Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹26.4 L+₹2.0 L (8.03%)Rejected-Finance 01 AALAM E NOOR UI MASJID OLD PAHAR GAON DOLLYGUNJ POLYTECHNIC ROAD SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹26.5 L+₹2.1 L (8.40%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹27.3 L+₹2.8 L (11.6%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹27.4 L+₹2.9 L (11.9%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹25 L
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
WELCOME MAINT TO OFFICERS MD ACCN AND SINGLE OFFICERS ACCN AT NDV, ODV AND JAL VIHAR AREA UNDER GE HADDO, PORT BLAIR
2022_MES_565384_1
8696/GE/H/PB
Open Tender
Civil Works
Item Rate
270 days
GE Haddo Port Blair
Class E and Category a(i)
9 documents required · 9 mandatory
₹500
GE Haddo
Yes
12 Jan 2023
25 Nov 2022
22 Dec 2022
25 Nov 2022
15 Dec 2022
10 Dec 2022
26 Nov 2022 - 7 Dec 2022
Amount
M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old plastered surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for preparation of old plastered surfaces of ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.
M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint of first quality complete all as specified and as directed.
M&L for preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Ltr/10 Sqm complete all as specified and as directed
M&L for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty of minimum 1mm thick complete all as specified and directed.
M&L for complete removal of existing treatment on plastered wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed
M&L for preparation of old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying waxpol (Silicon Make) with soft fine cloth for better shining and finishing complete.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.
M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete as in ceilings in patch works area not exceeding 3 Sqm each, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in two coats 5mm thick in CM (1:4) mixed with integral water proofing compound @ 3% by weight of cement over 10mm thick in CM (1:6) on fair faces of brick work or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed. NOTE: Water proofing compound will be measured and paid separately under relevant item of this schedule.
Supply only Liquid water proofing compound.
M&L for preparation of newly plastered surfaces of ceilings of any description and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of antifungal exterior emulsion over a coat of primer all as per manufacturers instruction as specified and as directed.
M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed.
Cutting out existing cracks in concrete surfaces/ masonry wall/ slab forming grooves of 25mm x 40mm size, cleaning the groove thoroughly with blower, applying primer coat of IPH CC or Hydroseal Siliconate Epoxy resin & Hardener mix in equal proportion with spray gun suitable to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC of Make Harjas Coating & polymers or Hydroseal siliconate epoxy resin, resin hardener and admixture in proportion of 1:1:2 and finally applying sealing coat of the same mix in same manner as the primer coat is applied with following minimum coverage per running metre length of groove
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for glazed ceramic designed coloured tiles in vertical surfaces using size of tiles 350x250x7mm/ 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile with and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for light shade vitrified coloured tiles 10 mm thick (square/ rectangular), area of each tile not exceeding 0.36 sqm, as in floors etc, laid over and including 15mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick granite work (of any type and shade as approved) table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick cement mortar (1:4) bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding (chamfering) the edges complete all as specified and directed.
Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and grid complete all as specified and as directed.
M&L for anodised aluminium snap grid frame work for false ceiling with size of grid 605mm x 605mm all as specified in SSR Part-I 2009, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat iron 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting, drilling, jointing etc., 4mm thick non-asbestos fibre cement building design boards fixed or laid/ inserted to aluminium frame work with screws and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
S&F 18-19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination, fixed with screws to timber frame work or steel frame work as in shelves or shutters, panelling etc fixed in repairs complete all as specified and as directed.
M&L for 18mm thick HDF boarding (fire & water proof) as in cup boards shutter / shelfs exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site, complete all as specified and as directed by Engineer-in-Charge. Make: Bajaj/Axis/Greenply/Archidply or equivalent. NOTE : Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed.
S&F Stainless steel auto closing hinges of standard size complete all as specified and directed.
S&F Stainless steel cupboard handle, fancy type of 150mm size complete all as specified and directed.
S&F Stainless steel tower bolt of 100mm size complete all as specified and directed.
S&F magnetic door catcher for cupboard complete all as specified and directed.
M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
M&L for Cutting chases in PCC block masonry walls, for shelves, lintels, edges of landing and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
S&F 20mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
S&F 25mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings fittings, fixed complete to walls, ceilings or in floors etc., (including concealing, if required) and to any type of pipe complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and connecting to WC, fixed complete all as specified and as directed.
S&F in repairs vitreous China, wash down water closet pan (pedestal pattern), white with PVC seat cover with MS chromuim plated or aluminium hinging device including fixing bolts and connecting to existing flushing cistern and making good disturbed surfaces to match with suroundings, fixed complete all as specified and as directed.
S&F in repairs vitreous China wash hand basin, white, flat back, size 550mm x 400mm including 15mm dia pillar cock, CI bracket, 15mm dia polythene connection including cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste coupling brass chromium plated, PVC waste pipe of suitable length, chain and plug, fixed complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pane (Pedestal pattern white) standard size with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified and as directed. Make : Jaquar (Cat Part No : LYS WHT 0314) or equivalent.
S&F in repairs 32mm dia waste coupling, brass, chromium plated, with long screwed shanks and fly nuts, flanged end embedded in white cement to wash hand basin and other fixed to waste pipe, fixed complete all as specified and as directed.
S&F in repairs 40mm dia waste coupling, brass, chromium plated, with long screwed shanks and fly nuts, flanged end embedded in white cement to wash hand basin and other fixed to waste pipe, fixed complete all as specified and as directed.
M&L for PVC connections 15mm size with PTMT nuts of length 600mm, fixed in repairs complete all as specified and as directed.
S&F in repairs for plastic water closet seat, white, closet pattern with flat bottom and cover and mild steel chromium plated/ PVC or aluminium hinging device complete all as specified and directed.
S&F in repairs 32mm dia PVC(flexible) waste pipe for wash hand basin complete all as specified and as directed
S&F in repairs 38mm dia PVC(flexible) waste pipe for kitchen sink complete all as specified and as directed
S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed
S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts(Make :Prayag Cat No. PIS-50H)
S&F angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-053KN or equivalent in PRAYAG/PARRYWARE
S&F WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-167KNB or equivalent in PRAYAG/PARRYWARE
S&F in repairs chromium plated brass hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg and wall flange complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-281KN or equivalent.
S&F in repairs bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, fixed complete all as specified and as directed. MAKE: JAQUAR Cat part No. CON-107KN or equivalent in PRAYAG/PARRYWARE
S&F toilet paper holder, brass, chromium plated, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. ACN-1153N)
S&F towel ring, brass, chromium plated with round flange, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-7721 or equivalent in PRAYAG/PARRYWARE
S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed. MAKE: JAQUAR Cat part No. AQN-7711 or equivalent in PRAYAG/PARRYWARE
S&F health faucet, brass, chromium plated with 8mm dia, 1.0 m long flexible tube with wall hook, screwed for iron pipe or for brass ferrule 15mm dia or bore, fixed in repairs complete all as specified and as directed. MAKE: ZIM Cat part No. 1624A or equivalent in PRAYAG/PARRYWARE
S&F in repairs stainless steel grating cover 100mm dia fixed with white cement complete all as specified
S&F in repairs 125mm size shower rose chromium plated with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.
S&F kitchen sink without drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs complete all as specified and as directed.
S&F plate rack of 0.63mm thick stainless steel of size 31"x30"x10" with steel shelves, partitions & hanging arrangements for utensils, weight not less than 6.80 Kg, fixed in repairs complete all as specified and as directed. Make : Blue Star, Prayag or equivalent.
S&F PVC cabinet of size 550mm x 520mm x 100 mm having 2 Nos sliding mirror of 4mm thick and size 240mm x 290mm with built-in rack of size 230mm x 150mm x 90mm and CP towel rail of 270mm long with PVC plugs etc., fixed in repairs complete all as specified and as directed. MAKE: SUPREME/PRAYAG
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel/Aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/pins/spring clips complete all as specified and as directed.
