COMPREHENSIVE MAINT AND REPAIR AT OFFRS MD ACCN AT SHANKAR VIHAR UNDER GE (SOUTH) DELHI CANTT

Amount

Taking down chowkats or frame with shutters (without taking of shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed

Taking down of shutter of any description exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed

S & F Pressed steel frames of size 105mm x 60mm for doors/cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed

S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed

M & L for Cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in back filling, holdfasts etc, complete all as specified and as directed

S&F 35 mm thick Factory made 2nd class hardwood plain,framed paneled shutters(any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003(part) Kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35 mm thick factory made 2nd class Hard wood glazed and Skelton shutters (any panels) open rebated and prepared to receive wiremesh/glass/gauge etc with all accessory as required and divided into squares edges of framing Plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/gauge etc Size of members of shutters complete all as specified and as directed

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube ,supplying and fixing in opending complete all as specified and as directed

S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing complete all as specified and as directed

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm 2 or more rabates comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick with edge lipping tape allaround 0.8mm to 1.00mm thick, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of with edge lipping tape allaround 0.8mm to 1.00mm thick size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

Taking down & refixing in same opening of shutter of door , windows etc n exc 1.0 Sqm including easing and also refixing builder hardware as required including renewal of unserviceble screws , welding as required etc. complete all as specified and as directed

Taking down of shutter of door , windows etc n exc 1.0 Sqm complete all as specified and as directed

S&F fabricated aluminum window/ventilator with frames (Powder coated) including jointing cleats for fixing builder's hardware & provision for glasspanes/wire mesh including necessary fittings/fixture /aluminum snap beads etc,complete all as specified and as directed by Engr-in-Charge. Note:- (a) Glazing/Wire mesh shall be measured under respective item seperatly (b) Items shall be paid as per weight of aluminium sections (c) The rates quoted shall be inclusive of neoprene beading glazing clips, screws, etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including fixing of aluminium hinges &Aluminium tower bolt in each shutter complete all as specified and as directed.

S&F 4 mm thick plain sheet / frosted glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square including hacking out old brockn glass / new fixing provision (any thickness, any size or at any height) complete all as specified and as directed.

Taking down aluminium windows shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings, rollers and panels, if any required complete all as specified and as directed

S&F in repair stainless steel telescope channel of size 300MM to 500mm complete all as specified and directed.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified and as directed

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complete all as specified and as directed

S&F in repair Steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated , complete: push pull or manual type complete all as specified and as directed

S&F in repair SS curtain rod of 25 mm dia , with fixing brackets, side knobs etc ( 1 MM thick S S / any pattern) complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nail or otherwise complete all as specified and as directed

S&F in repair 18mm thick WPC sheet of minimum density 650 Kg/Cum, Grade-1, factory pre-laminated on both sides (with edge lipping tape allaround 0.8mm to 1.00mm thick) plain colour of rigidlam glossy finish, fixed with screws and solvent cement/adhesive as per manufacturer’s instructions, to form kitchen cabinet sides, top, bottom and internal shelves, complete all as specified and directed. Note: (i) Cupboard accessories i.e. fittings, handles, hinges, shall be measured and paid separately under this schedule. (ii) Quoted rates are deemed to include fixing of cabinet on wall with appropriate rawl plug/dash through fastener (hammer type). (iii) Fabrication and installation of cabinet shall be carried out by authorised vendor of the manufacturer only.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size (with edge lipping tape allaround 0.8mm to 1.00mm thick) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed

S&F in Repair U shaped double stainless steel channel of size 10 mmx 20mmx 1.50 mm fixed to wooden frame including suitable rail / rollers etc complete all as specified and as directed

M & L for preparation of new wooden surfaces / previously unpainted of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as complete all as specified and as directed

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with SS wire staples in door/windows and similar work complete all as specified and as directed

S&F stainless steel butt hinges, ISI marked of size 100 mm complete all as specified and as directed

S&F stainless steel AISI 304 grade barrel tower bolt 150 mm long, extruded section,etc. complete all as specified and as directed

S&F in repair stainless steel AISI 304 grade barrel tower bolt 150 mm long, extruded section,etc. complete all as specified and as directed

S&F stainless steel AISI 304 grade handle 200 mm long, extruded section,etc. complete all as specified and as directed

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and as directed.

