16/HDA/EC-ELECT/2024 2025 (2nd Call)

Amount

Supply, delivery & transportation of Hot Dipped Galvanized Iron Sheet (G.I. sheet thickness- 3.0 mm) Street Light Pole 9 Mtr. Long Swaged type with single swan neck to be extended up to 1.5 Mtr. at the top part of the pole. This specification covers the design, manufacture, testing at works of 9 mtr long (swaged type) Hot dip GI Steel tubular Pole conforming to IS: 2713, P-I & II)/1980) (Confirming to 410-SP-30) with GI base plate and Single Swan neck arm Bracket and latest amendment if any. The rate should include testing at your works, all taxes and delivery the materials at site, BIS license & Type test report must be submit. (Make-Utkarsh/Bajaj/Shuvam Pole).

Supply and delivery of 1.1 KV grade 2 C X 10 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any. (Make-Havells/Asian Cables/Gloster/Polycab).

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire with the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and supply and fixing of Terminal connector at the suitable location of the pole. Make-L&T.

Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment: HPMV/HPSV luminaries/LED fittings of any wattage.

Supply of HDPE pipe Plb Duct pipe of size 40 mm.

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (2 way)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (6-32 A) Make-Legrand.

Supplying & delivery of 90W LED Street light with pressure die cast Al. Housing IP66 protection, Road way luminarie with High Power LED as per the detailed technical specification. Approved make for LED shall be Nichia/Cree/Osram/Lumileds make LED Chip. System efficiency at luminaries level shall be minimum 120 lumens/watt .LED shall be of Surface Mounted Design (SMD).Life of LED shall be rated at 50,000 hrs. (Make-Bajaj/Philips/Crompton/Havells).

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI /HDPE Pipe/open masonry trench for single, 2, 3, 3½ & 4 core.

Supply & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required. (c) 40 mm dia.

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting.(b) 250 x 250 x 100mm.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.a)Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.

Connection of luminaries with 3C X 1.5 Sqmm pvc insulated FR copper conductor through 9 mtr. Poles from looping box to light fittings as required to be laid with 19 mm dia 3mm thick polythene pipe.

Laying of PVC/GI/MS pipe in UG trench 460mm width x 760mm av. depth including excavation, filling the trench with shifted soil, leveling up and restoring the surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below:

2 Core X 10 Sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc

. 2 Core X 10 Sqmm

Earthing with Supply GI earth Spike ( 1830 X 20 mm ) (Each Pole).(Including Installation)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 6 SWG.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc (0.35 sqm per pole x 5).

Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. (0.35 sqm per pole x 5). (b)Two coats.

GST @18% of Total Amount

CESS @1% (Total Amount including GST)