Provn of drain near bldg no E74 to E79 of 3 1 TRG Regt Gun drill ground Arty Center Addn Altn to floor plaster roof ceiling galvanized sheet int wiring in bldg No E43 in 7th mile area of 3 Dogra and certain Revenue Minor work under GE Golconda

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil all as specified and directed.

Surface dressing n exc 15cm deep and getting out in hard/dense soil.

Excavation over areas not exceeding 1.5 M deep and getting out in hard / dense soil all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in hard/dense soil all as specified and directed.

Returnng, filling in, soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material exceeding 250m n. exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

M&L for hardcore using broken stone or boulders not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L providing PCC type B2 1:2:4 ( 40mm graded stone aggregate ) as in benching/ surface channel of drain complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed.

M&L for pre-cast Reinforced cement concrete (1:2:4) type B1 (20 mm graded stone aggregate) as in cover slabe for manholes etc., and set in cement mortor (1:4) all as specified and directed. Note: Reinforecement will be measured and paid separately.

M&L for Plain cement concrete (1:3:6) type C1 (20 mm graded stone aggregate) as in coping, benching, bed blocks, cills etc., including necessary form work , complete all as specefied and directed.

M&L Brick work with fly ash bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius all as specified and directed.

M & L Brick work with fly ash bricks, half brick thick wall, straight or curved on plan to any radius built in cement mortar (1:4) complete, all as specified and directed.

M&L for Walling of random rubble masonry, coursed (Secunderabad type), well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.

Dismantling of AC sheets / Galvolume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings

M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified

Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

Taking down cement plaster on wall of any desdriptions incl racking out joints for key scrubbing with water etc.

Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sq. M each.

Taking down shutters of any description exc.1Sqm but not exc. 2 Sqm each.

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc.

S&F for solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing as per specification and drawing all as specified and directed.

S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutterpreapred to receive glass, gauze etc. edges of framing plain, chamfered or rounded fitted with cut of mitred beads fior securing glass etc., factory made divided into square, with plain chamfered or rounded mitred and rebated sash bar any number with edges of sash bar & framing moulded, sizes of members of shutter as per SSR Part - I all as specified as per IS fitted to chowkats complete all as directed.

S&F 35 mm thick 2nd class hardwood, Plain, framed, panelled Factory made shutters (two panels), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) klin seasoned and chemically pressure treated complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, and for shutters etc to be prepared for hanging or sliding with and including either hooks and or hinges or steel hanging door fitting (exclusive of steel hanging, running rails and guides ) and hanging: also fastening and fixing complete with Fe-450-W(Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge.

M & L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing.

M&L sheet glass ordinary quality plain, 4 mm thick, glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with wooden beeds .

S&F for 100 mm long extruded Aluminium alloy butt hinges with galvanised mild steel hinge pin and fixed complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F for 150 mm long alluminium alloy anodized handles fabricated type

S & F for 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy

Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

S & F 125 mm long mild steel wire type I Gate and shutter, hook & eye.

S&F butt hinges medium weight, cold rolled mild steel, 100mm size etc complete all as specified and directed.

S & F 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt.

S & F 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt.

S & F 125 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs 150 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S&F Mild steel TMT bars 6 to 8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips) complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of curtain rod 25mm MS decorative type powder coated all as specified in repairs complete all as specified.

S&F of 25 mm dia MS brackets to curtain pipe, decorative type powder coated complete all as specified.

S & F 4.00 Dia of wire in mm Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc.including making good to walls as directed by Engineer-in-charge.

M&L for fixing anchoring fasteners of 18 mm diameter made up of Galvised iron (Heavy Duty) in walls/ceiling including cutting holes and fixing with pcc1:2:4 and including match the existing surface with two coatof white wash/oil bound distempring for tying up mosquito nets in position complete all as specified and directed by Engr-in-Charge.

M&L Plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) 75mm thick as in sub base of flooring/hardstanding complete all as specified and directed.

M&L Polished shahabad stone slab, 15 - 20 mm thick as in flooring including 20 mm thick screed bed/bedding layer in CM 1:6, jointed and pointed in cement mortar 1:3 including grinding and polishing making smooth surface complete all as specified and as directed.

M&L Polished shahabad stone slab, 15 - 20 mm thick skirting 100mm high including 10mm thick rendering/backing coat in cement mortar 1:4, jointed and pointed in cement mortar 1:3 thickness including grinding & polishing making smooth surface of skirting .

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc incl brushing neat cement slurry with 3.0kg of cement per sq. metre complete.

M&L for chequred cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed : set, jointed and pointed in neat cement slurry, laid over including 15 mm thick screed bedding layer in cement mortar (1:6) all as specified and directed.

M&L Plain cement concrete (1:2:4) type B0 (12.50mm graded stone aggregate) 25mm thick, as levelling base of flooring etc., complete all as specified and directed.

S&F for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), tiles jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles all as specified and directed.

S&F for glazed ceramic coloured tiles of size 300x200x7mm thick for vertical surfaces as in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including backing coat in cement mortar (1:4), 10mm thick all as specified and directed.

M & L 75mm thick Plain Cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in plinth protection finished even aned smooth without using extra cement, complete all as specified and directed.

M & L 100mm thick Plain Cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate ) as in foot path / hardstanding finished even aned smooth without using extra cement, complete all as specified and directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing compound of grade 'A' complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work / concrete surfaces finished even and smooth without using extra cement complete, all as specified and directed.

M&L Rendering 10mm thick on brick work or concrete surface as on walls in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar (1:4) on stone masonry or surface other than fair face of brick work finished fair and even without using extra cement complete, all as specified and directed.

