Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.0 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹30.9 L+₹3.5 L (12.7%)Rejected-AOC | L2 | Rejected-AOC L2 Bidder | |
| 3 | L3₹31.2 L+₹3.8 L (13.9%)Rejected-AOC HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L3 | Rejected-AOC L3 Bidder | |
| 4 | Rejected-Technical ROOM NO 262 PART II NEAR SANKER MANDIR GANESH MURTHI NAGAR COLABA MUMBAI 05 | MUMBAI | - | Rejected-Technical Rejected |
Tender Value
₹32.5 L
EMD Value
₹65,000
Closing Date
29 Sept 2022, 6:00 pmClosed
GE PROJECT PANAGARH
GE PROJECT PANAGARH PO - PANAGARH DIST - BURDWAN PIN - 713420 (WB)
REPAIRS TO PATH, APPROACH WAY, CULVERT AND DRAIN ETC AND REPAIRS TO COMPOUND WALL, FENCING AND GATE AND CERTAIN MISC. WORK AT NABAGRAM MILITARY STATION UNDER GE(P) PANAGARH
2022_MES_549078_1
8169/E8
Open Tender
Civil Works
Item Rate
180 days
GE PROJECT PANAGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE PROJECT PANAGARH
₹65,000
Yes
10 Nov 2022
1 Sept 2022
30 Sept 2022
1 Sept 2022
29 Sept 2022
15 Sept 2022
Amount
Demolition of brick works/stone masonry work built in cement mortar including all quions, arches, pillars etc.
M&L for flyash brick work sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) all as specified.
All as per item No 2 above but except brick.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick walls built in cement mortar (1:4) all as specified.
M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:6) and finished even and smooth , using extra cement complete all as specified.
M&L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) and finished fair and even complete all as specified.
PCC (1:2:4) type B1 using 20 mm graded aggregete as in surface channel or drain
M&L PCC 1:3:6 type C-2(40 mm graded aggregate) in foudations,filling and mass concrete.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Add or deduct for each 25mm girth or part thereof over or under 30 cm ditto
M&L applying two coat of cement base paint, first quality, with white cement priming coat incl preparation new plastered surface all as specified and directed. Make:- Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints
Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key and scrubing down with water etc.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level)
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base concrete.
M&L for PCC 1:2:4 type B1using 20mm graded stone aggregate as in coping, benching etc incl necessary form works etc all as specified
M/L Precast cement concrete solid block kerb stone of PCC 1:2:4 type BI ussing 20 mm graded stone agg. Including weathring or chamferd Angles etc.and setting in CM. 1:6.
M/L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade etc complete. Make:-Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope \ Mehtab Tiles / Nitco
M/L sand cushoning as in floors and the like, including watering and consolidation and all as specified and directed.
M&L for 40mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, finishing surface even and smooth without using extra cement all as specified and as directed.
M&L for PCC 1:2:4, Type B1, 100mm thick using 20mm graded stone aggregate, concrete surface furnished evern and smooth without using extra cement as in flooring.
Demolition concrete of any description and in any position not other wise specifically provided for(cement concrete is reinfoced (reinforcement cut as required to facilitate demolition).
M&L 75mm thick PCC (1:3:6) type (using 40 mm graded crushed stone aggregate) as in plinth protection, finished fair and even, complete all as specified and directed.
M&L PCC 1:2:4 type B1 (using 12.5 mm graded aggregate) 25 mm thick as in flooring all as specified and directed.
Refixing of interlocking tile 60mm thick including sand cusing and taking down complete.
M & L 150mm thick cement concrete work in pavement/hard standing of flexural strenth 40kg/per Sqcm in field using, 400Kg of cement per Cum, complete all as specified and directed.
Forming contraction (dummy) joints 65 mm deep x 10mm wide filled with sealing compound grade A. Make:- STP / Choksy Chemicals / Tikitar / Hindcon Chemicals Ltd.
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 20mm screed bed in CM(1:6) complete all as specified and directed. Make:- Anjali Tiles / Ultra Tiles Pvt Ltd. / Terra Firma / Ecco Scope \ Mehtab Tiles / Nitco
M&L preparation of newly plastered surfaces of work and applying three coats of white wash on wall all as specified and directed. Make:- Birla white / Swastik Industries / Rayalseema Chemicals /
Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate bed to drain pipes including cradal against the sides of pipes after they are laid and tested for 150mm bore NP2 pipes complete all as specified and as directed. Make:- Indian Hume pipe / Any other Reputed make conforming to IS, as approved by the GE.
Reinforced concrete pipes, 150mm class NP2, laid and jointed complete with collars. Make:- Indian Hume pipe / Any other Reputed make conforming to IS, as approved by the GE.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed gound
Excavation in post holes ( or similar holes) in soft/loose soil each n exc 0.50 cum getting out returning filling in and ramming, watering and removal of soil to a distance of 50 mts, etc complete.
M&L for providing reinforced cement concrete type B1, 1:2:4 (20mm graded agg) in pre cast fencing posts, straining or terminal posts, struts etc. for fencing average sectional area n exc 100 Sqcm with or without chamfered angles and flat, splayed, rounded or mitered tops as directed and fixed.
M&L mild steel work for posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc, flat iron fillets for recuring wire mesh, nosing to steps, hand rails, blalusters etc. and similar work conforming to Fe-290 Gde E-165
S&F mild steel screw bolts 5 to 10 mm dia machine made with hexagonal or squar heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washer and one hexagonal or square but exc 5 cm but n exc 10 cm long. Makle:- L&T / HMT / any other reputed make, conforming to IS, as approved by the GE.
Dismantling of chain link fencing of any description any type not other wise describe for
TMT steel bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all specified.
TMT /Round steel bars 6 to 8mm dia as in reinforcement cut to length, bent to shape required including cranking, bending spirally or hooping for chain link fencing columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all specified.
Ditto as above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified
Supply only chain link MS galvanised fencing, conforming to IS, any size or type all as directed. Note:- The weight of mesh shall be ascertain at site by the Engineer-In-Charge and entered in MB duly certifying the weight for each lot, before paying the RAR.
Fixing only chain link fencing including line wires, any mesh size and type of standard, rails, straining bolts, etc including provision of binding wire all as directed.
M&L for preparation of surface of steel and iron of any description over 10 cm width or girth, not oterwise described and applying two coat of synthetic enamel paint, first quality, over a coat of red oxide, zinc chcome primer complete all as specified and directed. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd
M&L for preparation of old surface of concrete of any description over 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of primere complete all as specified and directed. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd
Dismantling of wrought iron or mild steel works of any description net other wise provided for etc all as directed.
S&F mild steel framework as in grills, gates steel door's etc with ends of bars houlderd or revited or forged in to spikes, etc and similer works confirming to FE 290 Gole E 165 etc all as specified.
M/L Providing precast cement concrete louvres and jallies, type B0 using 12.50mm graded stone aggregate, 35mm thick set in cement mortar 1:4 (measured solid), including all mould- ings ,frame, etc complete
M&L for RCC 1:1.5:3 type B1 nominal mix (using 20mm graded agg) in beams, cantilevers, bressummers, lintels over 1.5 m span
SCHEDULE OF CREDIT
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
M/S New Builders Corporation
M/S KUMAR AVINASH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .