Loading
Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹4.6 L
Closing Date
31 Jul 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
OA/1
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce- i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: Financial Eligibility Criteria: Advance Correction Slip No. 1) Ref: 2022/ce-i/ct/gcc-2022/policy dated- 14.07.2022) A. Para 10.2., Part I of GCC shall be read as under: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover under: The tenderers shall submit requisite information as per Annexure-XIV (as per tender document & NIT), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work: Any Civil Engineering works.
16 conditions · 5 needing a document upload
A . Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1. The details of the works completed by the tenderer during the last Seven years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4. Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6. List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7. List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8. NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII. 9.Format for Certificate to be uploaded by Tenderer Along with the tender documents Annexure-IX and IX-A (As per GCC-2022 Annexure-V and V-A). 10. GST COMPLAINT INVOICE Annexure-X 11. LETTER OF CREDIT Annexure-XI, 12. Bid Capacity Declaration Annexure-XII.13. Bid Security declaration Annexure-XIII and 14. Annual Contractual Turnover Data Declaration Annexure-XIV (As per GCC-2022 Annexure-VI-B).
B . T h e tender offer complete in a l l respect and with all documents is t o b e submitted online by e-tendering process through the website www.ireps.gov.in before the closing time/date of this tender as mentioned in the NIT (Notice Inviting Tender). Tenderer can revise the bids any number of times till the closing time/date of the tender. No manual offers shall be accepted.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Construction of retiring room along with other ancillary works at TAK station under jurisdiction of AEN/LLH
170_2026-27
170_2026-27
Open
Works - General
6 Months
Howrah, West Bengal
₹0
₹4.6 L
31 Jul 2026
7 Jul 2026
17 Jul 2026
268 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 19,99,409.61 | ||
| — | 75.00 | — | — | ||
| Providing and applying Melamine Polish on veneer surface and wooden surface. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge | — | — | — | 96,612.75 | |
| — | 65.00 | — | — | ||
| Providing and fixing in position Roller, horizontal, vertical blinds. With imported fittings heavy duty powder coated of approved colour including aluminium top channels, chord, locks, painted Tilt rod etc. completed. item design select by Atrchtect and Engineer-in-charge also work approved by Architect and Engineer in Charge. The work shall be measured base on area of elevation. The rate to include all materials, labour, transport, etc complete. The work shall be measured base on area of all elevation. Rates to include all materials, labour, transport, , delivered, completion finish of work in all respect and placed in position at site of work approved by Architect and Engineer in Charge | — | — | — | 1,38,104.85 | |
| — | 80.00 | — | — | ||
| Providing and fixing of frameless glass partition wall with or Without door glazing consisting of 12 mm clear toughened glass ( Saint gobain/ Modi or Equivalent make) and fixing with Dorma/Ozone/ Archies make with all necessary fittings upto all height including scaffolding all complete as per the direction of Atrchtect and Engineer-incharge also The work shall be measured base on area of front elevation. The work shall be measured base on area of front elevation. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (The materials/ products to be used in the instant item should have GreenPro Certification and qualifies as green product those are available in the directory of GreenPro certified product, materials and tecnologies issued by CII and to be approved by Engineer in charge) | — | — | — | 7,75,134.4 | |
| — | 45.00 | — | — | ||
| Supply , fitting and fixing 3 mm veneer of approved brand and colour . The work shall be measured base on area . The rate to include all materials, labour, transport, delivered and placed in position at site work approved by Architect and Engineer in Charge. The work shall be measured base on area. Rates include all materials, labor, transportation, delivery, completion finish of work in all respect and placement at site. Works approved by Architects and Engineers In charge. (Veneer - Green, century , Natural or Equivalent Make). | — | — | — | 88,706.25 | |
| — | 8.00 | — | — | ||
| Providing and finishing coloured Vitreous wash basin of size 550 x 450mm along with recessed at the back for reception of Pipes & Fittings of brand "Cera" or any other similar approved brand. | — | — | — | 72,825.04 | |
| — | 15.00 | — | — | ||
| Providing and fixing coloured single piece european type water closet with built in low level flushing cistern complete in all respect of approved brand . | — | — | — | 2,61,772.65 | |
| — | 8.00 | — | — | ||
| P+F+F 3 in 1 wall mixture top of approved brand and complete in all respect . | — | — | — | 43,657.92 | |
| — | 8.00 | — | — | ||
| Supplying, fitting and fixing telephonic shower of cp brass with flexible tube 1.5 mm long including c.p COCK | — | — | — | 37,155.6 | |
| — | 15.00 | — | — | ||
| Supplying and fixing c.p. commode shower complete with all fitting | — | — | — | 17,416.65 | |
| — | 8.00 | — | — | ||
| Providing and fixing cp swireling shower 15mm nominal size. | — | — | — | 13,933.44 | |
| — | 6.00 | — | — | ||
| Supplying and fixing cp towel rail (450mm long ) | — | — | — | 5,755.86 | |
| — | 6.00 | — | — | ||
| Supplying and fixing c.p. towel ring (150mm) | — | — | — | 3,224.76 | |
| — | 18.00 | — | — | ||
| Supplying and fixing cp extension nipple 15 mm dia of approved brand | — | — | — | 2,506.86 | |
| — | 150.00 | — | — | ||
| Supplying, fitting and fixing 6mm thick water proof commercial ply of approved brand for wall cabinet furniture with proper size &shape as per direction of engineer at site .The rate includes the cost of all lead, lift ,labour, materials , such as ply wood, screw nails adhesive etc as required to complete the work in all respect . | — | — | — | 2,17,575 | |
| — | 80.00 | — | — | ||
| Supplying, fitting and fixing 18 mm th water proof commercial ply of approved brand for wall cabinet/furniture with proper size&shape.as per direction of engineer at site . The rate includes the cost of all lead ,lift labour,materials such as plywood, screw, nails,adhesive etc as required to complete the work in all respect . | — | — | — | 1,71,592.8 | |
| — | 12.00 | — | — | ||
| P+F ss decorative handle of 150mm long with necessary screw etc complete in all respect as per direction of engineer at site. | — | — | — | 1,615.32 | |
| — | 18.00 | — | — | ||
| Providing and fixing ss decorative handle of size 250 mm long with necessary screw etc complete in all respect as per direction of engineer at site. | — | — | — | 3,726.54 | |
| — | 6.00 | — | — | ||
| Providing and fixing rectangular / square shape mirror of any size (not less than 0.6sqm) over 6 mm th water proof commercial ply with necessary ss screw complete in all respect as per direction of engineer at site . | — | — | — | 16,896.84 | |
| — | 16.00 | — | — | ||
| Providing, fitting and fixing drawer/wall cabinet lock godrej make or similar brand complete in all respect as per direction of engineer at site | — | — | — | 4,842.56 | |
| — | 24.00 | — | — | ||
| Providing and fixing SS Hydraulic hinges to cabinet with necessary screw etc to complete in all respect as per direction of engineer at site | — | — | — | 7,468.32 | |
| — | 10.00 | — | — | ||
| Providing and fixing drawer channel 500 mm long with necessary screw,nails etc. complte in all respect as per direction in engineer at site | — | — | — | 5,288 | |
| — | 60.00 | — | — | ||
| Supplying, fitting & fixing as curtain rod 20mm ,1mm thick with cp bracket complete in all respect as per direction in engineer at site | — | — | — | 13,597.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Updatedtenderdocument_151.pdf
ATTACHMENT
GCCACS14.07.2022-compressed.pdf
ATTACHMENT
CheckList_3.pdf
ATTACHMENT
JPOSTCables_1.pdf
ATTACHMENT
Annexure-X2.pdf
ATTACHMENT
NewAnnexure-IX-merged.pdf
ATTACHMENT
Annexure-XII_.pdf
ATTACHMENT
ColouredFinal_GCC_April-22_pdf_27.04.22_1.pdf
ATTACHMENT
Annexure-XI_11_2.pdf
ATTACHMENT
Annexure-XIV_1.pdf
ATTACHMENT
Annexure-IIIIII_3.pdf
ATTACHMENT
ACS11GCCWorks2026.pdf
ATTACHMENT
Annexure-IVVVIVIIVIII_2.pdf
ATTACHMENT
Annexure-XIII_1.pdf
ATTACHMENT
Spl.condition.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .