Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹50.8 L+₹1.4 L (2.76%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹55.2 L+₹5.8 L (11.6%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹98,600
Closing Date
13 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
PROVN OF CERTAIN SANCTIONED INCLUDING MINOR WORKS AT AFTC AF STN JALAHALLI
2023_MES_630739_1
8836/E8
Open Tender
Civil Works
Item Rate
151 days
Jalahallii
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT JALAHALLI PUBLIC FUND ACCOUNT
₹98,600
8 Feb 2024
8 Dec 2023
16 Jan 2024
8 Dec 2023
13 Jan 2024
22 Dec 2023
8 Dec 2023 - 15 Dec 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft type of soil complete all as spfd.
Rolling and consolidating formation surfaces in cutting to the required gradient and camber including filling in depression and hollows, watering, levelling etc., complete using hand roller 0.2 to 0.5 tonne capacity.
Material and labour for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered, rammed to a true surface complete all as specified and directed.
Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base floor of hard standing finished even and rough to receive the top layer and all as specified and directed.
Material and labour for cement concrete 1:4:8 type D-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even.
Material and labour PCC (1:2:4) type B1 using 20mm graded aggregate in base/ floor of hard standing finished even and fair without using extra cement and all as specified and directed.
Material and labour for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade A i.e. (bitumen & Sand)
Supply and fixing for 110 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all all as specified and as directed.
Supply and fixing for 160 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all all as specified and as directed.
Material and labour for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested;in cement concrete 1:3:6, Type C2 (using 40mm graded stone aggregate) for 160mm dia pipes complete all as specified and as directed
Material and labour Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching for 150mm dia as required all as specified and as directed
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation, etc and getting out hard/dense soil all as specified and as directed
Material and labour for Cement concrete, type D2 , 1:4:8, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed
Material and labour for Plain cement concrete type B1, 1:2:4 using 20mm graded stone aggregate as in coping, benching and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed
Returning, filling in hard dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed
Removing excavated material of hard dense soil not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed
Material and labour for providing precast cement concrete 1:2:4 type B1 SET IN cm 1:4 using 20mm graded stone aggregate as in cover slabs including necessary form work etc., complete all as specified and directed
Material and labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed
Material and labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 all as specified and directed
Material and labour rendering 15 mm thick brick walls with CM 1:4 finished even & smooth without using extra cement all as specified and directed
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth ground, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and all as specified and directed.
Material and labour for type B1 1:2:4 20mm aggregate) as in Foundations, including rafts, footings, foundation concrete, mass concrete complete all as specified
Supply and fixing for Rolled mild steel in Staging for Water tank Fe 410 -W (Gde- E- 250) quality-B staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. all as specified.
Supply and fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. including necessary cutting, drilling, welding etc and bending to swan neck shape as required and drilling holes notching for wires etc conforming to Fe-410- W(Gde- E-250) quality- B
Supply and fixing Rotational moulded Polyethylene water storage tank - 1000 liters capacity (cylindrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.
Material and labour for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified.
Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in walls ceiling or laid in floors including socket/union /tee complete all as specified. .
Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in walls ceiling or laid in floors including socket/union /tee complete all as specified. .
Supply and fixing 20 mm dia ball valve with wheel screwed both ends for CPVC pipe all as directed.
Supply and fixing 25 mm dia ball valve with wheel screwed both ends for CPVC pipe all as directed.
Material and labour for Bib taps cast copper alloy fancy type chromium plated 15mm bore fixed complete
Supply and fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe Overall Size: 36" x 20" x 8", Bowl Size: 20" x 16" x 8"
Supply and fix PVC flexible waste pipe 32mm dia,min 60cm length complete all as specified and as directed.
Supply and fixing of stainless steel utensil rack of size 24" *24 " *10" including necessary fittings fixed to the walls complete all as specified
Supply and fixing stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete
Supply and fixing PVC connection 15 mm bore, 450 mm long complete with both ends unions.
Supply and fixing 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement
Supply and fix 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.
Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.
Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed.
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 110 mm
Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm
Supply and fixing for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding doors including locking arrangements with handles, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note: Hinges are to be provided wherever required.
Material and labour for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to Aluminium frame work and all as specified and directed.
Supply only 12mm thick Veneered particle board, solid core, exterior grade, with decorative face veneers for both faces and all as specified and directed.
Supply and fix 5 mm thick plain glass pane to the aluminium partition of any size etc complete
50mm Frame Based Sharing Workstation. Supply and Fixing of modular workstation, with the following specifications (overall dimension of the workstation : 3000mm Length X 1200mm Width X 1200mm Height as shown in the drawings) 50 mm Thick Tile Based Ms frame with Aluminium Trim Partition of 1200mm Ht. with powder coating finish. (Grommet Hole above the table top), 50mm thk frames made out of MS CRCA sheetof thickness 1.00 mm with powder coated and top, sides fixed with Aluminium trims and junctions with PVC caps. Along with 25mm thick BSL PLPB Gable end Above table top provided with 9mm fabric or writing tile on outer side and inner side of workstation. below the table top bottom tiles finished with 9mm Prelaminated tiles with approved colour. LEG (Ms powder coated 40sq tube leg of 1.60 mm thickness), SKIRTING (To have MS powder coated skirting as per the company standard), Table Top (Table top made out of 25mm thick prelaminated particle board of width 600mm with 2mm thk PVC edge band finished as per approved) Computer Key Board with suitable tray (02 Nos) in each cabin fixed with screws to telescopic channel of suitable size (PVC Key Board Tray mounted below the table top), All the members connected to each other by the means of stainless steel cleats/fixed with brass screws etc Pedestal with 2D1F drawers :- (Product Dimensions: 600mm(H)x400(L)x450(D) Primary Material: 18mm Engineered wood with 2mm machine edge banding Drawers: 2 Equal drawer 1 File drawer with 1 lock), fixed with screws to telescopic channel of suitable size , 75mm Stainless Steel Handles.
50mm Frame Based NON Sharing Workstation. Supply and Fixing of modular workstation, with the following specifications (overall dimension of the workstation : 1500mm Length X 1200mm Width X 1200mm Height as shown in the drawings) 50 mm Thick Tile Based Ms frame with Aluminium Trim Partition of 1200mm Ht. with powder coating finish. (Grommet Hole above the table top), 50mm thk frames made out of MS CRCA sheetof thickness 1.00 mm with powder coated and top, sides fixed with Aluminium trims and junctions with PVC caps. Along with 25mm thick BSL PLPB Gable end Above table top provided with 9mm fabric or writing tile on outer side and inner side of workstation. below the table top bottom tiles finished with 9mm Prelaminated tiles with approved colour. LEG (Ms powder coated 40sq tube leg of 1.60 mm thickness), SKIRTING (To have MS powder coated skirting as per the company standard), Table Top (Table top made out of 25mm thick prelaminated particle board of width 600mm with 2mm thk PVC edge band finished as per approved) Computer Key Board with suitable tray fixed with screws to telescopic channel of suitable size (PVC Key Board Tray mounted below the table top), All the members connected to each other by the means of stainless steel cleats/fixed with brass screws etc Pedestal with 2D1F drawers :- (Product Dimensions: 600mm(H)x400(L)x450(D) Primary Material: 18mm Engineered wood with 2mm machine edge banding Drawers: 2 Equal drawer 1 File drawer with 1 lock), fixed with screws to telescopic channel of suitable size , 75mm Stainless Steel Handles.
Material and labour for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as in foundation filling and for mass concrete and all as specified and directed.
Supply only of chain link fencing MS galvanised square wire mesh of size 50mm X 50mm, dia of wire 4mm including line wires, to any type of standard rails, straining bolts, etc all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire etc all as specified and directed.
Supply and fixing Flat iron welded or jointed in connection with framed work including securing bolts and all necessary drilling, bolting or reverting and similar work conforming to Fe-410-0 complete all as specified.
Supply and fixing MS round bars 10 mm dia and over Fe 290 (Gde - E-165)cut to length bent to shape required including cranking, bending spirally, hooping for columns, hooking ends and all as specified and directed by EIC.
S &F Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long
Supply and fixing framed work as in doors or gates of angle, tubes or other section with gusset plates, rails, braces, guard bar etc., complete, to be prepared for hanging or sliding with and including hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete
Supply and fixing Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed
Supply and fixing using sainik 710 BWP 19mm plywood incl decorative laminates on both faces of exterior grade FACTORY MADE as in partition,cupboards,drawers all as specified and directed
Supply and fixing MS chromium plated 25mm dia heavy duty curtain rods and all as specified and directed.
Supply and fixing MS chromium plated 25mm dia heavy duty curtain brackets
Material and labour for Complete removal of existing treatment, using mechanical sander with internal dust extraction system ,preparation of old surfaces for further coat on walls all as specified
Material and labour for priming the surfaces with Chalk whiting, on old plastered surfaces, prepara-tory to distempering
Material and labour for preparation of primed surfaces of wall, Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
Material and labour for Anodised aluminium side hung door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
Surface excavation n.exc 30cm deep and averaging 24 cm deep and getting out in soft soil complete all as spfd.
Material and labour for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed.
Material and labour for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over sand cushion with grey cement and no pigment and all as specified and directed by Engr-in-Charge. Note Sand cushion shall be measured separately under appropriate item .
Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.
Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane and all as specified and directed.
Material and labour Rolled sections/rect tubes as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W (GdeE-250) quality
Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.
Material and labour for kerb stone precast with PCC (1:2:4) type B1 using 20mm graded aggregate finished even and fair without using extra cement and all as specified and directed.
Supply and fix wash basins, vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed
Supply and fix 15 mm bore fancy type pillars taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.
Material and labour soakage well 2.4 meter dia and 3 meters deep below inlet pipe level including excavation and earth work in any type of soil PCC 1:3:6 in foundation brick work in honey combed and in cement mortar, filling brick bats, M25 RCC slab with RCC manhole cover factory made complete all as per TD of CE AF BZ
Material and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sum drawing through in and including PVC conduit size of not less than 20mm on surface of wall including proven of PVC box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sum for One 2/3 pin switch socket point controlled by 5 Amps switch on Independent board.
