SUPPLY OF TOOL EQUIPMENT AND FURNITURE AT BMCJ GOVT ITI KARNAL

Water C02 Type Fire Extinguisher,9 Ltrs Construction and rating shall confirm to IS 15683, Extinguishing agent Water, Gross weight Not exceeding 12Kg, Operating pressure- Nitrogen pressurization with 10 to 15bars,Operating temperature -300C to + 550C Material of manufacture Extinguisher shall be manufactured using following materials. i. Rubber sleeve (neck) ii. Rubber sleeve (base) iii. Bracket : Mild Steel iv. Neck Ring : PVC v. Nozzles : Plastic vi. Syphon Tube : Plastic vii. Valve Assembly : Forged Brass viii. Neck Ring : Mild Steel ix. Body : Mild Steel Sheet lifegaurd/ safex/ omex

Stored pressure Type Fire Extinguisher,9 Ltrs Min. Discharge Percentage 95% Min. Discharge Time 13 Seconds Charge Pressure 15 Kgf / cm2 Test Pressure 35 Kgf / cm2 Operating Valves Squeeze Grip Type Extinguisher Media Water Expellant Dry Nitrogen Anti Corrosive Treatment Phosphating (7 Tanks) Painting Epoxy Polyester Powder Coating Operating Temperature 55 Degree Celsius Min. Jet Length 2 meter lifegaurd/ safex/ omex

Chemical Foam type Fire Extinguisher, 9 Ltrs Pressure: Hydraulic Test Pressure: 35 Kgf/cm² Service Pressure: 16 Kgf/cm² Certificate : CM/l No.2531748, ISO 9001 Specifications: Type Of Extinguisher Media:Mechanical Foam (AFFF) IS:4989 Operating Position: Upright Discharge Time: More than 13 second No. of Items in Pack: 1 Minimum Effective Discharge: 95% Specifications Met: IS 15683 Temperature Range: (+) 5 °C to (+) 55 °C Fire Rating: 4A,34B Model: FSF-SP-9 Minimum Jet Length: More than 2 m Class: A & B class of Fires Key Features: Expellant: Pressurized with N2 Gas Operating Valve: Squeeze Grip Type With Discharge Hose & Nozzle Specification(Gas cartrridge Type): Capacity: 9 Ltrs Pressure : Hydraulic Test Pressure:35 Kgf/cm² Service Pressure:16 Kgf/cm² Certificate: CM/l No.2531748, ISO 9001 Specifications: Type Of Extinguisher Media: Mechanical Foam (AFFF) IS:4989 Operating Position: Upright Discharge Time: More than 13 second No. of Items in Pack: 1 Minimum Effective Discharge: 95% Specifications Met: IS 15683 Temperature Range: (+) 5 °C to (+) 55 °C Fire Rating: 4A &34B Model: FSF-GC-9 Minimum Jet Length:More than 2 m Class:A&B class of Fires Key Features: Expellant: Pressurized with Gas 60gm/120gm Gas Cartridge Operating Valve: Squeeze Grip Type With Discharge Hose & Nozzle lifegaurd/ safex/ omex

Mechanical Foam type Fire Extinguisher 9Ltrs Certification IS 15683 . Certificate shall be submitted along with the supply of extinguishers,Gross weight Not exceeding 13Kg,Mounting Suitable fittings shall be provided for mounting the extinguisher on wall,Discharge hose assemblies Discharge hose assemblies shall be as per clause 9.8 of IS 15683, with foam making branch .Operating pressure Nitrogen pressurization with 10 to 15bars. Operating temperature -30 degreeC to + 55 degree C,Hydro test and burst pressure test Shall pass hydro test pressure of 35 bars 2.5 minutes and with stand a burst pressure of 55 bras(prescribed in clause 9.2.2 of IS 15683 ),Material of manufacture Extinguisher shall be manufactured using following materials. i. Rubber sleeve (neck) ii. Rubber sleeve (base) iii. Bracket : Mild Steel iv. Neck Ring : PVC v. Nozzles : Plastic vi. Syphon Tube : Plastic vii. Valve Assembly : Forged Brass viii. Neck Ring : Mild Steel ix. Body : Mild Steel Sheet,Discharge percentage Not less than 90 %

C02Type Fire Extinguisher,4.5 Kg Construction : Cylinders bearing IS: 7285 & brass forge valve IS: 3224 Capacity : 4.5 Kg. Specification no.: IS:2878, latest Revision followed Complete Weight-Empty with Valve,Hose,Horn : 10 Kg. Complete Weight - Charged : 15 Kg. Filling Ratio : 0.667 Kg/Ltrs. Overall Height with Valve :660 mm. Working Pressure : 58-60 Kg/Cm2 Charge : Co2 confirming to IS: 15222 & Filled with liquefied Co2 gas filling ratio <=0.667 Finish : Painted in synthetic enamel red/fire re epoxy polyester coating. Accessories : Wall mounting brackets & trolley for 6.5, 9 & 22.5kgs. Operation : Keep Extinguisher upright and hold in hand firmly. Remove safety pin and turn the wheel anti-clockwise. Direct discharge at the base of the flames. Maintenance : Strictly as per IS:2190 for satisfactory performance Diameter of Cylinder 140 mm. Range of Discharge : 2.5 to 3 meters. Duration of Discharge :24 Seconds. Length of Hose Pipe : 1 meter.

BCType Fire Extinguisher, trolly type 10 Kg Fire Extinguisher Type B C (Dry Powder Type) Material Mild Steel Usage/Application INDUSTRIAL / FACTORY / PETROL PUMPS Fire Class A, B, C Discharge Range (meters) >2 m Maximum Service Pressure 3.0 Mpa Certification ISI Color Red Discharge Range More then 6 Mtrs. Discharge Time more than 8 sec. Minimum Order Quantity 50

ABC Type Fire Extinguisher trolly type 10 Kg Fire Extinguisher Type A,B,C (Dry Powder Type) Material Mild Steel Usage/Application INDUSTRIAL / FACTORY / PETROL PUMPS Fire Class A, B, C Discharge Range (meters) >2 m Maximum Service Pressure 3.0 Mpa Certification ISI Color Red Discharge Range More then 6 Mtrs. Discharge Time more than 8 sec. Minimum Order Quantity 50

Extension Ladder (Size),45/35 ft Ladder Type Extendable Height 35 to 45 feet Material Aluminum Load Bearing Capacity 50 to 100 kg Surface Treatment Hot Dipped Galvanized Is It Adjustable Adjustable Xeuns/ SJ Ladders/ S.Quality

All types of Branches or Nozzles TECHNICAL SPECIFICATION Size of Branch Pipe: 63 mm Size of Nozzles: 6mm, 12 mm, 20 mm and 25 mm Material: Gunmetal / Stainless / Aluminium Alloy Confirming Specification: IS 903: 1993 PERFORMANCE TEST Hydraulic Test: Tested at 21 Kgf / cm2 Working Pressure : 7kgf / cm2 Finish: Natural Polished Hologram: Sticker Stuck on Nozzle XEUNS/ S.quality

Fire Hose a) 15m--Material CPVC Working Pressure 21.4 kg/cm^2 Usage/Application Fire Fighting Length 15 Meter Type Hydraulic Hose Pipe Burst Pressure 35.7 kg/cm^2 SK/ XEUNS/S.Q

Fire Hose b) 30m--Material CPVC Working Pressure 21.4 kg/cm^2 Usage/Application Fire Fighting Length 30 Meter Type Hydraulic Hose Pipe Burst Pressure 35.7 kg/cm^2 SK/ XEUNS/S.Q