S&F in repair stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and as directed

S&F in repair for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size new complete all as specified and as directed

S&F in Repair for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair Stainless steel of AE SI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm, complete all as specified .

S & F 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised complete.

M&L for running welding in repairs including cleaning and preparing surfaces for welding any thickness of metal to be welded such as MS butt hinges to MS frame, broken steel windows or ventilators, iron doors and similar work , finshinh to match with original surface, length to be measured from any one direction complete all as specified and directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint all as specified.

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.

S&F for Mild steel Framed work such as framing of , grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks,plate girder builtup of one beam or tubular section and similar work fixed in position including MS tubing, holdfasts or screws confirming to Fe.290.Gde-E-165 including dismantling complete all as specified.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed complete .

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and direct complete

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete .

S&F false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles with semi perforated 12mm thick micro tengular edged of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specificationsand as per directions of the Engineer-in Charge.

Dismantling of floor of size exc 1.5 Sqm and not exceeding 4.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 4.00 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Dismantling of floor of size not exceeding 1.50 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 1.50 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and directed.

S&F 110 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed

S&F 75 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and dircted.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and dircted.

Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store , complete all as specified and as directed

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed

Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required complete all as specified and as directed

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed

S&F 25mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and as directed.

Supplying and laying of CPVC 25 mm OD pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl brass coupling fittings complete all as specified complete with fitting as required complete all as specified and as directed

Fixing only 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed,complete all as specified and as directed

Fixing only 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed

Fixing only 25 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and as directed

Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and as directed

M&L for 15 mm thick ready mix cement plaster on external surface any faces of brick work or concrete surfaces upto 2 story building , to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified and as directed.

M&L for 15 mm thick ready mix cement plaster in patches n exc 3 sqm on external surface on any faces of brick work or concrete surfaces upto 2 story building , to be finished even and fair with water proofing compound by weight as per manufacturer's instructions complete all as specified .

M&L for 10 to 12 mm thick ready mix plaster on internal surfaces of brick/ concrete surface finished fair even and smooth wihout using extra cement and then applying a coat of liquid water proofing compound as per manufacturers instruction over newly plastered surface,complete all as specified and as directed Note: Liquid water proofing compound shall be measured and paid seperately.

M&L for 5mm thick ready mix plaster on ceiling and finished fair even and smooth without using extra cement,including bonding agent complete all as specified and as directed

M & L for Preparing new plastered or unplastered surfaces of wall/ceiling and applying exterior emulsion paint white or tinted specified as per manufacturer instruction complete all as specified and as directed

M&L for Preparing new plastered or unplastered surfaces of wall/ceiling and applying two coats of oil bound distemper over including one coat of 1 mm thick wall care putty on whole surface, complete all as specified and as directed

Supply only liquid water Proofing Compound, complete all as specified and as directed

Dismentling floors, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed

M&L for Vitrified Ceramic tiles , double charged light shade 8- 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in tile adhessive (type-II),(5-10mm thick) and pointed in white or coloured cement to match complete laid over 15mm thick cement mortar of CM (1:6) complete all as specified and as directed

M&L for vitrified ceramic tiles double charged (light shade) 8-10 mm thick (Square/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in Tile adhessive (type-II) ,(5-10mm thick) and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed

M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm not exceeding 0.38, in floors etc. laid over 20mm thick cement mortar screed bed of CM (1:4) , set and jointed in tile adhessive (type-II) ,(5-10mm thick) and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid on 15mm thick cement screed bed in CM (1:4), set and jointed in Tile adhessive (type-II),(5-10mm thick) and pointed in white/coloured cement to match the shade of tiles, complete all as specified and as directed

