REPAIRS TO ROOF TREATMENT, SANITARY FITTINGS, TOILETS, GI TUBING, TILING AND BRICK WORK AT COOK HOUSE AND TRG REGT OF ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm thick set and jointed in neat cement slurry nd pointed in coloured cement to match in floor etc incl dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and directed Note : Cement mortar screed bed layer shall be measured & paid separately

M&L for glazed ceramic tiles coloured size 450 x 300 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match incl dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed

M&L for rendering 15mm thick in CM 1:3 as in backing coat plaster on surfaces of brick masonary or stone masonary surfaces complete all as specifed and directed

Dismantling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

S&F Machine cut kota stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing as in skirting complete all as specifed and directed

M&L for granite (of any type)work (table rubbed and polished)20 mm thick in steps,jambs,pillars,cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

M&L for hand cut cudappa stone slab 16 -18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete Note: screed bed layer measured seperately complete all as specifed and directed

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate as in sub base / foundation filling mass concrete complete all as specifed and directed

Taking up or down 20 mm dia tubes galvanized iron and connections and removing/shifting from site incl cleaning for refixing where directed complete all as specifed and directed

All as per above Item No.15.00 but size 15 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of 20 mm dia size complete all as specified and directed

All as per above Item No.17.00 but size 15 mm dia

S&F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of 20 mm dia size complete all as specified and directed

All as per above Item No.19.00 but size 15 mm dia

S&F in repair PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) B-1 dia of outlet 75mm complete all as specifed and directed

S&F repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed and repairs (minimum weight 90 gms) complete all as specified and directed

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. all as specified and directed

M&L for rendering 15mm thick in cement mortar(1:6) on Stone masonry surfaces, concrete surfaces or fair faces of brick work and finishing even and smooth including taking down old cement plaster complete all as specifed and directed

M&L for preparation of plastered surfaces of walls by washing, rubbing down,stopping and applying two coat of oil bound distemper over a coat chalk whitening primer prepatory to distemper on walls.

M&L for rendering 15 mm thick cement mortar on stone surfaces, concrete surfaces or other than fair faces of brick work in cm 1:4 finished even and fair with out using extra cement including taking down old cement plaster complete all as specifed and directed

M&L for Preparation of newly plastered surfaces of any description and applying two coats of cement base paint on walls over a coat of chalk whitening primer complete all as specified and directed

M&L for rendering 05 mm thick (1:3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for three coat of white wash including preparation of new surfaces on ceilings

Demolition of brick work/stone work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed

M&L for Brick works with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specifed and directed

M&L for walling of random rubble uncoursed, well bonded, bedded to solidly hearted built in cm (1:6) complete all as specified and directed

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specifed and directed

Disconnecting existing tanks of exc 500 ltrs but n exc 1000ltrs setting aside(or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position (cleaning, repairing etc measured seperatly)

Dismantling water tanks of capacity Exc 500 Ltrs but n. exc 1000Ltrs and removing to from site or to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltr.

S&F in repairs Ball brass valves, high pressure, with polythene float and flynut for 25 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F for Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Taking down 100/75 mm dia PVC/CI sand cast soil, waste and vent pipes, in any length with or without ears etc in any position

S&F PVC (SWR) pipe single socketed 110mm bore any length with rubber ring joints fixed to wall complete all as specified & directed bore of pipe in mm complete all as specifed and directed

All as per above Item No. 42.00 but 75mm bore

S&F of 75 mm dia PVC(SWR) bends of any radius

All as per above Item No.44.00 but 110 mm dia

S&F of PVC(SWR) branch piece,single(single Y) 110 mm dia equal or unequal

S&F of PVC(SWR) vent cowl of 75/ 110mm bore

S&F 110mm bore PVC (SWR) junction single-Tee (equal or unequal) with access door complete all as specified and as directed.

S&F in repair grating doom PTMT of 100mm dia complete all as specifed and directed

S&F in repairs Vitreous china squatting pan with PVC(SWR) 'P' trap of 125/110 mm bore,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs Vitreous china wash down water closet (pedestal pattern), white including plastic water closetseat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed.

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs with 32mm dia flush pipe complete all as specified and directed.

S&F in repair vitreous chaina wash basin, flat black white, size 550 X 400mm including cutting for and pinning in for bracket and 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connection to drain pipe complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F for Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

S&F in repair vitreous china urinal half stall type white including flushing cistern, flush pipe, waste pipe complete all as specifed and directed

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and directed

S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed

M&L for Providing precast cement concrete louvres and jallies Type B-0 (1:2:4) in CM 1:4, 25mm thick (mea-sured solid), including all mouldings but excluding frame

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid conplast 421 and applying one coat each of Nitoproof 100 & Nitopro 120 on plastered surface . Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC & CI/PVC pipes joint shall be filled/jointed with mixture of cement fine sand and nitoproof 130 and provided hole in the wall & fixed 600 mm long 20 mm dia spout light grade & 1:3:6 C2 filling , floor area of wc upto 1.5 Sqm etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each &removing from site

S&F Solid PVC frame of size 50mm x 95mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, with necessary arragement for fixing of glass for louvers type window/ventilator and additional PVC beading around the frame for fixing of wiremesh, S&F in opening all as specified and directed by Engr-in-Charge

S&F 100 mm Butt hinges,medium weight cold rolled Stainless steel all as specified & directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame exc. 1.5 but n exc 4.00 Sqm each &removing from site

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Sheet glass ordinary quility 3 mm thick nexc 0.5sqm each pane and glazing with oil putty incl hacking out old broken glass (any thickness, size and description) from metal frame including punching or drilling out old glazing pins/springsclips and providing and fixinh new ones. complete all as specifed and directed

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M & L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or sub base

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm

S&F in repairs aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges

Taking down shutters exc 1.00 Sqm but n exc 2.00 Sqm

Taking down shutters but n exc 1.00 Sqm

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b) complete all as specified and directed

S&F IInd class hard wood factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed

S&F 35 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F 30 mm thick Second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm and fixed in aluminium windows, wooden doors etc complete all as specified.

M&L for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of wooden surfaces all as specified and directed by EIC.

S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed

S&F Aluminium alloy anodised barrel tower bolts 200mm long complete all as specified and directed

S&F MS butt hinges 100mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long complete all as specified and directed

S&F 150 mm extruded aluminium alloy handels complete all as specified and directed

S&F 75 mm long medium weight, cold rolled mild steel Butt hinges. complete all as specified and directed

S&F 75 mm extruded aluminium alloy handels complete all as specified and directed

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed

S&F Aluminium anodised powder coated window and ventilator shutter, sliding type without sash bar, alumn section section weighing not less than 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Sheet glass ordinary quality 5.5 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed

M&L for painting with one coat of synthetic enamel paint on old wooden or steel or wall surfaces exc 10cm width or girth including preparation of old surfaces all as specified and directed by EIC.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 75mm thick as in sub base all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement and pigment with rubber moulded glossy finished surface, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade laid over and including 30 mm thick stone dust cushion.

S&F in repair for 18 mm thick PVC sheet prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with white lamination including necessary locking device, catches suitable for kitchen cabinets as in kitchen cabinets incl suitable beading on all edges etc complete all as specified and directed.

S&F 30 mm width flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

M&L for vitrified ceramic tiles light shade 8 to 9mm thick (Square/rectangular) polished, area of each tiles n.exe 0.36 Sqm in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 24,837.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI

M/s Varun Kumar Contractor

Vishal Constructions

A V S Builders

Alpha Construction

SVT ENGINEERS AND CONTRACTOR.

M/S R.K.S. CONSTRUCTION

Bidder Name

Vishal Constructions

A V S Builders

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

Alpha Construction

Srujan Associates

M/S R.K.S. CONSTRUCTION

M/s Varun Kumar Contractor