REPAIR TO ROOFING, CEILING, FLOORING ETC AT KASAULI AND CERTAIN REPAIRS TO DIESEL GENERATOR, LIGHTENING ARRESTOR/ CONDUCTORS WORKS AT SOLAN, DAGSHAI AND KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified.

M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.

M&L PCC 40 mm thick 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floor finish surface of flooring all as specified and directed.

M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified.

Material and Labour Cement concrete 1:3:6 type C-2(40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20 mm graded aggregate ) as in lintels upto 1.5m clear span, copings,pintle hinges, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.

S&F in repair framed work such as grills, Grating, framed guard bars, ladders and frame worked of water tank con- forming to Fe.290.Gde-E-165 complete all as specified.

Material and Labour for Welded steel wire fabric n.exc 4Kg/Sqm supplied and fixed complete to wood or steel members complete all as specified.

M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

S & F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified.

M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed .

M&L fror framed work and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. conforming to Fe 410-0 or Fe 310-0.

Material and Labour for preparing new or previously untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

S & F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified

Dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified

S & F for second class hard-wood(Hollock), timber fixed and clean sawn, in scantlings complete all as specified

Same as item no 19.00 above but except timber---Do----

Material and Labour for 2nd class hard wood (Hollock) Plain fillets Exc13 & n. exc 25 sq.cm square, rectangular or triangular in section, clean sawn, secured with nails or brads,complete all as specified

Material and Labour .63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 ,complete all as specified

Material and Labour .63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120,complete all as specified

S&F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Supplied & fixed in Repair Boarding, 40mm thick second class hard wood(Hollock) Planed one side with butt joints and fixed with nails in any situation in flooring and skirting,complete all as specified

M & L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of Creosote,complete all as specified

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed

ditto- as above item No. 29.00 but except stone.

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

S & F in repair of PVC SWR pipes 110 mm dia as in weep holes in retaining wall /rain water pipe complete all as specified

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work complete all as specified and as directed .

M & L for Rendering 15 mm thick in cement plaster 1:6 on stone work complete all as specified and as directed .

Material and Labour for rendering 15 mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

M & L for 4 mm thick Non asbestos fibre cement building boards or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed

Preparation of New Non-AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of oil bound distemper over one coat chalk whitening complete all as specified and directed.

M& L 12 mm Thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S & F in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified.

Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.

Providing pre cast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as specified .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .

Dismantling existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed.

Dismantling existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.

M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.

S & F 15 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified.

M&L for 900mmx750mm plate rack stainless steel with steel shelves and hanging arrangement for utencil including taking down existing rack complete all as specified and directed.

S&F 40mm waste coupling suitable for urinal of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) fixed in repair.

S&F in repair waste pipe low density polyethylene (LDPE) pipes(waste pipe) of pressure rating 6kgf/sq. Cm.

M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified.

M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and as directed .

M&L for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed (except roof).

M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed.

M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.

M & L for replacement of battery 12V, 180 Ah maintenance free for DG sets with Electro plates including battery lead positive & negative battery terminals complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top dedge of the plate not less than 1.50m below normal ground level, connected to galvanised iron strip 32x6mm as earthing lead by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 25mm bore and 40mm bore light grade for strip protection with funnel wire mesh complete as shown in electrical plate No 5 of MES schedule Part-I 2009, connected to earthing testing point. Note - The unit rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI Pipe (Light grade) for watering, 40mm dia pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Taking down carefully aluminium /GI strip of any size and type from site complete, all as specified and directed.

M&L for fixing in replacement of aluminum strip of size 25 x 3.15 mm with saddles from above test point to Air Termination rods inter connections including brazing for joints copper/brass nuts , bolts /washers with insulators for necessary fixing on wall/laid on roof conductors and down conductors above ground complete all as specified and directed .

Labour for fixing only aluminium strip of size 25 x3.15mm with saddles from above test point to Air Termination rods inter connections including brazing for joints copper/ brass nuts , bolts /washers with insulators for necessary fixing on wall /laid on roof conductors and down conductors above ground complete specified and directed.

