6 HEAD PNEUMATIC TESTING MACHINE FOR PIYALA LPG BOTTLING PLANT

6 HEAD PNEUMATIC TESTING MACHINE AT PIYALA LPG BOTTLING PLANT Installation, testing and commissioning of One no. of 6 head pneumatic testing machine including civil work for the structure foundation as per the specifications of the tender to be done as per direction of site engineer including charges of labour, tool and tackles, accessories, shuttering, scaffolding etc. to complete the job in all respect as per direction of site engineer. The 6 head pneumatic testing machine should be designed to do pneumatic testing of 6 nos. of 14.2 Kg. capacity in one cycle. As per LPG Manual clause no. 9.21 9.21 PNEUMATIC TEST 9.21.1 Each cylinder after having fitted with the valve shall be tested for leakage by subjecting to an air pressure of not less than 12 kg/cm2 immersed in a water bath for a period of minimum 60 seconds (as per IS 16054) and shall show no leakage from the body of the cylinder and the joint between the valve and the bung. This test shall be carried out after fixing the safety cap on the valve. Air pressure for the pneumatic operation of the machine and the testing pressure air will be provided by BPCL. The successful vendor will have to abide all the clauses of BPCL including hot or cold work permits as required during the commissioning of the machine The 6 head pneumatic testing machine shall be handed over to BPCL after successful commissioning and the successful bidder must give guarantee of the machine for one year and provide support or required spares in case of any problem. OK