BA Set Negative & Positive Pressure--Product Details Product Specification Type EN137 2006 Max Working Pressure 300 bar Usage/Application Industrial/Fire fighting Material Carbon Fiber Volume Of Cylinder 6.8 Ltr

Portable Fire Pump/TFP The portable pump shall comply with EN 14466 & shall have minimum output of 1600 LPM as per IS 12717.The pump tested by manufacturer at hydrostatic pressure test of 25 kg/cm² and shall not show any leakage. Pump shall be tested for performance - Discharge capacity at a suction height of 3 Metres. Name of the item/ pump accessory -- Two wheel trolley 01 No. ,Tool Kit comprising of all essential tools required for normal maintenance of the pump 01 No.,Search Light detachable 01 No.,PVC Suction Hose of 100 mm x 2.5 mtrs fitted with Gunmetal couplings as IS-902 02 Nos.,Gun Metal Suction Strainer to fit in above Suction Hose Pipe 01 No., Basket Strainer 01 No.,Universal Suction Wrenches 04 Nos.,Gun Metal Suction Adapter (100mm X 63mm Inst.) 01 No.,Battery Charger 1 No. SK Jain/ Xeuns

Hydrant-Stand Pipe Type Hydraulic pressure tested to: 23 kg/cm2 sizes: 3”, 4”, 6” Item description : Standpipes for fire brigade use available with Aluminium/ copper/ g. I. Provided with instantaneous/ threaded inlet and outlets. Material of construction : Aluminium/ copper/ g. I. Pipe. Gunmetal/ al. Alloy inlet/ outlet. Inlet: female instantaneous/ round thread. Outlet : swivel head/ female instantaneous. Sizes: 2½”, 4” Item description : fire hydrant stand pipe single outlet, having 63mm female round thread / female inst. Inlet & 63mm female inst. Outlet used for under ground fire hydrant valve Ref. Standard : is:5714 Item description : fire hydrant stand pipe double outlet, having 63mm female round thread / female inst. Inlet & 2 nos. 63mm female inst. Outlet used for under ground fire hydrant valve Ref. Standard : is:5714SK Jain -Xeuns

Manual call point Sk Jain/ Xeuns

Entry Suit/ Proximity Suit Usage/Application Fire Fighting Operation Type 3 Layer Material NOMEX Size Free Size Gender Unisex Pattern Coat Pant Glove Type Five Finger Colour Blue No. Of Layers 3 Layer Shoe Type Gumboot Fire Retardant & Electric Shock Proof Product Type Jackets & Coats Wear Type Not Reflective Helmet Shell PTFE Material Face Protector Polycarbonate Helmet Face Shield Boot Upper Construction Rubber Moisture Barrier Yes Heat Barrier Yes Inner Lining Fire Retardent Condition New Number Of Layers 3 Layers Temperature Resistance Yes Heat Resistance Yes SK Jain Xeuns

Hose reel system Hose Reel Drum Made of high quality mild steel powder coated in red colour confirming to IS-884:latest revision and ISI marked or confirming to EN 671-1:latest revision and EN marked ,Hose Reel Nozzle Nozzle shall be of 05 mm diameter and made of metal confirming to IS-8090: latest revision. , Hose Reel Tubing Thermo Plastic Hose Reel(Type-2)shall be of 20 mm diameter & 30 m long. ,Working pressure The complete assembly shall be capableof operating at 10 bar working pressure without leakage. ,Water Flow rate Flow rate shall not be less than 24 lpm at 07 bar pressure. Sk Jain/ Xeuns

Nitrogen Cylinder a) Cylinder Capacity: 47 lt. water capacity or the nearest standard b) Cylinder Type: Carbon Steel, Wall thickness: 4 mm or higher c) The cylinders shall be as per IS:7285/88 d) Cylinder Valve details: Brass RH 5/8” BSP FEMALE e) The cylinder should be tested up to a pressure:

Hose Box TYPE DOUBLE DOOR DIMENSIONS 750 x 600 x 250 (mm) BODY CR Sheet / FRP option also available GLASS TRANSPARENT ACRYLIC -- 3 MM THICK CR SHEET THICKNESS 18SWG / 16SWG / 14SWG LOCK COMMON KEY LOCK KEY BOX Provided HANDLE Provided FINISH Coats of enamel paint of PO red from outside and white color from inside SK/ XEUNS

Section Hose 10 ft Material CPVC Usage/Application Fire Fighting Length 10 ft Diameter 65mm Hose Color Brown Lining With Lining SK/ XEUNS

Section Wrench Made as per IS:4643, for use with Suction couplings. Item Description : M.S. Suction Wrench for Suction Couplings Material of Construction : M.S. rod, zinc coated Sizes : 75mm, 100mm, 125mm, 140mm. SK/ XEUNS

Metal Strainer Material Gun metal-GM Aluminium Alloy-AL Stainless steel-SS Test Pressure 21 Bar Size 3"/4"/5"/5 1/2" Thread Round thread Note Mention GM/AL/SS for material SK/ XEUNS

Ropes,100 ft Long Diameter 20 mm, Material Nylon SK/ XEUNS

Lines 100 ft Long Length,Diameter 50mm Hose Color Red Lining With Lining Pressure 0.8 MPa Material PU SK/ XEUNS

Control Panel - Model

Personal Protective Equipment

a) Helmet (Type A,B,C) ESCORP/ JAINARC/ XEUNS

b) Laser Welding Safety Goggles ESCORP/ JAINARC/ XEUNS

c) Face Shield Disposability Non-Disposable Size 360x220mm Products in the Kit Face Protection Shield / Face Viso Material : Ultra Clear Pet Visor Thickness : 175 Microns. ESCORP/ JAINARC/ XEUNS

d) Welding Shield Usage/Application Welding Size S, M, L Material High Glass PVC Color Red Net Weight 320 Gms Packing 60 Pcs Surface Finish Color Coated ESCORP/ JAINARC/ XEUNS

e) Ear Muff Noise Reduction rating 25 dB - 30 dB Mount Type Over The Head Foldable No Feature Comfortable Soft Ear Cushion Material ABS Plastic ESCORP/ JAINARC/ XEUNS

f) Ear Plug Type Ear Plug Usage/Application Noisy Environment Color Orange Material Silicone Rubber Size 12 .5 x 32 mm ESCORP/ JAINARC/ XEUNS

g) Canal Caps High tensile strength Rugged construction Accurate dimensions. ESCORP/ JAINARC/ XEUNS

h) Safety Shoes Outsole Material PVC Size 6 - 10 Protection Level S1 Color Black Ankle Type Low Ankle Closure Type Laces Features Anti Skid Certification ISI Minimum Order Quantity 500 ESCORP/ JAINARC/ XEUNS

i) Asbestos Gloves Technical Specification: Made from Asbestos cloth Heat resistance range upto 350 degree Economical and most durable Superior flannel lining Length: 10" to 18” or as required. Usage: Workmen protection against heat & fire hazards. ESCORP/ JAINARC/ XEUNS

j) Electrical Hand Gloves Property Electrical Safety Voltage Resistance 5 Kv to 33 Kv Color White Wear Type Full Fingered Gender Unisex Disposable No Brand Crystal and crest ESCORP/ JAINARC/ XEUNS

k) Hand Gloves (Rubber) Property Electrical Safety Voltage Resistance 5 Kv to 33 Kv Color White Wear Type Full Fingered Gender Unisex Disposable No Brand Crystal and crest

1) Dust Mask Usage/Application Industry Material Cotton Color White Size S to XXL Weight 100 grams Gender Unisex Packaging Type Packet

