SPECIAL REPAIR TO BLDG NO T-10 HOSP AT MAMUN UNDER GE SOUTH MAMUN

Amount

Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & Labour for Rendering 15mm thick in two layers (base layer 10mm in CM 1:6 & finishing layer 5mm thick in cement mortar (1:4) using liquid water proofing compound ( In 2nd Coat layer only@200ml/bag) on brick work or concrete surfaces of wall surfaces finished even and smooth using extra cement complete all as specified & directed. (Note : WPC shall be measured and paid separately)

Material & Labour Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement ,complete all as specified and as directed.

Material & Labour for rendering 5mm thick cement plaster on surfaces of concrete ceiling in cement mortar (1:3), surface finished even and smooth using extra cement, complete all as specified & directed.

Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth by applying two coat of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed.

Material & Labour for three coats of white wash on newly plastered surface of ceiling including preparation of surfaces all as specified and directed.

Material & Labour for preparation of new plastered surface of external wall/chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer as per recommendation of manufacturer for external surface, over primed surface applying two coat of cement base paint including curing complete all as specified & directed.

Material & Labour two coats of Oil bound emulsion over and including a coat of 2 mm thick wall care putty on old surface of wall including preparation of old plastered surface complete all as specified and directed.

Material & Labour for Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coats of cement base paint over and including a coat of alkali resistant priming paint as per manufacturer recommendation complete all as specified and directed.

Material & Labour for preparation of existing white washed surfaces of ceiling and apply one coat of white wash on plastered surfaces complete all as specified and directed.

Material & Labour for Non-skid ceramic coloured rectified edges joints free tiles 8mm thick area of each tile not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed.

Material & Labour for Non-skid ceramic coloured rectified edges joints free tiles 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) including dismantling existing floor tiles of any type and pattern including cement mortar bedding and removing debris/tiles out off the premises, etc complete all as specified and directed.

Material and labour for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over screed bed or bedding layers of mortars 15mm thick in CM 1:4 for laying floor finishes incl dismantling floor, hearth or wall tiling complete all as specified and directed.

Material & Labour for Glazed ceramic (coloured) tiles 7mm thick, of size 450mmx300mm, on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises, etc complete all as specified and directed.

Material and labour 20mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15mm thick cement screed in CM 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 Kg per Sqm, rounding/ moulding edges all as specified and directed.

Taking down chowkhats or frames of any description exc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware complete all as specified and directed.

Taking down chowkhats or frames of any description not exc 1.50 Sqm each with shutters, (without taking off shutters from the frame) including builders hardware , complete all as specified and directed.

Material & Labour for factory made solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet with one or more rebate reinforced with MS square tube, fixed in opening as per specification & drawing No CEPZ/TD-378/11 sheet No 1/1, complete all as specified and directed.

Material & Labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

Material & Labour for Aluminium anodised barrel tower bolt, extruded section 150mm long , complete all as specified and directed.

Supply and Fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply and fixing 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed.

Material & Labour for 250 mm long aluminium alloy sliding door bolt with hasp & staple (bolt type) and fixing clip of sheets cast or extruded section and fixing sliding bolt of extruded section complete all as specified and directed.

Supply and fixing in repairs aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges 100mm long (02 Nos) suitable handle complete all as specified and directed.

Supply and fixing in repairs aluminium door shutter, aluminium sections weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 02 Nos handle 150mm long and 02 Nos of 150mm long aluminium tower bolts, in each shutter, hinges, anodized aluminium snap beading fixed with screws complete all as specified and directed.

Supply and fixing in repair aluminium frame work for doors, ventilators, partition walls with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.

Supply and fixing in repair door closer hydraulically regulated, aluminium body desingation No 3, universal type, fixed complete all as specified and directed.

Supply and fixing for 3mm thick figured glass, pin head type, ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not exc 0.5sqm in each pane, etc complete all as specified and directed.

Supply and fixing for 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads/ glazing pins not .exc 0.5sqm in each pane complete all as specified and directed.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium frame in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing 12 mm thick aluminium colour PVC sheet fixed with rubber beading and glazing clips to aluminium frame complete all as specified and directed.

