Rejuvenation of Jalah Departmental Fish Farm

Amount

Construction of Boundary Fencing

CPWD(2021)/2.6. Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil

CPWD(2021)/7.7. Course Rublle Masonry (Second Sort) with hard stone in foundationand plinth : cement mortar (1:6) (1cement:6coarse sand)

CPWD(2021)/5.22. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

8mm/10mm/12mm/16mm tor

CPWD(2021)/5.22A. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

8mm/12mm tor

CPWD(2021)/5.9. Centering and shuttering including strutting, propping etc. and removal of form for

CPWD(2021)/5.9.5. Lintels, beams, plinth beams, girders, bressumers and cantilevers

CPWD(2021)/5.9.6. Columns, Pillars, Piers, Abutments, Posts and Struts

CPWD(2021)/5.1.3. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)

CPWD(2021)/5.2. Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

CPWD(2021)/16.70.1. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm4 coarse sand)

CPWD(2021)/13.44.1. Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

Construction of Departmental Farm Gate

CPWD(2021)/2.6. Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.2.6.1 All kinds of soil

CPWD(2021)/11.2. Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.

CPWD(2021)/4.1.5. 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

CPWD(2021)/5.22. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

8mm/10mm/12mm/16mm tor

CPWD(2021)/5.22A.. Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

8mm/12mm/16mm tor

CPWD(2021)/5.9. Centering and shuttering including strutting, propping etc. and removal of form for

CPWD(2021)/5.9.1. Foundations, footings, bases of columns, etc. for mass concrete

CPWD(2021)/5.9.5. Lintels, beams, plinth beams, girders, bressumers and cantilevers

CPWD(2021)/5.9.6. Columns, Pillars, Piers, Abutments, Posts and Struts

CPWD(2021)/5.1.2. Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

CPWD(2021)/5.2. Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

CPWD(2021)/6.2. Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

CPWD(2021)/13.8. 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 13.8.2 1:4 (1 cement: 4 fine sand)

CPWD(2021)/13.80. Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

CPWD(2021)/13.83. Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.83.2 Two coats

CPWD(2021)/10.1. Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel rimer all complete.

Painting departmental fish farm name in the facia of the gate top.

Renovation of Stocking Tank

DF/AR(2008)2.A. Bailing out accumulated water from the Tanks / Ponds / Beels / Swampy and marshy areas with the help of power pump machines to expose the beds to sunshine till suitable for excavation in the form of earth as per direction and requirement of the deptt. etc. complete including the cost of transportation fo power pump machine.

APWD(SH&MDR-2018-19) 3.10. Excavation in Marshy Soil with Hydraulic Excavator of 0.9 cu.m bucket capacity including cutting and loading in tippers and disposal with a lift upto 1.5m and leas upto 1000m, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sectionss ( The excavated earth may be used in filling low lying margnal area and in construction of peripherial demarcation and for embedding hume pipe etc. if requred.)

Installation of Solar Street Light

Analysis of Rate: Supplying and installation of Solar Street light LED power 20W 12.4V/23 Ah Lithium ferro Phosphate battery having led life 50000 Hrs and charging time 8 hrs with galvanized mountig pole having a height of 6 mtrs)minium 150mm dia) with base plate with all necessary galvanized bracket, earthwork, PCC(1:1.5:3) foundation of section 0.5mm X 0.5 m underground (1.2)/over ground (0.6m) embedding the pole, testing complete etc.

M/S B.K ASSOCIATES (BID ID -255754)

MS R C Enterprise (BID ID -255784)

KUSHAN CHOUDHURY (BID ID -255599)

Jayanta Das (BID ID -255495)

Maa Kamkhya Traders (BID ID -255588)

MUNIN DAS (BID ID -255616)

SMTI MALLIKA DAS (BID ID -255765)

Ghanashyam Kakoti (BID ID -255564)