PROVN OF GENERATOR SHED AND SPL REPAIR OF OLD VINTAGE RUSTED WATER SUPPLY MAIN LINE UNDER GE 874 EWS

Amount

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

Excavating in trenches n exc 1.5 m wide and n exc 1.5m in depth for foundation etc and getting out in soft/loose soil etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 as in foundation and filling complete all as specified and directed.

M&L for brick work with sub- class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered or un plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

S&F mild steel framed work for such as roof trusses(framed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.,

S&F mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 Note:- brackets over 10 kg each to be measured under 'Structural Steel.

M&L for preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws etc. complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material n. exc. 50 mtr and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63mm deposited, spread & levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 100mm thick in sub base of floor complete all as specified and directed.

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for plain cement concrete type B-1, 100mm thick (1:2:4) using 20mm graded aggregate) for the base of Generator set complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick complete all as specified and directed.

Material and labour for PCC (1:4:8) type B-1 in foundation/mass concrete complete all as specified and directed.

S&F GI water tubing 100mm bore 'medium grade', galvanized, with all fittings like flanges, elbow, long bend, tees, washers for flanged joints, nut bolts with MS plate washers etc jointed and laid in trenches and water leakage testing complete all as specified and directed. Note: Only threading Joints to be provided no welding of joints are permitted at each joints.

S&F GI water tubing 50 mm bore 'medium grade', galvanized, with all fittings like flanges, elbow, long bend, tees, washers for flanged joints, nut bolts with MS plate washers etc jointed and laid in trenches and water leakage testing complete all as specified and directed. Note: Only threading Joints to be provided no welding of joints are permitted at each joint.

S & F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 50 mm and fixed complete all as specified and directed.

M&L for construction of valve pit of size 75 cm X 75 cm X 75 cm internal dimensions brick construction including all excavation and earth work in hard/loose soil returning filling in disposal of surplus spoil to a distance not exceeding 50 m and depositing where directed PCC in foundation of the mix (1:4:8) type D2 (using 40 mm graded crushed aggregate) brick masonry in cement mortar (1:4) rendering 12 mm thick in cement mortar (1:4) internally finished even and fair and pointing flush externally as the work proceeding in the same mortar mild steel 50X6 mm frame MS sheet cover of 2 mm thick with handle and locking arrangement painting all the exposed MS work with two coat of synthetic enamel paint of the make as approved all the MS embedded in PCC with two coats of black bituminous paint complete all as specified and directed.

M & L for (5.0 x 0.4 x 0.3) mtr Road cutting/digging for laying of 25/50 mm dia GI pipe and filling and make good with PCC Concrete the disturbed road with complete all as specified and directed.

patriotic builders (BID ID -3156331)

M/S BEE AAY CONSTRUCTIONS (BID ID -3156346)

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3153743)

Bidder Name

patriotic builders

M/S BEE AAY CONSTRUCTIONS

MS SHEIKH NADEEM AKBAR

M/S MUNEER AHMAD WANI CONSTRUCTIONS