ED/17/PANDG/25-26

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. Ref : PWD (Bldg), w.e.f- 01.11.17, Page no 10, Item no - 1(a)

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge Ref : PWD (Bldg), w.e.f - 01.11.17, Page no 12, Item no - 13

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety Ref : PWD (Bldg), w.e.f- 01.11.17, Page no-26 Item no - 10(i)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(c) 20 mm thick plaster Ref : PWD (Bldg), w.e.f -01.11.17, Page no-189 Item no - 1(ii)(b)] & 3rd corri -addenda

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. Ref : PWD (Bldg), w.e.f -01.11.17, Page no-196 Item no -8(b)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) c) Super Protective 100% Acrylic Emulsion. Ref : PWD (Bldg), w.e.f -01.11.17, Page no-197 Item no -17,C

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Ref : PWD (Bldg), w.e.f -01.11.17, Page no-2 Item no -2(a)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd loor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m Ref : PWD (Bldg), w.e.f -01.11.17,Page no- Item no -2(a)

Painting with ready mixed red lead paint of approved make and brand : i) Two coats Ref : PWD (Bldg), w.e.f -01.11.17, Page no-202 Item no -

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) Ref : PWD (Bldg), w.e.f -01.11.17, Page no-201,202 Item no -

Filling in foundation or plinth by fine sand inlayers not exceeding 150mm as directed and consolidating the same by through saturation with water, ramming, complete including the cost of supply of sand ,I-4(B) - Fine sand Ref : PWD (Bldg), w.e.f -01.11.17, Page no-2 Item no -4(b)

Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction. (a) Single brick flat soling (thickness 75 mm.) Ref : PWD (Bldg), w.e.f -01.11.17, Page no-14 Item no -11

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL Ref : PWD (Bldg), w.e.f -01.11.17, Page no-43,44

Supplying, fitting and fixing fiber reinforced plastic works as per approved design with glass fiber reinforced plastic moulded skins and a special sandwich core so as to impart monolitaheic composite structure as per approved technology, works in upper rails of railing coloumns, balcony, gates, structural works, sculpture, fountains, landscape etc. fitted and fixed complete a quotation may be invited. Ref : 06/SQN/P&G/2024-25, date - 02/12/2024, commissioner approval date : 18.12.24, Chief auditor approval date : 12.12.2024

Add GST 18%

Add LWC 1%