S&F 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
M&L for resecuring or easing of door shutters of size exceeding 1 Sqm and not exceeding 2Sqm each for easy closing/opening, and tightening/adjustment of butt hinges in position, adjustment of ther aluminium mongry complete all as specified and as directed
Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.
Taking down shutters of any description, area not exceeding 1.0 Sqm each complete all as specified and as directed.
Taking down shutters of any description, area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing the same opening with new butt hinges complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
S&F 35mm thick second class hard wood plain framed, panelled shutter (any number of panels as directed) with lock rail and panels of timber flat on both sides (feather edged) or 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, fixed to door frame complete all as specified and as directed.
S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fixed to chowkats complete all as specified and as directed.
M&L for Anodised aluminium partition, window and door/ventilator with frame and shutters fully or partly glazed, sliding/openable/fixed fully glazed and panels fixed with panels inserts 12 mm thick pre-laminated particle board/sheet glass including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts etc. The size of aluminium section shall be all as specified in relevant IS Code and SSR Part-I complete all as specified and as directed. NOTES: (i) Supply only floor spring, glass, Imax hinges, SS friction hinges, particle board, aluminium fly proof mesh will be measured and paid separately under relevant items of this BOQ. (ii) Weight of aluminium section only shall be accounted for the purpose of payment. However unit rate quoted shall be deemed to include for cost of rubber beading, neoprene packing, fittings such as handles, butt hinges, tower bolts, rollers for sliding windows, locking arrangement and fixing only of panel inserts of glass/ particle board/aluminium fly proof mesh etc. (iii) Weight of aluminium handle, butt hinges, tower bolts shall not be accounted for payment purpose. (iv) Necessary MS scaffolding required for work shall be deemed to be include in the quoted rate.
Supply only 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side with balancing white lamination, fixed with screws to timber frame work in repairs complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing fixed to door frame complete all as specified and as directed.
S&F 100mm size butt hinges, Stainless steel and fixed complete all as specified and as directed.
S&F 75mm size butt hinges, Stainless steel and fixed complete all as specified and as directed.
S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified & directed by Engineer-in-Charge.
S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F in repairs sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.
S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.
S&F in repairs 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, complete all as specified and as directed.
S&F fixed in repairs 150mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
SUPPLY ONLY aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
S&F in repairs aluminium expanded metal fly proof mesh, cut to required size and shape, with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over a coat of pink primer complete all as specified and as directed.
S&F Powder coated 25mm dia curtain rod, made of mild steel, any colour, with end brackets fancy type including 10 Nos riges per RM complete all as directed and approved by Engr-in-charge
S&F in repairs powder coated 20mm dia curtain rod, made of anodised aluminium, any colour, with end brackets complete all as directed and approved by Engr-in-charge
S&F in repairs door closer, aluminium (extruded section body), hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with screws complete all as specified and as directed.
M&L for seamless gypsum board false ceiling 12 mm thick including for any sunk or raised moulding with 25mm long self drilling/tapping screws having Philips head with joining compound and 48 mm wide fibre tape to provide seam less finish and including GI frame work of seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20mm and 30 mm, web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm c/c / intermediate channel 0.9 mm thick having two equal flanges of 15 mm suspended from soffit at approx 900 mm c/c with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thick having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting across the intermediate channel at 457 mm c/c including hangers 6 mm dia GI adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long and finally applying two coats of oil bound distemper with roller finish over a coat of primer complete all as specified and as directed.
LOOK UP ENTERPRISES
SKV Engineering
GMK Traders
NAWAZ CONSTRUCTIONS
CHANDER SEKER ENTERPRISE
SHUBHAM SHANKAR GAIKWAD
JD Construction
M/s K Moorthi
M/s Ramesh Lal
V KARTHICK
Bidder Name
JD Construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .