Annual Maintenance Kanda to Moolkoti road km. 4/00 to 13/240 (SH Providing renewal coat of 30mm thick bituminous concrete in km. 8/00 to 10/00

Amount

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kilogram per square metre on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per techanical specification Clause 503 ( Five hundred three) including carriage of material with in all leads, lifts and as per the direction of Engineer-In- Charge.

Providing and laying 30mm (twenty five milimetre) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 to 5.60 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No.508 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 (Five Hundred point Four) premixed with bituminous binder, transported to site upto a lead of 1000 m ( One Thousand Metre) laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.