Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.6 LAccepted-AOC 16A 1 EARLE STREET FLAT N 1 FIRST FLOOR KOLKATA 700026 | KOLKATA | WEST BENGAL | 700026 | ₹41.6 L Quoted ₹39.1 L | 1 | Accepted-AOC Work order issued |
| 2 | 2₹53.9 LRejected-Finance 201 PLOT NO 32 SHALAKA BLDG TPS II JUHU ROAD SANTACRUZ WEST MUMBAI SUBURBAN MAHARASHTRA 400054 | MUMBAI SUBURBAN | MAHARASHTRA | 400054 | ₹53.9 L | 2 | Rejected-Finance As per NIT conditions. |
| 3 | 3₹59.0 LRejected-Finance 6 NEW SADGURU NANIK INDUSTRIAL ESTATE OFF WESTERN EXPRESS HIGHWAY GOREGAON E MUMBAI 400063 INDIA | MUMBAI SUBURBAN | MAHARASHTRA | 400063 | ₹59.0 L | 3 | Rejected-Finance As per NIT conditions. |
| 4 | 4₹73.5 LRejected-Finance M9 AMBAD MIDC NASHIK MAHARASHTRA INDIA 422010 | NASHIK | NASHIK | MAHARASHTRA | 422010 | ₹73.5 L | 4 | Rejected-Finance As per NIT conditions. |
| Sl No | Description | Qty | Unit | GANNON DUNKERLEY AND CO LTD L1 | PREMIER ENGINEERING TECHNICS PVT. LTD. L3 | Fox Solutions Private Limited L4 | DElite System Engineering (India) Pvt. Ltd. L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | FRICTION DRIVE TYPE ARRIVAL SLAT CONVEYOR:
Design, supply, installation, testing & commissioning of heavy duty Endless Slat Type Flat Arrival Baggage Conveyor System having nominal useful width of 950mm, having rubber slats black in colour with smooth top of PVC / PU / Rubber not less than 5 mm thickness, antistatic, flame retardant, height 450mm from finished floor level and speed of 24-30 mtrs / min. The carousel shallhave die-cast aluminimura chain block friction type suitable capacity drive unit complete with overlapping slats finished chain track unit frame work tension adjustment device stainless steel side covering (inner & outer) in the passenger area as well as in the non- passenger area, toe-kick plate at inner & outer sides, infill, rubber slat of suitable dimensions with MS slat support having live loading capacity of 35 kgs per linear meter and all other accessories including cutting and drilling of holes, equipment grouting, earthing, necessary wiring, connection / interconnection etc. as required for successful commissioning of baggage conveyor system complete as required as per the direction of Engineer-in- charge. | 28 | Mtrs | 55,000 ₹15,40,000 Lowest | 72,000 ₹20,16,000 | 78,571.43 ₹22,00,000.04 | 60,000 ₹16,80,000 |
| 2.00 | Control panel for Arrival conveyor system
Design, supply installation, testing and commissioning of cubical type indoor floor mounting coinpartmentlised, fabricated out of CRCA sheet steel of thickness 2mm duly powder coated indoor type floor mounted with locking arrangement. The panel (IP42protection) shall be front ope neoprene rubber, gasket, door, interlock feature with incoming power supply suitable forn able & accessible All door shall be provided with high quality operation on for 15 volts, 3 Phase, 50 Hz AC supply I/'c. i/c. earthing, connections and comprising of the including component as required for departure conveyor system. Layout drawing shall be got approved by the contractor and approval obtained from the Engineer*in-charge before taking up fabrication work.
Incoming Control Unit:-
415 Volts 4 pole MCCB (micro processor type) of breaking capacity of 35KA (Ics= 100 Icu) with over load, short circuit protection & earth fault protection. The rating of the MCCB shall be 50 selected that only about 80% of its full current carrying capacity is utilized for meeting the requirement of the specific application including future load of expansion of four more check in counters.
Incoming Protection:- i) Single Phase Protection ii) Phase reversal protection iii) Under voltage protection
Status Indication / display:- Indication lamps (LED type) in different colour for Three phases & power ON with protection MCB.
Meters (Incoming):- a) Digital type Ammeter of Required range with selector switch & Current Transformers, (b) Digital type Voltmeter with selector switch and protection MCB
MOV & switch:- Necessary Surge protection System (block 70KA minimum with Neutral protection) shall be provided at control panel of conveyor with incomer switch.
Outgoing for each.section:- MPCB of suitable current rating & breaking capacity of 10 KA for each motor.
Outgoing for rolling shutter :- 1) 2 Pole MPCB of 10 KA & suitable current rating for each shutter motor. 2) Interloacking with conveyor & limit switches / sensors. 3) Auto-manual switches, separate push button for UP /DOWN movement of rolling shutters etc.
Emergency stop :- Provision shall be made in panel & at three other locations of conveyor in the passenger baggage claim area | 1 | Job | 2,50,000 ₹2,50,000 Lowest | 2,65,000 ₹2,65,000 | 8,00,000 ₹8,00,000 | 2,90,000 ₹2,90,000 |
| 3.00 | ROLLING SHUTTER:
SITC of electrically operated Rolling Shutter with arrangement for auto and manual operation to suit to the opening in wall fabricated from MS, provided with suitable rated tubular geared single phase motor directly coupled to the shaft of the shutter, limit switch or sensor interlock with conveyor starter, complete with guide channels wiring, earthing, painting etc. as required for the successful operation of the shutter for minimum opening size 1.5 mtr. (L) X 1.35 mtr. (W). complete as required as per site conditions.
Arrival - 02 No
Departure - 1 No | 3 | Nos. | 70,000 ₹2,10,000 | 1,65,000 ₹4,95,000 | 68,182 ₹2,04,546 | 60,000 ₹1,80,000 Lowest |
| 4.00 | DRAUGHT CURTAIN:
Supply & Installation of Draught Curtain cover for the opening of conveyer belt, of suitable size fabricated with 3mm thick Nylon Rubber flaps, to be fixed by SS flat strip as per size of shutter opening etc. the opening size shall be as per dimensions/ drawings approved by Engg.-in-charge, complete as required as per site conditions.
Arrival - 02 No
Departure - 1 No | 3 | Nos. | 15,000 ₹45,000 | 9,000 ₹27,000 | 6,545 ₹19,635 | 5,600 ₹16,800 Lowest |
| 5.00 | Weighing Scale Conveyor.
Integrated Weighing Scale Conveyor: Design, supply, installation, testing & commissioning of following size heavy duty slider bed belt weighing scale conveyor equipped with illuminated push butter for introduction of baggage into dispatch conveyor (after baggage had been weighed & tagg-s complete with LCD/LED dual display type weighing scale with 4 nos. high resolutions load cells each of suitable capacity, Accuracy class C3 to C6 with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth / rough top, flame retardant, antistatic, sobust, flexible, capable of providing continuous service, and of very low friction type belt having useful width 650mm (minimum) and overall frame size 825 mm (maximum), height'as per system design of OEM and functional requirment at passenger end and the other end suitably sloped for easy flow of baggage with speed as per system design of OEM and functional lequirment. The bed shall be made of 3 mm thick (minimum) galvanized or epoxy coated mild steel sheet. weighing scale, drive pulley, tension adjustment, frame and supports, Trim / fascia covering / finishing, head and tail pulley, return / snub rollers, side wall / Guard with control logic and protection as per technical specifications for baggage handling system including all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment grouting, earthing, etc., complete as required for successful operation of the system, (a) Length 1200 mm (Nominal) | 2 | Each | 1,30,000 ₹2,60,000 Lowest | 2,35,000 ₹4,70,000 | 3,05,000 ₹6,10,000 | 1,90,000 ₹3,80,000 |
| 6.00 | Feeding Inject Conveyor:
Design, supply, installation, testing & commissioning of following sizé heavy duty slider bed belt dispatch conveyor complete with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth top, flame retardant, antistatic, robust flexible, capable of providing continuous service, and of very low friction type belt (Diamond cut Belt of 7.5 mm thickness ia also acceptable), normal live load 35 kg per linear meter having useful belt width such that it fits within the frame, without much side play and shall match with that of integrated weighing conveyor and overall frame size matching with integrated weighing conveyor, height as per system design of OEM and functional requirment suitably sloped for easy transfer of baggage from one section to adjoining section with speed as per system design of OEM and functional requirment. The bed shall be made of 3 mm thick (minimum) galvanized 5 epoxy coated mild steel, drive pulley, tension adjustment, frame and suppor's, Trim / fascia covering / finishing, head and tail pulley, return rollers, side wall / Guard; Vertical baggage guide / tipping device with control logic as per technical specifications for baggage handling system including all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment grouting, earthing, etc., complete as required for successful operation of the system, (a) Length 1200 mm (Nominal) | 2 | Each | 95,000 ₹1,90,000 Lowest | 1,80,000 ₹3,60,000 | 2,65,000 ₹5,30,000 | 1,35,000 ₹2,70,000 |
| 7.00 | Collector and Take Away conveyor system:
Design, Supply, Installation, testing and commissioning of heavy duty slider bed belt type take away conveyor system having useful belt width 950 mm and frame size 1050 mm and height 400 mm from finished floor level, Normal live load 35 KG per linear Mtr., speed of 21-25 mtr. per min. / as per system functional requirement complete with 2 ply, 3 mm aluminium thickness polyster black colur carcass PVC smooth top, flae retardant, antistatic, robust, flexible, capable of providing continuous service, and of very low friction type belt. The bed shall be made of 3 mm thick (minimum) gavanized mild steel sheet, drive unit, tension adjustment, frame and supports and cross members, support spacing, Trim / fascia covering / finishing, drive pulley, head and tail pulley and snub rollers, return rollers, vericle baggage guide / tipping device side wall / Guard with control logic and protection as per Technical spifications for baggage handling sytem includingall electrical switchgears component, cabling, connection / interconnection, controls, cutting & drilling of holes, equipment grouting, earthing etc., complete as required for successful operation of the system in the departure check-in area.
Collector conveyor - 7.5 mtrs.
Transport conveyor of 7.5 mtrs | 14 | Mtrs | 40,000 ₹5,60,000 Lowest | 45,000 ₹6,30,000 | 80,000 ₹11,20,000 | 63,000 ₹8,82,000 |
| 8.00 | Gravity roller conveyor
Design, Supply, installation, testing & commissioning of following section length having gravity rollers of length 950 mim (approx.), roller capacity 35kg per linear meter, 60/65 mm pitch/ día or as per manufacture's recommendation, width section 1000 mm and height suitably matched and sloped, complete in all respects i/c conveyor frame section, rollers, supports as per technical specifications for baggage handling system including cutting & drilling of holes, equipment grouting etc. as required after dismantling the existing gravity roller and stacking the dismantled old material in the store, (a) Section Length 2000 mm | 1 | Each | 60,000 ₹60,000 | 54,000 ₹54,000 Lowest | 1,50,000 ₹1,50,000 | 65,000 ₹65,000 |
| 9.00 | Control panel for departure conveyor system
Design, supply installation, testing and commissioning of cubical type indoor floor mounting coinpartmentlised, fabricated out of CRCA sheet steel of thickness 2mm duly powder coated indoor type floor mounted with locking arrangement. The panel (IP42protection) shall be front ope neoprene rubber, gasket, door, interlock feature with incoming power supply suitable forn able & accessible All door shall be provided with high quality operation on for 15 volts, 3 Phase, 50 Hz AC supply I/'c. i/c. earthing, connections and comprising of the including component as required for departure conveyor system.
Layout drawing shall be got approved by the contractor and approval obtained from the Engineer*in-charge before taking up fabrication work.
Incoming Control Unit:-
415 Volts 4 pole MCCB (micro processor type) of breaking capacity of 35KA (Ics= 100 Icu) with over load, short circuit protection & earth fault protection. The rating of the MCCB shall be 50 selected that only about 80% of its full current carrying capacity is utilized for meeting the requirement of the specific application including future load of expansion of four more check in counters.
Incoming Protection:- i) Single Phase Protection ii) Phase reversal protection iii) Under voltage protection
Status Indication / display:- Indication lamps (LED type) in different colour for Three phases & power ON with protection MCB.