Supply and fixing for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S & F in repairs 15 mm bore Pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & as directed.

Supply and Fixing in repair for 15 mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and Fixing in repair Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S & F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed in repair for 15mm bore complete all as specified and directed.

Supply and Fixing CP Brass Tubular towel rail 20mm dia D-type 60 cm long between flanges, including brackets and fixed to walls with chromium plated screw and PVC cleat complete all as specified and directed.

Supply and Fixing in repair Brass Chromium Plated shower rose with arms fancy type with swivel joints 75 mm face dia of appoved make and cat part for 15mm bore iron pipes complete all as specified and directed. Make : Prayag Cat part No BS-73 or equivalent model in Hindware/Marc.

Supply and Fixing in repair 20mm bore gun metal gate valve, with cast iron wheel head, screwed both ends for GI pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butterfly screwed down for GI pipe 20 mm dia complete all as specified and directed.

Supply and Fixing in repair for dual flush PVC flushing cistern 10 Ltr capacity, valve-less syphonic action type, low level, complete with inlet, ball valve, handle, including brackets/pins, PVC flush pipe 32mm bore and PVC connection 15mm bore 450mm long etc complete all as specified and directed.

Material & Labour for Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent model in Hindware/Parryware/Somany) brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long & 15 mm bore PVC connections, including cutting for and pinning in end of brackets or erecting stand fixed in repairs complete all as specified and directed.

Supply and Fixing in repair vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, incl supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed.

Supply and fixing in repair Jet Spray (with 1.50 mtr tube) fixed to EWC and angular stop cock complete all as specified and directed.

Stainless steel grating doom 100 mm dia with waste hole complete fixing in floors complete all as specified and directed.

Stainless steel grating doom 100 mm dia complete fixing in floors all as specified and directed.

Supply and Fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

Supply and Fixing in repair for Rotational moulded polyethylene water storage tanks three layer of capacity 1000 litre three layers, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and dismantling of existing PVC tank of any capacity complete all as specified & directed.

Supply and fixing in repair tubes 15mm bore 'medium grade' galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of existing complete all as specified and directed.

Supply and fixing in repair tubes 20mm bore 'medium grade' galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors including dismantling of existing complete all as specified and directed.

Supply and fixing 20mm bore mild steel drapery rods with 1mm thick PVC wood grain coating including brackets and knobs fixing on windows and doors for hanging curtains complete all as specified and directed.

Cement concrete type C-1 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

Supply and Fixing 75 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-0 (1:2:4) complete all as specified and directed.

Supply and Fixing 100 mm Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete type B-0 (1:2:4) complete all as specified and directed.

Supply and fixing in repairs cast iron gully/ nahani trap 100mm with grating including jointing to waste pipe fixed in cment concrte type B-1 (1:2:4) complete all as specified and directed.

Supply and Fixing in repair for 100 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

Supply and Fixing in repair for 100 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed.

Supply and Fixing in repair for 75 mm bore, cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed.

Supply and Fixing in repair for 75 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

Supply and Fixing in repair for 50 mm bore, sand cast, cast iron soil, waste and vent pipe with cement joints, in any length with ears, fixed to wall with stack clamp made out of 25mm x 3mm galvanised flat iron fixed with bolt and nuts etc complete all as specified and directed.

Supply and Fixing in repair 75 mm Cast iron cowl, fixed with cement joints complete all as specified and directed.

Supply and fixing stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia CI pipe complete all as specified and directed.

Supply and fixing stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia CI pipe complete all as specified and directed.

Material & Labour for PCC 1:2:4 as in type B-0 padding to roof, surface finished even and smooth without using extra cement incl demolition of existing cement concrete,complete all as specified and directed.

