Procurement of Fire Fighting Equipments for CISF in HTPS Kasimpur

Cylindrical shape, upright operation type having capacity 9ltr. Water type (gas cartridge) fire extinguisher as per IS: 15683 / 2006 and amendment 2018 with ISI marked shall be complete with following:-#1) The material for the construction of siphon tube, ap assembly and safety clip shall be of stainless steel (IS: 6913).#2) Gas cartridge of 40 gm capacity shall be as per IS: 4947/1985 with ISI marked and content shall be as per IS: 15222-2002.#3) The inner surface of the extinguisher shall be coated with xy polyester powder coating for anti-corrosion treatment and shall pass all test mention in IS: 15683 / 2006 and amendment no. 1 December 2008.#4) The manufacture shall have the following valid license:-#a) Certificate for manufacturing from BIS, b) Certi ate for ISI mark from BIS##5)Extinguisher should meet all requirement and test as per IS 15683 / 2006 (Reaffirmed 2018).#6) A spare filled gas cartridge should be provided with each Fire Extinguisher#

Cylindrical shape, upright operation type having capacity 9 ltr. Mechanical foam type (gas cartridge) fire extinguisher as per IS: 15683 / 2006 and amendment 2018 with ISI marked shall be complete with following:-#1) The material for the construction of s hon tube, cap assembly and safety clip shall be of stainless steel (IS: 6913).#2) Refill pack of 270 ml AFFF 3 % shall be as per IS # 4989/1985 and it should be provided separately in PVC cans.#3) Gas cartridge of 60 gm capacity shall be as per IS: 4947/1 with ISI marked and content shall be as per IS: 15222-2002.#4) One spare gas cartridge with each extinguisher should also be provided.#5) The inner surface of the extinguisher shall be coated with epoxy polyester powder coating for anti corrosion treatment and shall pass all test mention in IS: 15683 / 2006 and amendment 2018.#6) A spare filled gas cartridge should be provided with each Fire Extinguisher#7) The manufacture shall have the following valid license:-#a) Certificate for manufacturing from BIS# b tificate for ISI mark from BIS# Extinguisher should meet all requirement and test as per IS 15683 / 2006 and amendment 2018#

Cylindrical shape, upright operation type, having capacity 06 KG., Dry Chemical Powder (gas cartridge) type fire extinguisher as per IS: 15683 / 2006 and amendment 2018 with ISI marked shall be complete with following:-#1) The material for the construction of siphon tube, cap assembly, and safety clip shall be of stainless steel (IS: 6913).#2) Inner container shall be M S Sheet confirming to grade any of IS 513, IS 3074 or IS 3601.#3) Refill pack of 90% Mono Ammonium Phosphate base D.C.P. of 06 KG pack shal e as per IS # 14609-1999 and it should be provided in hermetically sealed moisture proof plastic bags.#4) Gas cartridge shall be as per IS: 4947/1985 with ISI marked and content shall be as per IS 15222-2002. One spare gas cartridge should also be provide 5) The inner surface of the extinguisher shall be coated with epoxy polyester powder coating for anti-corrosion treatment and shall pass all test mention in IS: - 15683 / 2006 and amendment 2018#6) The manufacture shall have the valid license for the cert ication of ISI mark from BIS.#7) A spare filled gas cartridge should be provided with each Fire ExtinguisherExtinguisher should meet all requirement and test as per IS 15683##

SPECIFICATION OF 50 KG DCP TROLLEY MOUNTED FIRE EXTINGUISHER#1. Trolley mounted DCP fire extinguisher IS: 16018:2012 (Reaffirmed 2018) 50 kg capacity having ABC powder (as per IS- 14609-1999) with gun metal cap.#2. Extinguishing Media- ABC powder (as per - 14609-1999)#3. Propellant- CO2 cylinder conforming to IS-7285 (cap. 2Kg) as expellant media. #4. Effective discharge - 85% -100%#5. Pressure requirements-# - Test Pressure (Pt)- 1.43 x P ms but not less than 2 Mpa (20bar )#- Burst Pressure (Pb)-2.7 x P ms ot less than 5.5 Mpa (55bar)#6. Copper Tubing or High Pressure Hose - Copper tubing shall conform to bursting pressure of 275 kgf/cm2 or wire braided high pressure hose as per IS 14933:2001.'#7. Discharge Hose:- Discharge hose shall be of braided rubber o VC of nominal bore 19 mm diameter fitted with not less than 5mtr. The hose shall have bursting pressure of not less than 50 kgf/cm2#8. General operating performance requirements -#a) Hydraulic Test:-The extinguisher shall be tested to an internal hydraulic pressure of3.0 MN/m2 (30 kgf/cm'). The test pressure shall be held for a minimum period of two and a half minutes During the test, it shall not show any sign of leakage)Bursting Test:-In case of hydraulic burst test, failure shall not occur at a press

SPECIFICATION OF CO2 EXTINGUISHERS 4.5 KG CAPACITY: ##1. ISI marked CO2extinguisher 4.5 Kg capacity shall conform to IS 15683:2006 & 2018#2. CO2 used in the extinguisher shall conform to IS 15222.#3. The maximum filling density shall not exceed 0.75Kg/L.#4 l be capable of operating reliably with the temperature ranges specified by IS 15683-2006.#5. Minimum effective discharge time and bulk release of discharge shall comply with IS 15683-2006. #6. Shall have a mechanical resistance complying with IS 15683-200 . Shall have been passed internal and external corrosion resistance test as per IS 15683-2006. #8. Shall have been passed tapping test as per IS 15683-2006. #9. Should not retain 10% of the initial charge after discharge.#10. Shall have been passed electric conductivity test as per IS 15683-2006.#11. Steel body should conform to IS 7285 and the base of the body should be of concave shape.#12. The minimum burst pressure shall be 2.7 x maximum service pressure.#13. Shall pass volumetric expansion test as per IS 83-2006.#14. Discharge tubes and discharge horn should pass burst pressure test as per IS 15683-2006. The# discharge horn shall withstand a crushing force of 25 kg. #15. Color of the extinguisher shall conform to shade no 538 of IS 5 and paint shall conform

EXCOT FIRE SERVICE (BID ID -4746058)

J.K.Defence Fire Engg. Services (BID ID -4743288)

Parmaarth Traders (BID ID -4745992)