Tender ID

Karnataka

Retender

Works

Buildings

Construction of 06 rooms to Government girls PU college Koppal

Public Works Department

PWD Division Office Koppala | Karnataka

Amount: ₹1.3 CrCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 Nov 2024
Closed6 Dec 2024
Retendered29 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 29 Nov 2024

Tender Value

₹1.3 Cr

EMD Value

₹2 L

Closing Date

6 Dec 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

P Hemantharaj

Office Number

Mobile Number

Work Description

Construction of 06 rooms to Government girls PU college Koppal

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT16741

Reference Number

PWD/2024-25/BD/WORK_INDENT16741

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Koppala

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredRegistration Certificate

RequiredWork Done Certificate

RequiredLiquid Assets

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found falls action shall be taken as per rules

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The depatment is not responsible for any delay in accessing KPP portal.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Employer reserves the right to reject any or all Tenders without assigning any reason

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Item Rates quoted shall include cost of Royalty charges on constructive materials & other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads & lifts, labour, hire charges of all machineries & equipments and all incidental charges etc., complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work

The Tenderer shall obtain the required work done certificates from the Competent Authority not below the rank of Executive Engineer or equivalent. And scan the original certificates and attach the scanned file to the bid. The Original Certificate/certificates shall be produced at the time of opening of technical bids for physical verification

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 -Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan Original Ownership documents/ Lease/Hire commitment Agreement for the required machineries and attach the scanned file to the Bid. The original documents shall be produced at the time of opening of technical bids for physical verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

The tenderer shall furnish required information in all prescribed formats. Scan & upload all the original documents/Formats required for this bid to the KPPP portal. The Original documents/ Formats shall be produced at the time of opening of technical bid for physical verification.

The tenderer shall note that the scanned Documents shall also be up loaded in the tasks created under Document/ Evidence required from the bidder.

All materials required for this work shall be procured by the bidder himself and should got tested by the quality control authorities at his own cost before use on the work

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the standard bid document KW4 KPWD and further orders theron

The KPWD Code, KTTP Act/ Rules, Delegation of powers and other Government orders issued by Government from time to time will apply.

If the office happens to be closed on the dates notified, next working day will holds good.

The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause. Failing which 1% of the amount of work done will be penalized

If undue delay caused by the contractor, the progressive damages caused to road will be assessed and make good at the cost and risk of the contractor. In addition, suitable action will be initiated against the contractor for the damage occurred during the undue delay period in accordance with the Karnataka Highway act 1964.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent

Contractor should follow strictly the prevailing rules of labour act and applicable any law as concerned

18%GST shall be paid to the tendered amount separately

The increase in GST shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalidity thereof shall be referred and settled under the Arbitration Centre - Karnataka (Domestic & International) Rules 2012, by one or more arbitrators appointed in accordance with its rules

The tenderers shall note that as per the Government Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015 & GO no 850-12/15 Dated 15-12-2016 the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for purchases, but not for works.

Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. In case of any mishap, accidents are cause of death it is the duty of the contractor to settle the dispute at is own cost. In no way department is held responsible

The construction materials (Minerals Metal, Sand and Murom, etc.,) shall be bought from the authorized quarries along with the mineral dispatch permit or else 5 times the royalty will be deducted as penalty as per the Directions on the Director, Mines and Geology Department Bangalore Proceedings Dated 25-03-2013.

The defect liability period is one year from the date of actual completion of work if it is of original nature of work. For repairs of the building work the defect liability period is till the completion of tender period or up to 31-03-2025 whichever is later.

The defect liability period is one year from the date of actual completion of work

Financial turn over and Financial commitments of previous years shall be given weight age of 10% per year to bring them to the price level of 2024-25 in the technical qualification criteria

The tender period for completion of work is 11 (Eleven) Calendar months. (Including monsoon period

it is obligatory for the contractor to use the required machineries for various activities involved in construction as per Morth specification

It is mandatory to use Manufactured Sand as per Government Circular No.PWD/72/BMS/2013 dated 31-07-2013. Also it is mandatory that the bidders should upload the required documents which demonstrate that, the bidder owns sand manufacturing unit or an agreement with the manufactured sand suppliers. The manufactured sand that should be got tested to confirm IS 383-2007 before use. Further, the contractor shall have his own Artificial sand manufacturing plant Unit.