Meters (Incoming):- a) Digital type Ammeter of Required range with selector switch & Current Transformers, (b) Digital type Voltmeter with selector switch and protection MCB
MOV & switch:- Necessary Surge protection System (block 70KA minimum with Neutral protection) shall be provided at control panel of conveyor with incomer switch.
Outgoing for each.section:- MPCB of suitable current rating & breaking capacity of 10 KA for each motor.
Outgoing for rolling shutter :- 1) 2 Pole MPCB of 10 KA & suitable current rating for each shutter motor. 2) Interloacking with conveyor & limit switches / sensors. 3) Auto-manual switches, separate push button for UP /DOWN movement of rolling shutters etc. | 1 | Job | 3,00,000 ₹3,00,000 Lowest | 4,00,000 ₹4,00,000 | 11,75,000 ₹11,75,000 | 4,78,000 ₹4,78,000 |
| 10.00All inclusive Comprehensive Maintenance Contract (AICMC): After 02 years DLP All Inclusive Comprehensive Maintenance of Complete Baggage Handling System as provided under SUB HEAD I DSITC OF PASSAANGER BAGGAGE HANDLING SYSTEM including all spares, consumables, manpower etc. including trouble shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of Engineer-in-Charge and as per special conditions specified for manintaning the above system in acceptable functional, operational, serviceable conditions. The response time in case of breakdown shall not be more than 08 hours. | |||||||
Tender Value
₹72.5 L
EMD Value
₹1.1 L
Closing Date
29 Dec 2025, 4:00 pmClosed
Manager Engg Elect AAI Solapur Airport
Manager Engg Elect AAI Solapur Airport
Devlopment of Solapur Airport SH Provision of Baggage Handaling System at AAI Solapur Airport
2025_AAI_258224_1
AAI/Solapur/MGE EE/BHS/2025-26
Open Tender
Electrical Works
Item Rate
150 days
AAI Solapur AIiport
20 documents required · 20 mandatory
₹1,180
₹1.1 L
29 Jul 2026
9 Dec 2025
30 Dec 2025
9 Dec 2025
29 Dec 2025
9 Dec 2025
9 Dec 2025 - 11 Dec 2025
FRICTION DRIVE TYPE ARRIVAL SLAT CONVEYOR: Design, supply, installation, testing & commissioning of heavy duty Endless Slat Type Flat Arrival Baggage Conveyor System having nominal useful width of 950mm, having rubber slats black in colour with smooth top of PVC / PU / Rubber not less than 5 mm thickness, antistatic, flame retardant, height 450mm from finished floor level and speed of 24-30 mtrs / min. The carousel shallhave die-cast aluminimura chain block friction type suitable capacity drive unit complete with overlapping slats finished chain track unit frame work tension adjustment device stainless steel side covering (inner & outer) in the passenger area as well as in the non- passenger area, toe-kick plate at inner & outer sides, infill, rubber slat of suitable dimensions with MS slat support having live loading capacity of 35 kgs per linear meter and all other accessories including cutting and drilling of holes, equipment grouting, earthing, necessary wiring, connection / interconnection etc. as required for successful commissioning of baggage conveyor system complete as required as per the direction of Engineer-in- charge.
