REPAIRS MAINTENANCE OF GI WATER SUPPLY DISTRIBUTION PIPE LINE GI VALVE AND VALVE PIT OTHER ALLIED MISC CONNECTED WORKS AT ASCONE NODE AND JALIPA MIL STN UNDER GE ARMY BARMER

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI pipe etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan area and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick with excavated soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Taking up or down DI pipe line including fittings and connections of 150mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed .

Taking up or down GI pipe line including fittings and connections of 100mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed .

Taking up or down GI pipe line including fittings and connections of 50mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed.

Taking up or down GI pipe line including fittings and connections of 40mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed.

Taking up or down GI pipe line including fittings and connections of 25mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed.

Taking up or down GI pipe line including fittings and connections of 20mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed.

Taking up or down GI pipe line including fittings and connections of 15mm bore and cleaning, cutting / threading of serviceable pipe for relaying complete all as specified and directed.

Relaying of DI pipe 150mm bore laid in trenches after clearing the blockages in pipe including jointing and connecting complete all as specified and directed. Note :- DI pipe obtained from taking up or down here-in before shall be re-used in this item.

Relaying of old GI water tubing of 50 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

Relaying of old GI water tubing of 40 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

Relaying of old GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

Relaying old GI water tubing of 20 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed. Note for Sl item No.12 to 15 :- GI tubing obtained from taking up or down here-in before shall be re-used in these items.

Laying only, jointing and connecting 50 mm bore galvanised steel water tubing medium grade laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc,complete all as specified and as directed . Note :- GI tubing will be issued under schedule"B" free for fixing.

M&L GI water tubing of 100 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

M&L GI water tubing of 50 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

M&L GI water tubing of 40 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

M&L GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

M&L GI water tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

M&L GI water tubing of 20 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in trenches including testing complete all as specified and as directed.

M&L GI water tubing of 20 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

M&L GI water tubing of 15mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S&F in replacement of 50 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

S&F in replacement of 40 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

S&F in replacement of 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

S&F in replacement of 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

Construction of valve pit of inner sizes 1500 x 750 x 1500mm stone masonry construction built in CM (1:6) over 150mm thick pcc (1:4:8) type D2 foundation complete with mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and shown on drawing. All internal surface and external surface upto 15 cm below normal ground level of stone masonry shall be plastered 15mm thick in cement mortar 1:4, finish fair and even including necessary excavation and earth work in any type of soil and PCC work all as per TD drg including dismantling of old valve pit complete all as specified and as directed.

Cutting of existing road / hard standing to a width of 40cm and depth not exceeding 25cm for laying of GI pipe including returning and filling, spreading levelling, watering and well ramming in layers and making good disturbed surfaces with PCC 1:2:4 type B1 for top 100mm thick complete all as specified and directed.

S&F in replacement of Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed.

Supply, installation, connecting and testing sluice valve 200mm bore cast iron body (Long Body) class-PN-1.6 with flanged ends ,conforming to IS:14846:2000, having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old sluice valve complete all as specified and as directed.

Supply, installation, connecting and testing sluice valve 150mm bore cast iron body (Long Body) class-PN-1.6 with flanged ends ,conforming to IS:14846:2000, having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old sluice valve complete all as specified and as directed.

Supply, installation, connecting and testing sluice valve 100mm bore cast iron body (Long Body) class-PN-1.6 with flanged ends ,conforming to IS:14846:2000, having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old sluice valve complete all as specified and as directed.

Supply, installation, connecting and testing sluice valve 80mm bore cast iron body (Long Body) class-PN-1.6 with flanged ends ,conforming to IS:14846:2000, having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc including taking down old sluice valve complete all as specified and as directed.

Detecting the leakage from UG DI / CI / GI pipes up to 150mm bore and rectifying the leakage by burning out existing lead means of 'D' joints, clamps, sockets etc.,including cutting / threading of pipes and other allied works,excavation and earth work in any type of soil complete all as specified and as directed.

Taking out unserviceable wheel shaft and lock nut of cast iron sluice valve from pit / column pipe of 150/100/80mm bore and carryingout to work shop for cutting, threading, grinding etc., inluding refixing the same after repair and replacement of lock nut complete all as specified and as directed.

Supply ,laying, jointing and testing of centrifugally ductile iron pressure pipes ( S&S) " class K-7 " , 150mm bore , conforming to IS-8329 - 2000 with push on type rubber gasket jointing as per IS 5382, including zinc coated on outer dia of pipe with finishing layer of bitumen and factory cement motor lining as per IS 8329-2000 complete all as specified and as directed. Note : (i) The rate quoted includes the loading / unloading and transportation of pipes. (ii) Excavation and earth work , DI fittings and lead joints will be measured and paid separately, however rate for rubber tyton joints shall be included in the rate quoted.

Supplying, fixing and testing of Ductile iron pipe fittings(specials) heavy duty for spigot socketed pipes such as bends (any type, radius and angle), tapers, any type (straight bend, increasing, decreasing or double socket etc). Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs adopters etc of any size radius and lengh confirming IS specifications, for pipe upto 150 mm bore complete all as specified and as directed.

M&L cast iron fittings bends, (any type, radius and angle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. "Y'' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs for up to 100mm bore complete all as specified and as directed.

M/S Dharam Chand Lal Chand Jain

M.D. CONSTRUCTION CO.

M/s Prem Associates

HOODA CONSTRUCTION COMPANY

M/s Pankaj Enterprises

Anil Builders

Dwarka Enterprises