The Successful Tenderer has to execute the work as per approved designs and drawings provided by the Department.

The star rates in respect of specified materials (Cement, Steel and Bitumen) shall be payable as per GO No: FD/3/PCL/2008 Bangalore Dated 21.11.2008.

The Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value of amount put to tender

Successful tender should have to obtain all mandatory clearance from Fire Services, Electrical Inspectorate, Air pollution, GESCOM Power Supply etc., before commencement of the work.

The Tenderer or his identified sub contractor sholud possess required valid electrical license for executing building electrification works and also Tenderer or his identified sub contractor sholud possess valid license for executing water supply/Sanitary engineering works

The awarded Contractor has to submit his bills through e-MB for payment. (Billing is through e-Mb i.e., Contractor has to produce Soft copy and hard Copy of RA or Final bill for payments), as per the G.O. No. FD 56 Pro. Cell 2004, Bangalore Dated 18th January 2005.

Estimate rates are excluding GST and the prevailing GST 18 percent of APT is added in the form of Lumpsum in santioned estimate as per the guidelines in common SR 2021-22 GO PWD51 RDF 2019 Bengaluru dt 18-03-2022. Therefore, APT or ECV is excluding GST. In kppp portal there is no option to add GST separately over and above APT during DTS process. Hence even through the tender has been invited by opting for the INCLUSIVE option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. circular no FD/447/expenditure/12/2022/dt -30-07-2022. Therefore GST declaration certificate must be uploaded mandatory by the prospective bidders

The Agency shall comply with ISO14001 (Environmental Management System) requirement during execution of work.

The Earnest Money Deposit Rs. 200,000.00 through KPPP portal OR it shall be in two parts. Part (1) Rs. 1,00,000.00 through KPPP portal under any one of the option(CC/DD/NEFT/OTC) and Part (2) Balance EMD of Rs. 100,000.00 shall be in favour of the Executive Engineer, PWD Division Koppal, in the form of Bank Guarantee in the prescribed format obtained from any Nationalized/Scheduled Bank. The scanned copy of the original Part(2) EMD should be uploaded along with the Technical bid. The part (2) of the EMD shall be delivered to the Executive Engineer before the prescribed Date and time of opening of the Technical Bids.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs.63.32Lakhs (50% of estimated cost of tender)

Work Done Certificate

Executed in any one year the following minimum quantities of work (Cement Concrete - 216.75cum, Earthwork - 201.99 8cum,Steel-19.40 Tonne,SSM/BBM-150.136 cum,Plastering-1239.80 sqm,Flooring-506.32 sqm,Wood-1.27 cum(80% of peak rate of construction)

Work Done Certificate

Financial Status

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 253.30. Lakhs)

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs. 34.54Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹3,170

EMD Fee Amount

₹2 L

Important Dates

Last Activity

29 Nov 2024

Published

29 Nov 2024

Bid Opening

7 Dec 2024

Download Ends

30 Nov 2024

Pre-Bid Meeting

30 Nov 2024

BOQ Preview

•

Earth work in surface excavation by mechanical means for lowering & leveling

•

the ground for all works other than foundation in all kinds of soils & upto depth

•

not exceeding 300mm as per drawing and ...

•

Earth work excavation for Foundation by mechanical means for all works &

•

depth upto 3 m, as per drawing and technical specifications, including setting

•

out, shoring, strutting, barricading, caution ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as

•

Providing and injecting chemical emulsion for Pre-constructional Anti- Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, t...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tyi...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, mconsolidating each deposited layer by ...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing bright finished brass handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm

•

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

•

Providing fixing of 2track x 2-panel sliding windows made out of multi

•

chambered UPVC(Matching to RAL-9016) sections and with minimum

•

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing 15 mm cement plaster on the rough side of single or half brick

•

wall of mix: 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even

•

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

•

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats onnew work over an under coat of suitable shade with ordinary paint of approv...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Finishing walls with Acrylic Smooth exterior paint of required shade

•

:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Providing and laying in position Cement Concrete for all Sub structures of

•

building, Irrigation works, Sub structure works of bridges, Drain works &

•

other parallel works from 0.50m to 3.50 m height....