Personal Protective Clothing for men

a) Safety Shirt colour-blue, Light in weight Excellent design Superb performance Nominal rates Less maintenance Long lasting nature ESCORP/ JAINARC/ XEUNS

b) Safety Trouser Color Blue Pattern Plain Brand SBA Workwear Fabric Cotton Packaging Type Packet Wash Care Machine Wash ESCORP/ JAINARC/ XEUNS

c)Safety Jacket Feature Waterproof, Dust-proof, Breathable Wear Type Reflective Sleeve Type Without Sleeves Gsm 60 ESCORP/ JAINARC/ XEUNS

d) Cooling Vest Size Free Size Color Yellow Wear Type Reflective ESCORP/ JAINARC/ XEUNS

e) Gum Boots Size 5X11 Sole PVC Height 365 +- 10 mm (14.0 +- 0.4 inch) Knee Upper Material PVC (Soft) Sole Design Anti Skid Lug Sole ESCORP/ JAINARC/ XEUNS

Personal Fall Arrest System (PFAS) Size 14-16 MM Color NA Type Height Safety Function Fall Arrest ESCORP/ JAINARC/ XEUNS

Body Harness Product Description thigh strap with dual colour scheme for differentiation Shoulder & thigh strap with dual colour scheme for differentiation 44 mm Polyester Webbing with Min. Breaking Strength 25 kN Automatic stitching pattern with strength Metal type chest strap with easy handling Adjustable dorsal high strength forged D-ring, Min. Breaking Strength 25 kN Finished Webbing Ends with web holder. Special design & high resistant polyethylene Back Plate for holding D-Ring even after the fall

Hydraulic Pressure Testing Machine Type test station 1.5 to 25 kg (0.15 to 2.5 MPA) Acceptane test .5 to 100 kg (.5 to 10 Mpa) Power supply 230 Volt single phase 50 Hz AC Power consumption 500 Watts max. Compressed air Pressure 7Kg / cm2 Consumption 45 LPM (1.5 CFM) Water 1/2" Pipe connection from an overhead tank preferably soft water ESCORP/ JAINARC/ XEUNS.

Sprinklers Head (Bulb Type, Fusible Type) bulb typr-Material brass crome plated Bulb Size 15 mm Temperature Rating 68 degree Mounting Type pendant Working Pressure 12 bar Finishing crome plated Thread Size 15 mm Color red K Factor 80 Response Standard Warranty 12Months Connection NEW Quick Response 3mm Max Working Pressure 175psi, FUSIBLE TYPE--Material Brass Usage/Application Fire Fighting Bulb Size K 240 Temperature Rating Accurate Size 3/4" inch Mounting Type Ceiling Mounted Working Pressure High Finishing Good Thread Size 3/4 bsp Color Brass Features Fusible link K Factor 80 to 360 Response Advanced Bulb Non Nominal K-Factor K24 Standard Response Advanced ESCORP/ JAINARC/ XEUNS

Safety Belt Size 1.5 mm Material Polyester Usage Safety purpose Length 1.8 meter Weight 2.3 Kg

L.C.D. Projectors 1080p HD resolution – FULL HD (1920 x 1080) • LED technology: last up to 30,000 hours no need for changing lamp • High brightness of max. 1,000 ANSI lumen (High Mode) and high contrast ratio of 100,000:1 • Intel WiDi and Miracast technology for wireless video and audio streaming • Projection diagonal of 20” (50.8 cm – 304.8 cm) • Fast start-up within only 10 seconds,2 x USB connection and JPEG4 playback • Integrated Wi-Fi • Integrated stereo speaker 2 x 5 W • Expert mode for colour setting • Low noise emission of < 24 dBA (Eco) • Easy control via Soft Touch Pad on device or IR remote control,Compact, powerful and light LED projector for home and mobile use • Various connections via HDMI, video component with adapters • High quality and stable case of only 2.2 kg • DMD DLP Chip of the newest generation (0.65”) • Free of harmful mercury EPSON/ HITACHI/ BENQ

UPS 650 VA offline Capacity 650 VA Input Voltage 240 V Protection OverVoltage Color Black Type Offline UPS Output Voltage 120 V Frequency 60 Hz Backup Time 20 Minutes MICROTEK/GENIUS/AMRON

All types of Detectors 1 Pes. of each Fire Detector-Color White Material Plastic Ambient Humidity 0 ~ 95% Mounting Type Wall and Roof,Smoke Detector Usage/Application Fire Fighting Alarm Sensor Type Optical Automation Grade Automatic Material Plastic Voltage 220V,

Fire Suit Usage/Application Fire Fighting Operation Type 3 Layer Material NOMEX Size Free Size Gender Unisex Pattern Coat Pant Glove Type Five Finger Colour Blue No. Of Layers 3 Layer Shoe Type Gumboot Fire Retardant & Electric Shock Proof Product Type Jackets & Coats Wear Type Not Reflective Helmet Shell PTFE Material Face Protector Polycarbonate Helmet Face Shield Boot Upper Construction Rubber Moisture Barrier Yes Heat Barrier Yes Inner Lining Fire Retardent Condition New Number Of Layers 3 Layers Temperature Resistance Yes Heat Resistance Yes SK/ XEUNS/ ESCORP

Instructor’s table Table-2.5*4*2.5 Feet Table top made up of 18mm thick ply wood board with 2mm thick lipping on the edges. Understructure made up of MSERW sqaure cube of size 30x30x1.6(mm) thick. Side, front, back panel made up of 18mm prelaminated twin board. Table includes pedestal made up of combination of ply wood panel and MS sheet. Overall size 439Wx729Dx536H(mm). Colors: Silver Grey and Teak. M.S. Sheets(18 SWG used), Pipes(wall thickness 2 mm), square & angles and Board ISI marked WOODITALIA/ XEUNS/GODREJ

Instructor’s chair Steel chair with arms, frame made of 16 gauge round pipe of 1”. Wooden seat & back made of 10mm teak wood. Seat & back with good quality polish. chair with chrome polish . Seat Size:18"x18". Back size:18" overall height 36" with arm M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Lockers with 16 drawers standard size Student Locker 1980 X910X480 mm, 16 pigeon holes IS 3312-1984 made of MS sheet 18 SWG. Good quality handle , Fitted with locks & keys. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Steel Almirah 2.5 m x 1.20 m x 0.5 m Standard Steel Almirah having dimensions of 2.5 m x 1.20 m x 0.5 m with 18 SWG along with cupboard as well as as per IS 3312-1984 made of MS sheet 18 SWG , Five compartments adjustable type ,Good quality handle , Fitted with lock & key. with at least 5 shelves. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Fire Extinguisher Construction and rating shall confirm to IS 15683, Extinguishing agent Water, Gross weight Not exceeding 12Kg, Operating pressure- Nitrogen pressurization with 10 to 15bars,Operating temperature -300C to + 550C Material of manufacture Extinguisher shall be manufactured using following materials. i. Rubber sleeve (neck) ii. Rubber sleeve (base) iii. Bracket : Mild Steel iv. Neck Ring : PVC v. Nozzles : Plastic vi. Syphon Tube : Plastic vii. Valve Assembly : Forged Brass viii. Neck Ring : Mild Steel ix. Body : Mild Steel Sheet lifegaurd/ safex/ omex

Fire Buckets Capacity Upto 5 Kg Body Material Mild Steel Thickness Upto 6 mm Usage/Application Fire Safety Corrosion Resistance Yes Surface Finishing Color Coated lifegaurd/ safex/ omex