S&F wall mounted fan 450 mm sweep, power input 100 watt, 1400 RPM, air delivery-75 CMM, single phase 230 volts high performance motor with over heat protection world class styling & finish, facility to control wind & nature mode, aerodynamically designed balanced AS blades including fixing arrangement on wall including taking down existing one writing MES No with synthetic enamel paint all as specified and directed. Make:- Havells / Bajaj / Polar.
Supply, fixing and testing AC Load Manager for auto cut operation for setting time of operation suitable for Split type AC of 1.5/2/3 Ton capacity, all as specified and directed.
Material and labour for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size of non metallic rigid PVC conduit and all accessories fixed to wall/floors along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor shall be measured as one length. Make:- Havells/ Polycab/ Plaza.
Supply and fix single pole and neutral encloser with a two pin and earth plug socket complete with one single pole MCB of 20 Amps, C Curve, 10 KA rupturing capacity. Make Indoasian/Standard/ Legrand
Supply and fix Modular Switch,1 Module,16 Amps &Socket outlet 2in1, 6/16 Amps,2 Module,230 Volts,AC including modular metal flush box and modular cover plate with frame (inner & outer) 3 module complete all as specified and as directed. Make: Legrand (model-Arteor), ABB (Trivsha), Anchor (Penta)
Supply and fix MCB single pole 6 to 32 Amps 240 volts,'C' curve, 10 KA rupturing capacity including connection complete all as specified and as directed. Make Indoasian/Standard/ Legrand
Material and labour for wiring for circuit complete sub main wiring with 2 X2.5 sqmm single core PVC insulated, unsheathed FRLS 100 Volt grade multi stranded copper conductor cable drawn through and incl suitable dia rigid PVC conduit and accessories complete fixed surface to wall/roof/ceiling etc and incl 2.5 sqmm single core wire PVC insulated, unsheathed FRLS 1100v grade multi stranded copper conductor cable as earth continuity conductor etc including taking down existing sub main wiring of any size and all as specified. Note :- Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Make:- Havells/ Polycab/ Plaza.
Supply, installation, testing & commissioning of maintenance free chemical earthing system comprising 17mm dia copper bonded rod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducing liquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation including taking down existing one all as directed. Make : Model HTSP 317 of safeTrode or equivalent in OBO Betterman/ FURSE/ERICO.
The quoted rate is deemed to be included the following :- (i) Prior to installation of maintenance free chemical earthing, soil resistivity test to be carried out at the location where earthing work to be done in presence of Engr-in- Charge/JE (E/M),user and the report has to submit to Garrison Engineer with recommendation of manufacturer, if required additional interconnection of earthing (not more than 04 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testing and submission of report with recommendation deemed to be included in the quoted rate.
(ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors.
(iii) Rate of earth energizer compound of 25 Kg of 02 bags and earth resistance reducing liquid 10 litre per cane for each pit deemed to be included in the quoted rate.
(iv) Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor before commencement of work.
(v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH valve should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete.
(vi) Copper strip of size 20 x 3 mm should be fixed on proper post insulator at the instrument end ( copper strip will be measured and paid separately).
(vii) Testing of earth shall be carried out in presence of departmental and user representative and report shall be submitted to Garrison Engineer duly signed by all concern.
(viii) Earth resistance tester will be provided by the contractor. Tester should be calibrated from authorised company/ lab.
(ix) Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintened duly signed by all concerned. After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained.
(x) The contractor shall given a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion.
(xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock.
(xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is mainained.
(xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing per each earthing shall be retained from payment due to the contractor for the guarantee period.
(xv) The connection clamp shall be permanentlly welded to the copper bounded rod to avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination.
(xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm.
(xvii) The contractor shall submit CPRI India certified document for copper bonded rod to ensure genuity of material.
(xviii) Sign board of mild steel 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer showing result of earthing should be fixed near the earth pit after completion as directed by engr -in- charge.
(xix) Earth work such as auguring and making good the surrounding area shall carried out in any type of soil.
Material and labour for Copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing one all as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.
Material and labour for Earth pit cover made of heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 9.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm dia for each electrode pit complete including taking down all as specified and directed. Make : Model SEPC 250 of SAFE TRODE/ Electrogrip Model/ EGTEK3LC of ISG Global or equivalent in OBO Betterman/ ERICO. Note :- The contractor shall submit load bearing capacity certificate from the manufacturer.
Supply and fix in replacement copper strip 20 X 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground brazing at each joints between strip including saddle/Ceramic insulator/PCC block where required. all as directed by Engineer-in-Charge.
Supply and fixing in repair test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm die 25mm long hex. head screw all as specified and directed.
Supply and laying copper bonded round conductor rod of 10mm for connecting the earthling pits together using exothermic welding joint complete all as specified and directed.
M B Patel and Sons
M/S AMRITHESH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .