roof surfaces by applying with one coat of cold applied bituminous primer @ 0.40 ltr/Sqm conforming to IS-33894 over and incl screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 with WPC on roof surfaces and laying APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5kg/sqm, reinforced with polyester non woven fabric (weighing not less than 150gms/sqm). It shall be laid by torch application. Side over laps shall be 75mm and the end lap shall be 100mm and all over laps and joints shall be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet groove complete all as specified and directed.

M&L for cement concrete tiles 20cm x 20cmx 20mm thick, machine pressed cut and polished with grey cement and no pigment in; set jointed and pointed and neat cement slurry in roof treatment over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Supplying only Integral waterproofing compound complete all as specified and directed.

Excavation over areas n.exc 1.5m deep and geeting out in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance exceeding 250 mtrs and not exceeding 500 mtrs and depositing where directed at level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at level not exceeding 1.5 mtrs above the starting point complete all as specified and directed.

Rolling and consolidation to required gradient and camber of formation surface (in cutting) of roads with 8 to 12 Tonne power roller including filling in depressions which occur during rolling complete all as specified and directed.

M&L for 250mm thick (spread thickness) soling (or sub base) (in two layers of 125mm spread thickness and each layers to be rolled and consolidated seperately) with broken boulders or quarried stone interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L for 100mm thick PCC M-20 (design mix) using 20 mm graded stone aggregate as in floors/sub floors laid over stone soling incl necessary formwork complete all as specified and directed.

M&L for Stone set flooring with deep dressed hard granite/trap/basalt stone setts of size 200 to 250 mm long, 150 to 200 mm wide and 150 mm deep and side dressed bedded in 20 mm thick cement morater 1: 3 joint s grouted in cemnet moarter 1:2 with an admixture of metalic floor hardner 5% by weight of cement and stuck flush complete all as specified and directed. NOTE:- Metallic hardner shall be measured and paid separately.

M&L for Edge stone to flooring with deep dressed hard granite/trap/basalt storne setts sof size 250 to 300 mm long by 150 to 200 mm wide and 450 mm deep and side dressed beeded in 20mm thick, cement mortar 1:3 joints grouted in cement mortar 1:2 with an admixture of metalic floor hardner, 5% by weight of cement and stuck flush complete all as specified and directed. NOTE:- Metallic hardner shall be measured and paid separately.

Supply only metalic floor hardner of approved make as directed.

M&L for point wiring for one light / bell / Ceiling fan/Exhaust Fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through rigid PVC coduit 20 mm dia medium grade and conduit accessories concealed type in walls/ceilings including steel terminal sunken boxes with 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for mounting switches, sockets and regulators including cutting chasing on wall and other surface and making good surface complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No. 107 above but for one 5 pin 5 Amp socket outlet on independent board controlled by one number one way switch on independent board.

All as per item No.107 above but for one 5 Pin 5 Amp socket outlet on the same board controlled by one number one way switch on same board.

All as per srl item No. 107 above but for 15 Amp socket outlet by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed. (Note:- Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC conduit will be measured as one length).

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230/240 Volts grade complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15/16 Amp, 230/240 Volts grade complete all as specified and directed.

S&F flush type socket outlet multipurpose 2&3 Pin, 5/6 Amp 230 volts AC complete all as specified and directed.

S&F flush type socket outlet 2 in 1 multipurpose 3 Pin 5/16 Amp 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite, 3 terminals with back plate etc complete all as specified and directed.

S&F Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F LED tube light fitting 18W metallic frame /batten, Retro, Box type surface and wall mounted, including LED tube light rod , high efficiency including making connection, complete all as specified and directed.

S&F MCB SPN, 32 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.

S&F ceiling fan complete with down rod , blades and accessories 230 V,1200 mm sweep, BEE 5 star rated and making connection complete all as specified and directed.

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweet heavy duty with louver complete including grouting with bolts nuts and making connection complete all as specified and directed.

S&F Lamp holder of PVC / Polycarbonate type surface with 9 watt LED bulb complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN, 8 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs with min 200 Amp rating copper bus bar, complete all as specified & directed.

S&F Geyser storage type of SS tank, 25 ltr capacity electric operated complete in plastic body including grouting bolts nuts and making connection complete all as specified and directed.

Supplying, laying, jointing and testing GI tubing medium grade with all fitting 20 mm bore fixed to wall or laid in trenches complete all as specified and directed.

Supplying, laying, jointing and testing GI tubing medium grade with all fitting 25 mm bore fixed to wall or laid in trenches complete all as specified and directed.

Supplying, laying, jointing and testing GI tubing medium grade with all fitting 40 mm bore fixed to wall or laid in trenches complete all as specified and directed.

M&L for cutting of existing CI/GI pipe line of 100mm bore for insertion of tee and tail piece and jointing materials complete all as specified and directed.

S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 40mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed 8cm thick below cable and 15 Cm thick after laid thincluding gently punning around cables complete all as specified and directed Note : 18cm punned thickness shall be measured and paid

M&L for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

M&L for 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

Supplying laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade of size 16 sqmm 2 core complete all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc . Eexcavation, earhtwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely)

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290(Gde E-165) complete all as specified and directed.

M/S Punia Constructions

m/s krishna engineers1

B B BUILDERS

SITA RAM AND SONS

M/S KAVITA CONSTRUCTION