Repairs to roof treatment and sunken portion in Bldg No. P15/1 to 04, P-16/1 to 04, P-101 to P-120, P-149 to P-156, P-24, P-26, P-70 and P-72 at Old Mil Stn Kapurthala under GE Kapurthala

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour, with 10 mm thick cement screed bed (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) with epoxy filling in joint complete all as specified and directed.

Demolition of brick / block masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick work or concrete surfaces including racking out joints all as specified.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc; complete all as specified and directed. Note:- WPC shall be paid separately.

M&L for 10mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc; complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc; and binding with mild steel binding steel wire (annealed) not less than 0.9mm dia all as specified and directed.