REPAIR MAINT OF INTERNAL WATER SUPPLY IN JCOS, OR QTRS OF SANJOG CHHETRI VIHAR IN THE AREA OF AGE BR-II UNDER GE (EAST) LUCKNOW.

Amount

S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.

Cutting chases for concealed water tubing and making good to disturbed surfaces in CM1:3, cutting not exc 10cm in girth complete all as specified and directed.

S&F in repair bib tap 15mm dia, chromium plated cast copper alloy with fancy type handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair long body bib tap 15mm dia, chromium plated cast copper alloy with fancy type handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore stop/angle valves chromium plated, cast copper alloy with fancy type handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed..

S&F concealed type 15mm bore stop valves cast copper alloy fancy type, chromium plated, with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes complete all as specified and directed.

S&F in repair 32mm bore Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union complete all as specified and directed.

S&F for aluminium tubular towel rail of superior quality 'D' type 20mm dia 60cm long between flanges as in repair complete all as specified and directed.

S&F in repair CP Shower rose of size 125 mm dia with 15mm bore CP arm, complete all as specified and directed.

S&F in repair 40mm bore waste coupling of PTMT (half or full thread) for sink complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S & F in repairs of 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

F&F PVC low level flushing cistern of 10 Ltr capacity fixed in repair including siphon float valve and rubber cone etc complete all as specified and directed.

S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white fixed in repair including connection to trap and cistern, flush pipe including plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling, PVC waste pipe MS brackets complete all as specified and directed.

Repair only wash basins, Vitreous china (flat back or along back type) any size, including cutting for and pinning in end of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.

S&F PVC connection 15mm dia, with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm dia, with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC waste pipe of standard quality suitable for 32 mm bore waste coupling for WHB/ urinal complete all as specified and directed.

S&F in repair PVC Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair of 15mm bore two way bib tap chromium plated, cast copper alloy with fancy type handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP Jet with flexible tube ccomplete all as specified and directed.

S&F aluminium anodised pegs 6 legs fancy type, all as specified fixed, as in repair, complete all as specified and directed.

Dismantling existing water tanks capacity exc 250 Ltrs but not exc 500 Ltrs, removing from site complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks, white colour, triple layered (cylindrical vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hoisting if required reconnecting & refixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Cleaning of service reserviour of capacity 500 ltrs removing of all sludges, scales, vegetables, cleaning with wire brush, bleaching powder and cleaning of orifice mouth of inlet and out let pipe line including provision of damaged pipe line and accessories complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm thick [square/rectangular] area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl with motif/borders as in floors incl over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed with white cement to match incl with motif/borders as in vertical surface incl over 10mm thick rendering in CM 1:3 complete all as specified and directed.

Taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm MS holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm MS holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) with access door equal or unequal complete all as specified and directed.

S&F for PVC (SWR) floor trap of size 110/75mm bore plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for CP Grating of 100mm dia complete all as specified and directed.

Jointing only for 100 mm bore cast iron pipes & fittings to PVC pipes & fittings, in repairs, with epoxy based repair polymer and making joints leakproof complete all as specified and directed.

Cutting holes into or through in brick walls built in cement mortar area exc 0.15 Sqm but not exc. 0.2 Sqm & making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M & L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed.

S & F for E-board `Everest` or equivalent make 600 x 600 mm and 04mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.

S&F 30mm thick PVC factory made panneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm medium weight, complete all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3, depth of cutting exc half brick but n. exc one brick, complete all as specified and directed.

S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for 0.56mm thick plain aluminium sheeting alloy 31000H4 in flushing of door, complete all as specified and directed.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles, complete all as specified and directed.

M & L for brick work using fly ash brick, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6), complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with including water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint, complete all as specified and directed.

M&L for preparing new surfaces of wall and applying three coat of white wash in any height of building complete all as specified and directed.

QUALITY CONSTRUCTIONS CO

M/S KAUSHIK CONSTRUCTION

M/S Dwivedi Construction Coy