Rendering 10mm thick on concrete surfaces in CM 1:4 on top of roof slab mixing with WPC @ 3% by weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed

Material & Labour for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of existing sheets of any type complete all as speecified and directed. [Note : The colour of sheet shall be as approved by GE]

Material & Labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in ridge fixed with self tapping screws incl dismantling of existing sheets of any type complete all as speecified and directed. [Note : The colour of sheet shall be as approved by GE]

Material & Labour for False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) in a grid size of 605x605mm from manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board of any type/pattern with GI frame work with grid size of 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.5 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI Hangers 2 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm sixe 60mm long and expansion hold fasteners 12.5mm ida, 40mm long incl taking down existing grid complete all as specified. complete all as specified and directed. Note :- Invoice from company’s authorized dealer shall be submitted with material by the contractor along with dealership certificate. Certificate of genuineness from the manufacturer shall also be submitted by the contractor before getting the material passed from the department.

Material & Labour for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including cleaned dry sand cushion 50mm thick over and including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of damaged cement concrete of any type or description and removal of debris out off the premises etc complete all as specified and directed.

Material & Labour fly ash glossy finish coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and pigment over screed bed or bedding layers of mortars 15mm thick in CM 1:6 over 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including demolition of existing tiles all as specified and directed.

Material & Labour for PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in kerbs of interlocking tiles all as specified and directed.

Material & Labour for Brick work with Fly Ash Brick (Non-Modular) Class 7.5, straight or curved on plan exceeding 6m mean radius built in CM (1:6) including demolition of old existing brick work complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm) comprising of uPVC multi-chambered frame and mullion (wherever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing of hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/ mm², modulus of elasticity 900 N/ mm² and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down carefully unserviciable/ damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc ) and removing material from site and making good to the disturbed surface to match with existing finish complete all as specified and directed.

Material & Labour for Point wiring using FRLS PVC insulated unsheathed /multi stranded copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bend, junction box and pressed steel sunken box 60 mm deep & 1.6 mm thick duly painted inside and anticorrosive out side for mounting switches, sockets, fan regulators with 3mm thick plastic laminated sheet cover of suitable size, connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type (conduit shall be fixed on surface of ceiling with necessary saddles where concealing of conduit is not feasible), for light/fan/bell point complete all as specified and directed. (Notes : 1. Switch/bell push/fan regulator shall be measured and paid separately 2. The unit rate quoted include the cost of cutting chases in surface for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surface.)

All as per Srl item No. 79 above but one light point controlled by two, two way switches, etc complete all as specified and directed.

All as per item No 79 above, but for 5 pin 5 Amp socket outlet point on idependent board controlled by one switch 5 Amp one way, etc complete all as specified and directed

All as per item No 79 above, but for 5 pin 5 Amp socket outlet point controlled by one switch 5 Amp one way on same board, etc complete all as specified and directed

All as per item No 79 above, but for one 15 Amp socket outlet independent point concealed using 2.5 Sqmm FRLS PVC insulated multi-strand copper conductor wire including 2.5 Sqmm FRLS insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor to match existing finished etc complete all as specified and directed.

Supply and Fixing Modular Socket outlet, 5 pin, multi purpose 2 module 6 Amps, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKSWW065 or equivalent of Legrand/Siemens/Schenider.

Supply and Fixing Modular Socket outlet, 5 pin, multi purpose, 2 module 6/16 Amp, AC 230 volts, etc complete all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVKCWW163 or equivalent of Legrand/Siemens/Schenider.

S & F modular switch piano type flush button single pole one way 6 Amp one module, front operated complete all as specified and directed.

S & F modular switch piano type flush button single pole two way 6 Amp one module, front operated complete all as specified and directed.

Supply and Fixing Modular Switch 1 way 16 Amps , 1 module etc complete , all as specified and directed. Make : Crabtree (Verona) Cat Part No : ACVSXXW161 or equivalent of Legrand/Siemens/Schenider.

Supply and Fixing lamp holder insulated body with back plate for batten fittings with polycarbonate body.

Supply and Fixing Ceiling rose polycarbonate isolated body surface Bakelite, not less than 65 x 50 mm, three terminals, AC 230 volts etc, complete all as specified and directed. Make : Havells Cat Part No Reo/Cona Cat Part No 9246/GM Cat Part No 8224

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 120W- 2 module including necessary connections complete all as specified and directed.

Material & Labour for Sub main wiring with FRLS PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V with 1X6 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. (Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.)

Supply and fix surface mounted 1 x 20 watt LED tube light fittings ( 4 feet long), decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack 20 W LED 6500K with including all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/ PVC connector to light fitting and testing etc. complete all as specified and directed.

Supply and fix surface mounted 1 x 10 watt, 6500K LED decorative ultra slim square profile LED lighting fixture (2 feet long, mirror light) with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/ PVC connector to light fitting etc complete all as specified and directed.

Supply and fix bulk head 10 W LED, 6000K light fittign bulkhead with premium quality diffuser for glarefree light and easy to install snapfit installer complete with all accessories, connecting electrically to ceiling rose using 3 core PVC insulated overall sheathed flexible copper conductor of size 0.75 sqmm all as specified and directed.

Supply and fix LED security light luminaire 20W, IP 65 AC 230 volts, made up of pressure die cast aluminium housing complete making connection with street light/ building security light box or OH line using PVC insulated and sheathed three core multi stranded copper conductor cable of size 1.5 sqmm including suitable size of GI pipe bracket made of light grade pipe for mounting of fitting all as specified and directed by Engineer-in-Charge.

Supply and fix VTPN Distribution Board with provision for MCCB as incomer 100A DD04 way IP 54 (for incoming MCCB & outgoing MCBs), with copper Busbar for each phase, with 2 Nos Neutra Bar, 2 Nos Earth Bar and Cable ties for cable management, fully insulated Busbar & shrouded Neutral Bars, with including 100 Amps MCCB, 25KA, 4 pole, as incomer fixed flush in wall with any type civil work involved and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure SPN 240 volts with a two pin and earth plug and socket with one Single Pole MCB of 20 Amps B curve 240 volts fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fix sheet metal enclosure MCB distribution board Double door, Single Pole & neutral 240 volts 8 way with IP 54 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed surfaces to match with existing specification.

Supply and fix MCB SP 6-32 Amps 'B' curve 240 volts with rupturing capacity 10 KA.

Supply and fix MCB SPN 32 Amps 'C' curve 240 volts with rupturing capacity 10 KA.

Supply and Fixing Heavy duty Exhaust fan, single phase, 220 Volts, 50 Hz, 1400RPM, 300mm sweep with louvers including cutting round opening, through one brick thick masonry wall suitable for exhaust fan by providing, fixing and removing shoring, forming jambs with CM 1:3 and making good disturbed surface to match existing finish and removal of rubbish out off the premises etc complete all as specified and directed. Make : Crompton Model No EXHD300-4-1 or equivalent model of Bajaj/Havells

Material & Labour for earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, HDPE pipe 15mm bore as protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels .

Taking down fan/ exhaust fan by disconnecting from ceiling rose, dismantling blades & cleaning by replacement of capacitor, safety pin, cap, nuts & bolts etc. application of one coat of synthetic enamel paint by spray painting & rewriting number and re-fixing the blades and ceiling fan in the same position after including minor repairs and making electric connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning complete all as specified and directed.

Supply and fix LED Lamp 12 Watt complete all as specified and directed.

Supply , laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 25 sqmm 4 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches including taking down existing cable & bricks complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

Supply and Fixing for GI tubing 40 mm bore light grade laid in trenches/floors/ fixed to wall/poles for protection of cable with necessary fittings and FI clamps duly painted complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc (for cable, pole stay manhole etc), in any type of soil and getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm thick, etc complete all as specified and directed.

Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and directed.

Material & Labour for Sand filling in trenches dry and clean sand unwashed including punning around cable for protection of under ground cable duly compected and rammed with a layer of sand of 8 cm depth for the purpose of cushioning.and after laying cable the same shall be covered with sand to a depth of 15 cm (with overall 23cm of depth of sand cushioning punned down to 18cm) complete all as specified & directed. Note : Punned thickness shall be measured and paid accordingly

M & L for well burnt bricks , laid flat ( old size) sub class B designation 75 for cable protection complete all as specifed and directed.

dadwal engineers

WALIA ENTERPRISES

Ashoka Engineers