Single Bed Operating Type / Automation Grade Manual Bed Type Semi Fowler Frame Material Mild Steel Elevation Head Side Wheels available Yes Usage/Application Hospitals Adjustable Yes Folded Yes Finish Powder Coated Number Of Wheels 4 Wheel WOODITALIA/ XEUNS

Small Table Overbed Table Dimension: L30*W15*H28-45 Inches Material: Steel and wood Height adjustment: 28-45Inches Accessories included for installation Weight Capacity: 25Kg N.W: 10Kg G.W: 11Kg WOODITALIA/ XEUNS

Hanger FeatureAdjustable, Corrosion Resistance, Easy To Clean, Easy Use, Height Spring Loaded, Polished Surface Height4-5 Feet ApplicationClinic, Hospital, Laboratory MaterialAluminium, Pvc, Stainless Steel, Steel rod length20-24 Inches FinishingColor Coated, Polished WOODITALIA/ XEUNS

Vacuum cleaner PHYSICAL SPECIFICATIONS Body Typesimple Dust Capacity8 Litres DIMENSIONS MM (WxDxH)330 x 355 x 490 No. of Accessories13 Accessory ModulesFloor brush, Carpet brush, Corner cleaner, Extension tubes 3, Spray jar, Floor wet squeegee TECHNICAL SPECIFICATIONS Suction of Motor2300 mm/wc (22550 Pascals) Blower Efficiency1400 Litre / Minute POWER SPECIFICATIONS Input Power (IEC)1300 Watts Voltage230 V AC, 50 Hz CONVENIENCE EUREKAFORBES/ BLACK & DECKER/ BURGMAN

Public telephone LCD Desplay,With Caller ID ,With Speaker phone.

Grab handle, call bell, wheel chair 1. Product Dimensions ‏ : ‎ 19 x 6 x 15 cm; 400 Grams, Cromenikale Steel 304, Item Weight ‏ : ‎ 400 g Item Dimensions LxWxH ‏ : ‎ 19 x 6 x 15 Centimeters Included Components ‏ : ‎ 1-Pcs GrabBar 2. Indicator receiver with 2 indicators Signal range 20-30 meters indoors Outdoors range 100-200 meters 85db buzzing sound TOP button: to alert attendant with fast beeping sound BOTTOM button: turn OFF signal / indicator on receiver Center button: to alert attendant with slow beeping sound Adjust the volume just by rotating the knob 3.- Folding wheelchair with fixed arm & footrest. - Powder Coated frame. - Solid Spoke wheels. - Rear wheel locks. - Elegantly designed, cloth look like, water-resistant upholstery with a convenient seat size of 17" (43 cm). Load carrying Capacity: 100 Kg/220 lb. Net Weight (approx.): 18 Kg/40 lb.

Almirah with (8) self W x H x D: 900 mm x 1870 mm x 450 mm (2 ft 11 in x 6 ft 1 in x 1 ft 5 in) Door Made With 18gauge sheet 8 selves ground space 6 inch body completely made with 20 gauge sheet fully powder-coated with CRCA steel. WOODITALIA/ XEUNS/GODREJ

Stretcher Removable stretcher with adjustable backrest of cushion seat Overall size- 2030 (L) x 560 (W) x 820(H) structure rests on 100 mm swivel castors made of MS steel tube, whose dimensions are 30 x 2 mm Castor Locking System 2 castor with locking Back Rest Tilt Back 60 degree adjustable Size 84X24X36

Sphygmomanometer Digital BP Monitor with USB Port -Smart Inflation Technology -WHO Indicator -Pulse Reading -Memory Storage for 2 Persons OMRON/ PHILIPS/ BEURER

Thermometer Digital type OMRON/ PHILIPS/ BEURER

StethoscopeTechnical Specifications Frequency range 30 Hz ... 150 KHz Operating temperature -10 ... +40 °C Output volume digitally adjustable (32 levels) Headphones 32 Ω Power supply 4 x AAA battery Battery life 30 h Dimensions 220 x 35 x 35 mm Length sensors 70 / 280 mm OMRON/ PHILIPS/ BEURER

Glucometer (Automatic) Fast result in 5 seconds Small 0.5uL blood sample size Large memory. 10 Lancets Minimum Blood Sample: 0.5 microlitre ; It features a large display screen that can store up to 300 test results OMRON/ PHILIPS/ BEURER / ACCUCHECK

Measuring Steel Tape 5 meter VENUS/ FREEMAN

Screwdriver Insulated 4mm X 150 mm, Diamond Head TAPARIA/ VENUS/ DEENERS

Screwdriver Insulated 6mm X 150 mm TAPARIA/ VENUS/ DEENERS

Electrician screwdriver thin stem insulated handle4mm X 100 mm TAPARIA/ VENUS/ DEENERS

Electrician Screwdriver thin stem insulated handle 4mm X 250 mm TAPARIA/ VENUS/ DEENERS

Punch Centre 9mm X 150 mm TAPARIA/ VENUS/ DEENERS

Knife Double Bladed Electrician 100 mm STANDLEY/ IMPORTED

Steel Rule Graduated both in Metric and English Unit 300 mm with precision of 1/4th mm KRISTEEL/ XEUNS/ SAGAR

Pincer 150 mm TAPARIA/ VENUS/ DEENERS

C- Clamp 150 mm TAPARIA/ VENUS/ DEENERS

Spanner Adjustable drop forged, SS 150 mm & 300mm TAPARIA/ VENUS/ DEENERS

Blow lamp brass 0.5 ltr

Chisel Cold 25 mm X 200 mm TAPARIA/ VENUS/ DEENERS

Chisel firmer with wooden Handle 6 mm X 200 mm

Allen Key alloy steel TAPARIA/ VENUS/ DEENERS

Grease Gun 0.5 ltr. Capacity PRIMA/ VENUS/ DEENERS

Bradawl

Pully Puller with 3 legs 150 mm & 300mm PRECISE/ APEX/ LION/ XEUNS

Bearing Puller (inside and outside) 200 mm PRECISE/ APEX/ LION/ XEUNS

Pipe vice Cast Iron with hardened jaw open type 100 mm PRECISE/ APEX/ LION/ XEUNS

Scissors blade, SS 200mm

Scissors blade, SS 150 mm

Wire Cutter and Stripper 150 mm TAPARIA/ VENUS/ DEENERS

Mallet hard wood 0.50 kg

Hammer Extractor type 250 grams TAPARIA/ VENUS/ DEENERS

Inside Calliper 150 mm spring type KRISTEEL/ XEUNS/ SAGAR

Divider 150 mm spring type KRISTEEL/ XEUNS/ SAGAR

Pliers long nose insulated 150 mm TAPARIA/ VENUS/ DEENERS

Pliers flat nose insulated 200 mm TAPARIA/ VENUS/ DEENERS

Pliers round nose insulated 100 mm TAPARIA/ VENUS/ DEENERS

Tweezers 150 mm

Snip Straight and Bent heavy duty 250 mm TAPARIA/ VENUS/ DEENERS

Drill hand brace 0-100mm

Drill S.S. Twist block 2 mm, 5 mm and 6 mm set of 3 MIRINDA/ SAGAR/ IT/ ADDISON

Plane cutters 50 mm X 200mm ANANT

Smoothing cutters 50 mm X 200mm ANANT

Gauge, wire imperial stainlees steel marked in SWG & mm Wire Gauge - Metric KRISTEEL/ XEUNS/ SAGAR