M & L for Preparation of new plastered wall surfaces and apply three coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and apply two coats of cement based paint over a coat of cement primer all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer paint including applying 3mm thick wall care putty on wall complete

M&L for complete removal of existing treatment and applying two coats of cement base paint on wall surfaces.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as secified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

M&L Preparation of new or previously untreated steel surfaces of area exceeding 10cm width & girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

M&L Preparation of new new or previously untreated wood and wood based surfaces of description exceeding 10cm width & girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for two coats of oil bound distemper on cement plaster over a coat of primer after preparation of surface on wall all as spd and directed.

S & F of PVC valveless, syphonic action type, flushing cistern, dual operated type, 10 ltr capacity, low level, white with inlet ball valve float and handle including brackets, with 32mm dia PVC pipe, complete all as specifeid and directed.

S&F for 15 mm dia PVC connections with PTMT nuts of length 450 mm, with check nuts complete all as specified and directed.

S & F for health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified

S&F for two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed.

S & F fancy type CP 15mm stop valves/angle cock cast copper alloy screwed down high pressure with screwed both ends for iron pipe or for unions and fixed complete all as apecified and as directed.

S&F for fancy CP bib tap15 mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F Rotational moulded polyethylene water storage tanks, of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with15 mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and as directed

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia.etc complete all as spd and directed.

S & F for white vitreous china wash hand basin, flat back, size 630 x 450 mm including with 01 Nos CP fancy type pillar Tap , 01 No 32mm bore CP waste coupling, 32mm bore PVC waste pipe and one pair of MS bracket etc complete all as specified.

S&F steel water tubing, ‘medium grade’ galvanised, 15mm bore including all fittings to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F steel water tubing, ‘medium grade’ galvanised, 20mm bore including all fittings to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore including taking down existing complete all as specified and as directed.

S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors / walls

S & F for 75mm PVC (SWR) pipes single socketed, in any length as in weep hole complete all as directed.

S & F PVC (SWR) vent cowl 110mm dia.

PVC (SWR) floor trap 75mm dia, plain with gratings including jointing with solvent cement

S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete including connecting to drain (or outgoing pipe).

S & F for vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but incl providing & fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with screws, pointed around urinal back in cement complete as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110mm bore.

S&F PVC (SWR) bends any radius with access doors 110mm bore

S&F PVC (SWR) bends any radius with access doors 110mm bore with access door.

S&F PVC (SWR) bends any radius 75mm bore

S&F PVC (SWR) bends any radius with access doors 75mm bore

S&F Flushing pipe of polyethylene of low or high density, 900mm, 32mm dia, for low level cistern complete all as spd and directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick ,masonary walls, roof etc including new MS sunk box of required size & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including running chases, pinning in and making good the disturbed surfaces to match with the existing specification ,complete all as specified and directed at site.

All as per item No. 108 hereinbefore but for One 3 pin 5 / 6 Amps switch socket outlet point on same board complete all as specified and directed.

All as per item No. 108 hereinbefore but for One 3 pin 5 / 6 Amps switch socket outlet point on independent board complete all as specified and directed.

All as per item No. 108 hereinbefore but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix in replacement of Switch socket outlet combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed at site.

Supply and fix Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed at site .

Supply and fix Ceiling rose surface bakelite three 65x50 mm, terminals 240 volts complete, all as specified.

Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

S&F Electronic fan regulator stepped type with five step 240 volts suitable for 1200/1400 mm sweep AC ceiling fan including taking out the unserviceable complete all as directed as site.

Supply and fix 7 watt LED Bulb , complete all as specified.

S & F LED Tube light fittings 1 x 22 complete with all accessories internally prewired and including LED tube rod connectiing up with twisted flexibke PVC copper condutor cable of 23/0.0079 from ceiling rose complete all as specified and directed. Make : Cat No Havells Code No :REGALBATTENT 8UPTO1X22WSSBSWH(batten) and CRYSTAL 1213T8DSTL20WLED865SGLASS (TUBE Rod) or Equivallent in Philips/Cromton Greaves)

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified and directed at site.

Supply and fix in replacement of Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 08 ways, complete all as specified.

Supply and fix in replacement of Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 04 ways, complete all as specified.

Supply and fix Sheet metal enclosure MCB DB double door including 200 Amps bus bar SPN 240 V, for 04 ways, complete all as specified.

Supply and fix in replacement of MCB SP 06 to 32 Amp, 240 volts complete all as specified.

S& F MCB SPN, 240 volts, AC, current range 40 Amps complete all as psecified and directed.

S& F MCB SP, 240 volts, AC, current range 6 to 32 Amps complete all as psecified and directed.

Supply and fix in replacement of MCB SPN 06 to 32 Amp, 240 volts 50Hz AC supply, complete all specified.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge.

S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor of 10 Sqmm complete all as specified and directed at site.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for Concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed at site.

M&L fabricated of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and directed at site.

M&L House service bracket (hook type complete with 3.0m long G.I pipe 40mm dia Med.Grade, two nos 90 degree bend M.S hook and stay or guy including taking sown of old unserviceable one all as specified and directed at site.

Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades and Painting ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and refixing ceiling fan along with 2 feet new down rod and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed at site.

S& F exhaust fan 230mm sweep, 1400 RPM, 230 volts, 50 Hz, iron body with louvers, frame complete fixed according to the hole provided complete all as specified and directed.

NAVANAND ENTERPRISES

Sri Lakshmi Enterprises

Sumpoorthy Engineers