Special repair and renovation of Centralized facilities in Examination Block I at New University Campus

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.0mm thickness (avg.) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved brand and manufacture of required shade & colour complete over a coat of cement primer.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. (Make Asian/Nerolac/Berger)

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws including paneling with pre-laminated particle board with decorative lamination on both sides Grade-I, Type-II, IS:12823 marked Second Class Deodar Wood 35 mm thick including applying a coat of wood primer and then painting with synthetic enamal paint (two or more coats) of approved brand and manufacture (Make Asian/Nerolac/Berger).

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous China Orrisa Pattern W.C Pan of size 580 x 440 mm with integral type foot rests (Make Parryware/Cera/Hindware)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.( Make Hinware/ Cera / Parryware/ Jaguar )

Providing and fixing mirror of superior glass (of approved quality) of Size 2'-0" x 4'-0" with stainless Screws fixed on Plastic Drowel complete as per the direction of Engineer -in- Charge complete Job.

Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms (Make Prayag or Steel Bull)

Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of the inner hinged round grating (Make Prayag or Steel Bull)

Providing and fixing PTMT Angle valve of approved quality and colour. 15 mm nominal bore (Make Prayag or Steel Bull)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively (Make Parryware/Hindware/Cera)

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings. Flat back wash basin of size 630x450 mm (Make Parryware/Hindware/Cera)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Make Parryware/Hindware/Cera)

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms (Make Prayag or Steel Bull)

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106gms (Make Prayag or Steel Bull)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. colour (Make Prayag or Steel Bull)

P& F CP jet with PVC pipe to be fixed with WC of approved quality.

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm of approved quality.

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Make Parry ware /Hind ware/Cera) White colour

Supply of Labour for different works Mazdoor

------------------do---------------- Carpenter II Class

--------------do------------------- Fitter II Class