REPAIR TO COMPOUND WALL FENCING GATE PATH AND HARD STANDING AT AF STN MOUNT ABU

Amount

M & L 15 mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement including taking down cement plaster from brick/stone walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as specified and directed.

M & L brick work with Fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 including demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified & directed.

M & L for preparing old decorated surfaces of walls and applying one coats of cement base paint complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description.

M & L for preparation of newly steel surface of any description over 10cm width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified & directed.

M & L PCC 1:3:6 type C-2 (by using 40 mm graded crushed broken stone aggregate) as in foundation filling and mass concrete complete all as speicicfed and directed.

M & L PCC 1 : 3 : 6 type C-1 (by using 20 mm graded crushed broken stone aggregate) in lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified & directed.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified & directed.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Supplied only chain link MS galvanised fencing any size or type.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards including provission of binding wire

S & F Mild steel screw bolts 5 to 10mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, small end exe 5cm long complete all as specified and directed.

S & F galvanized 2 brand sheet barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strasing bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S & F Round steel bars 6 to 8mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M & L providing precast cement concrete 1 : 2 : 4 Type B1 ( 20 mm graded aggregate) set in cement mortar 1:6 in window or door cills, lintels, steps coping, kneelers, pier caps, columns, post etc. and setting in mortar complete with joints to match.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified.

S & F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified.

M & L Machine pressed precast coloured concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade conforming to IS-15658-2006 with grey cement and pigment including over 25 cm thick sand layer filling under floors, sand cushion or in foundations including watering and consolidation demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 25cm x 25cm x 25 mm thick, set , joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment over screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish all as directed including demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified & directed.

M & L 75 mm thick PCC 1:3:6 Type C-2 ( by using 40 mm graded crushed broken stone aggregate ) as in floors/Pavings/sub base etc complete all as specified & directed.

M.S. ENTERPRISES (BID ID -3506438)