Hatrack Assembly

(Right Hand Side) RHS Hatrack assembly/lugguage Rack assembly suitable for Super Express (11 mtr) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-7500 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge 1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray. (3) 'C' type GPSP folded section black powder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4) 14 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 8 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6)2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022120-0, 2022120-1, 2022120-2, 2022120-3, 2022120-4)

(Left Hand Front Side) LHFS Hatrack assembly/lugguage Rack assembly suitable for Super Express (11 mtr) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-2990 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray. (3) 'C' type GPSP folded section black powder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4) 6 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 4 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6) 2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022120-0, 2022120-1, 2022120-2, 2022120-3, 2022120-4)

(Left Hand Rear Side) LHRS Hatrack assembly/lugguage Rack assembly suitable for Super Express (11 mtr) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-3670 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray.(3) 'C' type GPSP folded section black poweder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4) 6 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 4 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6) 2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022120-0, 2022120-1, 2022120-2, 2022120-3, 2022120-4)

(Left Hand Driver Cabin) LHDC Hatrack assembly/lugguage Rack assembly suitable for Super Express (11 mtr) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-720 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray. (3) 'C' type GPSP folded section black powder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4) 2 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 2 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6) 2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022120-0, 2022120-1, 2022120-2, 2022120-3, 2022120-4)

(Right Hand Side) RHS Hatrack assembly/lugguage Rack assembly suitable for Luxury (2x2) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-6935 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge 1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray. (3) 'C' type GPSP folded section black powder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4) 10 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 6 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6) 2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022121-0, 2022121-1, 2022121-2, 2022121-3, 2022121-4)

(Left Hand Side) LHS Hatrack assembly/lugguage Rack assembly suitable for Luxury (2x2) bus consisting of (1) Powder coated confirming to IS:13871 (1993) Grade 'A'. 1.6 mm thick GPSP sheet Confirming to IS:277 for lugguage tray length-6935 mm, Width- 420 mm. (2) Black powder coated confirming to IS:13871 (1993) Grade 'A' aluminium extrusions Profile edge1.6 mm thick confirming to IS:733 (1983) required for inside & outside edge of luaguage tray. (3) 'C' type GPSP folded section black powder coated confirming to IS:13871 (1993) Grade 'A' mounting bracket for proper holding of lugguage tray. (4)10 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section AA for proper holding of lugguage tray (5) 6 Nos. 5 mm thick black powder coated CRMS confirming to IS:1079 rear mounting bracket section BB for proper holding of lugguage tray (6) 2 Nos. FR grade confirming to IS:15061 5 mm thick fiber reinforced plastic end cover suitable for hatrack assembly confirming to AS:476:80:MAY:2013 as per attached detail Drawing no (2022121-0, 2022121-1, 2022121-2, 2022121-3, 2022121-4)