Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC | L1 | Accepted-AOC AOC PLACED ON L1 BIDDER WITH CONTRACT AGREEMENT NO GE/SHL/57 OF 2022-23 | |
| 2 | L2₹45.6 L+₹8.9 L (24.2%)Rejected-Finance C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L2 | Rejected-Finance REJECTED BEING L2 BIDDER |
Tender Value
₹44.7 L
EMD Value
₹89,400
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
PROVN OF DRAIN WITH CULVERT AT HOWMAN GATE TO MT IN ARC AND PROVN OF TRG AIDS STORAGE 04 X ROOM NEAR WEAPON TRG AREA OF 58 GTC AND CONSTR OF TOILET AT TRG AREA CHECK DAM OF 58 GTC AND PROVN OF 02 X GARBAGE PIT AT GOVT MD ACCN K LINE OF SIGNAL UNIT HA
2022_MES_532961_4
GE/SHL/TOKEN-40 OF 2021-22
Open Tender
Civil Works
Works
270 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹89,400
Yes
17 Feb 2023
14 Nov 2022
29 Nov 2022
14 Nov 2022
28 Nov 2022
14 Nov 2022
Amount
Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and paving,drain below or above GL complete all as directed.
Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.
M&L for providing Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregate, as in foundations, filling , flooring mass concrete and other similar works complete all as specified and as directed .
M & L for Pre-cast cement concrete block masonry type C1 , 1:3: 6, 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 , complete all as specified and as directed.
M&L for plastering 15mm thick in CM 1:4 on brick or concrete surfacesof walls to be finished even and smooth (without using extra cement) complete all as specified and as directed.
M&L for 25mm thick cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregate, as in in surface channels and drains and finishing even and smooth without using extra cement complete all as specified and as directed .
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
M&L for providing cement concrete in coping type B0 1:2:4 (12.5mm graded stone aggregate) as in coping all as specified and directed.
Removing excavated materia/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm of hard/dense soil complete all as specified and as directed.
M&L for reinforced cement concrete B1( 1:1.5:3) using 20mm graded aggregate, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like as in pavement slab etc. complete all as specified and as directed.
M&L for Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, all as specified .
M&L for moorum filling in floors laid in lagers n.exc 15cm thick spread levelled and rammed including Watering complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C-2 (40mm graded agg) as in sub flooring complete all as specified and directed.
M&L 40 mm thick PCC 1:2:4 type B-1 (20mm graded aggregate) as in flooring with glass strip finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for 75 mm thick cement concrete as in plinth protection typeC-2, 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with without using extra cement complete all as specified and directed.
M&L 100 mm thick PCC 1:2:4type B-2 (40mm graded agg) as in Footpath, Hardstanding etc & similar work complete all as specified and directed.
Material and labour to rendering 15mm thick in cement mortar (1:4) finishing even and smooth without using extra cement, on wall surface in two layers with Top 5mm thick mixing with integral water proofing compound @ 3% by weight of cement over a backing coat of 10mm complete all as specified and as directed. Note:-WPC to be measured and paid seperately.
M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed.
Supply only for water proofing compound.
M&L preparation of new plaster surfaces and applying two coat of distemper on walls over a primer all as specified and directed.
M&L for Preparation new plastered surfaces of wall and applying two coats of cement base paint over a primer all as specified and directed.
S&F for steel work in posts, rafters,purlins etc including special shape washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade st-240 all as specified and directed..
M&L for preparing to new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed..
S & F of Pre-painted galvalume aluminium zinc coatting GI base corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S & F of Plain, framed, panelled door shutters 2nd class HW 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.
S&F 2nd class HW 30 mm thick Glazed and skeleton, open rebated and prepared to receive glass, gauze, etc. divided into squares (with sash bars any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.
M&L for preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.
S&F 100 mm size butt hinges cold rolled medium weight complete all as specified and directed.
S&F 75 mm size butt hinges cold rolled medium weight complete all as specified and directed.
S&F 150 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed.
S&F 125 mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.
S&F 150 mm size Mild steel press handles, oval type,stove enamelled black complete all as specified and as directed.
S&F 125 mm size Mild steel press handles, oval type,stove enamelled black complete all as specified and as directed.
S&F 250mm length mild steel sliding door bolts, plate type ,stove enamelled black, with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
Material and labour for reinforcement cement concrete for slab using type B1 1:2:4 (20mm grade aggregate) supported on walls,beams and columns in floors, roofs,landings, balconiess, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Use and waste for flat rought finished surface of concrete form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar works; not exceeding 200mm thick (Horizantal or soping ) complete all as specified and as directed.
Use and waste for form work for rought finished surface of concrete to edges of concrete flats,treads, breaks in floors,window cills, concrete railing , openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizantal or sloping all as specified and directed.
M&L 25 mm thick PCC 1:2:4 type B-2 (20mm graded agg) as in sub-base flooring complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes all as specified and directed.
M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall including dismantling wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.
Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
Supply and fix as in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.'
S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors etc complete all as speicified and directed.
S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors etc complete all as speicified and directed.
S & F rotational moulded polythene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) ISI marked hosted and fixed in position MES Schedule 2009, Part – I, complete all as specified and directed.
Supply and fix 20mm bore gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .
Supply and fix 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. .
Supply and fix CP bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed.
S&F 15mm bore stop cock , fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. .
Supply and fix PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge
S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F Health Faucet (ABS) with 120cm PVC flexible tube & ABS wall hook complete all as specified and as directed.
Surface dressing n.exc (not exceeding) 30 cm deep and getting out soft/loose soil complete all as specified.
M&L for 100mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate, as in Sub base for floor complete all as specified and as directed.
M&L Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.
M&L Glazed ceramic colour tiles of size 300x 200 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.
M&L for chequered cement concrete tile with grey cement and pigment (of approved tint) of size 20 cm x 20 cm x 25mm thick over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete all as specified.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLSH IS 694 cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through casing caping with all fittings including plastic laminated sheet cover for mounting switch sockets and drawing continuous earth wire with PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge.
All as per Item No. 1 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed. Make- Cable- Finolex/RR cable/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.
S&F of switch piano flush type 5 amps single pole one way complete one light/fan point controlled by one switch all as specified and directed by Engr-in-Charge
Supply and fix switch socket combination (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.
S & F ceiling rose surface type 65 mm x 50 mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge
Supply and fixing LED batten fittings 1x18/20 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size make Crompton cat no LCTL 18 CDL or equivalent inPhilips/Jaquar/Havells
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Schnieder/L&T/C&S.
Supply and fix MCB, SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make:L&T/ Schnieder/Legrand .
Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make:L&T/ Schnieder/Legrand .
Supplying, fixing and testing of exhaust fan 230 volts , 250mm,plastic body Ventilator DX with outside louvers complete all as specified and directed by Engr-in-Charge. Make Orient/Havells/Bajaj
M & L for cutting of circular holes at any type of wall suitable size for fixing of exhast fan of size 250 mm sweep grouting 04 Nos 100 mm long 12 mm dia stud bolt including make good disturbed surfaces of wall and colour wash for match as per existing all as specified and as directede by Engr-in-Charge
Supply and laying or fixing or passing through pipe, 16 sqmm 2 core 1100 volts grade heavy duty cable with PVC insulated multistranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections complete all as specified and as directed.
S K Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .