Execution of rock fall protection & slope stabilization works in cuttings between Bari Sadri & Chhoti Sadri stations, in connection with Bari Sadri-Nimach new BG line project in Ajmer division of North Western Railway.

Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

(a)The tenderer must have successfully completed/ substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annex. IV-A or IV-B or IV-C. Note :- Criteria for the completed work/Substantially completed has been given in the General instructions in the tender document.

Definition of Similar work- Any completed/ substantially completed work in which following defined minimum quantities of critically essential items of rockfall protection & slope stabilization of railway formation have been executed: 1. Providing and fixing minimum 7000 Sqm of hexagonal grid/mesh of high strength steel wire with class A zinc alloy coat and dia 2.7 mm, longitudinally weaved with steel cable grade 1770 Mpa, having a dia of 8 mm (specification as per IRC SR 23) meeting the following minimum requirement: Longitudinal tensile strength: 170 KN/m, puncture resistance:140 KN with maximum displacement of 450mm. 2. Providing and fixing minimum 7000 Sqm of Reinforced Geo- composite made of Polypropylene Polymer extruded on to a steel wire grid/mesh. 3. Supply and installation of minimum 14000 RM of Self Drilling Anchors (32mm dia., yield load>230kN) with attached sacrificial drill bit. 4. Providing and fixing minimum 3000 RM of continuously threaded bars of 32 mm dia., yield load more than 400 kN, nut, with washer plates, couplers for connecting bars, with suitable corrosion protection coating and full-length grouting with admixture. 5. In case a completed/ substantially completed work fulfils above requirement and is considered similar in nature for fulfillment of technical credentials, the overall cost of substantially completed work including the PVC amount (if paid), shall be considered.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)

In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).

Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period.

The initial e-Reverse Auction ( e-RA) period as mentioned in the Clause no. 26.1 (b), Annexure C, Para 2 of the "GENERAL INSTRUCTIONS" of Tender Document will be as per railway board guidelines or as approved by Tender accepting authority . (Applicable to the works and service tenders of value more than Rs. 50 crore.)

The auto extension period as mentioned in the Clause no. 26.1(b), Annexure C, Para 2 of the "GENERAL INSTRUCTIONS" of Tender Document will be as per railway board guidelines or as approved by Tender accepting authority .(Applicable to the works and service tenders of value more than Rs. 50 crore.)

The Minimum Increment as mentioed in the Clause no. 26.1 (b), Annexure C, Para 2 of the "GENERAL INSTRUCTIONS" of Tender Document will be as per railway board guidelines or as approved by Tender accepting authority . (Applicable to the works and service tenders of value more than Rs.50 crore.)