•

Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Lettering with black Japan paint of approved brand and manufacture to give

•

an even shade including preparing the surface after thoroughly cleaning the

•

surface to remove all dirt, dust and foreign ma...

•

Formwork for RCC Columns / Shaft (Slip

•

Centering) 70 %

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Columns

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Lintel Beams

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Roof Beams

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Roof Slab

•

Providing and laying in Cement Concrete for all Basement & surface level

•

works, return walls, retaining walls, sunken floors etc. The granite/trap/

•

basalt crushed graded coarse aggregates and fine a...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm

•

Providing and fixing bright finished brass handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm

•

Providing fixing of 2-track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum

•

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

•

Providing 15 mm cement plaster on the rough side of single or half brick

•

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

•

wherever required smooth rendering, providing and rem...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even

•

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

•

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Columns

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Lintel Beams

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Roof Beams

•

Percentage Additionalities for Formwork, Centering & Scaffolding(rcentage on finished rate of concrete per m3) QTY Same as Roof Slab

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm

•

Providing and fixing bright finished brass handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi

•

chambered UPVC(Matching to RAL-9016) sections and with minimum

•

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing 15 mm cement plaster on the rough side of single or half brick

•

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

•

wherever required smooth rendering, providing and rem...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even

•

shade. Two coat applied @ 0.90L/10 m² over an under coat of primer

•

applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Providing and laying water proofing treatment to the Roof with PU based

•

single component elastomeric pure polyurethane based coating on New

•

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted w...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and running bef...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and running bef...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and running bef...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with

•

necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 38mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 50mm

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 sqmm (Earth Wire) FRLS multi strand PVC insulated copper wire (Confirming...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified I...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Two

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way

•

Regulator Two Module

•

Regulator Two Module 16A One Way

•

Regulator Two Module 32 Amps DP

•

Regulator Two Module 6/16 Amps universal

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...

•

SUPPLY OF FITTING LED INDOOR Supplying of ......feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70% lumen maintenance with CRI 80. P...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball b...

•

Supplying and Fixing mm dia class A GI pipe bracket up to 2.7 meters

•

long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street ligh...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL

•

/ LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer

•

of approved make etc.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 38mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 50mm

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Two

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32 Amps DP

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps

•

universal socket

•

SUPPLY OF FITTING LED INDOOR Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with ...

•

Supplying and Fixing mm dia class A GI pipe bracket up to 2.7 meters

•

long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL stre...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL

•

/ LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm

•

dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC

•

Junction boxes, adhesive paste etc., and run...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Grovee Cutting Supplying heavy gauge PVC Conduit Pipe .... dia mm

•

thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer

•

of approved make etc.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 38mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc as required. 50mm

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Two

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32 Amps DP

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16 Amps

•

universal socket

•

SUPPLY OF FITTING LED INDOOR Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with ...

•

Supplying and Fixing mm dia class A GI pipe bracket up to 2.7 meters

•

long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL stre...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL

•

/ LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

WALTER Non Magnetic Green Dry Erase Writing board of dimensions (in mm) 1200 x 1800 Suitable for writing with Chalk Dry Erase Writing board Type Non Magnetic Frame (All round framing) With Frame Mater...

•

Saatvik Wooden Podium design Gable end and modesty panel and top material MDF board of grade SBG II of IS 12406/Latest Specifications Mode of supply Knocked Down To Be Assembled At Consignee Site By C...

•

MAATRIBHUMI Almirah Steel shelving cabinets Technical specification of Almirah steel Generally conforming to BIS specification IS:3312:2021 (with latest amendment) Type of Almirah steel Almirah Steel ...

•

MULTIPLY Three seater classroom desking drawing Specifications Classroom desking and seating type Three seater classroom desking drawing Style Desking and seating (Integrated) Desking with shelf (unde...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

16741.docx

Tender Document • 0.95 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of 06 rooms to Government girls PU college Koppal

Public Works Department

PWD Division Office Koppala | Karnataka

Amount: ₹1.3 CrCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 Nov 2024
Closed6 Dec 2024
Retendered29 Nov 2024