ROLLING SHUTTER: SITC of electrically operated Rolling Shutter with arrangement for auto and manual operation to suit to the opening in wall fabricated from MS, provided with suitable rated tubular geared single phase motor directly coupled to the shaft of the shutter, limit switch or sensor interlock with conveyor starter, complete with guide channels wiring, earthing, painting etc. as required for the successful operation of the shutter for minimum opening size 1.5 mtr. (L) X 1.35 mtr. (W). complete as required as per site conditions. Arrival - 02 No Departure - 1 No
DRAUGHT CURTAIN: Supply & Installation of Draught Curtain cover for the opening of conveyer belt, of suitable size fabricated with 3mm thick Nylon Rubber flaps, to be fixed by SS flat strip as per size of shutter opening etc. the opening size shall be as per dimensions/ drawings approved by Engg.-in-charge, complete as required as per site conditions. Arrival - 02 No Departure - 1 No
Weighing Scale Conveyor. Integrated Weighing Scale Conveyor: Design, supply, installation, testing & commissioning of following size heavy duty slider bed belt weighing scale conveyor equipped with illuminated push butter for introduction of baggage into dispatch conveyor (after baggage had been weighed & tagg-s complete with LCD/LED dual display type weighing scale with 4 nos. high resolutions load cells each of suitable capacity, Accuracy class C3 to C6 with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth / rough top, flame retardant, antistatic, sobust, flexible, capable of providing continuous service, and of very low friction type belt having useful width 650mm (minimum) and overall frame size 825 mm (maximum), height'as per system design of OEM and functional requirment at passenger end and the other end suitably sloped for easy flow of baggage with speed as per system design of OEM and functional lequirment. The bed shall be made of 3 mm thick (minimum) galvanized or epoxy coated mild steel sheet. weighing scale, drive pulley, tension adjustment, frame and supports, Trim / fascia covering / finishing, head and tail pulley, return / snub rollers, side wall / Guard with control logic and protection as per technical specifications for baggage handling system including all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment grouting, earthing, etc., complete as required for successful operation of the system, (a) Length 1200 mm (Nominal)
Feeding Inject Conveyor: Design, supply, installation, testing & commissioning of following sizé heavy duty slider bed belt dispatch conveyor complete with 2 ply, 3mm minimum thickness polyster black colour carcass PVC smooth top, flame retardant, antistatic, robust flexible, capable of providing continuous service, and of very low friction type belt (Diamond cut Belt of 7.5 mm thickness ia also acceptable), normal live load 35 kg per linear meter having useful belt width such that it fits within the frame, without much side play and shall match with that of integrated weighing conveyor and overall frame size matching with integrated weighing conveyor, height as per system design of OEM and functional requirment suitably sloped for easy transfer of baggage from one section to adjoining section with speed as per system design of OEM and functional requirment. The bed shall be made of 3 mm thick (minimum) galvanized 5 epoxy coated mild steel, drive pulley, tension adjustment, frame and suppor's, Trim / fascia covering / finishing, head and tail pulley, return rollers, side wall / Guard; Vertical baggage guide / tipping device with control logic as per technical specifications for baggage handling system including all electrical switchgears component, cabling, connection / interconnection, Controls, cutting & drilling of holes, equipment grouting, earthing, etc., complete as required for successful operation of the system, (a) Length 1200 mm (Nominal)
Collector and Take Away conveyor system: Design, Supply, Installation, testing and commissioning of heavy duty slider bed belt type take away conveyor system having useful belt width 950 mm and frame size 1050 mm and height 400 mm from finished floor level, Normal live load 35 KG per linear Mtr., speed of 21-25 mtr. per min. / as per system functional requirement complete with 2 ply, 3 mm aluminium thickness polyster black colur carcass PVC smooth top, flae retardant, antistatic, robust, flexible, capable of providing continuous service, and of very low friction type belt. The bed shall be made of 3 mm thick (minimum) gavanized mild steel sheet, drive unit, tension adjustment, frame and supports and cross members, support spacing, Trim / fascia covering / finishing, drive pulley, head and tail pulley and snub rollers, return rollers, vericle baggage guide / tipping device side wall / Guard with control logic and protection as per Technical spifications for baggage handling sytem includingall electrical switchgears component, cabling, connection / interconnection, controls, cutting & drilling of holes, equipment grouting, earthing etc., complete as required for successful operation of the system in the departure check-in area. Collector conveyor - 7.5 mtrs. Transport conveyor of 7.5 mtrs
Gravity roller conveyor Design, Supply, installation, testing & commissioning of following section length having gravity rollers of length 950 mim (approx.), roller capacity 35kg per linear meter, 60/65 mm pitch/ día or as per manufacture's recommendation, width section 1000 mm and height suitably matched and sloped, complete in all respects i/c conveyor frame section, rollers, supports as per technical specifications for baggage handling system including cutting & drilling of holes, equipment grouting etc. as required after dismantling the existing gravity roller and stacking the dismantled old material in the store, (a) Section Length 2000 mm
Year 3 (First year after DLP)
Year 4 (Second year after DLP)
Year 5 (Third year after DLP)
Year 6 (Fourth year after DLP)
Year 7 ( (Fifth year after DLP)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.79 MB
BHSFINALTENDER.pdf
Tender Documents • 20.31 MB
BOQ_298328.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].