Copper bit soldering iron. 0.25 kg

De soldering Gun Heat proof nozzle, PVC type, 250mm HAKKO/ SOLDRON

Hand Vice 50 mm jaw PRECISE/ APEX/ LION/ XEUNS

Table Vice 100 mm jaw PRECISE/ APEX/ LION/ XEUNS

Oil Can 250 ml PRIMA/ VENUS/ DEENERS

Hand Drill Machine 0-6 mm capacity BLACK & DECKER/ BOSCH

Portable Electric Drill Machine 0-12 mm capacity 750w, 240v with chuck and key BLACK & DECKER/ BOSCH

Brake Test arrangement with two spring balance rating 0 to 25 kg HTC/ XEUNS/ UNITEC/MUSTECH

Out Side Micrometer 0 - 25 mm least count 0.01mm INSIZE/ PRECISE

Earth Electrode Primary Electrode 2100x28x3.25mm Secondary Cu Strip 20x5mm

Ohm Meter; Series Type & Shunt Type, portable box type 50/2000-ohm analog HTC/ XEUNS/ UNITEC/MASTECH/VKS

Digital Multi Meter DC 200mv -1000v,0 – 10A & AC 200mv- 750v , 0-10A, resistance 0-20 MΩ and 3 1/2 digit HTC/ XEUNS/ UNITEC/MUSTECH

A.C. Voltmeter M.I. analog, portable box type housed in Bakelite case Multi range 75 V - 150V - 300V - 600V SUNVIJ/VKS

Milli Voltmeter centre zero analog, portable box type housed in Bakelite case 100 – 0 – 100 Mv SUNVIJ/VKS

Ammeter MC analog, portable box type housed in Bakelite case 0 - 500 mA, 0-5 A, 0-25 A SUNVIJ/VKS

AC Ammeter MI, analog, portable box type housed in Bakelite case 0 - 1 A, 0-5 A, 0-25 A SUNVIJ/VKS

Kilo Wattmeter Analog 0-1.5-3KW, pressure coil rating- 240v/440v, current rating-5A/10A Analoge, portable type Housed in Bakelite case SUNVIJ/VKS

Digital Wattmeter 230 V, 1 KW, 50 Hz SUNVIJ/VKS

A.C. Energy Meter Single Phase, 10 A, 240 V induction type BENTEX

A.C. Energy Meter Three Phase, 15 A , 440 V induction type BENTEX

Power Factor Meter Digital 440 V, 20 A, Three Phase portable box type SUNVIJ/VKS

Frequency Meter 45 to 55 Hz SUNVIJ/VKS

Magnetic Flux Meter 0-500 tesla LUTRON

Lux meter lux meter LCD read out 0.05 to 7000 lumens with battery. LUTRON

Tachometer Analog Type - 10000 RPM LUTRON/LT

Tachometer Digital Photo Sensor Type - 10000 RPM LUTRON

Tong Tester / Clamp Meter 0 - 100 A (Digital Type) HTC/ XEUNS/ UNITEC/MUSTECH

Megger Analog - 500 V HTC/ XEUNS/ UNITEC/MUSTECH/VKS

3- point D.C. Starter For 2.5 KW DC motor UNITEC/ XEUNS/ RAJAT/VKS

4- point D.C. Starter For 2.5 KW DC motor UNITEC/ XEUNS/ RAJAT/VKS

Wheat Stone Bridge with galvanometer and battery UNITEC/ XEUNS/ RAJAT/VKS

Single Phase Variable Auto Transformer 0 - 270 V, 10Amp (Air cooled) UNITEC/ XEUNS/ RAJAT/VKS

Growler 230 V, 50 Hz, Single Phase, Adjustable jaws, Testing armature with ampere meter and testing probes. UNITEC/ XEUNS/ RAJAT/VKS

Oscilloscope Dual Trace 20 MHz UNITEC/ XEUNS/ RAJAT/OWEN

Function Generator 2 to 200 KHz, Sine, Square, Triangular 220 V, 50 Hz, Single Phase UNITEC/ XEUNS/ RAJAT/POWERWAY

Soldering Iron 25-Watt, 65 Watt and 120-Watt, 230 Volt SOLDRIN/ TONI

Temperature controlled Soldering Iron 50-Watt, 230 Volt SOLDRIN/ TONI

Discrete Component Trainer Discrete Component (for diode and transistor circuit) with regulated power supply +5,0- 5 V,+12 ,0-12 V UNITEC/ XEUNS/ RAJAT

Linear I.C. Trainer Linear I.C. Trainer with regulated power supply 1.2V to 15V PIC socket 16pin and 20 pins with bread board UNITEC/ XEUNS/ RAJAT/POWERWAY

Digital I.C. Trainer Digital I.C. Trainer 7 segment display and bread board UNITEC/ XEUNS/ RAJAT/POWERWAY

Oil Testing Kit Oil Testing Kit 230 V, single phase 50 Hz 60 VA output 0-60 KV Variable UNITEC/ XEUNS/ RAJAT/POWERWAY

Voltage Stabilizer AC Input - 150 - 250 V, 600 VA AC Output - 240 V, 10 A BLUEBIRD/ SERVO/POWERWAY

DC Power Supply 0 - 30 V, 5 A UNITEC/ XEUNS/ RAJAT/POWERWAY

Current Transformer 415 V, 50Hz, CT Ratio 25 / 5 A, 5VA UNITEC/ XEUNS/ RAJAT

Potential Transformer 415 V, 50Hz, PT Ratio, 440V/110V, 10VA UNITEC/ XEUNS/ RAJAT

Working Bench length 240cm x width 120cm x height 90 cm channel dimension 75 x 40x 7 mm, hard wood ( babool ) thickness 3 inch, six legs and two support

Steel Rule with metric & British graduation 150 mm, Stainless steel MITUTOYO/ KRISTEEL/ SHARP

Caliper inside spring type. 150 mm KRISTEEL/ XEUNS/ SAGAR

Caliper hermaphrodite spring type 150 mm KRISTEEL/ XEUNS/ SAGAR

Divider spring type 150 mm KRISTEEL/ XEUNS/ SAGAR

Centre Punch 10 mm and Length - 120 mm KRISTEEL/ XEUNS/ SAGAR

Screw driver 150mm insulated flat type TAPARIA/ VENUS/ DEENERS

Chisel cold flat 20 mm X 150 mm High carbon steel TAPARIA/ VENUS/ DEENERS

Dot punch 100 mm KRISTEEL/ XEUNS/ SAGAR

Steel Rule Graduated both in Metric and English Unit 300 mm Stainless steel MITUTOYO/ KRISTEEL/ SHARP/omega

Straight edge steel 300 mm or above LUTHRA/ BAGSON/ XEUNS

Spirit Level metal Type - 2 300 mm Basic Length Accuracy 0.1mm/Meter IMPORTED

Stud Extractor EZY - out Set of 8 IMPORTED

Combination Set 300 mm INSIZE/mitutoya

Micrometer inside with extension rods. Accuracy 0.01 mm with extension rods up to 150 mm INSIZE/mitutoya

Screw pitch gauge Metric 0.25 to 6 mm INSIZE/mitutoya

Wire gauge, metric standard. MITUTOYO/ KRISTEEL/ SHARP

Surface plate Granite with Stand and Cover 600 x 600 mm LUTHRA/ BAGSON/ XEUNS

Universal scribing block. 220 mm KRISTEEL/ XEUNS/ SAGAR

V-Block pair with clamps 150 x 100 x 100 mm KRISTEEL/ XEUNS/ SAGAR

Punch letter set. 3 mm KRISTEEL/ XEUNS/ SAGAR

Punch number set. 3 mm LUTHRA/ BAGSON/ XEUNS

Portable hand drill (Electric) hamering type 0 to 13 mm Capacity BLACK & DECKER/ BOSCH

Feeler gauge Gauge Feeler / Thickness - 0.05 mm to 0.3 mm by 0.05 and 0.4 mm to 1 mm by 0.1 mm - 13 leaves MITUTOYO/ KRISTEEL/ SHARP

Oil Can 250 ml PRIMA/ VENUS/ DEENERS

Pliers combination insulated 150 mm TAPARIA/ VENUS/ DEENERS

Wooden handle forged Soldering Iron copper bit. 230V, 250 W, 350 gm

Blow Lamp 0.5 litre

Spanner adjustable 150 mm TAPARIA/ VENUS/ DEENERS

Interchangeable ratchet socket set 12 mm driver, sized10-32 mm set of 18 socket & attachments.TAPARIA/ VENUS/ DEENERS

Double Ended tubular Box spanner set with Tommy bar. A/F 6-25 mm set of 10 Tommy Bar Dia. 6, 8, 10, 12, 14, 16 TAPARIA/ VENUS/ DEENERS

Glass magnifying 75 mm

Clamp toolmaker 5 cm and 7.5 cm set of 2.