M&L for fixing inreplacement of galavanised iron strip of size 32 x 6 mm for earth continuity from test point to aluminium conductors above for inter connections including brazing for joints copper/brass nuts, bolys/ washers with insulators for necessary fixing on wall/trenches etc complete, all as specified and directed.

M&L for fixing in replacement of Air termination, single pointed aluminum rod 12 mm dia and 300 mm long laying at proper distance as per direction of Engr-in-Charge incl all cutting /welding complete, all as specified and directed.

M&L for fixing in replacement of test point terminal block made of gun metal or phosphorous bronze of size 75x 75x75 mm drilled and screwed incl 3 Nos 8 mm dia head screw complete, all as specified and directed.

Dismantling of Solar Water Heating system Collector or tubes type and Suppy & Fixing new, evacuated tube type panel set of 500 LPD to 1000 LPD capacity complete with side holder necessary modification to the bracket fram/ inlet/ out let connection of water incl connected accessories complete all as per specified and directed.

S&F in repair hot water pipe line upto 25mm dia (heavy grade) duly insulated with glass wool/ any other heat insulating material not less that 50mm thick layer including and aluminium cladding by 1.5 mm thick sheet, over the insulation firmly locked in perfect round shape complete all as per specified and directed.

S&Fin replacement Heating Element capacity 2/3.0KW (as per existing sample) ISI Marked round/ tringular base, push type or thread type including rubber washer suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

S&F Thermostat ISI Marked, (as per existing sample) suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

M&L for repairing of tank leakage with company soldering of Solar water heater (any make) of capacity 500 Ltrs to 1000 Ltrs on existing place by Authorised and existing company with testing by Company rep after repaired till deleivery of water and incl all connected accessories complete incl taking down/ opened/ replaced the parts complete all as per specified and directed. Note (i) Make of Spares/ Servicing/ replacement of parts will be carried out by Auth service agency of existing make of Solar Water Heater).

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for taking out old unserviceable and supply, laying, fixing Double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as directed.

Taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismantling ends from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 6.0 Sqmm 2 core with required aluminium cable lugs all as specified and directed.

All as per item No. 77.00 here-in-before but 10 Sqmm 2 core complete all as specified and directed.

All as per item No. 77.00 here-in-before but 16 Sqmm 3.5 core complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and light grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

S&F GI tubing light grade 50mm bore, ISI marked, for cable protection in road crossing .

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 4.0 sqmm and overall PVC sheathed to pass through the street light pole from junction box to street light fitting incl dismentling taking down unserviceable one all as specified and directed.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 6.0 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire from OH conductor to building incl dismentling taking down unserviceable one all as specified and directed.

All as per item No. 83.00 here-in-before but 10 Sqmm complete all as specified and directed.

M&L for painting of steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate white and black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint all as specified and directed.

Taking down carefully flood/street/gate light fitting any type any make any capacity from Pole/Building for repair or for fixing in other position all as specified and directed.

S&F LED Street light fitting 45Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

S&F of 45watt Inverter LED Street Light with IR Sensor for automatic On-Off of street light and shall have inbuilt Li-on battery for 90mins power backup in case power failure. Housing of fixture shall be presurre die cast and system efficacy >100LPW,CRI >70,CCT 5700K ,PF > 0.9,THD<15%. Halonix Cat. Ref. HLSLD-ML04-45-CWL-INV-DIMM-IRSEN-R or equivalent to appendix 'B"

S&F Security light Bracket made out of galvanised steel light grade pipe of 40mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos mild steel clamp 50mm x 50mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer incl dismentling taking down unsv complete all as specified and directed.

S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings incl dismentling taking down unsv complete all as specified and directed. :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly weldedwith nuts & bolts complete all as specified and directed.

Supply and fixing 200 Watt LED flood light luminaine with ultra sleek ,light weight HT and with secondary optics , made of pressure die cast housing with IP 66 ingress protection and impact resistance of IK 07 4 KV internal dsingle protection all as specified and directed.

Amount of credit of Rs. 204237.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Rajesh Agencies