Construction of 06 seated toilets and urinals at the main gate of the District Jail, Cell No. 33, Loha Mandi Zone.

Cleaning of site for workable condition including disposal of malva from the site.

Excavation in soil mixed with moorum/shingle, kankar requiring the use of special tools & plant such as pick axes sabbals etc. foundation in ordinary Soil (Loam, Cley or sand) including, lift up to 1.50 M and lead up to 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge up to a distance of 30 M form the foundation trenches. Including royalty.

E/W cutting in or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5m lift and 30 m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the engineer-in-charge including royalty 9.00 cum.

Providing and laying cement concrete in 1:5:10 (1 Cement :5 Fine Sand :10 Stone Ballast 40 mm guages) and curing complete, including cost of form work in foundation and floors.

M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work.

Providing & laying D.P.C. 40 mm thick with cement concrete consisting of one part cement coarse cement and three part of approved 10 mm. grade stone grit and including water proofing material as directed by the Engineer-in-charge in the proportion as specified by the manufacture.

M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work in super structure above plinth level upto floor five levels.

M-150 Brick work in 1:3 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work.

R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportion 1:2:4 for slab work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150.

Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars).

12MM Thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not including 80mm in girth and finished even and smooth. No extra for missing any additive. 1 cement : 4 Coarse Sand.

Mild Steel and Iron work of small size and section such as holding down woods, hold fasts tierods, grating etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of grill/stairs case railing.

Supply & fixing of 32 mm thick flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screw to be supplied departmentally.

Supply and fixing of oxided iron fittig etc. all complete.

Providing nad fixing of door & ventilator etc. all complete.

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufactured and of required shade and undecorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr./10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat.

Painting two coat other primer on steel with sianth paint including etc all complete.

Providing and laying Vitrified tiles in floor of 300x300 mm size (thickness 10mm), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in desired colour and shades, laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS : 15477 including grouting of joints.

Supply and fixing of Orissa pattern W.C. pan size 580 mm x 440 mm including supply of all materials labor T&P etc. all complete.

Supply and Fixing of white vitreous china wash basin size (630x450) mm all complete.

Providing and laying 18 mm white granite stone (super quality) flooring over 25 mm thick bas of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete.

Supply and hosting of syntax or equivalent high density polythene seamless of piece molded tanks and placing the same in proper position including all taxes, labor and T&P etc. for proper completion of work. Tank should be ISI marked syntax or equivalent for 1000 liters.

Supply and laying P.V.C. pipe 110 mm dia I.S.I. make.

Providing and fixing PVC pipes confirming to IS make working pressure 6kg/sq cm including testing labour T&P and all complete fitiings. 140mm diameter

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer-in-Charge External work. 25 mm Nominal outer dia pipes

Supply and fixing stock cock brass bib cock heavy quality (Gem Mikado/Excess’s Williams or eqv.) (15mm dia 400 gms)

Brass stop cock heavy quality 20mm dia (Gem Mikado/Excess’s William of qev.)

Providing and laying Vitrified tiles in floor of 500x500 mm size (thickness 10mm), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in desired colour and shades, laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS : 15477 including grouting of joints.

Supply and fixing of light fitting switch board.

Supply and fixing of light point.

S/L/J of 20mm dia PVC conduct pipe etc. all complete.

Supply and fixing of wiring Sub Main.

Supply and fixing of plug power point 15mm.

Lettering & painting of wall etc. all complete.

Supply and fixing of 27 watt. CFL etc. all complete.

P/L GSB with graded stone ballast with moram with stone grit size, stone ballast with hand ramming watering including all material labor T&P etc. all complete.

Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30. (tiles shape decided by Engineer-in-charge with ISI Mark)

Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30. (tiles shape decided by Engineer-in-charge with ISI Mark)

Carriage of Ballast, Kankar, Coal, Grit or Sand etc. by head load up to 90 meters (3 Chain only) including loading & unloading but excluding stacking.

Supply & fixing 1.5 HP submersible pump of I.S.I marked all complete.

Supply and fixing of black granite stone board and approved standard matter with brick work, plaster & paint etc. all complete.

Dismantling brick work or stone work in lime or Cement mortar and including stacking of material as directed by E/IC with in a distance of 60 meters (200 feet) but Mud Mortar.

Making connection of drain or sewer line with existing man hole including breaking into and making good the walls, floors with cement concrete 1:2:4 cement plastered on both side with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels with cement concrete 1:2:4 for the drain etc. all complete.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1 cement: 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in side plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :4 coarse sand : 8 graded stone aggregate 20 mm nominal size) inside with a floating coat of neat cement complete as per standard design (inside size 900x800mm and 500mm deep including C.I. cover frame)

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 meter height, backing filled with a grout of average 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with and admixture of pigment matching the stone shade: (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone- exposed face fine dressed with rough backing. 30mm thick.

6mm thick plastering on ceiling and soffites of stair upto floor two level insted of plastering in wall (V) 1 cement : 3 fina sand

Finishing walls putty approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all materials.

Providing and fixing 1mm thick decorative high pressure laminated shoot of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quantity confirming to IS : 2046 type S. including cost of adhesive of approved quality.

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer-in-Charge External work. 15 mm Nominal outer dia pipes

Providing and fixing white vitreous china flat back half stall urinal of size 550x350 mm with white PVC automatic flushing system with fittings standard size C.P. brass flush pipe spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556 C.I. trap with outlet grating and other coupling in C.P. brass including painting of fitting and cutting and making good the wall single half stall urinal with 5 meter P.V.C. automatic flushing system all complete.

Supply and fixing chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). (18 New Item)

Sub Total (A)

Deduction Cost of old brick

Deduction Cost of old brick bats

Sub Total (B)

Sub Total (A-B) = (C)

Add / Deduction For Estimate Figure Amount Match

Grand Total