Clamp "C" 100 mm TAPARIA/ VENUS/ DEENERS

Clamp "C" 200 mm TAPARIA/ VENUS/ DEENERS

Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm MIRINDA/ SAGAR/ IT/ ADDISON

Machine Reamer parallel (Helical flute) 12 - 16mm set of 5. MIRINDA/ SAGAR/ IT/ ADDISON

Scraper flat 150 mm KRISTEEL/ XEUNS/ SAGAR

Scraper triangular 150 mm KRISTEEL/ XEUNS/ SAGAR

Scraper half round 150 mm KRISTEEL/ XEUNS/ SAGAR

Chisel cold crosscut& diamond point. 9 mm X 150 mm KRISTEEL/ XEUNS/ SAGAR

Chisel cold flat 9 mm X 100 mm KRISTEEL/ XEUNS/ SAGAR

Chisel cold round nose 9 mm X 100 mm KRISTEEL/ XEUNS/ SAGAR

Drill chuck with key 12 mm. SHARP

Pipe wrench 400 mm TAPARIA/ VENUS/ DEENERS

Pipe vice 100 mm TAPARIA/ VENUS/ DEENERS

Adjustable pipe die set BSP cover pipe size 1" or 3/4" ALPS/ TOTEM/ XEUNS

Wheel dresser (One for 4 units) Star/Dresser with Holder Length 150 mm, diamond point KRISTEEL/ XEUNS/ SAGAR

Machine vice - Swivel Base 100 mm PRECISE/ APEX/ LION/ XEUNS

Machine vice - Swivel Base 125 mm PRECISE/ APEX/ LION/ XEUNS

Sleeve drill Morse No. 0 - 1, 1 - 2, 2 - 3, 3 - 4, 4 - 5 HI-TECH/ XEUNS

Vice bench 150 mm PRECISE/ APEX/ LION/ XEUNS

Bench working. length 240cm x width 120cm x height 90 cm channel dimension 75 x 40x 7 mm, hard wood ( babool ) thickness 3 inch, six legs and two support

Almirah. Standard Steel Almirah having dimensions of 2.5 m x 1.20 m x 0.5 m with 18 SWG along with cupboard as well as as per IS 3312-1984 made of MS sheet 18 SWG , Five compartments adjustable type ,Good quality handle , Fitted with lock & key. with at least 5 shelves. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Lockers with 16 drawers (standard size). Student Locker 1980 X910X480 mm, 16 pigeon holes IS 3312-1984 made of MS sheet 18 SWG. Good quality handle , Fitted with locks & keys. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Instructor Table Table-2.5*4*2.5 Feet Table top made up of 18mm thick ply wood board with 2mm thick lipping on the edges. Understructure made up of MSERW sqaure cube of size 30x30x1.6(mm) thick. Side, front, back panel made up of 18mm prelaminated twin board. Table includes pedestal made up of combination of ply wood panel and MS sheet. Overall size 439Wx729Dx536H(mm). Colors: Silver Grey and Teak. M.S. Sheets(18 SWG used), Pipes(wall thickness 2 mm), square & angles and Board ISI marked WOODITALIA/ XEUNS/GODREJ

Instructor Chair Steel chair with arms, frame made of 16 gauge round pipe of 1”. Wooden seat & back made of 10mm teak wood. Seat & back with good quality polish. chair with chrome polish . Seat Size:18"x18". Back size:18" overall height 36" with arm M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Machine vice. 100mm PRECISE/ APEX/ LION/ XEUNS

Wing compass. 254 mm or 300 mm KRISTEEL/ XEUNS/ SAGAR

Torque wrench (Standard/Ratchet type) 14 to 68 Nm TORQUE MASTER/AMBIKA

Power tools for fastening Capacity 10-18mm AKARI/ SUMAKE/ CP

Different Profile gauges (Plate type) - For demonstration Metric standard KRISTEEL/ XEUNS/ SAGAR

Knurling tool (Diamond, straight & Diagonal) KRISTEEL/ XEUNS/ SAGAR

Indexable boring bar with inserts 1" shank KRISTEEL/ XEUNS/ SAGAR

Dowel pin (straight) Dia. -1” Length -4" (Mat: Stainless Steel)

Pipe threading die with handle Ratchet type Die head of 1/2”, 3/4" and 1" ALPS/ TOTEM/ XEUNS

Damaged old spur gear to fit 50mm dia. Shaft

Packing gasket PTFE gasket roll small size

Hollow punch Straight Shank Hollow Punch Sets 5-12mm KRISTEEL/ XEUNS/ SAGAR

Drill Drift (May be manufactured in- house) 200mm hardened and black finish

Bearing extractor Universal gear puller 2 or 3 jaws adjustable PRECISE/ APEX/ LION/ XEUNS/TAPARIA

Pulley extractor Universal gear puller 2 or 3 jaws adjustable PRECISE/ APEX/ LION/ XEUNS

Slip Gauge as Johnson metric set. 87 Pieces Set INSIZE/ PRECISE

Gauge snap Go and Not Go 25 to 50 mm by 5 mm, Set of 6 piecesINSIZE/ PRECISE

Gauge plug Single ended 5 to 55 by 5 mm. Set of 11 pcs.INSIZE/ PRECISE

Gauge telescopic set. 8 - 150 mm INSIZE/ PRECISE

Sine bar 125 mm KRISTEEL/ XEUNS/ SAGAR

Screw thread micrometer with interchangeable. Pitch anvils for checking metric threads 60. 0 - 25 mm LC 0.01 mm INSIZE/ PRECISE

Comparators Gauge - Dial Indication with Stand and Bracket. LC 0.01mm INSIZE/ PRECISE

Surface roughness comparison plates N1 - N12 Grade INSIZE/ PRECISE

Pillar Type Drilling machine Sensitive 0-20 mm cap. with swivel table motorized with chuck & key.MATCHLESS/ SANDHU/ JMTC

Drilling machine bench Sensitive 0-12 mm cap motorized with chuck and key. MATCHLESS/ SANDHU/ JMTC

Engineers rule 300mm long MITUTOYO/ KRISTEEL/ SHARP

Pliers flat nose 150mm TAPARIA/ VENUS/ DEENERS

Surface plate 45 x45 cms LUTHRA/ BAGSON/ XEUNS

Surface Gauge universal 150 mm KRISTEEL/ XEUNS/ SAGAR

Snip sheet metal straight nose 200 mm TAPARIA/ VENUS/ DEENERS

Snip sheet metal curved nose 200 mm TAPARIA/ VENUS/ DEENERS

Anvil 100X200mm XEUNS/ LUTHRA/ PRECISE/ INSIZE

Round Punch 3mm,4mm,6mm

Electrical drill portable drill with chuck and key capacity 6.4mm BLACK & DECKER/ BOSCH