M&L Non skid coloured ceramic tiles 7to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in floors laid on 15 mm thick cement screed bed in CM (1:4), set and jointed in tile adhessive (type-II) ,(5-10mm thick) and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed

M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in tile adhessive (type-II) ,(5-10mm thick) and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and as directed

M&L for cutting holes into or through cement concrete slabs, chajjas etc. superficial area n. exc. 100 sq cm reinforced or otherwise incl arrangement for cutting through reinforcement if required complete all as specified and as directed

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device, complete all as specified and as directed

S&F in repairs,wash basin mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to pipe or unions for centre hole wash hand basin , including fittings, complete all as specified and as directed

S&F in repairs, wall mixing valve Hot and Cold water Screwed Down pipe 15mm dia CP brass fancy including joints to steel pipe or unions , including fittings for, complete all as specified and as directed

S&F in repairs, CP brass health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white/ off white, complete all as specified and as directed

S&F in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, complete all as specified and as directed

S&F in repairs, PVC waste pipe 32mm bore, 65cm long plain/ corrugated including suitable adopter,complete all as specified and as directed

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and as directed

S&F in repairs, CP waste coupling 32 mm dia suitable for wash hand basin or kitchen sink, complete all as specified and as directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed

S&F in repairs 15 mm size brass chromium plated Stop valve/angle valves fancy type cast copper alloy, complete all as specified and as directed

S&F in repair 15 mm angle valve / stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions complete all as specified and as directed

S&F in repair bib taps long body 15mm bore, chromium plated cast copper alloy, fancy screwed both ends complete all as specified and as directed

S&F PVC connection 15mm size with brass nut of length 450 mm for hot water pipe, complete all as specified and as directed

S&F in repairs, brass spindles with knobs suitable for concealed stop valves/ bib tap/ pillar tap/ hot and cold mixture etc. all as per sample, complete all as specified and as directed

S&F in repair internal fitting for dual action flushing tank of capacity 10 litre including push buttons complete all as specified and directed

S&F in repairs HDPE PVC lid (cover) white/black colour for 500 to 1000 Litres capacity PVC tanks, complete all as specified and as directed

S&F in repairs corner with Z Black granite piece quadrant shape radius 250-300 mm with min thickness 20mm including cutting, moulding polishing and fixing arrangement on walls at corner etc complete all as specified and as directed.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with CP brass screws, complete all as specified and as directed

M & L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate on chajjas Nexc 1.5 Sqm to rounded or chamfered to provide concave slope , including providing a 5 mm layer with CM 1:3 adding waterproofing chemical as per manufacturer instruction and top layer of 1-1.5mm thick water proof putty and water proof paint including necessary form work complete all as specified and as directed. Note : Cost of above deemed to be included in above quaoted.

Dismentling bricks tiles or terracig tiles single layers on roof and Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish and labour only for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered off and hold fast on edge including necessary form work complete all as specified and as directed

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 1.00 Sqm but not exceeding 3.00 Sqm, which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders, complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exceeding 3.00 Sqm but not exceeding 5.00 Sqm , which is damage due to seepage or any other reason & preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces of that portion and using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders, complete all as specified and as directed

Dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work, complete all as specified and as directed

M&L for rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top white colour 4 layer) hoisted and fixed in position complete all as specified including high quality PTMT ball valve high pressure with polythne float and fly nut , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed

Dismantling of water tanks of any type/pattern not exc 500 ltr and removing from site of work, complete all as specified and as directed

M&L for rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top white colour 4 layer) hoisted and fixed in position complete all as specified including high quality PTMT ball valve high pressure , tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore complete all as specified and as directed

Disconnecting existing tanks of capacity 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed

Disconnecting existing tanks of 1000 liter, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed

S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed

S&F in Repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed

S&F 25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed

Taking down eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal, complete all as specified and as directed

Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed

S&F in repairs for PVC (SWR) bends/Tees of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed

Supply and Fixing 75 mm dia PVC (SWR) pipes single socketed in any length fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed

S&F in repairs for PVC (SWR) bends/Tee etc of radius, suitable for 75 mm dia PVC pipes fixed complete all as specified and as directed

S&F in repairs 15 mm size brass chromium plated Two bay angle valves fancy type cast copper alloy, complete all as specified and as directed

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed

S&F in repair SS towel rack 60 cm long complete all as specifed and directed.

M&L for 50 mm thick cement concrete 1:3:6 type C2 using 20mm graded crushed stone aggregate as in plinth protection, laid to slope of 1 in 24 in alternate basis system, without , each bay shall not exceed 3m in length, 12mm wide joint & 50mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heater hot blow bitumen 85/25 portion and two parts of heated Badarpur sand (by volume) and M&L for coloured Chequered cement concrete tiles with pigment 25 cm x 25cm x 22-25 mm thick set & jointed and pointed in cement slurry to match over 15mm thk screed bed in CM1:6 on plinth , complete all as specified and directed

M/L cement plaster 15mm thick in CM 1:6 on brick or conc surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc complete. NOTE : Rates for water proofing compound/ polymer deemed to be included in the above rates.

M &L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete.

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealent. Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements.

Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injcection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line

Cutting of sapling/bushes including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to two storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces including brooming roof and removing all waste from roof to ouside the MOD land complete all as specified.

Demolition of stone slab and tiles laid in bedded & pointed in any mortar of any description or thickness in foor, aprons etc complete all as specified and as directed.

M & L for Machine cut 20-22 mm thick Kota stone slab flooring as in treads of staircase over cement screed base 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed

M & L for Kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar, laid over cement screed of 10mm in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed

S&F for 16 to 18mm thick Granite slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 20mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L for Udaipur green marble work 16 to 18 mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 20mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed

S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304, 6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all spd and directed by Engr in charge

S&F 75 mm long L Bihari concealed type hydraulic hinges including stainless screw complete all as specified and directed.

S&F MS roller with "C" shape staple, chromium plated for 5.5mm thick sheet glass, complete all as specified and directed.

S& F in repairs staianless plate rack made of 1 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office all as specified and directed by engr-in-charge complete.

M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified .

M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

S & F stainless steel Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F Extruded aluminium alloy handles 125 mm , fabricated D type, anodised complete all

S&F stainless steel AISI 304 grade barrel tower bolt 100 mm long, extruded section,etc. complete all as specified and as directed

Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. (Note:all modular fittings in schedule of items should be suitable as per existing make/model only)

All as per item No 2 above but 5 Amp socket outlet on same board.

All as per item No 2 above One socket outlet 5 Amps on independent board.

All as Item No 2 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

All as Item No. 2 above but for one light point controlled by two 2-way switches with cable 1.5 Sqmm size.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch modular type, 1 way 6A, 1module.

S&F switch, Modular switch 2 way 6A, 1 module.

S&F Modular Socket, 6A - 2/3 pin 2 module.

S&F Modular AC box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement , complete all as specified and directed.

S&F switch modular type 1way 16A, 1module with indicator

S&F Socket 6A/16A - 2/3 pin combined .

S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified.

S&F Modular Bell push 6A 1 module

Supply & Fixing in repair only LED lights fitting 22 W LED 6000K (4Ft),(Warm/ Warm White) 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (Make- Havells/Indoasian/Legrand/Philips)

Supply and fixing in repair LED light fitting 2 feet, 10 watt 220 V AC (Warm/ White) decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete (Make- Bajaj/Philips/Havells/Indoasian/Legrand/Philips)

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate all as specified and directed.

S&F of LED lamp 12 Watt LED Re-Chargeable Bulb complete all as specified and directed.

Taking Down of ceiling Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed.

Taking Down of Exhaust Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. (Note for serial No. 20 & 21: the servicing, greasing, and replaced old unsv connected minor items and make in functioning complete is deemed in this quoted item rate.)

S&F Fan step regulator, 120W - 2 module type complete all as specified and directed.

S&F in replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed.

Supply and fixing in repair round shape slim fit down light LED 15 Watt round recess (Warm/ Warm White) 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size completecomplete all as specified and directed. Make : Havells/ Bajaj/Philips

S&F in replacement of LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed.

S&F ceiling rose surface Bakelite 65x25mm three terminals complete all as specified.

Taking Down of Geyser and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. (Note: The servicing/ descalling and make in functional complete is deemed in this quoted item rate.)

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

Supply and fix in replacement of MCB DB SPN 16 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed .

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement and as directed.

The furniture articles shall be prepaired smooth after removing dents or tightning the frame with welding if required or providing any screw/ nut & washir if required, applying putty for planning of surfaces. All new parts/ area where there is no old paint exists, one coat of primer of best quality as approved shall be applied. The painting shall be done after prepration of surfaces paint OG/ Black/ White/ Sky Blue/ Grey replacing the existing shade/ colour achieving its glossy look. Rest all as directed by Engr in charge/ Accepting officer.

Almirah Large Steel/ Alm MAP or 1/2H 1/2 Shelves etc

Almirah Med Steel

Charpoy Folding IP

Charpoy IP Ply Top : FD/MAP-II/01

Rack Shoe Steel

Teapoy Varandha

Table Computer

Material and labour for polishing to the wooden furniture articles. Polishing the articles shall be cleaned up with a clean cloth and applying suitable sandpaper paper to remove dirt/ dust. The furniture articles/ parts shall be prepaired smooth after removing dirt/ dust etc, making wooden surfaces smooth by applying wood filler and putty on cracks / jonts and applying suitable colour to the base for prepration of base. Two coats of best quality polish as approved shall be applied for glossy look. The polishing shall be done only after prepration of surfaces. Rest all as directed by Engr in Charge/ Accepting Officer.

Bed Plywood Top : FD-246/247

Bin linen

Chair Dining : FD-279/16/250/228/MAP JCO-OR

Chair Dining long back/ MAP

Chair Easy : FD/-229/201/17

Hat Stand with mirror

Peg Table : FD-277/384, DB-3973

Side board

Sofa Set 4 Seats

Sofa Set 5 Seats

Stool drssing

Table Centre : FD-274/ 235

Table Dining 6/8 Pers

Table Wiring

Teapoy : FD-278, 34, 382

Supply and fixing in repairs, SS Chrome plated handles for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2 H 1/2 S after removing old damaged/ wornout chrome handles.

Supply and fixing in repairs, Locks with duplicate keys for Almirah large steel/ Almirah Med steel/ Almirah MAP/ Almirah 1/2H 1/2 S after removing old damaged/ unserviceable locks.

Supply and fixing the SS knobs screw type to wooden steel furniture articles in repair/ replacement after removing the existing damaged knobs making the furniture drawers functional.

Supply and fixing pin type PVC caster wheels to the chair revolving long back/ chair revolving/ chair computer and all other similar chair revolving after removing old damaged caster wheels and fixing the new caster wheels with proper workmanship to make functional the chair.

The contractor is required to provide a person proficient in speaking English & Hindi with a mobile with a SIM, computer, printer & internet connection to access the Complaint Mgt Portal for taking complaints through call VYNUS (Online Complaint Management System) & whatsapp. The place for establishing the complaint cell will be provided by GE. The ibid person shall note down the complaint in register & deploy resources for cleaning complaints within working hours. The report of complaint shall be noted in the register and shall be shown to AGE/JE every day before closure of office/ working hours.Rates for ibid service is deemed to be included on quoted rates of BOQ.

A R construction (BID ID -3503640)

BEHAL TRADERS (BID ID -3509499)

AMIT ASSOCIATES (BID ID -3503416)