Tong tester (clamp on multi meter) 0-10-30 amps 0-500 v HTC/ FLUKE/VKS

Fire buckets 10 Litre lifegaurd/ safex/ omex

Quick couples, process tube adopter ¼” & 3/8” EVEREST/ XEUNS/ FLOWTECH

Pinch of tool, for copper tube, 6mm to 18mm DIA EVEREST/ XEUNS/ FLOWTECH

Piercing pliers & reversing valve with access fitting 6-18mm EVEREST/ XEUNS/ FLOWTECH

Wrench adjustable length 150mm TAPARIA/ VENUS/ DEENERS

Pipe cutter with built in reamer and space cutter, for copper tube 3mm to 32mm EVEREST/ XEUNS/ FLOWTECH

Tap set with matching drills 3 mm to 16mm ALPS/ TOTEM/ XEUNS

Tap set with matching drills V to 5/8" ALPS/ TOTEM/ XEUNS

Four way reversible valve EVEREST/ XEUNS/ FLOWTECH

Ammeter, AC/DC portable precision grade Digital Panel board type 0 to 30 amp SUNVIJ/VKS

Multi meter digital type HTC/ FLUKE/MASTECH

K.W. meter 0 -1 K w SUNVIJ/VKS

Service Oscillator HTC/ FLUKE/ UNITEC/VKS

C.R.O Single beam 5 MHZ HTC/ FLUKE/ UNITEC/OWEN

C.R.O Dual trace/ Double beam 60 MHZ HTC/ FLUKE/ UNITEC/OWEN

A.F.O Oscillators HTC/ FLUKE/ UNITEC/VKS

compoud guage digital type diameter 63 mm with recalibration set screw scale vacuum 760mm pressure 15/kg

Electronic lead detector

Tachometer digital, multi range 0 r m p to 3000 r m p. Portable small size in leather case LUTRON/LT

Micron vacuum gauge capable microns

Fin straightened/fin comb. With strong steel wire-based combing on wood

Filler gauge 0.05 mm - 1 mm INSIZE/ PRECISE

Dial thermometer remote control, armored capillary dial 75mm - 50C to +50 C

Digital thermometer Graduated disc analogy type HTC/VKS

Temperature &Humidity recorder Capacity to record 24 hrs. record HTC

Instrumentation screw driver set 100mm TAPARIA/ VENUS/ DEENERS

Almirah Standard Steel Almirah having dimensions of 2.5 m x 1.20 m x 0.5 m with 18 SWG along with cupboard as well as as per IS 3312-1984 made of MS sheet 18 SWG , Five compartments adjustable type ,Good quality handle , Fitted with lock & key. with at least 5 shelves. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Lockers Student Locker 1980 X910X480 mm, 16 pigeon holes IS 3312-1984 made of MS sheet 18 SWG. Good quality handle , Fitted with locks & keys. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Instructor table Table-2.5*4*2.5 Feet Table top made up of 18mm thick ply wood board with 2mm thick lipping on the edges. Understructure made up of MSERW sqaure cube of size 30x30x1.6(mm) thick. Side, front, back panel made up of 18mm prelaminated twin board. Table includes pedestal made up of combination of ply wood panel and MS sheet. Overall size 439Wx729Dx536H(mm). Colors: Silver Grey and Teak. M.S. Sheets(18 SWG used), Pipes(wall thickness 2 mm), square & angles and Board ISI marked WOODITALIA/ XEUNS/GODREJ

Instructor chair Steel chair with arms, frame made of 16 gauge round pipe of 1”. Wooden seat & back made of 10mm teak wood. Seat & back with good quality polish. chair with chrome polish . Seat Size:18"x18". Back size:18" overall height 36" with arm M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Digital Web Cam High Resolution(3.1 mp or higher) LOGITECH

DVD or Blu-Ray Writer 24X or higher external (usb)

LCD Projector 3000 lumens or higher EPSON/ HITACHI/ BENQ

Projector Screen matte(antiglare) screen

Online UPS 5 KVA MICROTEK/genius/amron/luminous

Crimping Tool RJ-45

Network Rack 4U for 24 port DLINK/ TPLINK

Digital Multimeters 3.5 digit handheld type. HTC/ FLUKE/ UNITEC

Screw Driver Set Standard TAPARIA/ VENUS/ DEENERS

Mini Dongle for Bluetooth devices Connection USB DLINK/ TPLINK

Headphone &mic. Set Wired LOGITECH/jbl/skull candy/bosch

Sound System 2:1 sony/jbl

External Hard Disk 1 TB WD/ TOSHIBA/ SEGATE/

Patch Panel 24 Port DLINK/ TPLINK

LAN Tester UTP cat5 cable tester (RJ 45) DLINK/ TPLINK

Punching Tool for punching RJ 45 socket with cat 5 cable DLINK/ TPLINK

Tally ERP 9 or Latest( telly prime)

Vacuum cleaner Hand Held EUREKAFORBES/ BLACK & DECKER/ BURGMAN

Chair and table for the instructor Table-2.5*4*2.5 Feet Table top made up of 18mm thick ply wood board with 2mm thick lipping on the edges. Understructure made up of MSERW sqaure cube of size 30x30x1.6(mm) thick. Side, front, back panel made up of 18mm prelaminated twin board. Table includes pedestal made up of combination of ply wood panel and MS sheet. Overall size 439Wx729Dx536H(mm). Colors: Silver Grey and Teak. M.S. Sheets(18 SWG used), Pipes(wall thickness 2 mm), square & angles and Board ISI marked Steel chair with arms, frame made of 16 gauge round pipe of 1”. Wooden seat & back made of 10mm teak wood. Seat & back with good quality polish. chair with chrome polish . Seat Size:18"x18". Back size:18" overall height 36" with arm M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Air conditioner 1.5 TON SPLIT AC BLUESTAR/ HITACHI/ VOLTAS

Steel Almirah Standard Steel Almirah having dimensions of 2.5 m x 1.20 m x 0.5 m with 18 SWG along with cupboard as well as as per IS 3312-1984 made of MS sheet 18 SWG , Five compartments adjustable type ,Good quality handle , Fitted with lock & key. with at least 5 shelves. M.S. Sheets, Pipes & angles ISI marked WOODITALIA/ XEUNS/GODREJ

Wax bath (medical) Internal wax tank made out of stainless steel sheet. The top having aluminum cover and the edges of the bath having laminated wooden rim, works on electricity 220-240V. Provided with special wax immersion type heater and thermostat to control temp. Externally finished oven baked Wax chamber size 50x35x25cm comes with six kg wax. Size MEDIUM Shape Square Weight 10 KG Type PHYSIOTHERAPY Usage Clinical Condition New Thermostat Control YES Operating Voltage 220V AC Immersion Heater 2000 watt 1) Maktrex International 2) Meditech india 3) Physiowell 4) eleif Medical system 5) Physiogears

I. R. Radiator (InfraredRadiator) (medical) light source Infrared,  Floor stand model for IR radiation treatments.  IR bulb of 150w fitted in metal casing with automatic cut off timer of 15 minutes.  Adjustable arm permitting wide range of adjustments. Mounted on wide base with ball earing casters. 1) Ace Heat Tech 2) Generic 3) Ranzix 4) Jyxka 5) Gsaknc

Electric Muscle Nerve Stimulator machine (medical)  Galvanic: Continuous well filtered D.C. up to 135 volts for a maximum of 0-75 mA load.  Interrupted: Pulse duration- 0.01, 0.03, 0.1  Galvanic: 0.3, 1.3, 10, 30, 300 m second.  Frequency: 6, 18, 30, per minutes 1, 3, 5, 10 30, 50, 100 per sec.  Surged: Faradic pulse of 0.6 m sec duration.  Faradic: Contraction duration: 2-4 second.  Faradic: Comprise of 80 pulses per second, each pulse of 0.6 ms Width.  Accessories: Inactive & Active Plate Electrodes. : 3, Ball tip Electrode with Handle.: 2 pair, Electrodes Wire

Battery (medical) 6 V & 12V- of 4.5 AH Capacity 200 voltage - 12 V Battery Type Inverter Battery/ SMF Lead Acid Battery Usage Industrial Capacity (Ah) 200 Ah Material Hard Rubber

Battery Eliminator (medical) 6 V, 9 V, 12 V-- Output Voltage 12V DC Input Voltage 220 V Ampere 2 Amps Design Compact Display Type Analog single phase

Traction set (Traction table & Traction Weight Machine) medical A set of replaceable slotted weights with carrier (a) IMI : 2760 for Cervical Traction 9 Kg set (b) IMP : 2762 for Pelvic/Lumber Traction 20kg set Traction machine works on solid-state circuitry with reliable, silent & smooth geared motor. Traction Force: Direct Pulling 05 to 45 kg in twelve steps. Maximum Traction Force: With Doubler Pulley up to 90kgs. Hold Time:00-99 Seconds, adjustable in 1 Second Step. Rest Time:00-99 Seconds, adjustable in 1 Second Step. Treatment Time: 00-60 minutes, adjustable in 1 minute Step. Alarms: At the end of treatment time. Safety: Patient safety switch provided with Alarm (Audio & Video). Power Supply: 220-230 V AC. Frequency: 50Hz. Mounting: Can be mounted on Table or on Wall Mode: Static, Intermittent, harmonic Hold Time: 1 Sec.-99 Sec. Rest Time: 1 Sec.-99 Min. Alarm: At the end of treatment and while activation of patient switch. This machine is to use for clinic purpose Package Content- Machine, Cervical Collar, Spreader Bar, Pelvic Belt, Main Cord, Patient Safety Switch, Fuses. 1) Medgears 2) Medansh 3) Physiomodalities 4) Physiotrack 5) Physiogears

Apparatus for various exercises- Shoulder Wheel (medical) All steel constructed 100 cm dia wheel with calibrated sensitive resistance mechanism, resistance should be controllable from zero to maximum. The 360 degree scale enables degree of revolution to be read from either direction. Arc of motion can be varied. Fitted with attachment to raise or lower the wheel at the desired higher for each patient. 1) India Medico Instruments 2) ALBIO 3) Physiogears 4) Rebalance India Wall 5) Apex Digital 6) Physioactive

Shoulder pulley (medical) Size Standard Usage Clinical, Hospital, Personal Type Exercise Equipment Age Group 16 to 80 years 1) Physiowell 2) ACCO 3) Rebalance india 4) Physiotrex 5) AcuproHealth Care System 6) Aaram 7) IMI

Wall ladder (medical)  Ideal for progressive range of shoulder motion.  Made of polished teak wood having 30 numbered steps.  Complete with wall fixing hardwar 1) Tycoon Physio Solution 2) Rebalance 3) Physiotrex 4) International Surgical Equipment

Swiss ball (medical) Material rubber Shape round Weight 2kg Exercise Type Flexible 1) Cosco 2) Boldfit unisex 3) Rhymer 4) Birdline 5) Speed Fitness 6) Deoxys

Pronator - Supirator exercises (medical)Bright laminated Six wooden discs & Six metal ring slide smoothly along colored wire maze, mounted on a laminated base. Convenient way to build range of motion, arm, wrist, hand and finger proficiency 1) Ultrahealth port 2) Physio Care Device

Durra mats (medical) Material TPE Color Blue Brand Yoga Gym Packaging Type Bag Size :- 182 X 61 X 8 CM Thick - 8 mm 1) Health & Fitness Collection 2) KOBO 3) Solara 4) Shreeram Enterprises 5) Apex Enterprises 6) Prosource Fit 7) Xeuns

IFT (Interferential Therapy) machine (medical) Features Digital Types Portable Weight 2 Kgs Frequency 2 KHz, 4KHz, 6KHz, 8KHz, and 10KHz 1)Bharat Medical Systems 2) Physiogears 3) Medansh 4) Physio Track 5) India Medico Instruments 6) Dr. physio 7) Xeuns

TENS (Trans Electronic Nerve Stimulator) machine (medical)  Pulse frequency range : Variable 5 HZ to 120 HZ  Pulse width duration range: Variable 50 µsec to 800 µsec  Output mode : Continuous and Pulsed  Timer: 0-15 minutes pre settable with inner time adjustable up to 99 minutes and auto cut off with beep sound.  Dimension: L 29 cm X B 21 cm X H 9.5 cm  Weight: 2.5 Kg 1) Physiogears 2) Medansh 3) Physio Track 4) India Medico Instruments 5) Dr. physio

Ultrasonic machine (medical) Material Metal Body Timer Electronic timer 0 to 99 minutes with digital display Automation Grade Automatic Number Of Channel 2 Therapy Modes 4 pole Interferential therapy,4 pole vector Interfrential therapy 2 pole Interferential therapy. Voltage V 220V Warranty 1 Year Dimension 40cm x 29cm x 24cm Weight Kg 6.5 Kg Portable Light Weight Unit Treatment Time 0-10 Cable Length 6 Feet Mains Voltage 220 V Country of Origin Made in India Programmes 45 with digital Display OPERATING FREQUENCY 230 Volt AC/50 Hz Out Put Type 100% isolated Medium Frequency 4 Khz & 2Khz Out put Two separate output CH-1 & CH-2 Out put Current 0 to 100ma : 0 to 100ma Out put Freq. It can be varied in 0-150 Hz constant mode by using beat-freq.Up/down keys Display Green colour seven segment display Scan patterns Rectangular,Trapezoidal & traingular ens Unit : Output Channel 2 Frequency Ultrasound Unit: 1Mhz Ultrasonic nominal Frequency : 1 Mhz Pulse ratios : 1:1,1:4,1:7,1:10 reatment time 0 to 6 Minutes Display Accessories 4 IFT wires ,4 IFT Electrodes ,1 US Wire ,1 US Applicator ,1 Main Cord ,2 MS Wire ,2 MS Electrodes, Type Of Tens Unit Combination Frequency 1MHz and 3MHz 1) MEDGEARS 2) Physiogears 3) Physio Track 4) Narayani Traders

Weight cuffs Material Neoprene Weight 500g - 1 Kg -2 kg Packaging Type Box Usage/Application Exercise 1) Physio Life India 2) neulife store 3) Aurion 4) Zustle 5) Dr. Aedass 6) Physiowell

Hydrocollator Pack (medical) Can be used with Custom Terry Covers or Vinyl Terry Cover Sets, sold separately. Moist hot packs provide up to 30 minutes of deep, moist heat and can be reused for hundreds of treatments. Made from high quality material 1) Physio King Surgicals 2) Physio Future International 3) Narayani Physio 4) Piyush Lifescience

Quadriceps Chair (medical) Usage/Application Clinically/ Medical Frame Material MS Height 3 feet Weight 5 - 6 kg Seat Material Leather 1) N Tech Medical Systems 2) S.K. Enterprises ATS 3) Visions 4) Health Care Device 5) Physiowell 6) Narayani Traders

Harihar Trading Company